Temperature,pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for controlled release

Temperature, pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for drug delivery and release are designed. The well‐defined tetrablock copolymer poly(polyethylene glycol methacrylate)–poly[2‐(dimethylamino) ethyl methacrylate]–poly(N‐isopropylacrylamide)–poly(methylacrylic acid) (PPEGMA‐PDMAEMA‐PNIPAM‐PMAA) is synthesized via atom transfer radical polymerization, click chemistry, and esterolysis reaction. The tetrablock copolymer self‐assembles into noncrosslinked micelles in acidic aqueous solution. The core‐crosslinked micelles, shell‐crosslinked micelles, and shell–core dilayer‐crosslinked micelles are prepared via quaternization reaction or carbodiimide chemistry reaction. The crosslinked micelles are used as drug carriers to load doxorubicin (DOX), and the drug encapsulation efficiency with 20% feed ratio reached 59.2%, 73.1%, and 86.1%, respectively. The cumulative release rate of DOX is accelerated by single or combined stimulations. The MTT (3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay verifies that the inner‐layer crosslinked micelles show excellent cytocompatibility, and DOX‐loaded micelles exhibit significantly higher inhibition for HepG2 cell proliferation. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46714.     

pH-responsive micelles based on (PCL)2(PDEA-b-PPEGMA)2 miktoarm polymer: controlled synthesis,characterization, and application as anticancer drug carrier

Amphiphilic A₂(BC)₂ miktoarm star polymers [poly(ϵ-caprolactone)]₂-[poly(2-(diethylamino)ethyl methacrylate)-b- poly(poly(ethylene glycol) methyl ether methacrylate)]₂ [(PCL)₂(PDEA-b-PPEGMA)₂] were developed by a combination of ring opening polymerization (ROP) and continuous activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). The critical micelle concentration (CMC) values were extremely low (0.0024 to 0.0043 mg/mL), depending on the architecture of the polymers. The self-assembled empty and doxorubicin (DOX)-loaded micelles were spherical in morphologies, and the average sizes were about 63 and 110 nm. The release of DOX at pH 5.0 was much faster than that at pH 6.5 and pH 7.4. Moreover, DOX-loaded micelles could effectively inhibit the growth of cancer cells HepG2 with IC₅₀ of 2.0 μg/mL. Intracellular uptake demonstrated that DOX was delivered into the cells effectively after the cells were incubated with DOX-loaded micelles. Therefore, the pH-sensitive (PCL)₂(PDEA-b-PPEGMA)₂ micelles could be a prospective candidate as anticancer drug carrier for hydrophobic drugs with sustained release behavior.     

Synthesis and characterization of PEG–PCL–PEG triblock copolymers as carriers of doxorubicin for the treatment of breast cancer

Triblock copolymers of monomethoxy poly(ethylene glycol) (mPEG) and ε‐caprolactone (CL) were prepared with varying lengths of poly(ε‐caprolactone) (PCL) compositions and a fixed length of mPEG segment. The molecular characteristics of triblock copolymers were characterized by ¹H NMR, gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), and differential scanning calorimetry (DSC). These amphiphilic linear copolymers based on PCL hydrophobic chain and hydrophilic mPEG ending, which can self‐assemble into nanoscopic micelles with their hydrophobic cores, encapsulated doxorubicin (DOX) in an aqueous solution. The particle size of prepared micelles was around 40–92 nm. The DOX loading content and DOX loading efficiency were from 3.7–7.4% to 26–49%, respectively. DOX‐released profile was pH‐dependent and faster at pH 5.4 than pH 7.4. Additionally, the cytotoxicity of DOX‐loaded micelles was found to be similar with free DOX in drug‐resistant cells (MCF‐7/adr). The great amounts of DOX and fast uptake accumulated into the MCF‐7/adr cells from DOX‐loaded micelles suggest a potential application in cancer chemotherapy. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

In vitro degradability and stability of hydrophobically modified pH‐sensitive micelles using MPEG‐grafted poly(β‐amino ester) for efficient encapsulation of paclitaxel

Methoxypoly(ethylene glycol)‐grafted poly(β‐amino ester) was synthesized for the fabrication of pH‐sensitive micelles, and these micelles were modified with deoxycholic acid to facilitate the hydrophobic interaction between the micellar core and paclitaxel. The micelle properties were studied by dynamic light scattering and fluorescence spectrometry. An in vitro degradation study showed that the synthesized polymers degraded hydrolytically within 24 h under physiological conditions. The stability of paclitaxel‐loaded pH‐sensitive micelles was evaluated in vitro. The introduced deoxycholic acid more stabilized the micelles at pH 7.4 compared to the micelles without modification. But the pH‐sensitive region of the micelles was lowered from pH 6.8 to pH 5.8. These results indicate that pH‐sensitive micelles with improved stability have great potential as hydrophobic drug carriers for tumor targeting. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Highly efficient adsorbent for organic dyes based on a temperature‐ and pH‐responsive multiblock polymer

The self‐assembly behavior of amphiphilic block copolymers in selective solutions has many applications in environmentally responsive polymer materials. In this article, we report on a new amphiphilic, temperature and pH dual‐responsive poly[2‐dimethylaminoethyl methacrylate‐co‐(methyl methacrylate)]‐b‐poly[poly(ethylene glycol) methacrylate] [P(DMAEMA‐co‐MMA)‐b‐PPEGMA], which was synthesized via reversible addition–fragmentation chain‐transfer polymerization. The structure, self‐assembly behaviors, and process of organic dye adsorption were characterized by ¹H‐NMR, ultraviolet–visible absorbance spectroscopy, and DLS measurements. P(DMAEMA‐co‐MMA)‐b‐PPEGMA was proven to be an outstanding adsorbent with excellent reversibility. Methyl red was released from the micelles as the pH value of the solution was adjusted to 4, and it could also be encapsulated again when the pH value was adjusted to 7.4 because of the sensitive pH‐responsive ability. It is promising that the triblock polymer had a positive effect on dye adsorption for environmental protection. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46626.     

Core/shell pH‐sensitive micelles self‐assembled from cholesterol conjugated oligopeptides for anticancer drug delivery

A doxorubicin (DOX) delivery system of pH‐sensitive micelles self‐assembled from cholesterol conjugated His₅Arg₁₀ (HR15‐Chol) and His₁₀Arg₁₀ (HR20‐Chol) has been described in this article. The amphiphilic molecules have low critical micelle concentrations of 17.8 and 28.2 μg/mL for HR15‐Chol and HR20‐Chol, respectively, even at a low pH of 5.0. The pH‐sensitive histidine segment of the polypeptide block is insoluble at pH 7.4 but becomes positively charged and soluble via protonation at pH lower than 6.0. The size and zeta potential of DOX‐loaded micelles increases with the decrease in pH. Coarse‐grained simulations were performed to verify the structure of DOX‐loaded micelles and pH sensitivity of HR15/20‐Chol. The in vitro DOX release from the micelles is significantly accelerated by decreasing pH from 7.4 to 5.0. Furthermore, DOX release from the micelles is controlled by a Fickian diffusion mechanism. These micelles have great potential applications in delivering hydrophobic anticancer drugs for improved cancer therapy. © 2009 American Institute of Chemical Engineers AIChE J, 2010     

Preparation of new dendrimer‐like star‐shaped amphiphilic poly(ethylene glycol)–poly(ϵ‐caprolactone) copolymers for biocompatible and high‐efficiency curcumin delivery

Novel amphiphilic star‐shaped terpolymers comprised of hydrophobic poly(?‐caprolactone), pH‐sensitive polyaminoester block and hydrophilic poly(ethylene glycol) (M_n = 1100, 2000 g mol^?1) were synthesized using symmetric pentaerythritol as the core initiator for ring‐opening polymerization (ROP) reaction of ?‐caprolactone functionalized with amino ester dendrimer structure at all chain ends. Subsequently, a second ROP reaction was performed by means of four‐arm star‐shaped poly(?‐caprolactone) macromer with eight ‐OH end groups as the macro‐initiator followed by the attachment of a poly(ethylene glycol) block at the end of each chain via a macromolecular coupling reaction. The molecular structures were verified using Fourier transform infrared and ¹H NMR spectroscopies and gel permeation chromatography. The terpolymers easily formed core–shell structural nanoparticles as micelles in aqueous solution which enhanced drug solubility. The hydrodynamic diameter of these agglomerates was found to be 91–104 nm, as measured using dynamic light scattering. The hydrophobic anticancer drug curcumin was loaded effectively into the polymeric micelles. The drug‐loaded nanoparticles were characterized for drug loading content, encapsulation efficiency, drug–polymer interaction and in vitro drug release profiles. Drug release studies showed an initial burst followed by a sustained release of the entrapped drug over a period of 7days at pH = 7.4 and 5.5. The release behaviours from the obtained drug‐loaded nanoparticles indicated that the rate of drug release could be effectively controlled by pH value. Altogether, these results demonstrate that the designed nanoparticles have great potential as hydrophobic drug delivery carriers for cancer therapy. © 2015 Society of Chemical Industry     

A novel thermosensitive triblock copolymer from 100% renewably sourced poly(trimethylene ether) glycol

Bio‐based amphiphilic triblock copolymers with 100% renewably sourced poly(trimethylene ether) glycol (PO3G) as the hydrophobic blocks and statistical copolymer of 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and oligo(ethylene glycol)methacrylate (OEGMA) [P(MEO₂MA‐stat‐OEGMA)] as the hydrophilic blocks are synthesized and characterized. It is found that the molar ratio of MEO₂MA/OEGMA among the resulting copolymers is approximately 70/30. The degree of polymerization (DP) of P(MEO₂MA‐stat‐OEGMA) block ranges from 16 to 90, and the DP of PO3G block is fixed at 35. The amphiphilic copolymers could form core‐shell micelles self‐assembly in aqueous solution at low concentrations, and the micelles are in spherical shape with sizes varying from 121 to 188 nm. With the increasing length of hydrophilic blocks, the critical micelle concentration increases from 2.15 to 13.8 mg L^?1, and the lower critical solution temperature improves from 32.5 to 38.4 °C. The in vitro doxorubicin (DOX) release study shows that all DOX‐loaded micelles have a higher release rate at 37 °C than that at 25 °C. Cytotoxicity test reveals that the blank micelles are nearly nontoxic. These results indicate that the block copolymer micelles containing 100% renewably sourced PO3G can serve as a potential drug delivery carrier. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46112.     

Synthesis and micellar characterization of luteinizing hormone‐releasing hormone poly(ethylene glycol)‐block‐poly(l‐histidine) copolymers

A facile and well‐controlled pathway was introduced to obtain optimal pH‐sensitive luteinizing hormone‐releasing hormone—functionalized poly(ethylene glycol)‐block‐poly(l ‐histidine) (LHRH‐PEG‐PHIS) micelles in this paper. The influence of block‐selective solvent, the weight ratio of the selective solvent to common solvent and initial polymer concentration on the self‐assembly of LHRH‐PEG‐PHIS micelles were studied. These factors exerted remarkable influence on the morphology of the resulting micelles. The micelles showed a spherical geometry and an uniform appearance under the following optimal experimental conditions: LHRH‐PEG/PHIS ratio of 1.0 by molar, DMF as the selective solvent and 3.0 mg/mL as initial concentration, 100 W of ultrasonic power. These micelles had a small diameter (about 90 nm), low CMC (10 μg/mL), and pH‐sensitive switch in surface charge and micelles' size. As the pH of the micellar solution decreased from pH 7.4 to 5.5, the zeta potential of the LHRH‐PEG‐PHIS micelles increased from ?0.02 mV to 20.7 mV and the diameter of the nanoparticles decreased from 137 nm to 76 nm. After 30 h of incubation at pH 5.0, 6.0, and 7.4 the released free Doxorubicin (DOX) was about 83.18%, 81.26%, and 30.35%, respectively. The LHRH‐PEG‐PHIS micelles could combine the characteristics of active targeting with pH‐triggered drug release promising as intracellular drug delivery carriers. POLYM. ENG. SCI., 55:277–286, 2015. © 2014 Society of Plastics Engineers     

Synthesis of double‐hydrophilic poly(methylacrylic acid)–poly(ethylene glycol)–poly(methylacrylic acid) triblock copolymers and their micelle formation

The aim of the work reported was to synthesize a series of double‐hydrophilic poly(methacrylic acid)‐block‐poly(ethylene glycol)‐block‐poly(methacrylic acid) (PMAA‐b‐PEG‐b‐PMAA) triblock copolymers and to study their self‐assembly behavior. These copolymeric self‐assembly systems are expected to be potential candidates for applications as carriers of hydrophilic drugs. Bromo‐terminated difunctional PEG macroinitiators were used to synthesize well‐defined triblock copolymers of poly(tert‐butyl methacrylate)‐block‐poly(ethylene glycol)‐block‐poly(tert‐butyl methacrylate) via reversible‐deactivation radical polymerization. After the removal of the tert‐butyl group by hydrolysis, double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers were obtained. pH‐sensitive spherical micelles with a core–corona structure were fabricated by self‐assembly of the double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers at lower solution pH. Transmission electron microscopy and laser light scattering studies showed the micelles were of nanometric scale with narrow size distribution. Solution pH and micelle concentration strongly influenced the hydrodynamic radius of the spherical micelles (48–310 nm). A possible reason for the formation of the micelles is proposed. Copyright © 2010 Society of Chemical Industry     

Preparation and application in drug controlled delivery of pH‐sensitive P(CE‐co‐DMAEMA‐co‐MEG) hydrogel

A pH‐sensitive hydrogel [P(CE‐co‐DMAEMA‐co‐MEG)] was synthesized by the free‐radical crosslinking polymerization of N,N‐dimethylaminoethyl methacrylate (DMAEMA), poly(ethylene glycol) methyl ether methacrylate(MPEG‐Mac) and methoxyl poly(ethylene glycol)‐poly(caprolactone)‐methacryloyl methchloride (PCE‐Mac). The effects of pH and monomer content on swelling property, swelling and deswelling kinetics of the hydrogels were examined and hydrogel microstructures were investigated by SEM. Sodium salicylate was chosen as a model drug and the controlled‐release properties of hydrogels were pilot studied. The results indicated that the swelling ratios of the gels in stimulated gastric fluids (SGF, pH = 1.4) were higher than those in stimulated intestinal fluids (SIF, pH = 7.4), and followed a non‐Fickian and a Fickian diffusion mechanism, respectively. In vitro release studies showed that its release rate depends on different swelling of the network as a function of the environmental pH and DMAEMA content. SEM micrographs showed homogenous pore structure of the hydrogel with open pores at pH 1.4. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40737.     

An in vitro focus on doxorubicin hydrochloride delivery of novel pH‐responsive poly(2‐succinyloxyethylmethacrylate) and poly[(N‐4‐vinylbenzyl),N,N‐diethylamine] diblock copolymers

Novel pH‐responsive poly(2‐succinyloxyethylmethacrylate)‐b‐poly[(N‐4‐vinylbenzyl),N,N‐diethylamine] [poly(SEMA‐b‐VEA)] diblock copolymers were synthesized via reversible addition fragmentation transfer (RAFT) polymerization to investigate their self‐assembly micellar behavior. The self‐assembly behaviors of synthesized diblock copolymers with distinct molecular weights (labeled (1) to) were confirmed by ¹H NMR spectroscopy, TEM and dynamic light scattering measurements. Doxorubicin hydrochloride (DOX) loading capacity was evaluated, and the in vitro cytotoxicity effect of DOX‐loaded diblock copolymer was also studied by assessing the survival rate of the breast cancer cell line MCF‐7 with 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay. The results exhibited remarkable controlled release in the MTT assay. The DOX encapsulation efficiency was calculated to be 96.4%. The size and zeta potential of DOX‐loaded poly(SEMA‐b‐VEA) diblock copolymers were 204 nm and +5.7 mV at a pH of 7.4. DOX release values after 440 h at pH 7.4, 5.4 and 4 were 22.15%, 31.43% and 47.06%, respectively. The released values of DOX‐loaded poly(SEMA‐b‐VEA) and at pH 7.4 were 22.15%, 20.5% and 17.5%, respectively. Cell survival ratios were 18.9%, 23.16% and 16.92% after 72 h. Poly(SEMA‐b‐VEA) copolymers can be considered in nanomedicine applications due to their excellent pH‐responsive micellar behavior. © 2017 Society of Chemical Industry     

Intracellular pH‐sensitive dextran‐based micelles as efficient drug delivery platforms

As drug delivery systems, stimuli‐responsive polymer micelles hold great potential in cancer chemotherapeutics to improve therapeutic efficiency and eliminate organism adverse effects. Here, pH‐sensitive polymeric micelles based on dextran‐g‐benzimidazole were designed and used for intracellular anticancer drug delivery. The anticancer drug doxorubicin (DOX) was effectively loaded into the micelles via hydrophobic interactions. In vitro release studies demonstrated that the release of loaded DOX was greater and faster under acid conditions such as in carcinomatous areas (pH < 6.8) than in physiological conditions (pH 7.4). MTT assays and flow cytometric analyses showed that DOX‐loaded micelles had higher cellular proliferation inhibition towards HeLa and HepG2 cells than pH‐insensitive controls. These pH‐sensitive micelles with significant efficiency for intracellular drug release will be beneficial to the future of in vivo biomedical applications. © 2014 Society of Chemical Industry     

Encapsulation of curcumin by methoxy poly(ethylene glycol‐b‐aromatic anhydride) micelles

Suitable carrier systems for sustained release of curcumin were studied by using the self‐assembled polymeric micelles. Poly(ethylene glycol) methyl ether and poly(aromatic anhydride) were used as the hydrophilic and hydrophobic blocks, respectively, in forming amphiphilic diblock copolymers. Four different types of polymers methoxy poly(ethylene glycol‐ b‐1,3‐bis(p‐carboxyphenoxy)propane) (mPEG₅₀₀₀CPP, mPEG₂₀₀₀CPP), methoxy poly(ethylene glycol‐b‐1,6‐bis(p‐carboxyphenoxy)hexane) (mPEG₅₀₀₀CPH, mPEG₂₀₀₀CPH) were synthesized via melt condensation approach. Micelles were formed at very low polymer concentration with stable hydrophobic cores. The particle sizes of micelles remained stable during degradation period. All four different polymeric micelles showed low cytotoxicity toward human fibroblasts cells and can kill cancer cells in very low concentrations. High loading efficiency and drug content were observed in curcumin‐loaded micelles. Curcumin showed mild initial burst (30% of drug loading in the first 24 h) when released from the micelles and its release was sustained for at least 18 days. These micelles, especially those of mPEG₅₀₀₀CPP, show potential to serve as the delivery vehicles for sustained release of curcumin. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Preparation and aqueous solution behavior of a ph‐responsive branched copolymer based on 2‐(diethylamino)ethyl methacrylate

pH‐Responsive amphiphilic branched copolymers were prepared from poly(ethylene glycol) methyl ether methacrylate (PEGMA), 2‐(diethylamino)ethyl methacrylate (DEAEMA), 2‐(tert‐butylamino)ethyl methacrylate (tBAEMA), and ethylene glycol dimethacrylate (EGDMA) utilizing a thiol‐modified free radical polymerization. The molecular structures of copolymers were confirmed by proton nuclear magnetic resonance spectroscopy (¹H NMR) and triple‐detection gel permeation chromatography (tri‐GPC). The aqueous solution behaviors of the obtained copolymers were investigated by dynamic light scattering (DLS). The DLS data showed that about 16 nm polymer particles comprising of hydrophobic poly(tert‐butylamino)ethyl methacrylate (PtBAEMA) and poly(diethylaminoethyl methacrylate (PDEAEMA) core, hydrophilic PEGMA corona were formed above pH 8. With the decrease of pH from 8 to 6, a dramatic increase in the hydrodynamic radius of polymer particles from 16 nm to 130 nm was observed resulting from the protonation of the PDEAEMA segment. Moreover, in vitro drug release behaviors of the resulting polymer assemblies at different pH values were also investigated to evaluate their potential as sustained release drug carriers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42183.     

PEGylated polylysine derived copolymers with reduction‐responsive side chains for anticancer drug delivery

Reduction‐responsive drug delivery systems have recently gained intense attention in intracellular delivery of anticancer drugs. In this study, we developed a PEGylated polypeptide, poly(ethylene glycol)‐block‐poly(?‐propargyloxycarbonyl‐l ‐lysine) (PEG₁₁₃‐b‐PPAL), as a novel clickable substrate for conjugation of reduction‐responsive side chains for antineoplastic drug delivery. PEG₁₁₃‐b‐PPAL was synthesized through ring‐opening polymerization of alkyne‐containing N‐carboxyanhydride monomers. A designed disulfide‐containing side chain was introduced onto the PEGylated polypeptide by click reaction. The obtained copolymer PEG₁₁₃‐b‐P(Lys‐DSA) formed micelles by self‐assembly, which exhibited reduction‐responsive behavior under the stimulus of 10 mmol L^–1 glutathione (GSH) in water. A small molecule intermediate, compound 2 , was used as a model to investigate the thiol reduction mechanism of PEG₁₁₃‐b‐P(Lys‐DSA) copolymers. The anticancer drug doxorubicin (DOX) was then loaded into the micelles with a drug loading content of 6.73 wt% and a loading efficiency of 40.3%. Both the blank and the drug‐loaded micelles (DOX‐loaded polylysine derived polymeric micelles (LMs/DOX)) adopted a spherical morphology, with average diameters of 48.0 ± 13.1 and 63.8 ± 20.0 nm, respectively. The in vitro drug release results indicated that DOX could be released faster from the micelles by the trigger of GSH in phosphate buffered saline. Confocal laser scanning microscopy and flow cytometer analysis further proved the intracellular delivery of DOX by LMs/DOX and their GSH‐sensitive release behavior. A 3‐(4,5‐dimethyl‐thiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide assay showed that the polymers exhibited negligible cytotoxicity towards normal L929 cells or cancer MCF‐7 cells with a treated concentration up to 1.0 mg mL^–1. In conclusion, our synthesized biocompatible and biodegradable PEGylated polypeptides hold great promise for intracellular antineoplastic drug delivery. © 2019 Society of Chemical Industry     

Self‐assembled micelles prepared from poly(ɛ‐caprolactone)–poly(ethylene glycol) and poly(ɛ‐caprolactone/glycolide)–poly(ethylene glycol) block copolymers for sustained drug delivery

A series of poly(?‐caprolactone)–poly(ethylene glycol) (PCL‐PEG) and poly(?‐caprolactone/glycolide)–poly(ethylene glycol) [P(CL/GA)‐PEG] diblock copolymers were prepared by ring‐opening polymerization of ?‐caprolactone or a mixture of ?‐caprolactone and glycolide using monomethoxy PEG (mPEG) as macroinitiator and Sn(Oct)₂ as catalyst. The resulting copolymers were characterized using ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Copolymer micelles were prepared using the nanoprecipitation method. The morphology of the micelles was spherical or worm‐like as revealed by transmission electron microscopy, depending on the copolymer composition and the length of the hydrophobic block. Introduction of the glycolide component, even in small amounts (CL/GA = 10), disrupted the chain structure and led to the formation of spherical micelles. Interestingly, the micelle size decreased with the encapsulation of paclitaxel. Micelles prepared from mPEG5000‐derived copolymers exhibited better drug loading properties and slower drug release than those from mPEG2000‐derived copolymers. Drug release was faster for copolymers with shorter PCL blocks than for those with longer PCL chains. The introduction of glycolide moieties enhanced drug release, but the overall release rate did not exceed 10% in 30 days. In contrast, drug release was enhanced in acidic media. Therefore, these bioresorbable micelles and especially P(CL/GA)‐PEG micelles with excellent stability, high drug loading content, and prolonged drug release could be promising for applications as drug carriers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45732.     

Poly(methyl methacrylate)/poly(ethylene glycol)/poly(ethylene glycol dimethacrylate) micelles: Preparation,characterization, and application as doxorubicin carriers

A crosslinked amphiphilic copolymer [poly(ethylene glycol) (PEG)–poly(methyl methacrylate) (PMMA)–ethylene glycol dimethacrylate (EGDM)] composed of PMMA, PEG, and crosslinking units (EGDM) was synthesized by atom transfer radical polymerization to develop micelles as carriers for hydrophobic drugs. By adjusting the molar ratio of methyl methacrylate and EGDM, three block copolymer samples (P0, P1, and P2) were prepared. The measurement of gel permeation chromatography and ¹H‐NMR indicated the formation of crosslinked structures for P1 and P2. Fluorescence spectroscopy measurement indicated that PEG–PMMA–EGDM could self‐assemble to form micelles, and the critical micelle concentration values of the crosslinked polymer were lower than those of linear ones. The prepared PEG–PMMA–EGDM micelles were used to load doxorubicin (DOX). The drug‐loading efficiencies of P1 and P2 were higher than that of P0 because the crosslinking units enhanced the micelles' stability. With increasing drug‐loading contents, DOX release from the micelles in vitro was decreased, and in the crosslinked formulations, the release rate was also slower. An in vitro release study indicated that DOX release from the micelles for the linear samples was faster than that for crosslinked micelles. The drug feeding amount increased and resulted in an increase in the drug‐loading content, and the loading efficiency decreased. These PEG–PMMA–EGDM micelles did not show toxicity in vitro and could reduce the cytotoxicity of DOX in the micelles; this suggested that they are good candidates as stable drug carriers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39623.     

PEGylated hollow pH‐responsive polymeric nanocapsules for controlled drug delivery

Novel pH‐responsive PEGylated hollow nanocapsules (HNCaps) were fabricated through a combination of distillation–precipitation copolymerization and surface thiol–ene ‘click’ grafting reaction. For this purpose, SiO₂ nanoparticles were synthesized using the Stöber approach, and then modified using 3‐(trimethoxysilyl)propyl methacrylate (MPS). Afterward, a mixture of triethyleneglycol dimethacrylate (as crosslinker), acrylic acid (AA; as pH‐responsive monomer) and MPS‐modified SiO₂ nanoparticles (as sacrificial template) was copolymerized using the distillation–precipitation approach to afford SiO₂@PAA core–shell nanoparticles. The SiO₂ core was etched from SiO₂@PAA using HF solution, and the obtained PAA HNCaps were grafted with a thiol‐end‐capped poly(ethylene glycol) (PEG) through a thiol–ene ‘click’ reaction to produce PAA‐g‐PEG HNCaps. The fabricated HNCaps were loaded with doxorubicin hydrochloride (DOX) as a model anticancer drug, and their drug loading and encapsulation efficiencies as well as pH‐dependent drug release behavior were investigated. The anticancer activity of the drug‐loaded HNCaps was extensively evaluated using MTT assay against human breast cancer cells (MCF7). The cytotoxicity assay results as well as superior physicochemical and biological features of the fabricated HNCaps mean that the developed DOX‐loaded HNCaps have excellent potential for cancer chemotherapy. © 2020 Society of Chemical Industry     

PMMA‐based microgels for controlled release of an anticancer drug

Methyl methacrylate (MMA), methoxy poly(ethylene glycol) monomaleate (MPEG), and acrylamidoglycolic acid (AGA) terpolymeric microgels (MGs) have been synthesized by free‐radical surfactant‐free emulsion polymerization. MPEG was synthesized from maleic anhydride and methoxy poly(ethylene glycol). The MGs were crosslinked with ethylene glycol dimethacrylate, and the chemical crosslinking was confirmed by Fourier transform infrared spectroscopy. 5‐Fluorouracil (5‐FU), a model anticancer drug, has been loaded into the MGs by in situ and adsorption methods. Empty as well as drug‐loaded MGs were then characterized by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). DSC and XRD studies indicated a molecular level dispersion of the drug in PMMA MGs during in situ loading. TEM images showed the formation of spherical MGs. In vitro release of 5‐FU from the crosslinked poly(MMA‐co‐AGA‐co‐MPEG) MGs were investigated at both pH 7.4 and 1.2 buffer medium that controlled release of the drug up to ～ 18 h. Both the encapsulation efficiency and the release patterns were dependent on the amount of crosslinking agent and the amount of drug loaded. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009