甲醇制烯烃催化剂SAPO-34分子筛的改性研究进展

甲醇制烯烃（MTO）被认为是最有希望以煤或天然气为原料替代石油制取烯烃的技术路线。具有CHA结构的SAPO-34分子筛是MTO反应生产乙烯和丙烯最理想的催化剂,但在甲醇转化过程中,芳香烃类中间体受到SAPO-34分子筛八元环微孔结构的限制,使催化剂孔道堵塞并覆盖其酸性位点,造成催化剂积炭失活。为了提高SAPO-34分子筛催化剂的寿命和低碳烯烃的选择性,改善传质并延缓焦炭的沉积至关重要。从构建多级孔结构、减小晶粒尺寸及调控分子筛酸性3个方面出发,总结了SAPO-34分子筛在MTO反应中的研究进展,并对今后催化剂的粒度、孔尺寸、酸性质等方向的改进及发展进行了展望。     

SAPO-34 supported Pt–Sn-based novel catalyst for propane dehydrogenation to propylene

The Pt–Sn-based catalyst was intensified using SAPO-34 as support for direct propane dehydrogenation to propylene. The catalyst was prepared by sequential impregnation method and characterized by XRF, BET, XRD, NH₃-IR, NH₃-TPD, H₂-TPR, HR-TEM and O₂-pulse coke analysis. NH₃-TPD, IR spectra and XRD results suggested that the doping of metals on SAPO-34 did not affect its acidic strength and structural topology of support, respectively. Propylene selectivity of 94% and total olefins selectivity greater than 97% was achieved using Pt–Sn/SAPO-34. The results were compared with Pt–Sn/ZSM-5 under identical conditions. The possible reasons for improvement were the larger surface area, shape selectivity and particular by suitable acidity of SAPO-34.     

Dimethyl ether conversion to light olefins over the SAPO-34/ZrO2 composite catalysts with high lifetime

The SAPO-34/ZrO₂ composite catalysts using ZrO₂ as a binder were prepared and their performance was investigated for the dimethyl ether to olefins (DTO) reaction. The composite catalysts showed higher catalytic lifetimes than the free SAPO-34 catalyst, while maintaining high selectivity toward light olefins. This suggests that the binder-filled space between the SAPO-34 crystals can provide additional diffusion paths for mass transfer. In the SAPO-34/ZrO₂ composite catalysts with different ZrO₂ contents, the SAPO-34(11 wt%)/ZrO₂ composite catalyst showed the highest catalytic lifetime. It can be concluded that ZrO₂ is one of the best binders for the preparation of SAPO-34/binder composite catalysts.     

Chloromethane Conversion to Higher Hydrocarbons over Zeolites and SAPOs

Chloromethane transformations were carried out over zeolites and SAPOs and the conversion and product distribution differed from the porous structure and acidity of the catalysts. Chloromethane was mainly transferred to higher hydrocarbons in gasoline range over most of zeolite catalysts, while SAPOs molecular sieves, SAPO-34 and SAPO-5, showed high selectivity for light olefins production, such as ethylene, propylene and butenes. TG analysis was used to study the coke formation during the transformation and the acid difference of the catalysts was evidenced by Temperature programmed desorption of ammonia. HZSM-5, with high activity and less coke formation, was proved to be a potential catalyst for hydrocarbons production from chloromethane conversion. It is of particular interest that SAPO-34 gave an excellent performance in light olefins production from chloromethane transformation, which may be attributed to the shape selectivity and medium strong acidity of SAPO-34.     

Comparative study of CHA- and AEI-type zeolytic catalysts for the conversion of chloromethane into light olefins

Three pairs of CHA- and AEI-type zeolytic materials with similar crystallite size but with different framework atoms, i.e., silicoaluminophosphate SAPO-34 and SAPO-18, aluminosilicate SSZ-13 and SSZ-39, and titaniumin-corporated TiAPSO-34 and TiAPO-18, were prepared and their catalytic activities of chloromethane into light olefins were compared according to the structure types, as well as acidic properties. The AEI-type catalysts were found to have lower ethene/propene ratios, indicating relatively higher propene selectivity, because their aei-cage was larger compared to the cha-cage. However, all the CHA-type catalysts exhibited better activity and higher selectivity to light olefins. Both H-SAPO-34 and H-TiAPSO-34 showed good catalytic stability over all the reaction times studied here. When compared to H-SAPO-34, however, H-TiAPSO-34 exhibited ca. 20mol% higher selectivity to ethene and propene, despite a similar total density of acid site. This performance may be due to the higher strength of medium acid sites.     

CuZnTiO2/SAPO-34双功能催化剂的设计、制备及其用于CO2加氢制烯烃性能

CO₂加氢经甲醇（含氧中间体）制低碳烯烃工艺路线,可实现成醇、脱水两步反应串联协同进行,打破费托合成产物Anderson-Schulz-Flory（ASF）分布限制,高选择性地制取低碳烯烃。传统甲醇合成Cu基催化剂加氢能力较强,在两步反应中产物以CH₄、低碳烷烃为主。实验设计、制备了CuZnTiO₂/(Zn-)SAPO-34复合催化剂,实现了CO₂加氢在Cu基复合催化剂上高选择性合成C₂～C₄烯烃（约60%）。研究表明,两步反应过程中甲醇体积分数较低（＜6%）,且高温下逆水煤气变换反应严重,导致催化剂酸性变化对产物分布的影响较大。调变两类活性位点比例发现,CH₄的产生与串联反应存在竞争关系,SAPO-34酸量的增加抑制了CH₄的生成,促进串联反应正向进行;合适的酸性有助于生成C₂～C₄烯烃。控制成醇、脱水两类活性位点接触距离可调变烯烃的二次反应,降低加氢能力,改善产物分布。     

Effect of different TEAOH/DEA combinations on SAPO-34’s synthesis and catalytic performance

SAPO-34 molecular sieves were synthesized hydrothermally using different combinations of amine agents [i.e., tetraethyl ammonium hydroxide (TEAOH) and diethylamine (DEA)]. XRD indicated the good crystallinity directed by single or mixed template for CHA structure. The morphology of crystals from SEM photograph was shown to be cubic shape of typical SAPO-34, but distinct in crystal size, increasing from 0.3–0.8 to 3.1–9.1 μm with the amount of DEA in the gel. NH₃-TPD showed similar acid properties for SAPO-34 with TEAOH content from 1.0 to 0.1, but strong acidity synthesized with DEA only. ²⁹Si MAS NMR demonstrated that Si species in framework with single DEA existed in large size of silicon islands, whereas dispersed finely in siliceous islands of smaller size with remarkable Si (nAl, 4-nSi, 0 < n < 4) environments in the samples using mixed template. In the methanol conversion to olefins over different SAPO-34 catalysts, the sample prepared with the mixtures of 50%TEAOH and 50%DEA showed the longest lifetime and high selectivity to C₂⁼~C₃⁼.     

利用聚乙烯亚胺对SAPO-34分子筛进行改性

以阳离子聚合物聚乙烯亚胺(PEI)为介孔模板剂对SAPO-34分子筛进行改性,考察了一定晶化温度和晶化时间下PEI分子量对SAPO-34分子筛孔结构以及比表面积的影响。结果表明,PEI的引入会导致SAPO-34分子筛结晶度下降;随着PEI分子量增加,表面积略有下降,孔体积基本不变,孔径逐渐增大。对制备的介孔SAPO-34分子筛的MTO反应性能进行测试,结果表明,与未加入PEI的分子筛相比,利用PEI改性的分子筛在MTO中丙烯选择性明显提高,烯烃总选择性上升,并且随着PEI分子量增加,烯烃总选择性也随之提高。     

Synthesis of dimethyl carbonate by transesterification with various MgO–CeO2 mixed oxide catalysts

Abstact SAPO-34s with low and high Si content were synthesized and characterized by XRD, XRF, NMR, FTIR and TG-DSC. Different Si content generated no apparent difference in XRD patterns and ³¹P and ²⁷Al MAS NMR spectra. The Si coordination states studied by ²⁹Si MAS NMR predicted the acidity difference caused by Si incorporation. The absorbance of bridge hydroxyls in FTIR spectra also showed the amount of active sites differed with Si content. Both of the two samples were employed as catalysts in the transformation of chloromethane to light olefins and proved to be very selective catalysts for light olefins production. The influences of Si content on chloromethane conversion and product selectivity were investigated in details. Coke amount and coke species were determined by TG-DSC and FTIR. Coke formation was related to the Si content of SAPO-34 and corresponded to the catalytic performance.     

Dehydrogenation of C3–C4 paraffin's to corresponding olefins over slit-SAPO-34 supported Pt-Sn-based novel catalyst

The objective of this work is to discuss the performance of Pt-Sn/slit-SAPO-34 novel catalyst for selective C₃–C₄ dehydrogenation to corresponding light olefins. The metallic contents, acidity, active metallic sites and metallic dispersion were determined using a number of physico-chemical techniques as it gives a justification for superior catalytic activity for dehydrogenation reaction. The Pt-Sn/slit-SAPO-34 catalyst was analyzed for dehydrogenation activity under optimized operating conditions; at atmospheric pressure, hydrogen to alkane (feed) molar ratio is 0.2, weight hourly space velocity 5 h^?1 and temperature 585 °C. Around 40% light alkane conversion and above 95% of total olefins selectivity with 94% propene, 92% n-butene and about 84% iso-butene selectivity were achieved over Pt-Sn/slit-SAPO-34 novel catalyst. The catalyst was parametrically characterized over the above said operating conditions and effects of operating conditions on product distribution were discussed. The coke formation was inherently related to catalyst activity in dehydrogenation reaction and related to surface intermetallic ensemble effects; and ultimately the prominent stakeholder in catalyst deactivation. The novel catalysts also showed very good hydrothermal stability in a continuous reaction–regeneration cycles due to silica-based acidic structure of support. The results obtained over Pt-Sn/slit-SAPO-34 novel catalyst were compared with other Pt-Sn-based ZSM-5 and SAPO-34 supported catalysts of similar active metallic content under identical operating conditions.     

In situ synthesis of SAPO-34 crystals grown onto α-Al2O3 sphere supports as the catalyst for the fluidized bed conversion of dimethyl ether to olefins

SAPO-34 is an excellent catalyst for the conversion of dimethyl ether (DME) to olefins, but because conventionally synthesized SAPO-34 crystals are too small to be used directly in a fluidized bed, they have to be used as, and have the disadvantages of, a spray-dried catalyst. In this study, SAPO-34 crystals were synthesized in situ to grow on the surface of small α-Al₂O₃ spheres to produce a zeolite catalyst for a fluidized bed reactor. The influences of the composition of the crystal gel and surface structure of the support were investigated. The catalytic performance of the zeolite crystals grown on the support (surface zeolite) for the conversion of DME to olefins was investigated in a fixed bed microreactor and a fluidized bed reactor. The experiments showed that these surface SAPO-34 crystals gave the same activity and product selectivity as conventionally synthesized free SAPO-34 crystals and a higher reaction rate (normalized to the weight of SAPO-34) than the spray-dried catalyst. In situ synthesis is a simple and effective way to produce a SAPO-34 catalyst for a fluidized bed reactor.     

再生时间对甲醇制烯烃催化剂水蒸气再生过程的影响

对甲醇制烯烃（MTO）过程失活催化剂采用水蒸气再生不仅可以减少二氧化碳排放,而且能提高低碳烯烃选择性,具有很好的应用前景。本文针对工业MTO过程使用的SAPO-34分子筛催化剂,研究了再生时间对水蒸气再生过程的影响。采用XRD、NH₃-TPD、TGA、FTIR、GC-MS以及N₂物理吸脱附表征手段对再生催化剂样品的晶体结构、酸性、残炭性质以及结构参数进行了表征,并考察再生催化剂的MTO反应性能。结果表明,再生时间越长,再生催化剂上残炭量越低,其酸性、比表面积和孔结构等能较好地恢复,在MTO反应中表现出更长的催化寿命。在再生过程中,催化剂上的残炭物种由芘、菲等大分子量的有机物转变为对MTO具有反应活性的萘等小分子有机物;但是可溶性残炭物种随着再生时间的延长而减少,从而使得初始低碳烯烃选择性有所降低。     

酸性催化剂催化异丙醇脱水制丙烯反应

对HZSM-5及Zn改性HZSM-5、SAPO-34、MCM-41和磷钨酸负载MCM-41分子筛催化剂进行表征,评价固定床反应器中催化异丙醇脱水反应.Zn改性HZSM-5可有效调节催化剂的酸性,提高催化剂选择性,酸性较弱的SAPO-34与Al2O3质量比为5:1混合组成的SAPO-34催化剂和MCM-41分子筛也表现出...     

多级孔ZSM-5/SAPO-34复合分子筛制备及催化MTO性能研究

为制备性能更加优异的甲醇制烯烃（MTO）催化剂及进一步探究多级孔道对MTO催化反应的影响,采用柠檬酸溶液（CA）运用后处理方法对复合分子筛进行刻蚀,成功制备了具有多级孔道结构的ZSM-5/SAPO-34复合分子筛（CA-Z-S）。对复合分子筛的晶相、骨架、孔结构等理化性质进行了表征;将复合分子筛用于催化MTO反应,考察了复合分子筛的催化性能。表征结果表明,使用CA处理对ZSM-5/SAPO-34复合分子筛的形貌、结构会产生影响,使CA-Z-S具有更紧密的复合结构、适量的弱酸中心和多级孔道复合结构。催化测试结果表明,甲醇转化率达到100%时,CA-Z-S的寿命为1 200 min,较SAPO-34提高79%,较ZSM-5/SAPO-34提高30%;CA-Z-S对轻烯烃的选择性达到90.5%,较SAPO-34提高约3.7%。研究结果表明,利用CA对复合分子筛进行后处理,有利于复合分子筛催化MTO反应性能的提升。     

SAPO-34分子筛应用研究进展

综述了SAPO-34分子筛催化低碳物转化制低碳烯烃(甲醇、二甲醚、卤化烷烃制烯烃、乙醇脱水制乙烯)、C_4～C_8直链烯烃/烷烃裂解制低碳烯烃、烷烃氧化或直接脱氢反应制烯烃、催化烃类或H_2选择性还原NO_x、制备膜分离材料以及在发光体材料等领域中的应用。系统分析sAPO-34分子筛在各领域应用进展,有利于理解材料的物化性能对其催化性能、热稳定性及水热稳定性、选择性渗透和分子筛分离性能的影响,有利于实现对SAPO-34分子筛的认识取得突破性进展,拓展SAPO-34分子筛应用领域,并为其他催化材料的设计提供借鉴。     

SAPO-11/HBeta composites for catalytic cracking of 2-butylene: effects of defect structure

SAPO-11/HBeta composite was synthesized by using hydrothermal method (SB-H) and applied as catalyst for cracking of 2-butylene to C₂–C₃ olefins. SB-H sample exhibited comparatively high selectivity and high yield of C₂–C₃ olefins. XRD, IR, ²⁷Al and ³¹P MAS NMR, Py-IR characterizations indicate that defect structure P(AlO₄) _n (n < 4) really existed in SB-H sample. SAPO-11 and HBeta chemically bonded and the defect P(AlO₄) _n (n < 4) formed during the hydrothermal synthesis of SB-H sample. P(AlO₄) _n (n < 4) unit caused new B acidic sites, which increased B acidic amount and B acidic distribution on SB-H sample. The improvement of B acidity decreased apparent active energy of cracking of 2-butylene to C₂–C₃ olefins on SB-H sample. Therefore, the high selectivity and high yield of C₂–C₃ olefins were obtained on SB-H sample in catalytic cracking of 2-butylene.     

不同结构分子筛的甲醇制丙烯催化性能

在常压、空速为1.5 h^-1、反应温度为450℃条件下,考察了4种具有不同拓扑结构的分子筛(SAPO-34、ZSM-48、ZSM-5和beta)在甲醇转化制丙烯(MTP)反应中的催化性能,并对催化剂的积炭失活行为进行了研究。结果表明,从8元环到12元环,分子筛孔口尺寸越小,低碳烯烃(乙烯+丙烯)选择性越高,积炭失活速率也越快。孔道尺寸越大,丙烯/乙烯(P/E)比越高,但产物分布向C₄以上组分偏移,丙烯选择性降低。10元环分子筛具有较高的丙烯选择性,但催化剂的积炭失活速率随孔道体系的不同有很大差异。一维直通孔道的ZSM-48容易积炭失活,而具有三维交叉孔结构的ZSM-5表现出了优异的抗积炭失活性能。不同结构分子筛在MTP反应中催化性能的差异主要归因于分子筛的过渡态择形和产物择形作用的不同。     

Silicoaluminophosphate number eighteen (SAPO-18): a new microporous solid acid catalyst

SAPO-18, which has a microporous framework structure related to, but crystallographically distinct from, that of the solid acid catalyst SAPO-34, was synthesized hydrothermally from a silicoaluminophosphate gel containing N,N-diisopropylethylamine as a structuredirecting template. Although both materials have similar Si/(Si + Al + P) ratios, the content of Brønsted acid sites in SAPO-18 is considerably less than that in SAPO-34. As catalysts for methanol conversion to light olefins, SAPO-18 and SAPO-34 have closely similar initial activity and selectivity, but the lifetime of SAPO-18 is distinctly superior to that of SAPO-34.     

Catalytic performance of CeAPSO-34 molecular sieve with various cerium content for methanol conversion to olefin

A series of CeAPSO-34s with various cerium contents was synthesized and characterized by multiple techniques such as XRD, SEM, BET, ²⁹Si MAS NMR, NH₃-TPD and CO₂-TPD. NH₃-TPD spectra showed that a number of acid sites, especially those of strong acidity, is reduced with the increasing of Ce incorporation. Incorporation of metal ions gave rise to more silica-islands in the CeAPSO-34 framework. CO₂-TPD showed that basic sites on the surface of modified samples are due to the presence of Ce-containing species incorporation into the framework of CeAPSO-34 molecular sieves. The performance of the catalysts was studied in methanol to olefin reactions at 425 °C under the atmospheric pressure. The results showed that the incorporation of cerium ions had great effects on the structure and acidity of the molecular sieves. All SAPO-34 and MeAPSO-34 molecular sieves were the very active and selective catalyst for light olefins production. Cerium incorporation improved the catalyst lifetime and favored the ethylene and propylene generation. However, an excess Ce content resulted in an inferior catalytic performance and stability. Therefore, there existed optimal cerium content for a specific SAPO-34.     

One-step conversion of syngas to light olefins over bifunctional metal-zeolite catalyst

Light olefins(C_2–C_4) are fundamental building blocks for the manufacture of polymers, chemical intermediates,and solvents. In this work, we realized a composite catalyst, comprising Mn_xZr _yoxides and SAPO-34 zeolite,which can convert syngas(CO + H_2) into light olefins. Mn_xZr_yoxide catalysts with different Mn/Zr molar ratios were facilely prepared using the coprecipitation method prior to physical mixing with SAPO-34 zeolite. The redox properties, surface morphology, electronic state, crystal structure, and chemical elemental composition of the catalysts were examined using H_2-TPR, SEM, XPS, XRD, and EDS techniques, respectively. Tandem reactions involved activation of CO and subsequent hydrogenation over the metal oxide catalyst, producing methanol and dimethyl ether as the main reaction intermediates, which then migrated onto SAPO-34 zeolite for light olefins synthesis. Effects of temperature, pressure and reactant gas flow rate on CO conversion and light olefins selectivity were investigated in detail. The Mn_1Zr_2/SAPO-34 catalyst(Mn/Zr ratio of 1:2) attained a CO conversion of 10.8% and light olefins selectivity of 60.7%, at an optimized temperature, pressure and GHSV of 380 °C, 3MPa and 3000 h~(-1) respectively. These findings open avenues to exploit other metal oxides with CO activation capabilities for a more efficient syngas conversion and product selectivity.