共查询到17条相似文献,搜索用时 171 毫秒
1.
2.
3.
4.
针对我国模具制造业的现状及其对知识管理的需求,提出了构建基于本体技术和语义网的模具设计知识管理系统.通过对系统的4个基本功能模块及其关系的分析,建立了模具设计知识管理系统的运行模型,并基于对模具领域设计知识本体的描述,奠定了相关的模具知识量化处理的计算基础.从而使系统实现了模具设计知识库的管理、设计知识的查询和搜索、知识的重用和过程记录以及过程记录中的知识处理等功能.通过对基于本体的模具设计知识管理系统的研究开发和应用,将为我国模具制造企业实现信息化、知识管理以及进一步提高竞争力提供切实可行的途径. 相似文献
5.
产品配置知识本体表达与共享研究 总被引:1,自引:0,他引:1
产品知识的有效表达是产品配置过程中知识共享和知识复用的关键。针对目前在配置知识描述和共享方面存在的一些问题,提出了基于本体的产品配置知识表达方法,分析了产品知识本体的表达层次结构,定义了配置知识的分类层次和产品配置知识本体的特定建模概念,如部件、功能、端口、资源、关系、约束等,并结合水泵产品建立了相应的产品配置知识本体模型,运用本体建模语言DAML+OIL进行水泵产品配置知识描述,从而使配置模型易于表达和共享。 相似文献
6.
为解决MBD(Model Based Definition)体系下三维标注信息的快速标注和重用问题,构建了一种三维标注信息知识模型。通过对飞机设计过程中的标注信息进行分析,提出了三维标注信息数据模型的概念,分析了标注信息的分类及其与飞机设计环境以及过程的关系,在此基础上,构建了本体模型框架。结合所定义的本体构建流程,完成了三维标注信息本体模型的构建。初步解决了标注知识计算机描述的问题,为人工智能在三维标注领域的应用奠定了基础。 相似文献
7.
8.
为了便于准确地表达车间生产管理系统的信息,以及系统与制造企业的其它信息系统集成,本体概念引入到系统中。首先,构建了基于本体的知识集成框架,用于从全局的视角考虑本体开发过程;其次,阐明车间在生产过程中所涉及到的车间领域,论述本体多个层次之间的关系和结构;然后,给出了以车间业务流程为中心的车间本体的元模型,建立了车间本体的体系结构,使得车间本体的建立更加便利和快速;最后,通过应用实例说明本体的建立及表达过程。结果表明,该方法能快速地实现车间本体知识的建立与表达,解决了车间管理系统的信息共享、重用和集成问题。 相似文献
9.
为解决船舶焊接工艺知识缺乏有效管理及可重用性不足等问题,提出了一种基于本体的船舶焊接工艺知识图谱构建方法。首先,基于船舶焊接工艺内容凝练船舶焊接工艺知识,建立焊接工艺知识本体,并基于三阶张量三元组方法提取实体及概念间语义关系;其次,根据所获取的实体及其语义关系构建焊接工艺知识图谱,并建立本体与知识图谱的映射机制;最后,为避免概念共同属性的重复存储,采用考虑层级的表结构模型完成焊接工艺知识的存储。在此基础上,设计和开发了船舶焊接工艺知识管理系统,实现了知识图谱对焊接工艺知识的表达和语义检索,验证了船舶焊接工艺知识图谱构建方法的合理性。 相似文献
10.
11.
Disassembly Scheduling with Capacity Constraints 总被引:1,自引:0,他引:1
Disassembly scheduling is the problem of determining the ordering and disassembly schedule for used products while satisfying the demands of their individual parts or components over the planning horizon. The objective is to minimize the sum of purchase, inventory holding, and disassembly operation costs, subject to capacity restrictions in each period. In this paper, an integer programming model, which is a reversed form of the multi-level capacitated lot sizing problem, is suggested to represent and solve the problem optimally. A case study on used inkjet printers is worked out and the test results are reported. 相似文献
12.
13.
14.
Selective Disassembly Sequencing: A Methodology for the Disassembly of End-of-Life Products 总被引:1,自引:0,他引:1
Disassembly planning has become an important strategic issue in order to reduce the environmental impact and increase the value of end-of-life (EOL) products. However, in order to make the recovery of EOL products viable, optimal disassembly sequencing has to be determined for each reusable component. In this paper, a selective disassembly methodology for EOL products is presented, which was developed by reversing and modifying the methodology developed by Nevins and Whitney (1989) for assembly. In the new methodology, the disassembly sequence generation and selective part recovery are largely performed by a special computer software. A number of product case studies were used to prove the concept and demonstrate the efficiency of the methodology. 相似文献
15.
Disassembly is a critical step to increase the value of end-of-life (EOL) products and to reduce the environmental footprint. Despite worldwide efforts, disassembly is still performed manually due to the uncertainty associated with the quality and the quantity of the returned EOL products. In this paper, a cognitive robotics based system is proposed to address this problem. The system is equipped with four cognitive functions: reasoning, execution monitoring, learning and revision. The proposed system is tested using LCD screens. The results show that the system is flexible enough to deal with any product models without prior information. 相似文献
16.
为了解决集成环境下的复杂零件的工艺决策问题,从问题描述、规则定义和过程控制三个方面出发,提出了以"对象-规则-过程"为核心的知识工程应用方法.分析了包括产品特征信息、工艺过程信息、资源能力信息和加工方法知识信息在内的工艺决策对象信息,提出基于本体和元模型的建模框架.研究了基于规则引擎的工艺决策规则的表达和应用的方法.在分析工艺决策的过程化特点的基础上,结合工作流思想,提出工艺决策的过程化组织模式.开发了工艺设计原型系统,支持工艺决策方法的实施及应用. 相似文献