Influence of Ca and Suwannee River Humic Acid on aggregation of silicon nanoparticles in aqueous media

Silicon nanoparticles (NPs) have potential applications in many fields including microelectronics, biomedical imaging, and most recently energetics. Even though silicon NPs are thought to be harmless, their full impact on the environment and human health needs further investigation due to their potential increased use and recent toxicity data. Various techniques were used to characterize silicon NPs that are being considered for use in energetics. These techniques included dynamic light scattering (DLS), electron microscopy (EM), X-ray diffraction (XRD) and atomic force microscopy (AFM). Experiments were also conducted on the early stage aggregation kinetics of silicon NPs in the presence of Ca²⁺ and Suwannee River Humic Acid (SRHA). The addition of SRHA in the presence of Ca²⁺ resulted in increased attachment efficiencies and decreased critical coagulation concentration (from 0.4 to 0.1 M). The enhanced aggregation was attributed to bridging generated by SRHA aggregates as evidenced by selected area electron diffraction (SAED) and energy dispersive spectroscopy (EDS). SAED verified the bridging to be amorphous phase comprised of humic substances rather than artifacts of silicon crystallites. Element distribution analyses were also used in the delineation of the silicon NP aggregation mechanisms in the absence and presence of SRHA.     

Effect of dissolved organic matter on the stability of magnetite nanoparticles under different pH and ionic strength conditions

Upon release of engineered nanoparticles (NPs) into the subsurface environment, their fate and transport and hence their potential environmental and public health impacts will largely depend on how stable these NPs are as suspended particles in the natural environment. In this study, we systematically examine the effect of humic acid (HA) on surface charge status and aggregation potential of magnetite (Fe₃O₄) NPs, selected as a model for metal oxide NPs, over a wide range of solution pH and ionic strength. Through zeta potential (ZP) measurements, we found that HA can adsorb to magnetite particles hence modifying their surface charge status. At low loadings, the presence of HA can induce a shift in the point zero of charge of due to partial neutralization of the positive charges on magnetite NPs. At high loadings, however, HA is capable of completely cover magnetite particles giving rise to a suspension ZP profile similar to its own (observed in presence of 20 mg L⁻¹ HA). These impacts on surface charge correspond well with the observed aggregation behaviors in the absence and presence of HA. From the dynamic light scattering (DLS) measurements, fast aggregation, which is independent of solution chemistry, took place when the pH is close to the point zero charge (PZC) and the ionic strength is above the critical coagulation concentration (CCC). At high ionic strength, a small dose (2 mg L⁻¹) of HA stabilized the NPs' suspension significantly. This stabilization effect is substantially enhanced with increasing HA concentration. The calculated DLVO (Derjaguin-Landau-Verwey-Overbeek) interaction energy profiles, using experimentally determined values of Hamaker constant, adequately support the experimental observations. The DLVO analysis further reveals the possible presence of secondary energy minima and the possibility of deaggregation of magnetite agglomerates. The complexation of HA-NPs and the HA effects on NPs aggregations were confirmed by atomic force microscope (AFM) observations.     

Removal of organics in constructed wetlands with horizontal sub-surface flow: a review of the field experience

Constructed wetlands with horizontal sub-surface flow (HF CWs) have successfully been used for treatment various types of wastewater for more than four decades. Most systems have been designed to treat municipal sewage but the use for wastewaters from agriculture, industry and landfill leachate in HF CWs is getting more attention nowadays. The paper summarizes the results from more than 400 HF CWs from 36 countries around the world. The survey revealed that the highest removal efficiencies for BOD₅ and COD were achieved in systems treating municipal wastewater while the lowest efficiency was recorded for landfill leachate. The survey also revealed that HF CWs are successfully used for both secondary and tertiary treatment. The highest average inflow concentrations of BOD₅ (652 mg l^− 1) and COD (1865 mg l^− 1) were recorded for industrial wastewaters followed by wastewaters from agriculture for BOD₅ (464 mg l^− 1) and landfill leachate for COD (933 mg l^− 1). Hydraulic loading data reveal that the highest loaded systems are those treating wastewaters from agriculture and tertiary municipal wastewaters (average hydraulic loading rate 24.3 cm d^− 1). On the other hand, landfill leachate systems in the survey were loaded with average only 2.7 cm d^− 1. For both BOD₅ and COD, the highest average loadings were recorded for agricultural wastewaters (541 and 1239 kg ha^− 1 d^− 1, respectively) followed by industrial wastewaters (365 and 1212 kg ha^− 1 d^− 1, respectively). The regression equations for BOD₅ and COD inflow/outflow concentrations yielded very loose relationships. Much stronger relationships were found for inflow/outflow loadings and especially for COD. The influence of vegetation on removal of organics in HF CWs is not unanimously agreed but most studies indicated the positive effect of macrophytes.     

Effects of nano-scale TiO2, ZnO and their bulk counterparts on zebrafish: acute toxicity, oxidative stress and oxidative damage

The acute toxicity and oxidative effects of nano-scale titanium dioxide, zinc oxide and their bulk counterparts in zebrafish were studied. It was found that although the size distribution of nanoparticles (NPs) was similar to that of the bulk particles in suspension, the acute toxicity of the TiO₂ NPs (96-h LC₅₀ of 124.5 mg/L) to zebrafish was greater than that of the bulk TiO₂, which was essentially non-toxic. The acute toxicities observed for ZnO NPs, a bulk ZnO suspension, and a Zn²⁺ solution were quite similar to each other (96-h LC₅₀ of 4.92, 3.31 and 8.06 mg/L, respectively). In order to explore the underlying toxicity mechanisms of NPs, ·OH radicals generated by NPs in suspensions and five biomarkers of oxidative effects, i.e. superoxide dismutase, catalase activities, malondialdehyde, reduced glutathione and protein carbonyl were investigated. Results showed that after the illumination for 96 h, the quantities of ·OH in the NP suspensions were much higher than ones in the bulk particles suspensions. The malondialdehyde content of zebrafish gills exposed to either illumination or dark were 217.2% and 174.3% of controls, respectively. This discrepancy indicates the occurrence of lipid peroxidation which is partly due to the generation of ·OH. In contrast, exposure to 5 mg/L ZnO NPs and bulk ZnO suspension induced oxidative stress in the gills without oxidative damage. Oxidative effects were more severe in the livers, where the protein carbonyl content, in the light and dark groups exposed to 50 mg/L TiO₂ NPs, was 178.1% and 139.7% of controls, respectively. The malondialdehyde levels in the liver of fish exposed to 5 mg/L ZnO NPs and bulk ZnO were elevated (204.2% and 286.9% of controls, respectively). Additionally, gut tissues exhibited oxidative effects after exposure to NP suspensions. These results highlight the importance of a systematic assessment of metal oxide NP toxicity mechanisms.     

Effect of COD/SO(4)(2-) ratio and sulfide on thermophilic (55 degrees C) sulfate reduction during the acidification of sucrose at pH 6

This study investigated the effect of the COD/SO₄²⁻ ratio (4 and 1) and the sulfide concentration on the performance of thermophilic (55 °C) acidifying (pH 6) upflow anaerobic sludge bed reactors fed with sucrose at an organic loading rate of 4.5 g COD l_reactor⁻¹ day⁻¹. Sulfate reduction efficiencies amounted to 65% and 25-35% for the COD/SO₄²⁻ ratios of 4 and 1, respectively. Acidification was complete at all the tested conditions and the electron flow was similar at the two COD/SO₄²⁻ ratios applied. The stepwise decrease of the sulfide concentrations in the reactors with a COD/SO₄²⁻ ratio of 1 by N₂ stripping caused an immediate stepwise increase in the sulfate reduction efficiencies, indicating a reversible inhibition by sulfide. The degree of reversibility was, however, affected by the growth conditions of the sludge. Acidifying sludge pre-grown at pH 6, at a COD/SO₄²⁻ ratio of 9 and exposed for 150 days to 115 mg l⁻¹ sulfide, showed a slower recovery from the sulfide inhibition than a freshly harvested sludge from a full scale treatment plant (pH 7 and COD/SO₄²⁻=9.5) exposed for a 70 days to 200 mg l⁻¹ sulfide. In the latter case, the decrease of the sulfide concentration from 200 to 45 mg l⁻¹ (35 mg l⁻¹ undissociated sulfide) by N₂ stripping caused an immediate increase of the sulfate reduction efficiency from 35% to 96%.     

Manganese concentrations in Scottish groundwater

Groundwater is increasingly being used for public and private water supplies in Scotland, but there is growing evidence that manganese (Mn) concentrations in many groundwater supplies exceed the national drinking water limit of 0.05 mg l^− 1. This study examines the extent and magnitude of high Mn concentrations in groundwater in Scotland and investigates the factors controlling Mn concentrations. A dataset containing 475 high quality groundwater samples was compiled using new data from Baseline Scotland supplemented with additional high quality data where available. Concentrations ranged up to 1.9 mg l^− 1; median Mn concentration was 0.013 mg l^− 1 with 25th and 75th percentiles 0.0014 and 0.072 mg l^− 1 respectively. The Scottish drinking water limit (0.05 mg l^− 1) was exceeded for 30% of samples and the WHO health guideline (0.4 mg l^− 1) by 9%; concentrations were highest in the Carboniferous sedimentary aquifer in central Scotland, the Devonian sedimentary aquifer of Morayshire, and superficial aquifers. Further analysis using 137 samples from the Devonian aquifers indicated strong redox and pH controls (pH, Eh and dissolved oxygen accounted for 58% of variance in Mn concentrations). In addition, an independent relationship between Fe and Mn was observed, suggesting that Fe behaviour in groundwater may affect Mn solubility. Given the redox status and pH of Scottish groundwaters the most likely explanation is sorption of Mn to Fe oxides, which are released into solution when Fe is reduced.Since the occurrence of elevated Mn concentrations is widespread in groundwaters from all aquifer types, consideration should be given to monitoring Mn more widely in both public and private groundwater supplies in Scotland and by implication elsewhere.     

Treating landfill leachate using passive aeration trickling filters; effects of leachate characteristics and temperature on rates and process dynamics

Biological ammoniacal-nitrogen (NH₄⁺-N) and organic carbon (TOC) treatment was investigated in replicated mesoscale attached microbial film trickling filters, treating strong and weak strength landfill leachates in batch mode at temperatures of 3, 10, 15 and 30 °C. Comparing leachates, rates of NH₄⁺-N reduction (0.126-0.159 g m^− 2 d^− 1) were predominantly unaffected by leachate characteristics; there were significant differences in TOC rates (0.072-0.194 g m^− 2 d^− 1) but no trend relating to leachate strength. Rates of total oxidised nitrogen (TON) accumulation (0.012-0.144 g m^− 2 d^− 1) were slower for strong leachates. Comparing temperatures, treatment rates varied between 0.029-0.319 g NH₄⁺-N m^− 2 d^− 1 and 0.033-0.251 g C m^− 2 d^− 1 generally increasing with rising temperatures; rates at 3 °C were 9 and 13% of those at 30 °C for NH₄⁺-N and TOC respectively. For the weak leachates (NH₄⁺-N < 140 mg l^− 1) complete oxidation of NH₄⁺-N was achieved. For the strong leachates (NH₄⁺-N 883-1150 mg l^− 1) a biphasic treatment response resulted in NH₄⁺-N removal efficiencies of between 68 and 88% and for one leachate no direct transformation of NH₄⁺-N to TON in bulk leachate. The temporal decoupling of NH₄⁺-N oxidation and TON accumulation in this leachate could not be fully explained by denitrification, volatilisation or anammox, suggesting temporary storage of N within the treatment system. This study demonstrates that passive aeration trickling filters can treat well-buffered high NH₄⁺-N strength landfill leachates under a range of temperatures and that leachate strength has no effect on initial NH₄⁺-N treatment rates. Whether this approach is a practicable option depends on a range of site specific factors.     

Comparison of electrocoagulation and chemical coagulation pretreatment for enhanced virus removal using microfiltration membranes

This research studied virus removal by iron electrocoagulation (EC) followed by microfiltration (MF) in water treatment using the MS2 bacteriophage as a tracer virus. In the absence of EC, MF alone achieved less than a 0.5-log removal of MS2 virus, but, as the iron-coagulant dosage increased, the log virus removal increased dramatically. More than 4-log virus removal, as required by the Surface Water Treatment Rule, was achieved with 6-9 mg/L Fe³⁺. The experimental data indicated that at lower iron dosages and pH (<∼8 mg Fe/L and pH 6.3 and 7.3) negatively charged MS2 viruses first adsorbed onto the positively charged iron hydroxide floc particles before being removed by MF. At higher iron dosages and pH (>∼9 mg Fe/L and pH 8.3), virus removal was attributed predominantly to enmeshment and subsequent removal by MF. Additionally, the experimental data showed no obvious influence of ionic strength in the natural water range of 10⁻⁷-10⁻² M on MS2 virus removal by EC-MF. Finally, EC pretreatment significantly outperformed chemical coagulation pretreatment for virus removal. The proposed mechanism for this improved performance by EC is that locally higher iron and virus concentrations and locally lower pH near the anode improved MS2 enmeshment by iron flocs as well as adsorption of MS2 viruses onto the iron floc particles.     

Effects of lanthanum and lanthanum-modified clay on growth, survival and reproduction of Daphnia magna

The novel lanthanum-modified clay water treatment technology (Phoslock^®) seems very promising in remediation of eutrophied waters. Phoslock^® is highly efficient in stripping dissolved phosphorous from the water column and in intercepting phosphorous released from the sediments. The active phosphorous-sorbent in Phoslock^® is the Rare Earth Element lanthanum. A leachate experiment revealed that lanthanum could be released from the clay, but only in minute quantities of 0.13-2.13 μg l⁻¹ for a worst-case Phoslock^® dosage of 250 mg l⁻¹. A life-history experiment with the zooplankton grazer Daphnia magna revealed that lanthanum, up to the 1000 μg l⁻¹ tested, had no toxic effect on the animals, but only in medium without phosphorous. In the presence of phosphorous, rhabdophane (LaPO₄ · nH₂O) formation resulted in significant precipitation of the food algae and consequently affected life-history traits. With increasing amounts of lanthanum, in the presence of phosphate, animals remained smaller, matured later, and reproduced less, resulting in lower population growth rates. Growth rates were not affected at 33 μg La l⁻¹, but were 6% and 7% lower at 100 and 330 μg l⁻¹, respectively, and 20% lower at 1000 μg l⁻¹. A juvenile growth assay with Phoslock^® tested in the range 0-5000 mg l⁻¹, yielded EC₅₀ (NOEC) values of 871 (100) and 1557 (500) mg Phoslock^® l⁻¹ for weight and length based growth rates, respectively. The results of this study show that no major detrimental effects on Daphnia are to be expected from Phoslock^® or its active ingredient lanthanum when applied in eutrophication control.     

Evaluation of nanoscale zerovalent iron particles for trichloroethene degradation in clayey soils

The longevity and reactivity of nanoscale zerovalent iron (nZVI) and palladized bimetallic particles (BNP) were evaluated in batch and column experiments for remediation of a trichloroethene (TCE)-contaminated plume within a clayey soil from Oak Ridge Reservation (ORR). Comparative studies assessing the viability of BNP and nZVI confirmed that particle behavior is severely affected by clay sediments. Surface morphology and composition analyses using SEM and SEM-energy-dispersive spectroscopy spectrum revealed particle agglomeration through the formation of clay-iron aggregates of greater mass during the early phase of the experiment. Batch study results suggest that TCE degradation in ORR clayey soil follows a pseudo-first-order kinetic model exhibiting reaction rate constants (k) of 0.05-0.24 day^− 1 at varied iron-to-soil ratios. Despite high reactivity in water, BNP were less effective in the site-derived clay sediment with calculated TCE removal efficiencies of 98.7% and 19.59%, respectively.A column experiment was conducted to investigate particle longevity and indicator parameters of the TCE degradation process under flow conditions. It revealed that the TCE removal efficiency gradually declined over the course of the experiment from 86-93% to 51-52%, correlating to a progressive increase in oxidation-reduction potential (ORP) from − 485 to − 250 mV and pH drop from 8.2-8.6 to 7.4-7.5. The rate of nZVI deactivation reaction was found to be a first order with a k_d value of 0.0058 day^− 1. SEM images of residual nZVI revealed heavily agglomerated particles. However, despite widespread oxidation and agglomeration, particles managed to maintain some capacity for oxidation. A quantitative analysis of nZVI deactivation has the potential of predicting nZVI longevity in order to improve the design strategy of TCE remediation.     

Rhizosphere acidification of faba bean, soybean and maize

Interspecific facilitation on phosphorus uptake was observed in faba bean/maize intercropping systems in previous studies. The mechanism behind this, however, remained unknown. Under nitrate supply, the difference in rhizosphere acidification potential was studied by directly measuring pH of the solution and by visualizing and quantifying proton efflux of roots between faba bean (Vicia faba L. cv. Lincan No.5), soybean (Glycine max L. cv. Zhonghuang No. 17) and maize (Zea mays L. cv. Zhongdan No.2) in monoculture and intercrop, supplied without or with 0.2 mmol L^− 1 P as KH₂PO₄. The pH of the nutrient solution grown faba bean was lower than initial pH of 6.0 from day 1 to day 22 under P deficiency, whereas the pH of the solution with maize was declined from day 13 after treatment. Growing soybean increased solution pH irrespective of P supply. Under P deficiency, the proton efflux of faba bean both total (315.25 nmol h^− 1 plant^− 1) and specific proton efflux (0.47 nmol h^− 1 cm^− 1) was greater than that those of soybean (21.80 nmol h^− 1 plant^− 1 and 0.05 nmol h^− 1 cm^− 1, respectively). Faba bean had much more ability of rhizosphere acidification than soybean and maize. The result can explain partly why faba bean utilizes sparingly soluble P more effectively than soybean and maize do, and has an important implication in understanding the mechanism behind interspecific facilitation on P uptake by intercropped species.     

Nitrite reduction with hydrous ferric oxide and Fe(II): Stoichiometry, rate, and mechanism

Fe(II)/Fe(III) oxide is an important redox couple in environmental systems. Recent studies have revealed unique characteristics of Fe(II)/Fe(III) oxide and reactions with oxidizing or reducing agents. Nitrite was used as an oxidizing agent in this study in order to probe details of these reactions and hydrous ferric oxide (HFO) was used as the Fe(III) oxide phase. Abiotic nitrite reduction is a significant global producer of nitric oxide (a catalyst for production of tropospheric ozone) and nitrous oxide (a greenhouse gas and contributor to stratospheric ozone depletion). All experiments were conducted at pH 6.8 using a strictly anoxic environment with mass-balance measurements for Fe(II). Oxidation of Fe(II) was negligible in the absence of HFO. The reaction was fast in the presence of HFO and was described by d[Fe(II)]/dt = −k_overall [Fe(II)_diss] [Fe(II)_solid-bound] [NO₂⁻] (k_overall = 2.59 × 10⁻⁷ μM⁻² min⁻¹) for Fe(II)/Fe(III) molar ratios less than 0.30. The reaction was inhibited for higher Fe(II)/HFO ratios. The concentration of solid-bound Fe(II) was constant after an initial equilibration period and the reaction stopped when dissolved Fe(II) was depleted even though substantial solid-bound Fe(II) and nitrite remained. The results regarding rate-dependence and conservation of solid-bound Fe(II) and inhibition of reaction at high Fe(II)/Fe(III) ratios were similar to our earlier results for the Fe(II)/HFO/O₂ system [Park, B., Dempsey, B.A., 2005. Heterogeneous oxidation of Fe(II) on ferric oxide at neutral pH and a low partial pressure of O₂. Environmental Science and Technology 39(17), 6494-6500.].     

Nitrogen and phosphorus removal from an abattoir wastewater in a SBR with aerobic granular sludge

The formation and performance of granular sludge was studied in an 8 l sequencing batch reactor (SBR) treating an abattoir (slaughterhouse) wastewater. Influent concentrations averaged 1520 mg l⁻¹ volatile suspended solids (VSS), 7685 mg l⁻¹ Chemical oxygen demand (COD), 1057 mg l⁻¹ total kjeldahl nitrogen (TKN), 217 mg l⁻¹ total P. The COD loading was 2.6 kg m⁻³ d⁻¹. The SBR was seeded with flocculating sludge from a SBR with an 1 h settle time, but granules developed within 4 days by reducing the settle time to 2 min. The SBR cycle also had 120 min mixed (anaerobic) fill, 220 min aerated react, and 18 min draw/idle. The granules had a mean diameter of 1.7 mm, a specific gravity of 1.035, a density of 62 g VSS l⁻¹, a zone settling velocity (ZSV) of 51 m h⁻¹, and a sludge volume index (SVI) of 22 ml g⁻¹. Without optimizing process conditions, removal of COD and P were over 98%, and removal of N and VSS were over 97%. Nitrification and denitrification occurred simultaneously during react. The results indicate that conventional SBRs treating wastewaters with flocculating sludge can be converted to granular SBRs by reducing the settle time.     

Mercury contamination in the vicinity of a chlor-alkali plant and potential risks to local population

A mercury-cell chlor-alkali plant operated in Estarreja (North-western Portugal) for 50 years causing widespread environmental contamination. Although production by this process ceased in 2002, mercury contamination from the plant remains significant. The main objective of this study was to investigate mercury impact on the nearby environment and potential risks to local population. To assess the level of contamination soil samples were collected from agricultural fields in the vicinity of the plant, extending the study by taking samples of the predominant vegetation suitable for animal and human consumption, water samples, and fish species from a nearby coastal lagoon, to gain a preliminary insight into the potential for contamination of the terrestrial and aquatic food web. To determine population exposure to mercury, hair samples were collected from local residents. Total mercury concentration in the 0-15 cm layer of soil was found to be highly variable, ranging between 0.010 and 91 mg kg^− 1, although mercury contamination of soils was found to be restricted to a confined area. Lolium perenne roots contained between 0.0070 and 2.0 mg kg^− 1, and there is evidence that root systems uptake mercury from the soil. Levels of mercury in the aerial parts of plants ranged between 0.018 and 0.98 mg kg^− 1. It appears that plants with higher mercury concentration in soils and roots also display higher mercury concentration in leaves.Total mercury concentration in water samples ranged between 12 and 846 ng L^− 1, all samples presenting concentrations below the maximum level allowable for drinking water defined in the Portuguese law (1.0 μg L^− 1).Mercury levels in fish samples were below the maximum limit defined in the Portuguese law (0.5 mg kg^− 1), ranging from 0.0040 to 0.24 mg kg^− 1. Vegetables collected presented maximum mercury concentration of 0.17 mg kg^− 1. In general, food is not contaminated and should not be responsible for major human exposure to the metal.Mercury determined in human hair samples (0.090-4.2 mg kg^− 1; mean 1.5 mg kg^− 1) can be considered within normal limits, according to WHO guidelines suggesting that it is not affecting the local population. Despite being subject to decades of mercury emissions, nowadays this pollutant is only found in limited small areas and must not constitute a risk for human health, should these areas be restricted and monitored.Considering the present data, it appears that the population from Estarreja is currently not being affected by mercury levels that still remain in the environment.     

Emission of CO2 and N2O from soil cultivated with common bean (Phaseolus vulgaris L.) fertilized with different N sources

Addition of different forms of nitrogen fertilizer to cultivated soil is known to affect carbon dioxide (CO₂) and nitrous oxide (N₂O) emissions. In this study, the effect of urea, wastewater sludge and vermicompost on emissions of CO₂ and N₂O in soil cultivated with bean was investigated. Beans were cultivated in the greenhouse in three consecutive experiments, fertilized with or without wastewater sludge at two application rates (33 and 55 Mg fresh wastewater sludge ha^− 1, i.e. 48 and 80 kg N ha^− 1 considering a N mineralization rate of 40%), vermicompost derived from the wastewater sludge (212 Mg ha^− 1, i.e. 80 kg N ha^− 1) or urea (170 kg ha^− 1, i.e. 80 kg N ha^− 1), while pH, electrolytic conductivity (EC), inorganic nitrogen and CO₂ and N₂O emissions were monitored. Vermicompost added to soil increased EC at onset of the experiment, but thereafter values were similar to the other treatments. Most of the NO₃⁻ was taken up by the plants, although some was leached from the upper to the lower soil layer. CO₂ emission was 375 C kg ha^− 1 y^− 1 in the unamended soil, 340 kg C ha^− 1 y^− 1 in the urea-amended soil and 839 kg ha^− 1 y^− 1 in the vermicompost-amended soil. N₂O emission was 2.92 kg N ha^− 1 y^− 1 in soil amended with 55 Mg wastewater sludge ha^− 1, but only 0.03 kg N ha^− 1 y^− 1 in the unamended soil. The emission of CO₂ was affected by the phenological stage of the plant while organic fertilizer increased the CO₂ and N₂O emission, and the yield per plant. Environmental and economic implications must to be considered to decide how many, how often and what kind of organic fertilizer could be used to increase yields, while limiting soil deterioration and greenhouse gas emissions.     

Comparison of toxicity and release rates of Cu and Zn from anti-fouling paints leached in natural and artificial brackish seawater

Biocide-containing anti-fouling paints are regulated and approved according to the added active ingredients, such as Cu. Biocide-free paints are considered to be less environmentally damaging and do not need an approval. Zn, a common ingredient in paints with the potential of causing adverse effects has received only minor attention. Laboratory experiments were conducted in artificial brackish seawater (ASW) and natural brackish seawater (NSW) to quantify release rates of Cu and Zn from biocide-containing and biocide-free labeled eroding anti-fouling paints used on commercial vessels as well as leisure boats. In addition, organisms from three trophic levels, the crustacean Nitocra spinipes, the macroalga Ceramium tenuicorne and the bacteria Vibrio fischeri, were exposed to Cu and Zn to determine the toxicity of these metals. The release rate of Cu in NSW was higher from the paints for professional use (3.2-3.6 µg cm⁻² d^− 1) than from the biocide leaching leisure boat paint (1.1 µg cm⁻² d^− 1). Biocide-free paints did leach considerably more Zn (4.4-8.2 µg cm⁻² d^− 1) than biocide-containing leisure boat paint (3.0 µg cm⁻² d^− 1) and ship paints (0.7-2.0 µg cm⁻² d^− 1). In ASW the release rates of both metals were notably higher than in NSW for most tested paints. The macroalga was the most sensitive species to both Cu (EC₅₀ = 6.4 µg l^− 1) and Zn (EC₅₀ = 25 µg l^− 1) compared to the crustacean (Cu, LC₅₀ = 2000 µg l^− 1 Zn, LC₅₀ = 890 µg l^− 1), and the bacteria (Cu, EC₅₀ = 800 µg l^− 1 and Zn, EC₅₀ = 2000 µg l^− 1). The results suggest that the amounts of Zn and Cu leached from anti-fouling paints may attain toxic concentrations in areas with high boat density. To fully account for potential ecological risk associated with anti-fouling paints, Zn as well as active ingredients should be considered in the regulatory process.     

Controlling soluble iron and manganese in a water-supply reservoir using hypolimnetic oxygenation

Soluble metals such as iron (Fe) and manganese (Mn) often reach problematic levels in water-supply reservoirs during summer stratification following the onset of hypolimnetic hypoxia. The behavior of soluble and particulate Fe and Mn was studied following the installation of a hypolimnetic oxygenation system in Carvins Cove Reservoir, a water-supply impoundment managed by the Western Virginia Water Authority. During oxygenation, manganese concentrations were very low in the bulk hypolimnion (<0.05 mg l⁻¹), but high concentrations (>2.0 mg l⁻¹) were still observed in the benthic region close to the sediment, despite near-sediment dissolved oxygen concentrations in excess of 5.0 mg l⁻¹. Oxygenation appears to affect the location of the oxic/anoxic boundary sufficiently to restrict substantial transport of soluble Mn to the bulk water of the hypolimnion. However, the position of the oxic/anoxic boundary was not uniformly affected along the reservoir bottom, allowing horizontal transport of soluble Mn from higher elevations in contact with hypoxic sediments. During one summer, when the oxygen system was turned off for a month, the soluble Mn in the bulk hypolimnion increased substantially. Oxygen concentrations were quickly restored after the system was turned back on, but elevated levels of soluble Mn persisted until the sedimentation rate of detritus through the hypolimnion increased. When operated without interruption, the oxygenation system was able to reduce the bulk average hypolimnion soluble Mn concentration by up to 97%, indicating that source water control of soluble Mn and Fe can be accomplished with hypolimnetic oxygenation in water-supply reservoirs.     

Using magnetic seeds to improve the aggregation and precipitation of nanoparticles from backside grinding wastewater

Backside grinding (BG) wastewater treatment typically requires large quantities of chemicals, i.e. polyaluminum chloride (PAC) coagulant and produces considerable amounts of sludge, increasing the loading and cost of subsequent sludge treatment and disposal processes. This study investigated the effects of the addition of magnetic seeds (FeO*Fe₂O₃) of selected particle sizes and of optimized combinations of magnetic seeds and PAC on the aggregation of silica nanoparticles from BG wastewater and on the sedimentation time at various pH values (5-9). The results show that the turbidity of BG wastewater was significantly reduced by the magnetic aggregation treatment. The dosage of PAC combined with 2.49 g L⁻¹ or 1.24 g L⁻¹ of magnetic seeds was reduced by 83% (from 60 to 10 mg L⁻¹) compared to the conventional process of using only PAC as a coagulant. The turbidity of the BG wastewater, initially 1900-2500 NTU, could also be successfully decreased about to 23 NTU by the addition of 3.74 g L⁻¹ magnetite (FeO*Fe₂O₃) only at pH 5 with an applied magnetic field of 1000 G. Different coagulation conditions using magnetic seeds combined with coagulant resulted in different aggregation performances. The treatment performance was more effective by using two-stage dosing, in which magnetic seeds and PAC were added separately, than that with one-stage dosing, where the magnetic seeds and PAC were added simultaneously during rapid mixing. The two-stage dosing allowed for a reduction in the optimum dosage of magnetic seeds from 3.74 g L⁻¹ to 2.49 g L⁻¹ or 1.24 g L⁻¹ without affecting performance when coupled with 0.01 g L⁻¹ of PAC coagulant. The developed method effectively reduced the production of waste sludge.     

Responses of streams in central Appalachian Mountain region to reduced acidic deposition—Comparisons with other regions in North America and Europe

Data from 5 wet deposition stations and 21 streams during 1980-2006 were analyzed to investigate chemical responses of streams to reduced acidic deposition in the central Appalachian Mountain region of West Virginia, USA. Wet deposition of acidic anions (i.e., sulfate, nitrate, and chloride) and hydrogen ions decreased significantly during the studied time period. Stream sulfate showed a delayed response to the reduced acidic deposition, and showed a decrease in the 2000s (− 5.54 µeq L^− 1 yr^− 1) and the whole period (− 0.49 µeq L^− 1 yr^− 1). No significant trend of stream nitrate + nitrite and chloride was observed. Stream alkalinity increased in the 1990s (+ 23.33 µeq L^− 1 yr^− 1) and the whole period (+ 7.26 µeq L^− 1 yr^− 1). Stream hydrogen ions decreased in the 1990s (− 0.002 µeq L^− 1 yr^− 1), 2000s (− 0.001 µeq L^− 1 yr^− 1), and the whole period (− 0.001 µeq L^− 1 yr^− 1). Compared with most acidic streams and lakes in the United States and Europe, a lower decreasing rate of hydrogen ions and higher increasing rate of alkalinity were observed in the alkaline West Virginian streams in the 1990s. However, due to their initial negative or zero alkalinity values, those acidic streams showed a higher percent increase in alkalinity than that in the alkaline West Virginian streams (from 800 µeq L^− 1 yr^− 1 to 1200 µeq L^− 1 yr^− 1). Total aluminum in the West Virginian streams decreased in the 1990s (− 0.67 µmol L^− 1 yr^− 1) and the whole period (− 0.22 µmol L^− 1 yr^− 1). The current study advanced our understanding of streams' responses to the reduced acidic deposition in the Mid-Appalachians since the passage of the 1970 and 1990 Amendments to the United States Clean Air Act (US CAAA).     

Field solar degradation of pesticides and emerging water contaminants mediated by polymer films containing titanium and iron oxide with synergistic heterogeneous photocatalytic activity at neutral pH

Photocatalytic degradation of phenol, nalidixic acid, mixture of pesticides, and another of emerging contaminants in water was mediated by TiO₂ and iron oxide immobilized on functionalized polyvinyl fluoride films (PVF^f-TiO₂-Fe oxide) in a compound parabolic collector (CPC) solar photoreactor. During degradation, little iron leaching (<0.2 mg L⁻¹) was observed. Phenol was efficiently degraded and mineralized at operational pH < 5 and nalidixic acid degradation was complete even at pH 7, but mineralization stopped at 35%. Pesticide mixture was slowly degraded (50%) after 150 min of irradiation. Degradation of the emergent contaminant mixture was successful for eight compounds and less efficient for six other compounds. The significant reactivity differences between tested compounds were assigned to the differences in structure namely that the presence of complexing or chelating groups enhanced the rates.PVF^f-TiO₂-Fe oxide photoactivity gradually increased during 20 days of experiments. X-ray photoelectron spectroscopy (XPS) measurements revealed significant changes on the catalyst surface. These analyses confirm that during photocatalysis mediated by PVF^f-TiO₂-Fe oxide, some iron leaching led to enlargement of the TiO₂ surface exposed to light, increasing its synergy with iron oxides and leading to enhanced pollutant degradation.