Midori-64算法的截断不可能差分分析

分析了Midori-64算法在截断不可能差分攻击下的安全性.首先,通过分析Midori算法加、解密过程差分路径规律,证明了Midori算法在单密钥条件下的截断不可能差分区分器至多6轮,并对6轮截断不可能差分区分器进行了分类;其次,根据分类结果,构造了一个6轮区分器,并给出11轮Midori-64算法的不可能差分分析,恢复了128比特主密钥,其时间复杂度为2^121.4,数据复杂度为2^60.8,存储复杂度为2^96.5.     

Camellia-128的截断差分攻击改进

基于2001年ASIACRYPT（亚密会）会议上Sugita等人提出的9轮截断差分区分器, 提出了Camellia算法的10轮截断差分区分器。进一步地利用这个区分器和密钥恢复中的提前抛弃技术, 给出了12轮Camellia-128的攻击, 恢复出所有密钥的数据复杂度和时间复杂度分别为2⁹⁷和2¹²⁴。这个结果是目前针对Camellia算法的截断差分攻击中最好的。     

Piccolo算法的相关密钥-不可能差分攻击

现有的对于Piccolo算法的安全性分析结果中,除Biclique分析外,以低于穷举搜索的复杂度最长仅攻击至14轮Piccolo-80和18轮Piccolo-128算法.通过分析Piccolo算法密钥扩展的信息泄漏规律,结合算法等效结构,利用相关密钥-不可能差分分析方法,基于分割攻击思想,分别给出了15轮Piccolo-80和21轮Piccolo-128含前向白化密钥的攻击结果.当选择相关密钥量为2⁸时,攻击所需的数据复杂度分别为2^58.6和2^62.3,存储复杂度分别为2^60.6和2^64.3,计算复杂度分别为2⁷⁸和2^82.5;在选择相关密钥量为2⁴时,攻击所需的数据复杂度均为2^62.6和2^62.3,存储复杂度分别为2^64.6和2^64.3,计算复杂度分别为2^77.93和2^124.45.分析结果表明,仅含前向白化密钥的15轮Piccolo-80算法和21轮Piccolo-128算法在相关密钥-不可能差分攻击下是不安全的.     

SMS4算法的不可能差分攻击研究

为研究分组加密算法SMS4抵抗不可能差分攻击的能力,使用了14轮不可能差分路径,给出了相关攻击结果。基于1条14轮不可能差分路径,对16轮和18轮的SMS4算法进行了攻击,改进了关于17轮的SMS4的不可能差分攻击的结果,将数据复杂度降低到O(269.47)。计算结果表明:攻击16轮SMS4算法所需的数据复杂度为O(2¹⁰³),时间复杂度为O(2⁹²);攻击18轮的SMS4算法所需的数据复杂度为O(2¹⁰⁴),时间复杂度为O(2123.84)。     

概率积分及其在PUFFIN算法中的应用

积分分析是一种针对分组密码十分有效的分析方法,其通常利用密文某些位置的零和性质构造积分区分器.基于高阶差分理论,可通过研究密文与明文之间多项式的代数次数来确定密文某些位置是否平衡.从传统的积分分析出发,首次考虑常数对多项式首项系数的影响,提出了概率积分分析方法,并将其应用于PUFFIN算法的安全性分析.针对PUFFIN算法,构造了7轮概率积分区分器,比已有最好的积分区分器轮数长1轮.进一步,利用构造的概率积分区分器,对9轮PUFFIN算法进行密钥恢复攻击.该攻击可恢复92比特轮密钥,攻击的数据复杂度为2^24.8个选择明文,时间复杂度为2^35.48次9轮算法加密,存储复杂度为2²⁰个存储单元.     

11轮3D分组密码算法的中间相遇攻击

针对3D分组密码算法的安全性分析,对该算法抵抗中间相遇攻击的能力进行了评估。基于3D算法的基本结构及S盒的差分性质,减少了在构造多重集时所需的猜测字节数,从而构建了新的6轮3D算法中间相遇区分器。然后,将区分器向前扩展2轮,向后扩展3轮,得到11轮3D算法中间相遇攻击。实验结果表明:构建区分器时所需猜测的字节数为42 B,攻击时所需的数据复杂度约为2⁴⁹⁷个选择明文,时间复杂度约为2^325.3次11轮3D算法加密,存储复杂度约为2³⁴² B。新攻击表明11轮3D算法对中间相遇攻击是不免疫的。     

轻量级分组密码MIBS-80算法的Biclique分析

提出了针对轻量级分组密码算法 MIBS-80 的 Biclique 分析.利用两条独立的相关密钥差分路径,构造了4轮维度为4 的 Biclique 结构,在此基础上对密钥空间进行了划分,结合预计算技术,对每一个密钥子空间进行筛选以降低中间相遇攻击所需的计算复杂度,实施了对12 轮 MIBS-80 的密钥恢复攻击.攻击的数据复杂度为2⁵²个选择明文,计算复杂度约为2^77.13次12 轮 MIBS-80 加密,存储复杂度约为2^8.17,成功实施攻击的概率为1.与已有攻击方法相比,在存储复杂度及成功率方面具有优势.     

7轮ARIA-256的不可能差分新攻击

如何针对分组密码标准ARIA给出新的安全性分析是当前的研究热点。基于ARIA的算法结构,利用中间相遇的思想设计了一个新的4轮不可能差分区分器。基于该区分器,结合ARIA算法特点,在前面加2轮,后面加1轮,构成7轮ARIA-256的新攻击。研究结果表明：攻击7轮ARIA-256所需的数据复杂度约为2120选择明文数据量,所需的时间复杂度约为2219次7轮ARIA-256加密。与已有的7轮ARIA-256不可能差分攻击结果相比较,新攻击进一步地降低了所需的数据复杂度和时间复杂度。     

10轮Midori128的中间相遇攻击

轻量级分组密码由于软硬件实现代价小且功耗低,被广泛地运用资源受限的智能设备中保护数据的安全。Midori是在2015年亚密会议上发布的轻量级分组密码算法,分组长度分为64 bit和128 bit两种,分别记为Midori64和Midori128,目前仍没有Midori128抵抗中间相遇攻击的结果。通过研究Midori128算法基本结构和密钥编排计划特点,结合差分枚举和相关密钥筛选技巧构造了一条7轮中间相遇区分器。再在此区分器前端增加一轮,后端增加两轮,利用时空折中的方法,提出对10轮的Midori128算法的第一个中间相遇攻击,整个攻击需要的时间复杂度为2126.5次10轮Midori128加密,数据复杂度为2125选择明文,存储复杂度2105 128-bit块,这是首次对Midori128进行了中间相遇攻击。     

E2算法的中间相遇攻击

作为AES的候选算法,E2算法由于其特殊的两层SP结构一直是人们研究的热点。研究了E2算法抵抗中间相遇攻击的能力。基于E2算法的结构,利用中间相遇的思想设计了一个4轮区分器,利用该区分器,对E2算法进行了5轮、6轮中间相遇攻击。研究结果表明,E2-128算法对于5轮中间相遇攻击以及E2-256算法对于6轮中间相遇攻击是不抵抗的。这是首次用中间相遇的攻击方法对E2算法进行的分析,相对于已有的结果,该方法降低了所用数据复杂度。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。