Treating landfill leachate using passive aeration trickling filters; effects of leachate characteristics and temperature on rates and process dynamics

Biological ammoniacal-nitrogen (NH₄⁺-N) and organic carbon (TOC) treatment was investigated in replicated mesoscale attached microbial film trickling filters, treating strong and weak strength landfill leachates in batch mode at temperatures of 3, 10, 15 and 30 °C. Comparing leachates, rates of NH₄⁺-N reduction (0.126-0.159 g m^− 2 d^− 1) were predominantly unaffected by leachate characteristics; there were significant differences in TOC rates (0.072-0.194 g m^− 2 d^− 1) but no trend relating to leachate strength. Rates of total oxidised nitrogen (TON) accumulation (0.012-0.144 g m^− 2 d^− 1) were slower for strong leachates. Comparing temperatures, treatment rates varied between 0.029-0.319 g NH₄⁺-N m^− 2 d^− 1 and 0.033-0.251 g C m^− 2 d^− 1 generally increasing with rising temperatures; rates at 3 °C were 9 and 13% of those at 30 °C for NH₄⁺-N and TOC respectively. For the weak leachates (NH₄⁺-N < 140 mg l^− 1) complete oxidation of NH₄⁺-N was achieved. For the strong leachates (NH₄⁺-N 883-1150 mg l^− 1) a biphasic treatment response resulted in NH₄⁺-N removal efficiencies of between 68 and 88% and for one leachate no direct transformation of NH₄⁺-N to TON in bulk leachate. The temporal decoupling of NH₄⁺-N oxidation and TON accumulation in this leachate could not be fully explained by denitrification, volatilisation or anammox, suggesting temporary storage of N within the treatment system. This study demonstrates that passive aeration trickling filters can treat well-buffered high NH₄⁺-N strength landfill leachates under a range of temperatures and that leachate strength has no effect on initial NH₄⁺-N treatment rates. Whether this approach is a practicable option depends on a range of site specific factors.     

Releasing behavior of zinc in recirculated bioreactor landfill

The purpose of this research was to determine the releasing behavior of zinc in municipal solid waste (MSW) in landfill site with respect to refuse and leachate as an inseparable system. Two simulated bioreactor landfills, one with leachate recirculation and the other without, were operated in room temperature for 320 days. Results showed that the content of zinc in MSW could amount to 591.29 ± 31.33-632.14 ± 18.98 µg g ^− 1 dry weight ^− 1 (DW ^− 1). It exceeded the set standard for “Environmental quality standard for soil” (≤ 500 µg g ^− 1 DW ^− 1) and had high potential environmental risk. The releasing behavior of zinc in refuse mainly experienced speciation of solid-Zn, Zn²⁺, ZnHCO₃⁺, ZnCO₃, Zn(OH)⁺, Zn(OH)₂, Zn(NH₃)₄²⁺, ZnS, etc. Zinc in refuse showed behaviors of staggered migration and retention, which corresponded with the degradation process of refuse in bioreactor landfill. The Zn²⁺ concentration in leachate, which varied correspondingly with releasing behavior of zinc in refuse, were 0.75 mg L ^− 1 to 3.13 mg L ^− 1 and had no great difference in landfill with different operation modes (CL and RL). However, the amount of Zn²⁺ leached out from refuse, which accounted for 28.70 mg and 130.67 mg after 320 day's operation, respectively. More attention should be paid to the inseparable system including refuse and leachate together.     

Greywater treatment by UVC/H2O2

Greywater treatment by UVC/H₂O₂ was investigated with regard to the removal of chemical oxygen demand (COD). A COD reduction from 225 to 30 mg l⁻¹ (overall removal of 87%) was achieved after settling overnight and subsequent irradiation for 3 h with 10 mM H₂O₂. Most of the contaminants were removed by oxidation since only 13% COD was removed by settlement.The removal of COD in the greywater followed a second-order kinetic equation, r = 0.0637[COD][H₂O₂], up to 10 mM H₂O₂. A slightly enhanced COD removal was observed at the initial pH of 10 compared with pH 3 and 7. This was attributed to the dissociation of H₂O₂ to O₂H⁻. The treatment was not affected by total concentration of carbonate (c_T) of at least 3 mM, above which operation between pH 3 and 5 was essential. The initial biodegradability of the settled greywater (as BOD₅:COD) was 0.22. After 2 h UVC/H₂O₂ treatment, a higher proportion of the residual contaminants was biodegradable (BOD₅:COD = 0.41) which indicated its potential as a pre-treatment for a biological process.     

Contribution of the ozonation pre-treatment to the biodegradation of aqueous solutions of 2,4-dichlorophenol

The effect of ozonation on the biodegradability of 100-ppm aqueous solutions of 2,4-dichlorophenol has been investigated. BOD at 5, 10 and 21 days, BOD/COD and BOD/TOC ratios and the average oxidation state are presented. Biodegradability measured as BOD₅/COD ratio was increased from 0 of the original solution to 0.25 at the moment of removing all the initial compound (corresponding to an ozone dose of 0.12 g L⁻¹, 0.48 for BOD₂₁/COD ratio). To test the effect of this pre-treatment, the biological oxidation of these pre-ozonated solutions was performed in two semi-continuous stirred tank reactors, one with non-acclimated sludge and one with acclimated-to-phenol sludge. The study showed that the TOC content of the pre-treated solution could be removed up to 68% by an aerobic biological treatment as well as co-digested with municipal wastewater (TOC removal up to 82%), with similar operating retention times to a municipal wastewater plant (12-24 h). Kinetic studies based on Monod model have also been carried out. Pseudo-first-order kinetic constants were found to be in the range of 0.5-0.8 L g TVSS⁻¹ h⁻¹.     

Oxone/Co oxidation as an advanced oxidation process: Comparison with traditional Fenton oxidation for treatment of landfill leachate

In this paper, the application of Fenton and Oxone/Co²⁺ oxidation processes for landfill leachate treatment was investigated. The removal of the chemical oxygen demand (COD), suspended substances (SS) and the color of the landfill leachate by Fenton oxidation to that by Oxone/Co²⁺ oxidation were compared under optimal operational conditions. For Fenton oxidation process, the optimal conditions were determined as: [H₂O₂] = 80 mmol L⁻¹, [H₂O₂]/[Fe²⁺] = 2.0, initial pH = 2.5, reaction temperature = 37.5 ± 1 °C, reaction time = 160 min, number of stepwise addition = 3. Under the given conditions, 56.9% of the COD removal efficiency was achieved, but the SS and the color of the treated landfill leachate increased due to the generation of a large quantity of ferric hydroxide sludge. In reference to Oxone/Co²⁺ oxidation process, the optimal conditions were determined as: [Oxone] = 4.5 mmol L⁻¹, [Oxone]/[Co²⁺] = 10⁴, pH = 6.5, reaction temperature = 30 ± 1 °C, reaction time = 300 min, number of stepwise addition = 7, the COD, SS and the color removal efficiencies were 57.5, 53.3 and 83.3%, respectively. From this work, it can be concluded that Oxone/Co²⁺ oxidation process demonstrated higher degradation efficiencies of the COD, SS and color for landfill leachate treatment than that by Fenton oxidation process. It also suggested that Oxone/Co²⁺ oxidation process could be considered as one of the most promising technologies for practical applicability to treat landfill leachate in large scale. For further improving the efficiency of Oxone/Co²⁺ oxidation process, we proposed that combination of it with other technologies in future such as ultraviolet, ultrasound and biological methods.     

Nitrogen and phosphorus removal from an abattoir wastewater in a SBR with aerobic granular sludge

The formation and performance of granular sludge was studied in an 8 l sequencing batch reactor (SBR) treating an abattoir (slaughterhouse) wastewater. Influent concentrations averaged 1520 mg l⁻¹ volatile suspended solids (VSS), 7685 mg l⁻¹ Chemical oxygen demand (COD), 1057 mg l⁻¹ total kjeldahl nitrogen (TKN), 217 mg l⁻¹ total P. The COD loading was 2.6 kg m⁻³ d⁻¹. The SBR was seeded with flocculating sludge from a SBR with an 1 h settle time, but granules developed within 4 days by reducing the settle time to 2 min. The SBR cycle also had 120 min mixed (anaerobic) fill, 220 min aerated react, and 18 min draw/idle. The granules had a mean diameter of 1.7 mm, a specific gravity of 1.035, a density of 62 g VSS l⁻¹, a zone settling velocity (ZSV) of 51 m h⁻¹, and a sludge volume index (SVI) of 22 ml g⁻¹. Without optimizing process conditions, removal of COD and P were over 98%, and removal of N and VSS were over 97%. Nitrification and denitrification occurred simultaneously during react. The results indicate that conventional SBRs treating wastewaters with flocculating sludge can be converted to granular SBRs by reducing the settle time.     

Phosphorus removal using Ca-rich hydrated oil shale ash as filter material - The effect of different phosphorus loadings and wastewater compositions

We studied the phosphorus (P) binding capacity of Ca-rich alkaline filter material - hydrated oil shale ash (i.e. hydrated ash) in two onsite pilot-scale experiments (with subsurface flow filters) in Estonia: one using pre-treated municipal wastewater with total phosphorus (TP) concentration of 0.13-17.0 mg L⁻¹ over a period of 6 months, another using pre-treated landfill leachate (median TP 3.4 mg L⁻¹) for a total of 12 months. The results show efficient P removal (median removal of phosphates 99%) in horizontal flow (HF) filters at both sites regardless of variable concentrations of several inhibitors. The P removal efficiency of the hydrated ash increases with increasing P loading, suggesting direct precipitation of Ca-phosphate phases rather than an adsorption mechanism. Changes in the composition of the hydrated ash suggest a significant increase in P concentration in all filters (e.g. from 489.5 mg kg⁻¹ in initial ash to 664.9 mg kg⁻¹ in the HF filter after one year in operation), whereas almost all TP was removed from the inflow leachate (R² = 0.99). Efficiency was high throughout the experiments (median outflow from HF hydrated ash filters 0.05-0.50 mg L⁻¹), and P accumulation did not show any signs of saturation.     

Biodegradability enhancement of a pesticide-containing bio-treated wastewater using a solar photo-Fenton treatment step followed by a biological oxidation process

This work proposes an efficient combined treatment for the decontamination of a pesticide-containing wastewater resulting from phytopharmaceutical plastic containers washing, presenting a moderate organic load (COD = 1662-1960 mg O₂ L⁻¹; DOC = 513-696 mg C L⁻¹), with a high biodegradable organic carbon fraction (81%; BOD₅ = 1350-1600 mg O₂ L⁻¹) and a remaining recalcitrant organic carbon mainly due to pesticides. Nineteen pesticides were quantified by LC-MS/MS at concentrations between 0.02 and 45 mg L⁻¹ (14-19% of DOC). The decontamination strategy involved a sequential three-step treatment: (a) biological oxidation process, leading to almost complete removal of the biodegradable organic carbon fraction; (b) solar photo-Fenton process using CPCs, enhancing the bio-treated wastewater biodegradability, mainly due to pesticides degradation into low-molecular-weight carboxylate anions; (c) and a final polishing step to remove the residual biodegradable organic carbon, using a biological oxidation process. Treatment performance was evaluated in terms of mineralization degree (DOC), pesticides content (LC-MS/MS), inorganic ions and low-molecular-weight carboxylate anions (IC) concentrations. The estimated phototreatment energy necessary to reach a biodegradable wastewater, considering pesticides and low-molecular-weight carboxylate anions concentrations, Zahn-Wellens test and BOD₅/COD ratio, was only 2.3 kJ_UV L⁻¹ (45 min of photo-Fenton at a constant solar UV power of 30 W m⁻²), consuming 16 mM of H₂O₂, which pointed to 52% mineralization and an abatement higher than 86% for 18 pesticides. The biological oxidation/solar photo-Fenton/biological oxidation treatment system achieved pesticide removals below the respective detection limits and 79% mineralization, leading to a COD value lower than 150 mg O₂ L⁻¹, which is in agreement with Portuguese discharge limits regarding water bodies.     

Effect of COD/SO(4)(2-) ratio and sulfide on thermophilic (55 degrees C) sulfate reduction during the acidification of sucrose at pH 6

This study investigated the effect of the COD/SO₄²⁻ ratio (4 and 1) and the sulfide concentration on the performance of thermophilic (55 °C) acidifying (pH 6) upflow anaerobic sludge bed reactors fed with sucrose at an organic loading rate of 4.5 g COD l_reactor⁻¹ day⁻¹. Sulfate reduction efficiencies amounted to 65% and 25-35% for the COD/SO₄²⁻ ratios of 4 and 1, respectively. Acidification was complete at all the tested conditions and the electron flow was similar at the two COD/SO₄²⁻ ratios applied. The stepwise decrease of the sulfide concentrations in the reactors with a COD/SO₄²⁻ ratio of 1 by N₂ stripping caused an immediate stepwise increase in the sulfate reduction efficiencies, indicating a reversible inhibition by sulfide. The degree of reversibility was, however, affected by the growth conditions of the sludge. Acidifying sludge pre-grown at pH 6, at a COD/SO₄²⁻ ratio of 9 and exposed for 150 days to 115 mg l⁻¹ sulfide, showed a slower recovery from the sulfide inhibition than a freshly harvested sludge from a full scale treatment plant (pH 7 and COD/SO₄²⁻=9.5) exposed for a 70 days to 200 mg l⁻¹ sulfide. In the latter case, the decrease of the sulfide concentration from 200 to 45 mg l⁻¹ (35 mg l⁻¹ undissociated sulfide) by N₂ stripping caused an immediate increase of the sulfate reduction efficiency from 35% to 96%.     

Migration behavior of landfill leachate contaminants through alternative composite liners

Four identical pilot-scale landfill reactors with different alternative composite liners were simultaneously operated for a period of about 540 days to investigate and to simulate the migration behaviors of phenolic compounds (phenol, 2-CP, 2-MP, 3-MP, 4-MP, 2-NP, 4-NP, 2,4-DNP, 2,4-DCP, 2,6-DCP, 2,4,5-TCP, 2,4,6-TCP, 2,3,4,6-TeCP, PCP) and heavy metals (Pb, Cu, Zn, Cr, Cd, Ni) from landfill leachate to the groundwater. Alternative landfill liners of four reactors consist of R1: Compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R2: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm + 10 cm, k = 10⁻⁸ m/sn), R3: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + bentonite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn), and R4: Geomembrane (2 mm HDPE) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn) + zeolite liner (2 cm) + compacted clay liner (10 cm, k = 10⁻⁸ m/sn). Wastes representing Istanbul municipal solid wastes were disposed in the reactors. To represent bioreactor landfills, reactors were operated by leachate recirculation. To monitor and control anaerobic degradation in the reactors, variations of conventional parameters (pH, alkalinity, chloride, conductivity, COD, TOC, TKN, ammonia and alcaly metals) were also investigated in landfill leachate samples. The results of this study showed that about 35-50% of migration of organic contaminants (phenolic compounds) and 55-100% of migration of inorganic contaminants (heavy metals) to the model groundwater could be effectively reduced with the use of bentonite and zeolite materials in landfill liner systems. Although leachate contaminants can reach to the groundwater in trace concentrations, findings of this study concluded that the release of these compounds from landfill leachate to the groundwater may potentially be of an important environmental concern based on the experimental findings.     

Removal of organics from leachates by anaerobic filter

A laboratory-scale study was conducted on two anaerobic filters at several loading rates and four hydraulic detention times. Feed substrates were landfill leachates taken from a recently opened landfill (Keele Valley) and from an older site (Brock North) which had been closed for about 8 years. The strong raw leachate from the new landfill had a COD of 14,000 mg l⁻¹, a BOD/COD ratio of 0.7 and a COD/P value of 17,900. The partially stabilized leachate from the older landfill had a COD of only 3750 mg l⁻¹, a BOD/COD ratio of 0.3 and a COD/P value of 30,640.Results from the treatment of the two leachates were compared with those from a previous study of a “mature” landfill (Beare Road). It was demonstrated that the anaerobic filter could reduce the COD of leachate from landfills of different ages by 90%, at loading rates of 1.26–1.45 kg COD m⁻³ d⁻¹. Total biogas production ranged between 400 and 500 l gas kg⁻¹ COD destroyed and methane content between 75 and 85%. No phosphorus addition was required over the loading range studied.     

Long-term (1243 days), low-temperature (4-15 °C), anaerobic biotreatment of acidified wastewaters: Bioprocess performance and physiological characteristics

The feasibility of long-term (>3 years), low-temperature (4-15 °C) and anaerobic bioreactor operation, for the treatment of acidified wastewater, was investigated. A hybrid, expanded granular sludge bed-anaerobic filter bioreactor was seeded with a mesophilic inoculum and employed for the mineralization of moderate-strength (3.75-10 kg chemical oxygen demand (COD) m⁻³) volatile fatty acid-based wastewaters at 4-15 °C. Bioprocess performance was assessed in terms of COD removal efficiency (CODRE), methane biogas concentration, and yield, and biomass retention. Batch specific methanogenic activity assays were performed to physiologically characterise reactor biomass.Despite transient disimprovements, CODRE and methane biogas concentrations exceeded 80% and 65%, respectively, at an applied organic loading rate (OLR) of 10 kg COD m⁻³ d⁻¹ between 9.5 and 15 °C (sludge loading rate (SLR), 0.6 kg COD kg[VSS]⁻¹ d⁻¹). Over 50% of the granular sludge bed was lost to disintegration during operation at 9.5 °C, warranting a reduction in the applied OLR to 3.75-5 kg COD m⁻³ d⁻¹ (SLR, c. 0.4-0.5 kg COD kg[VSS]⁻¹ d⁻¹). From that point forward, remarkably stable and efficient performance was observed during operation at 4-10 °C, with respect to CODRE (≥82%), methane biogas concentration (>70%) and methane yields (>4 l_Methane d⁻¹), suggesting the adaptation of our mesophilic inoculum to psychrophilic operating conditions.Physiological activity assays indicated the development of psychroactive syntrophic and methanogenic populations, including the emergence of putatively psychrophilic propionate-oxidising and hydrogenotrophic methanogenic activity. The data suggest that mesophilic inocula can physiologically adapt to sub-optimal operational temperatures: treatment efficiencies and sludge loading rates at 4 °C (day, 1243) were comparable to those achieved at 15 °C (day 0). Furthermore, long-term, low-temperature bioreactor operation may act as a selective enrichment for psychrophilic methanogenic activity from mesophilic inocula. The observed efficient and stable bioprocess performance highlights the potential for long-term, low-temperature bioreactor operation.     

Comparison of toxicity and release rates of Cu and Zn from anti-fouling paints leached in natural and artificial brackish seawater

Biocide-containing anti-fouling paints are regulated and approved according to the added active ingredients, such as Cu. Biocide-free paints are considered to be less environmentally damaging and do not need an approval. Zn, a common ingredient in paints with the potential of causing adverse effects has received only minor attention. Laboratory experiments were conducted in artificial brackish seawater (ASW) and natural brackish seawater (NSW) to quantify release rates of Cu and Zn from biocide-containing and biocide-free labeled eroding anti-fouling paints used on commercial vessels as well as leisure boats. In addition, organisms from three trophic levels, the crustacean Nitocra spinipes, the macroalga Ceramium tenuicorne and the bacteria Vibrio fischeri, were exposed to Cu and Zn to determine the toxicity of these metals. The release rate of Cu in NSW was higher from the paints for professional use (3.2-3.6 µg cm⁻² d^− 1) than from the biocide leaching leisure boat paint (1.1 µg cm⁻² d^− 1). Biocide-free paints did leach considerably more Zn (4.4-8.2 µg cm⁻² d^− 1) than biocide-containing leisure boat paint (3.0 µg cm⁻² d^− 1) and ship paints (0.7-2.0 µg cm⁻² d^− 1). In ASW the release rates of both metals were notably higher than in NSW for most tested paints. The macroalga was the most sensitive species to both Cu (EC₅₀ = 6.4 µg l^− 1) and Zn (EC₅₀ = 25 µg l^− 1) compared to the crustacean (Cu, LC₅₀ = 2000 µg l^− 1 Zn, LC₅₀ = 890 µg l^− 1), and the bacteria (Cu, EC₅₀ = 800 µg l^− 1 and Zn, EC₅₀ = 2000 µg l^− 1). The results suggest that the amounts of Zn and Cu leached from anti-fouling paints may attain toxic concentrations in areas with high boat density. To fully account for potential ecological risk associated with anti-fouling paints, Zn as well as active ingredients should be considered in the regulatory process.     

Determination and occurrence of phthalates, alkylphenols, bisphenol A, PBDEs, PCBs and PAHs in an industrial sewage grid discharging to a Municipal Wastewater Treatment Plant

Industrial and urban discharges release organic contaminants which might affect the quality of receiving waters if not properly eliminated in Wastewater Treatment Plants (WWTP). This study is aimed to evaluate the source, transport and fate of contaminants of industrial origin in a sewage grid discharging to a WWTP and finally to the sea. The sampling network covered an industrial and urban area and wastewaters, influents and effluents of a WWTP were analyzed using a newly developed multiresidual method to capture a wide range contaminants (phthalates, alkylphenols, bisphenol A, PBDEs, PCBs and PAHs). Alkylphenols and phthalates followed by PAHs were the main compounds detected at levels between 0.01 to 698 µg l^− 1 in the sewage pipelines. At the WWTP influent they were detected at concentrations up to 345 µg l^− 1. The contaminant load was eliminated in a 64-92% during the primary and secondary treatment of the plant. However, alkylphenols, phthalates bisphenol A and traces of PAHs were discharged with the effluent, producing a total net input of 825 g d^− 1 to the sea. The study of wastewaters herein proposed can be used to better predict the loads into WWTP to improve treatment conditions according to specific sewage inputs and to assess the risks associated with the continuous discharge of contaminants to receiving plants.     

Removal of refractory compounds from stabilized landfill leachate using an integrated H2O2 oxidation and granular activated carbon (GAC) adsorption treatment

This study investigated the treatment performances of H₂O₂ oxidation alone and its combination with granular activated carbon (GAC) adsorption for raw leachate from the NENT landfill (Hong Kong) with a very low biodegradability ratio (BOD₅/COD) of 0.08. The COD removal of refractory compounds (as indicated by COD values) by the integrated H₂O₂ and GAC treatment was evaluated, optimized and compared to that by H₂O₂ treatment alone with respect to dose, contact time, pH, and biodegradability ratio. At an initial COD concentration of 8000 mg/L and NH₃-N of 2595 mg/L, the integrated treatment has substantially achieved a higher removal (COD: 82%; NH₃-N: 59%) than the H₂O₂ oxidation alone (COD: 33%; NH₃-N: 4.9%) and GAC adsorption alone (COD: 58%) at optimized experimental conditions (p ≤ 0.05; t-test). The addition of an Fe(II) dose at 1.8 g/L further improved the removal of refractory compounds by the integrated treatment from 82% to 89%. Although the integrated H₂O₂ oxidation and GAC adsorption could treat leachate of varying strengths, treated effluents were unable to meet the local COD limit of less than 200 mg/L and the NH₃-N of lower than 5 mg/L. However, the integrated treatment significantly improved the biodegradability ratio of the treated leachate by 350% from 0.08 to 0.36, enabling the application of subsequent biological treatments for complementing the degradation of target compounds in the leachate prior to their discharge.     

A ferricyanide-mediated activated sludge bioassay for fast determination of the biochemical oxygen demand of wastewaters

Activated sludge was successfully incorporated as the biocatalyst in the fast, ferricyanide-mediated biochemical oxygen demand (FM-BOD) bioassay. Sludge preparation procedures were optimized for three potential biocatalysts; aeration basin mixed liquor, aerobic digester sludge and return activated sludge. Following a 24 h starving period, the return activated sludge and mixed liquor sludges reported the highest oxidative degradation of a standard glucose/glutamic acid (GGA) mixture and the return activated sludge also recorded the lowest endogenous FM-respiration rate. Dynamic working ranges up to 170 mg BOD₅ L⁻¹ for OECD standard solutions and 300 mg BOD₅ L⁻¹ for GGA were obtained. This is a considerable improvement upon the BOD₅ standard assay and most other rapid BOD techniques. Time-series ferricyanide-mediated oxidation of the OECD¹⁷⁰ standard approached that of the GGA¹⁹⁸ standard after 3–6 h. This is noteworthy given the OECD standard is formulated as a synthetic sewage analogue. A highly significant correlation with the BOD₅ standard method (n = 35, p < 0.001, R = 0.952) was observed for a wide diversity of real wastewater samples. The mean degradation efficiency was indistinguishable from that observed for the BOD₅ assay. These results demonstrate that the activated sludge FM-BOD assay may be used for simple, same-day BOD analysis of wastewaters.     

Long-term ammonia removal in a coconut fiber-packed biofilter: Analysis of N fractionation and reactor performance under steady-state and transient conditions

A comprehensive study of long-term ammonia removal in a biofilter packed with coconut fiber is presented under both steady-state and transient conditions. Low and high ammonia loads were applied to the reactor by varying the inlet ammonia concentration from 90 to 260 ppm_v and gas contact times ranging from 20 to 36 s. Gas samples and leachate measurements were periodically analyzed and used for characterizing biofilter performance in terms of removal efficiency (RE) and elimination capacity (EC). Also, N fractions in the leachate were quantified to both identify the experimental rates of nitritation and nitratation and to determine the N leachate distribution. Results showed stratification in the biofilter activity and, thus, most of the NH₃ removal was performed in the lower part of the reactor. An average EC of 0.5 kg N-NH₃ m⁻³ d⁻¹ was obtained for the whole reactor with a maximum local average EC of 1.7 kg N-NH₃ m⁻³ d⁻¹. Leachate analyses showed that a ratio of 1:1 of ammonium and nitrate ions in the leachate was obtained throughout steady-state operation at low ammonia loads with similar values for nitritation and nitratation rates. Low nitratation rates during high ammonia load periods occurred because large amounts of ammonium and nitrite accumulated in the packed bed, thus causing inhibition episodes on nitrite-oxidizing bacteria due to free ammonia accumulation. Mass balances showed that 50% of the ammonia fed to the reactor was oxidized to either nitrite or nitrate and the rest was recovered as ammonium indicating that sorption processes play a fundamental role in the treatment of ammonia by biofiltration.     

Effect of COD/SO4ratio and Fe(II) under the variable hydraulic retention time (HRT) on fermentative hydrogen production

The effect of chemical oxygen demand/sulfate (COD/SO₄²⁻) ratio on fermentative hydrogen production using enriched mixed microflora has been studied. The chemostat system maintained with a substrate (glucose) concentration of 15 g COD L⁻¹ exhibited stable H₂ production at inlet sulfate concentrations of 0-20 g L⁻¹ during 282 days. The tested COD/SO₄²⁻ ratios ranged from 150 to 0.75 (with control) at pH 5.5 with hydraulic retention time (HRT) of 24, 12 and 6 h. The hydrogen production at HRT 6 h and pH 5.5 was not influenced by decreasing the COD/SO₄²⁻ ratio from 150 to 15 (with control) followed by noticeable increase at COD/SO₄²⁻ ratios of 5 and 3, but it was slightly decreased when the COD/SO₄²⁻ ratio further decreased to 1.5 and 0.75. These results indicate that high sulfate concentrations (up to 20,000 mg L⁻¹) would not interfere with hydrogen production under the investigated experimental conditions. Maximum hydrogen production was 2.95, 4.60 and 9.40 L day⁻¹ with hydrogen yields of 2.0, 1.8 and 1.6 mol H₂ mol⁻¹ glucose at HRTs of 24, 12 and 6 h, respectively. The volatile fatty acid (VFA) fraction produced during the reaction was in the order of butyrate > acetate > ethanol > propionate in all experiments. Fluorescence In Situ Hybridization (FISH) analysis indicated the presence of Clostridium spp., Clostridium butyricum, Clostridium perfringens and Ruminococcus flavefaciens as hydrogen producing bacteria (HPB) and absence of sulfate reducing bacteria (SRB) in our study.     

Natural attenuation and characterization of contaminants composition in landfill leachate under different disposing ages

Chemical Oxygen Demand (COD) composition in landfill leachate would vary as the disposal time extended. Leachates with different ages were collected from Laogang Refuse Landfill of Shanghai, the largest landfill in China with a placement scale of 7600 t refuse per day. To characterize COD composition in leachate, samples were size-fractioned into suspended fractions (> 0.45 μm), colloid fraction (0.45 μm < fraction < 1 K Da MW) and dissolved fractions (< 1 KDa MW) based on the molecular weight distribution. The fractions < 0.45 μm (including colloid fraction and dissolved fractions) in leachate were further divided into 6 fractions, i.e. hydrophobic bases (Ho-base), hydrophobic acids (Ho-acid), hydrophobic neutral (Ho-neutral), hydrophilic bases (Hi-base), hydrophilic acids (Hi-acid) and hydrophilic neutral (Hi-neutral). It was found that the ratio of TOC/TC in leachate decreased over time, indicating that the percentage of organic matters in leachate decreased as the disposal time extended. It was also observed that the hydrophobic fraction accounted to about 50% of the total matters presented in the fraction < 0.45 μm of all leachate samples. The main components in < 0.45  μm fraction were the Ho-acid, Hi-acid and Hi-base fractions. The percentage of Ho-acid in leachate decreased from 60.8% (2 a) to 43.2% (12 a). In addition, leachate with different ages was categorized into 3 phases according to the results of Principle component analysis (PCA). TOC/COD ranges of leachate in periods I, II and III were 40-54.6%, 16.9-41.3% and 10-38.9%, respectively, indicating that the COD contribution of non-carbon reduction substances increased over time in leachate. Hence, the corresponding landfill leachate treatment process should be modified according to the leachate characterization. The results obtained in this study might provide the important information for modeling, design, and operation of landfill leachate treatment systems.     

Effects of ozone pre-treatment on diclofenac: Intermediates, biodegradability and toxicity assessment

Diclofenac (DCF), a common analgesic, anti-arthritic and anti-rheumatic drug, is one of the most frequently detected compounds in water. This study deals with the degradation of diclofenac in aqueous solution by ozonation. Biodegradability (BOD₅/COD ratio and Zahn-Wellens test), acute ecotoxicity and inhibition of activated sludge activity were determined in ozonated and non-ozonated samples. Liquid chromatography coupled with time-of-flight mass spectrometry (LC/TOF-MS) was used to identify the intermediates formed in 1 h of ozonation. Eighteen intermediates were identified by these techniques and a tentative degradation pathway for DCF ozonation is proposed.Experimental results show that ozone is efficient at removing DCF: > 99% removal (starting from an initial concentration of 0.68 mmol L^− 1) was achieved after 30 min of ozonation (corresponding to an absorbed ozone dose of 0.22 g L^− 1, which is 4.58 mmol L^− 1). However, only 24% of the substrate was mineralized after 1 h of ozonation. The biodegradability, respiration inhibition in activated sludge and acute toxicity tests demonstrate that ozonation promotes a more biocompatible effluent of waters containing DCF.