基于线性时变扰动模型的间歇过程最优迭代学习控制

A batch-to-batch optimal iterative learning control (ILC) strategy for the tracking control of product quality in batch processes is presented. The linear time-varying perturbation (LTVP) model is built for product quality around the nominal trajectories. To address problems of model-plant mismatches, model prediction errors in the previous batch run are added to the model predictions for the current batch run. Then tracking error transition models can be built, and the ILC law with direct error feedback is explicitly obtained. A rigorous theorem is proposed, to prove the convergence of tracking error under ILC. The proposed methodology is illustrated on a typical batch reactor and the results show that the performance of trajectory tracking is gradually improved by the ILC.     

An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes

Based on an equivalent two-dimensional Fornasini-Marchsini model for a batch process in industry, a closed-loop robust iterative learning fault-tolerant guaranteed cost control scheme is proposed for batch processes with actuator failures. This paper introduces relevant concepts of the fault-tolerant guaranteed cost control and formulates the robust iterative learning reliable guaranteed cost controller （ILRGCC）. A significant advantage is that the proposed ILRGCC design method can be used for on-line optimization against batch-to-batch process uncertainties to realize robust tracking of set-point trajectory in time and batch-to-batch sequences. For the convenience of implementation, only measured output errors of current and previous cycles are used to design a synthetic controller for iterative learning control, consisting of dynamic output feedback plus feed-forward control. The proposed controller can not only guarantee the closed-loop convergency along time and cycle sequences but also satisfy the H∞ performance level and a cost function with upper bounds for all admissible uncertainties and any actuator failures. Sufficient conditions for the controller solution are derived in terms of linear matrix inequalities （LMIs）, and design procedures, which formulate a convex optimization problem with LMI constraints, are presented. An example of injection molding is given to illustrate the effectiveness and advantages of the ILRGCC design approach.     

一种基于状态估计的间歇过程模型实时更新预测控制策略简

Nonlinear model predictive control （NMPC） is an appealing control technique for improving the per- formance of batch processes, but its implementation in industry is not always possible due to its heavy on-line computation. To facilitate the implementation of NMPC in batch processes, we propose a real-time updated model predictive control method based on state estimation. The method includes two strategies： a multiple model building strategy and a real-time model updated strategy. The multiple model building strategy is to produce a series of sim- plified models to reduce the on-line computational complexity of NMPC. The real-time model updated strategy is to update the simplified models to keep the accuracy of the models describing dynamic process behavior. The method is validated with a typical batch reactor. Simulation studies show that the new method is efficient and robust with respect to model mismatch and changes in process parameters.     

基于改进DOB的矿物研磨过程最优运行先进反馈控制(英文)

Advanced feedback control for optimal operation of mineral grinding process is usually based on the model predictive control (MPC) dynamic optimization. Since the MPC does not handle disturbances directly by controller design, it cannot achieve satisfactory effects in controlling complex grinding processes in the presence of strong disturbances and large uncertainties. In this paper, an improved disturbance observer (DOB) based MPC advanced feedback control is proposed to control the multivariable grinding operation. The improved DOB is based on the optimal achievable H 2 performance and can deal with disturbance observation for the nonminimum-phase delay systems. In this DOB-MPC advanced feedback control, the higher-level optimizer computes the optimal operation points by maximize the profit function and passes them to the MPC level. The MPC acts as a presetting controller and is employed to generate proper pre-setpoint for the lower-level basic feedback control system. The DOB acts as a compensator and improves the operation performance by dynamically compensating the setpoints for the basic control system according to the observed various disturbances and plant uncertainties. Several simulations are performed to demonstrate the proposed control method for grinding process operation.     

高纯度精馏过程的集成控制与在线优化策略

For high-purity distillation processes, it is difficult to achieve a good direct product quality control using traditional pro-portional-integral-differential (PID) control or multivariable predictive control technique due to some difficulties, such as long re-sponse time, many un-measurable disturbances, and the reliability and precision issues of product quality soft-sensors. In this paper, based on the first principle analysis and dynamic simulation of a distillation process, a new predictive control scheme is proposed by using the split ratio of distillate flow rate to that of bottoms as an essential controlled variable. Correspondingly, a new strategy with integrated control and on-line optimization is developed, which consists of model predictive control of the split ratio, surrogate model based on radial basis function neural network for optimization, and modified differential evolution optimization algorithm. With the strategy, the process achieves its steady state quickly, so more profit can be obtained. The proposed strategy has been successfully applied to a gas separation plant for more than three years, which shows that the strategy is feasible and effective.     

非高斯建模方法的间歇过程的在线预测监控和预测模型

A new on-line predictive monitoring and prediction model for periodic biological processes is proposed using the multiway non-Gaussian modeling. The basic idea of this approach is to use multiway non-Gaussian modeling to extract some dominant key components from daily normal operation data in a periodic process, and subsequently combining these components with predictive statistical process monitoring techniques. The proposed predictive monitoring method has been applied to fault detection and diagnosis in the biological wastewater-treatment process, which is based on strong diurnal characteristics. The results show the power and advantages of the proposed predictive monitoring of a continuous process using the multiway predictive monitoring concept, which is thus able to give very useful conceptual results for a daily monitoring process and also enables a more rapid detection of the process fault than other traditional monitoring methods.     

Robustness of reinforced gradient-type iterative learning control for batch processes with Gaussian noise☆

In this paper, a reinforced gradient-type iterative learning control profile is proposed by making use of system matrices and a proper learning step to improve the tracking performance of batch processes disturbed by exter-nal Gaussian white noise. The robustness is analyzed and the range of the step is specified by means of statistical technique and matrix theory. Compared with the conventional one, the proposed algorithm is more efficient to resist external noise. Numerical simulations of an injection molding process il ustrate that the proposed scheme is feasible and effective.     

间歇生产过程鲁棒统计监控及其应用

In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to latent structure (MPLS) were proposed for on-line batch process monitoring. However, they are based on the decomposition of relative covariance matrix and strongly affected by outlying observations. In this paper, in view of an efficient projection pursuit algorithm, a robust statistical batch process monitoring (RSBPM) framework, which is resistant to outliers, is proposed to reduce the high demand for modeling data. The construction of robust normal operating condition model and robust control limits are discussed in detail. It is evaluated on monitoring an industrial streptomycin fermentation process and compared with the conventional MPCA. The results show that the RSBPM framework is resistant to possible outliers and the robustness is confirmed.     

A Robust Statistical Batch Process Monitoring Framework and Its Application

In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to latent structure (MPLS) were proposed for on-line batch process monitoring. However, they are based on the decomposition of relative covariance matrix and strongly affected by outlying observations. In this paper, in view of an efficient projection pursuit algorithm, a robust statistical batch process monitoring (RSBPM) framework, which is resistant to outliers, is proposed to reduce the high demand for modeling data. The construction of robust normal operating condition model and robust control limits are discussed in detail. It is evaluated on monitoring an industrial streptomycin fermentation process and compared with the conventional MPCA. The results show that the RSBPM framework is resistant to possible outliers and the robustness is confirmed.     

改进的模糊预测控制算法及其在CSTR过程中的应用

A finite horizon predictive control algorithm,which applies a saturated feedback control law as its local control law,is presented for nonlinear systems with time-delay subject to input constraints.In the algorithm,N free control moves,a saturated local control law and the terminal weighting matrices are solved by a minimization problem based on linear matrix inequality(LMI) constraints online.Compared with the algorithm with a nonsaturated local law,the presented algorithm improves the performances of the closed-loop systems such as feasibility and optimality.This model predictive control(MPC) algorithm is applied to an industrial continuous stirred tank reactor(CSTR) with explicit input constraint.The simulation results demonstrate that the presented algorithm is effective.     

Iterative learning model predictive control for constrained multivariable control of batch processes

In this paper, we propose a model predictive control (MPC) technique combined with iterative learning control (ILC), called the iterative learning model predictive control (ILMPC), for constrained multivariable control of batch processes. Although the general ILC makes the outputs converge to reference trajectories under model uncertainty, it uses open-loop control within a batch; thus, it cannot reject real-time disturbances. The MPC algorithm shows identical performance for all batches, and it highly depends on model quality because it does not use previous batch information. We integrate the advantages of the two algorithms. The proposed ILMPC formulation is based on general MPC and incorporates an iterative learning function into MPC. Thus, it is easy to handle various issues for which the general MPC is suitable, such as constraints, time-varying systems, disturbances, and stochastic characteristics. Simulation examples are provided to show the effectiveness of the proposed ILMPC.     

Repetitive model predictive control of a reverse flow reactor

This paper deals with the control of a catalytic reverse flow reactor (RFR) used for methane combustion. The periodic flow reversals effected on the system makes it both continuous and discrete in nature (i.e., a hybrid system). Control of this system is challenging due to the unsteady state behavior of the process along with its mixed discrete and continuous behavior. Although model predictive control (MPC) is proven to be a powerful technique for several processes it becomes less effective in systems such as the RFR where the model prediction errors and the effect of disturbances on the plant output repeat from time to time. In such cases, control can be improved if the repetitive error pattern is exploited. A novel repetitive model predictive control (RMPC) strategy, that combines the basic concepts of iterative learning control (ILC) and repetitive control (RC) along with the concepts of MPC, is proposed for such systems. In the proposed strategy, the state variables of the model are reset periodically along with predictive control action such that the process follows the reference trajectory as closely as possible. The results obtained prove that the RMPC approach provides an excellent performance for the control of the RFR.     

Design and Analysis of Integrated Predictive Iterative Learning Control for Batch Process Based on Two-dimensional System Theory

Based on the two-dimensional (2D) systemtheory, an integrated predictive iterative learning control (2D-IPILC) strategy for batch processes is presented. First, the output response and the error transition model predictions along the batch index can be calculated analytically due to the 2D Roesser model of the batch process. Then, an integrated framework of combining iterative learning control (ILC) andmodel predictive control(MPC) is formed reasonably. The output of feedforward ILC is estimated on the basis of the predefined process 2D model. By minimizing a quadratic objective function, the feedback MPC is introduced to obtain better control performance for tracking problem of batch processes. Simulations on a typical batch reactor demonstrate that the satisfactory tracking performance as well as faster convergence speed can be achieved than traditional proportion type (Ptype) ILC despite the model error and disturbances.     

基于MPLS的间歇过程终点质量迭代优化控制

提出了多向偏最小二乘(MPLS)模型和迭代学习控制相结合的方法,实现间歇过程终点时刻产品质量指标的控制.利用间歇过程的重复特性,根据前一批次的终点质量偏差调整下-批次控制变量的轨迹,从而使质量指标逐步接近于理想指标.本文提出的方法可以有效地消除由于模型误差和未知扰动引起的质量偏差.在苯乙烯间歇聚合反应模型上进行了仿真分析,验证了该方法的有效性.     

A novel two-dimensional PID controller design using two-dimensional model predictive iterative learning control optimization for batch processes

It is known that the key indicators of batch processes are controlled by conventional proportional–integral–derivative (PID) strategies from the view of one-dimensional (1D) framework. Under such conditions, the information among batches cannot be used sufficiently; meanwhile, the repetitive disturbances also cannot be handled well. In order to deal with such situations, a novel two-dimensional PID controller optimized by two-dimensional model predictive iterative learning control (2D-PID-MPILC) is proposed. The contributions of this paper can be summarized as follows. First, a novel two-dimensional PID (2D-PID) controller is developed by combining the advantages of a PID-type iterative learning control (PIDILC) strategy and the conventional PID method. This novel 2D-PID controller overcomes the aforementioned disadvantages and extends the conventional PID algorithm from one-dimension to two-dimensions. Second, the tuning guidelines of the presented 2D-PID controller are obtained from the two-dimensional model predictive control iterative control (2D-MPILC) method. Thus, the proposed approach inherits the advantages of both PID control, PIDILC strategy, and 2D-MPILC scheme. The superiority of the proposed method is verified by the case study on the injection modelling process.     

High-order iterative learning model predictive control for batch chemical processes

In order to address two-dimensional (2D) control issue for a class of batch chemical processes, we propose a novel high-order iterative learning model predictive control (HILMPC) method in this paper. A set of local state-space models are first constructed to represent the batch chemical processes by adopting the just-in-time learning (JITL) technique. Meanwhile, a pre-clustered strategy is used to lessen the computational burden of the modelling process and improve the modelling efficiency. Then, a two-stage 2D controller is designed to achieve integrated control by combining high-order iterative learning control (HILC) on the batch domain with model predictive control (MPC) on the time domain. The resulting HILMPC controller can not only guarantee the convergence of the system on the batch domain, but also guarantee the closed-loop stability of the system on the time domain. The convergence of the HILMPC method is ensured by rigorous analysis. Two examples are presented in the end to demonstrate that the developed method provides better control performance than its previous counterpart.     

基于T-S模糊模型的间歇过程的迭代学习容错控制

间歇过程不仅具有强非线性,同时还会受到诸如执行器等故障影响,研究非线性间歇过程在具有故障的情况下依然稳定运行至关重要。针对执行器增益故障及系统所具有的强非线性,提出一种新的基于间歇过程的T-S模糊模型的复合迭代学习容错控制方法。首先根据间歇过程的非线性模型,利用扇区非线性方法建立其T-S模糊故障模型,再利用间歇过程的二维特性与重复特性,在2D系统理论框架内,设计2D复合ILC容错控制器,进而构建此T-S模糊模型的等价二维Rosser模型,接着利用Lyapunov方法给出系统稳定充分条件并求解控制器增益。针对强非线性的连续搅拌釜进行仿真,结果表明所提出方法具有可行性与有效性。     

Iterative learning reliable control of batch processes with sensor faults

An iterative learning reliable control (ILRC) scheme is developed in this paper for batch processes with unknown disturbances and sensor faults. The batch process is transformed into and treated as a two-dimensional Fornasini-Marchesini (2D-FM) model. Under the proposed control law, the closed-loop system with unknown disturbances and sensor faults not only converges along both the time and the cycle directions, but also satisfies certain H_∞ performance. For performance comparison, a traditional reliable control (TRC) law based on dynamic output feedback is also developed by considering the batch process in each cycle as a continuous process. Conditions for the existence of ILRC scheme are given as biaffine and linear matrix inequalities. Algorithms are given to solve these matrix inequalities and to optimize performance indices. Applications to injection packing pressure control show that the proposed scheme can achieve the design objectives well, with performance improvement along both time and cycle directions, and also has good robustness to uncertain initialization and measurement disturbances.     

Iterative learning controller synthesis using FIR models for batch processes

Adaptive iterative learning control based on the measured input-output data is proposed to solve the traditional iterative learning control problem in the batch process. It produces a control law with self-tuning capability by combining a batch-to-batch model estimation procedure with the control design technique. To build the unknown batch operation system, the finite impulse response (FIR) model with the lifted system is constructed for easy construction of a recursive least squares algorithm. It can identify the pattern of the current operation batch. The proposed model reference control method is applied to feedback control of the lifted system. It finds an appropriate control input so that the desired performance of the batch output can track the prescribed finite-time trajectory by iterative trials. Furthermore, on-line tracking control is developed to explore the possible adjustments of the future input trajectories within a batch. This can remove the disturbances in the current batch rather than the next batch trial and keep the product specifications consistent at the end of each batch. To validate the theoretical findings of the proposed strategies, two simulation problems are investigated.     

时变间歇过程的2D-PID自适应控制方法

针对间歇过程存在的参数时变问题,提出一种基于二维PID(2D-PID)迭代学习框架的自适应控制方法。首先,通过粒子群优化算法快速获取初始的2D-PID控制参数。在批次内,采用自调整神经元PID控制器对其进行在线自适应调节。进一步,考虑批次间的重复特性,通过PID型迭代学习控制,以利用历史批次的信息来修正当前批次的调节变量,最终提高控制性能。通过间歇发酵过程的仿真和比较研究,验证了所提出方法的有效性。