共查询到20条相似文献,搜索用时 77 毫秒
1.
近些年来随着我国科技进步及现代化工程建设的进程加快,人们对水泥基材料的高性能及功能性提出更高的要求.纳米SiO2具有活性高,与水泥基材料匹配性高的特点,在提升水泥基体结构和性能方面的研究进展很快.本文介绍了纳米SiO2对水泥基材料水化、机械性能和耐久性影响,并提出影响机制.纳米SiO2发挥着纳米材料在水泥基材料中的作用机理,并协同作用,相互促进.同时,SiO2前躯体和低聚物尺寸小、粘度低和高活性等特点适合用于水泥基材料的表面处理,外界辅助作用可提升纳米SiO2在水泥基材料表面处理深度.在水泥基材料研究应用过程中,由于纳米SiO2的分散性问题会严重影响水泥基体的强度与耐久性,采用机械和载体作用方式可改善纳米SiO2在水泥基材料分散程度.最后介绍了纳米SiO2与功能性纳米材料协同作用,利用纳米SiO2提高水泥基体性能,同时加入功能性纳米材料赋予水泥基体新功能. 相似文献
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
D. G. Gordeev L. F. Gudarenko M. V. Zhernokletov V. G. Kudel’kin M. A. Mochalov 《Combustion, Explosion, and Shock Waves》2008,44(2):177-189
A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation
of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from
the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO2) of density 0.08 g/cm3.
__________
Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008. 相似文献
14.
15.
16.
Jorge Marcelo Romero Soledad Bustillo Hugo Enrique Ramirez Maisuls Nelly Lidia Jorge Manuel Eduardo Gómez Vara Eduardo Alberto Castro Alicia H. Jubert 《International journal of molecular sciences》2007,8(7):688-694
A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out. 相似文献
17.
18.
19.
20.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献