Ventilation and health in non-industrial indoor environments: report from a European multidisciplinary scientific consensus meeting (EUROVEN)

Scientific literature on the effects of ventilation on health, comfort, and productivity in non-industrial indoor environments (offices, schools, homes, etc.) has been reviewed by a multidisciplinary group of European scientists, called EUROVEN, with expertise in medicine, epidemiology, toxicology, and engineering. The group reviewed 105 papers published in peer-reviewed scientific journals and judged 30 as conclusive, providing sufficient information on ventilation, health effects, data processing, and reporting, 14 as providing relevant background information on the issue, 43 as relevant but non-informative or inconclusive, and 18 as irrelevant for the issue discussed. Based on the data in papers judged conclusive, the group agreed that ventilation is strongly associated with comfort (perceived air quality) and health [Sick Building Syndrome (SBS) symptoms, inflammation, infections, asthma, allergy, short-term sick leave], and that an association between ventilation and productivity (performance of office work) is indicated. The group also concluded that increasing outdoor air supply rates in non-industrial environments improves perceived air quality; that outdoor air supply rates below 25 l/s per person increase the risk of SBS symptoms, increase short-term sick leave, and decrease productivity among occupants of office buildings; and that ventilation rates above 0.5 air changes per hour (h-1) in homes reduce infestation of house dust mites in Nordic countries. The group concluded additionally that the literature indicates that in buildings with air-conditioning systems there may be an increased risk of SBS symptoms compared with naturally or mechanically ventilated buildings, and that improper maintenance, design, and functioning of air-conditioning systems contributes to increased prevalence of SBS symptoms.     

Predictions and measurements of the stack effect on indoor airborne virus transmission in a high-rise hospital building

As the viral diseases such as Severe Acute Respiratory Syndrome (SARS) and Influenza A (H1N1) occur in many countries recently, the epidemic of those influenza viruses causes many human casualties. Moreover, the second infection from infected patients particularly within general hospitals frequently takes places due to improperly hospitalized and/or quarantined patients. Accordingly, it becomes a great concern to accommodate safer ventilation system in general hospital wards against such airborne transmitted viruses. It is also a recent trend that many urban general hospitals are designed and constructed as high-rises. If a virus is transmitted through uncontrolled air movement within a hospital and then infected other patients or healthy visitors, it might be impossible to control the spread of the disease. Thus research has been preceded scrutinizing stack effect on the indoor airborne virus transmission in large hospitals by conducting both the field measurement and numerical analysis according to the outdoor temperature and the releasing vertical points of the tracer gas assumed as a viral contaminant. In the field measurement of a high-rise hospital, the indoor airflow was affected by the stack effect of vertical chute of the building. The numerical simulation was verified by comparing its prediction results and the field measurement data. In result, very high possibility has witnessed that the airborne contaminant emitted from the infected patients in the lower floors could be transported to the higher floors through the airflow driven by the stack effect.     

Biomarker versus environmental factors: seasonal variations and modelling multixenobiotic defence (MXD) transport activity in transplanted zebra mussels

The occurrence of biomarker temporal variations linked to environmental factors makes it difficult to distinguish the specific effect of pollution. The present work aims to investigate the seasonal variations of the transport activity of the multixenobiotic defence (MXD), which is used as a biological tool for the monitoring of pollution in aquatic ecosystems. The MXD transport activity was monitored monthly from August 2001 to October 2002 in zebra mussels (Dreissena polymorpha) transplanted to three sites in the Moselle River. The 'efflux method' was used to evaluate functional activity of MXD by assessing rhodamine B efflux with or without an inhibitor (verapamil). Environmental parameters were provided by a French regulatory agency (Water Agency) that monitors river water quality. The results of a principal components analysis describe the seasonal cycle of water characteristics and demonstrate that MXD activity is subjected to significant temporal variations. These data were described with a generalised linear model that enables it to link MXD variability to the seasonal variations of environmental parameters such as temperature or levels of organic contamination. This work proposes a modelling approach and highlights that the occurrence of seasonal variations in MXD response has to be taken into account in the interpretation of in situ monitoring studies.     

A methodology for estimating airborne virus exposures in indoor environments using the spatial distribution of expiratory aerosols and virus viability characteristics

This study investigated the feasibility of using the spatial distribution of expiratory aerosols and the viability functions of airborne viruses to estimate exposures to airborne viruses in an indoor environment under imperfectly mixed condition. A method adopting this approach was tested in an air-conditioned hospital ward. Artificial coughs were produced by aerosolizing a simulated respiratory fluid containing a known concentration of benign bacteriophage. The bacteriophage exposures estimated on the basis of the spatial aerosol distributions and its viability function were in reasonable agreement with those measured directly by biological air sampling and culturing. The ventilation flow and coughing orientation were found to play significant roles in aerosol transport, leading to different spatial distribution patterns in bacteriophage exposure. Bacteriophage exposures decreased with lateral distance from the infector when the infector coughed vertically upward. In contrast, exposures were constant or even increased with distance in the case of lateral coughing. The possibility of incorporating the proposed exposure estimation into a dose-response model for infection risk assessment was discussed. The study has also demonstrated the potential application of viability functions of airborne viral pathogens in exposure assessment and infection risk analysis, which are often unavailable in literature for some important communicable diseases. PRACTICAL IMPLICATIONS: The proposed method makes use of the viability function of the virus and the spatial distribution of the expiratory aerosols for virus exposure estimation. Spatial differences in aerosol distribution and its influences on virus exposure in an air space can be determined. Variations in infectious dose with carrier aerosol size could also be considered. The proposed method may serve as a tool for further investigation of ventilation design and infection control in clinical or other indoor environments.     

Size-resolved dynamics of indoor and outdoor fluorescent biological aerosol particles in a bedroom: A one-month case study in Singapore

This study evaluated the interrelations between indoor and outdoor bioaerosols in a bedroom under a living condition. Two wideband integrated bioaerosol sensors were utilized to measure indoor and outdoor particulate matter (PM) and fluorescent biological airborne particles (FBAPs), which were within a size range of 0.5-20 μm. Throughout this one-month case study, the median proportion of FBAPs in PM by number was 19% (5%; the interquartile range, hereafter) and 17% (3%) for indoors and outdoors, respectively, and those by mass were 78% (12%) and 55% (9%). According to the size-resolved data, FBAPs dominated above 2 and 3.5 μm indoors and outdoors, respectively. Comparing indoor upon outdoor ratios among occupancy and window conditions, the indoor FBAPs larger than 3.16 μm were dominated by indoor sources, while non-FBAPs were mainly from outdoors. The occupant dominated the indoor source of both FBAPs and non-FBAPs. Under awake and asleep, count- and mass-based mean emission rates were 45.9 and 18.7 × 10⁶ #/h and 5.02 and 2.83 mg/h, respectively. Based on indoor activities and local outdoor air quality in Singapore, this study recommended opening the window when awake and closing it during sleep to lower indoor bioaerosol exposure.     

Comparative effects of native filamentous and arbuscular mycorrhizal fungi in the establishment of an autochthonous, leguminous shrub growing in a metal-contaminated soil

The aim of this study was to assess the effectiveness of inoculation with a native arbuscular mycorrhizal (AM) fungus, Glomus mosseae (Nicol. and Gerd.) Gerd. and Trappe, or a filamentous fungus, Penicillium aurantiogriseum Dierckx 1901, on the establishment of Coronilla juncea L. seedlings grown in a polluted, semiarid soil. For that, root and shoot biomass, nutrient uptake, mycorrhizal colonisation and nitrate reductase (NR) and phosphatase activities were analysed. Six months after planting, the shoot biomass of C. juncea was increased only by the inoculation with G. mosseae (by about 62% compared with non-mycorrhizal plants). The shoot NR and root acid phosphatase activities were increased more by inoculation with G. mosseae than with P. aurantiogriseum inoculation. The root NR activity and foliar nutrient contents were increased only by the inoculation with the AM fungus. The root Zn and Cu decreased with the AM fungus. In conclusion, the autochthonous AM fungus was an effective inoculant with regard to stimulating growth and alleviating heavy metal toxicity for plants growing on a soil contaminated by multiple heavy metals. Inoculation with an autochthonous, filamentous fungus does not seem to be a good strategy for phytoremediation of such problematic sites.     

A seasonal study of the mecA gene and Staphylococcus aureus including methicillin-resistant S. aureus in a municipal wastewater treatment plant

The spread of methicillin-resistant Staphylococcus aureus (MRSA), in which the mecA gene mediates resistance, threatens the treatment of staphylococcal diseases. The aims were to determine the effect of wastewater treatment processes on mecA gene concentrations, and the prevalence of S. aureus and MRSA over time. To achieve this a municipal wastewater treatment plant was investigated for the mecA gene, S. aureus and MRSA, using real-time PCR assays. Water samples were collected monthly for one year, at eight sites in the plant, reflecting different aspects of the treatment process. The mecA gene and S. aureus could be detected throughout the year at all sampling sites. MRSA could also be detected, but mainly in the early treatment steps. The presence of MRSA was verified through cultivation from inlet water. The concentration of the mecA gene varied between months and sampling sites, but no obvious seasonal variation could be determined. The wastewater treatment process reduced the mecA gene concentration in most months. Taken together our results show that the mecA gene, S. aureus and MRSA occur over the year at all sites investigated.     

The physicochemical characterisation of microscopic airborne particles in south Wales: a review of the locations and methodologies

As part of the NERC-URGENT thematic programme, research was undertaken into the physicochemistry and bioreactivity of microscopic airborne particulate matter in south Wales. This paper reviews the collecting and characterisation methods used in the research; some of the results obtained are shown as examples. Four main collecting locations were chosen: Cardiff (urban); Port Talbot (urban/industrial); Park Slip West coal opencast pit (industrial/rural); the Black Mountains (rural/background). Collections initially used a 30-l/min Negretti PM10 filter collection system, however in the later stages of the project increased use was made of a 1100-l/min impaction system (nicknamed the super-sucker). This latter device was developed at Harvard University USA, however was adapted and optimised at Cardiff University. Methods for the extraction of PM10 off polycarbonate filters and polyurethane substrates were developed, with particular attention being paid to minimise physical or chemical changes during the extraction, and the extracts being in an appropriate state for bioreactivity assessment. Physicochemical characterisation of the PM10 included the empirical measurement of shape and size using electron microscopy and semi-automated image analysis. The determinations of the water-soluble and -insoluble chemical components were undertaken by ion chromatography and inductive coupled plasma-mass spectrometry. The bioreactivity of south Wales airborne particles is not covered by this review.     

Effect of arbuscular mycorrhizal fungi on plant biomass and the rhizosphere microbial community structure of mesquite grown in acidic lead/zinc mine tailings

Mine tailings in arid and semi-arid environments are barren of vegetation and subject to eolian dispersion and water erosion. Revegetation is a cost-effective strategy to reduce erosion processes and has wide public acceptance. A major cost of revegetation is the addition of amendments, such as compost, to allow plant establishment. In this paper we explore whether arbuscular mycorrhizal fungi (AMF) can help support plant growth in tailings at a reduced compost concentration. A greenhouse experiment was performed to determine the effects of three AMF inocula on biomass, shoot accumulation of heavy metals, and changes in the rhizosphere microbial community structure of the native plant Prosopis juliflora (mesquite). Plants were grown in an acidic lead/zinc mine tailings amended with 10% (w/w) compost amendment, which is slightly sub-optimal for plant growth in these tailings. After two months, AMF-inoculated plants showed increased dry biomass and root length (p < 0.05) and effective AMF colonization compared to controls grown in uninoculated compost-amended tailings. Mesquite shoot tissue lead and zinc concentrations did not exceed domestic animal toxicity limits regardless of whether AMF inoculation was used. The rhizosphere microbial community structure was assessed using denaturing gradient gel electrophoresis (DGGE) profiles of the small subunit RNA gene for bacteria and fungi. Canonical correspondence analysis (CCA) of DGGE profiles showed that the rhizosphere fungal community structure at the end of the experiment was significantly different from the community structure in the tailings, compost, and AMF inocula prior to planting. Further, CCA showed that AMF inoculation significantly influenced the development of both the fungal and bacterial rhizosphere community structures after two months. The changes observed in the rhizosphere microbial community structure may be either a direct effect of the AMF inocula, caused by changes in plant physiology induced by AMF, or a combination of both mechanisms.     

Seasonal and diel distributions of denitrifying and bacterial communities in a hypersaline microbial mat (Camargue, France)

Changes in spatio-temporal distribution of bacterial and denitrifying communities were qualitatively studied in a microbial mat from Camargue (France). During a diel and a seasonal cycle, patterns of 16S rRNA and nitrite reductase genes (nirS and nirK) were compared by denaturing gradient gel electrophoresis (DGGE). Statistical analysis of DGGE profiles showed a significant seasonal shift in the community structure of the nirS-containing bacteria with a winter superficial population that extended in summer, whereas the nirK-containing bacteria seemed more affected by vertical gradients rather than by month-to month-changes. Denitrifying activities remained stable during these sampling times. The bacterial community at the surface of the mat also changed according to season, but appeared stable over a day. Finally, during a diel cycle nirK populations were localized in zones with large fluctuations of environmental parameters (oxygen, pH, and sulfur levels) while nirS populations seemed more restricted to the permanent anoxic layer of the microbial mat.     

Delayed influence of dam storage and discharge on the determination of seasonal proliferations of Microcystis aeruginosa and Stephanodiscus hantzschii in a regulated river system of the lower Nakdong River (South Korea)

This study presents the relationship between the dam hydrology and phytoplankton proliferations in a regulated river system in East Asia. A long-term ecological study reveals that multi-purpose dam regulation on river flow in the Nakdong River (South Korea) affects proliferating patterns of phytoplankton, especially during summer (June-August) and winter (December-next February) as Microcystis aeruginosa and Stephanodiscus hantzschii, respectively, dominate each season by over 80%. Eutrophication was observed in the lower Nakdong River (South Korea) (mean+/-standard deviation: nitrate-N, 2.8+/-0.9 mg L(-1); phosphate-P, 40.3+/-31.3 microg L(-1); chlorophyll a, 45.2+/-84.9 microg L(-1); n=449), and the limnological characteristics responded to climatic variations such as monsoon and summer typhoons. The river basin experiences concentrated rainfall during the rainy season (June-September, over ca. 60% of total annual rainfall). Correlation and cross-correlation for time-delayed relationship revealed the hydrological environments (i.e., quantity of dam storage and discharge) had significantly negative relationship with the population dynamics of the two bloom-forming species for up to the next 2 years. S. hantzschii had clearer relationship with dam storage and discharge, which might be due to the seasonality exhibited by the species. The results support the necessity of "smart flow control" which may enable destruction of bloom formation by the two species with an adequate pulse of discharge generated by upstream dams in the far-east Asian river systems. This would increase the efficiency of water resource management system.     

Indoor and outdoor concentrations of Japanese cedar pollens and total suspended particulates: A case study at a kindergarten in Japan

Japanese cedar pollinosis (JCP) caused by allergenic cedar and cypress pollens is one of major economic and health issues in Japan. The present study reported here aimed to provide basic data to understand the status of early life exposures to airborne cedar and cypress pollens in school settings. In particular, the study investigated relationships between indoor and outdoor concentrations of airborne cedar and cypress pollens and total suspended particulates (TSP) in a kindergarten in Japan. Overall, outdoor concentrations of the airborne pollens and TSP were higher than the indoor concentrations, i.e., indoor to outdoor (I/O) ratios of 0.043–0.055 and 0.545 for the airborne pollens and TSP, respectively. The smaller I/O ratios for the pollens were expected because the larger pollen grains (20–30 μm in diameter) were less likely penetrated to indoor environment than for smaller airborne particulates. The present study also found increased TSP concentrations during the pollen season was likely attributed to increased airborne pollen concentrations. By understanding the status of indoor and outdoor concentrations of airborne cedar and cypress pollens in school settings, early life exposures to these allergenic pollens should be effectively minimized to prevent subsequent progression to JCP symptoms.     

A molecular approach to ascertain the success of "in situ" AM fungi inoculation in the revegetation of a semiarid, degraded land

The positive effect of arbuscular mycorrhizal fungi inoculation on plant establishment under field conditions has been shown. However, whether this effect is related to the survival of the AMF and how the AMF inoculum affects the colonisation of plant roots by the native AMF remain uncertain.In this study, we assessed the AMF community composition in O. europaea roots inoculated “in situ” with three types of AMF inoculum: Glomus sp., G. intraradices and a mixture of Glomus sp. and G. intraradices. All the AMF isolates inoculated showed a good percentage of persistence. Mycorrhizal inoculation with the mixture of Glomus sp. and G. intraradices was the most effective treatment for increasing the AMF diversity in roots 14 months after plantation. Plant growth was increased significantly by all the inocula tested, although plant biomass was not correlated with variation in the AMF diversity or with the AMF inoculum persistence. Thus, it seems that this positive effect was mediated by the interaction between the AMF inoculum and the natural colonisation. Therefore, the application of native AMF isolates in the planting hole may be considered a good strategy for the revegetation of semiarid, degraded soils, in order to reactivate the indigenous AMF populations and improve the performance of O. europaea seedlings, particularly when mixtures of native isolates are used.     

Spatial distribution of arsenic and heavy metals in willow roots from a contaminated floodplain soil measured by X-ray fluorescence spectroscopy

Under changing redox conditions some plants create plaques at their root surface, which may affect the mobility and uptake of As and heavy metals but it is unknown to what extent this also holds true for willows in contaminated floodplain soils. Therefore, willow roots were sampled from a phytoremediation trial in the contaminated floodplain of the river Elbe (Germany), cryofixed, freeze-dried, and cross sections were mapped for the distribution of As, Ca, Cu, Fe, K, Mn, Ni, S and Zn by synchrotron based X-ray fluorescence spectroscopy. The elements Ca, Cu, Ni, S and Zn were concentrated in the aerenchymatic tissue, and not associated with Fe and Mn. Mixed Fe-Mn plaques covered the surface of the willow roots and As was accumulated in these plaques. The observed association pattern between As and Fe was explained by the different sorption/desorption properties of As(III) and As(V). The Cu and Zn intensities were not associated with the intensity of Fe in the plaque, which seems to be a willow-specific difference compared to other wetland plants. These results suggested that willows are especially suited to stabilize low-phytoextractable elements like Cu and As in their roots and rhizosphere. Thus, short rotation coppicing of willows may be a practical approach to mitigate the adverse effects of floodplain soil contamination.     

Sequential treatment of PTA wastewater in a two-stage UASB process: focusing on p-toluate degradation and microbial distribution

Two-stage upflow anaerobic sludge blanket (UASB) process was investigated as an efficient process configuration option for the treatment of purified terephthalic acid (PTA) wastewater. To study its feasibility in a defined condition, synthetic wastewater containing only the major pollutants (i.e., acetate, benzoate, terephthalate and p-toluate) was used. By focusing the role of the second stage on the p-toluate degradation, improved overall COD and p-toluate removal capacities of 4.18 and 1.35 g-thCOD/L·day could be achieved together with a complete COD removal efficiency. In this situation, all the pollutants except p-toluate were completely degraded in the first stage while 38 and 62% of p-toluate originally present in the wastewater were consecutively degraded in the individual stages. The concomitant methane production rate in each stage was 0.91 and 0.35 L/L·day respectively, and the methane yield on p-toluate was determined to be 0.12 L/g-thCOD. Batch tests using the granules obtained from each stage revealed that the acidogenic microorganisms enriched in both stages had a universal ability to degrade all aromatic pollutants present in the PTA wastewater. Moreover, image analysis using scanning electron microscope and confocal laser scanning microscopy combined with fluorescence in situ hybridization technique elucidated that the distribution of acidogens and methanogens within the granule was varied in each stage, which influenced the mass transfer regime resulting in the different pollutant degradation rates during the batch tests.     

Sulphate reduction and the removal of carbon and ammonia in a laboratory-scale constructed wetland

Sulphate is a normal constituent of domestic wastewater and reduced sulphur compounds are known to be potent inhibitors of plant growth and certain microbial activities. However, the knowledge about sulphate reduction and the effect on the removal of C and N in constructed wetlands is still limited. Investigations in laboratory-scale constructed wetland reactors were performed to evaluate the interrelation of carbon and nitrogen removal with the sulphate reduction by use of artificial domestic wastewater. Carbon removal was found to be only slightly affected and remained at high levels of efficiency (75-90%). Only at sulphate reduction intensities above 75 mgl(-1) (50% removal), a decrease of carbon removal of up to 20% was observed. A highly contrary behaviour of ammonia removal was found in general, which decreased exponentially from 75% to 35% related to a linear increase of sulphate reduction up to 75 mgl(-1) (50% removal). Since sulphate removal is considered to be dependant on the load of electron donors, the carbon load of the system was varied. Variation of the load changed the intensities of sulphate reduction immediately, but did not influence the carbon removal effectiveness. Doubling of the carbon concentration of 200 mgl(-1) BOD(5) for domestic wastewater usually led to sulphate reduction of up to 150 mgl(-1) (100% removal). The findings show that, particularly in constructed wetland systems, the sulphur cycle in the rhizosphere is of high importance for performance of the waste water treatment and may initiate a reconsideration of the amount of sulphate present in the tap water systems.     

Occurrence and diversity of Arcobacter spp. along the Llobregat River catchment, at sewage effluents and in a drinking water treatment plant

The presence of Arcobacter species in faecally contaminated environmental waters has previously been studied. However, the ability to eliminate Arcobacter during the water treatment processes that produce drinking water has been little studied. We have investigated the prevalence and diversity of Arcobacter spp. throughout the year at 12 sampling points in the Llobregat River catchment (Catalonia, Spain) including 3 sites at a drinking water treatment plant. Positive samples for Arcobacter spp., came predominantly from the most faecally polluted sites. Recovery rates from all sites were greater in the spring (91.7%) and summer (83.3%) than in autumn and winter (75.0% in both cases), but this trend was not statistically evaluated due to the limited number of samples. Among the 339 colonies analyzed, the most prevalent species by multiplex PCR and 16S rDNA restriction fragment length polymorphism were Arcobacter butzleri (80.2%), followed by Arcobacter cryaerophilus (19.4%) and Arcobacter skirrowii (0.3%). Isolates showed a high genotype diversity as determined by the enterobacterial repetitive intergenic consensus PCR. In fact, 91.2% (309/339) of the colonies had different genotypes, i.e. 248 of them among the 275 isolates of A. butzleri and 60 among the 63 isolates of A. cryaerophilus and 1 genotype of A. skirrowii. Arcobacter was never detected or isolated from finished drinking water, demonstrating that water treatment is effective in removing Arcobacter species.     

Use of nanoparticles to make mineral oil lubricants feasible for use in a residential air conditioner employing hydro-fluorocarbons refrigerants

The application of nano-fluids in refrigerating systems is considered to be a potential way to improve the energy efficiency and reliability of HVAC&R facilities and to make economic the use of environment-friendly refrigerants. In this paper, we report a method that uses nanoparticles to enhance the energy efficiency of retrofitted residential air conditioners (RAC) employing HFCs as alternative refrigerants. The reliability and performance of RAC with nanoparticles in the working fluid have been investigated experimentally. A new mineral-based nano-refrigeration oil (MNRO), formed by blending some nanoparticles (NiFe₂O₄) into naphthene based oil B32, was employed in the RAC using R410a as refrigerant. A method showing how to disperse the NiFe₂O₄ nanoparticles in the mineral oil refrigeration lubricants is presented together with an investigation of their stability. The solubilities of the new MNRO in R134a, R407C, R410a and R425a were measured. The performances of the RAC, such as the cooling/heating capacity, the power input and the energy efficiency ratio, were determined. The results indicate that the mixture of R410a/MNRO works normally in the RAC. The cooling/heating EER of the RAC increased about 6% by replacing the Polyol-Easter oil VG 32 lubricant with MNRO.     

Life-cycle carbon and cost analysis of energy efficiency measures in new commercial buildings

Energy efficiency in new building construction has become a key target to lower nation-wide energy use. The goals of this paper are to estimate life-cycle energy savings, carbon emission reduction, and cost-effectiveness of energy efficiency measures in new commercial buildings using an integrated design approach, and estimate the implications from a cost on energy-based carbon emissions. A total of 576 energy simulations are run for 12 prototypical buildings in 16 cities, with 3 building designs for each building-location combination. Simulated energy consumption and building cost databases are used to determine the life-cycle cost-effectiveness and carbon emissions of each design. The results show conventional energy efficiency technologies can be used to decrease energy use in new commercial buildings by 20-30% on average and up to over 40% for some building types and locations. These reductions can often be done at negative life-cycle costs because the improved efficiencies allow the installation of smaller, cheaper HVAC equipment. These improvements not only save money and energy, but reduce a building’s carbon footprint by 16% on average. A cost on carbon emissions from energy use increases the return on energy efficiency investments because energy is more expensive, making some cost-ineffective projects economically feasible.