不同螺旋角度螺旋折流板换热器传热性能与压降的研究

本文对螺旋折流板换热器和传统的弓形折流板换热器进行了壳程传热性能和压降特性的对比，同时通过实验方法对8°、12°、18°、25°、30°、40°螺旋角无搭接的螺旋折流板换热器进行了壳程传热性能和压降特性的研究，得出螺旋折流板换热器的螺旋流动强化了传热，螺旋折流板换热器的压降比弓形折流板换热器的压降小。     

螺旋折流板管壳式换热器壳程传热性能及压降的研究

本文对螺旋折流板换热器和传统的弓形折流板换热器进行了壳程传热性能和壳程的阻力的对比,同时通过实验方法对25°、40°螺旋角的螺旋折流板和弓形折流板换热器进行了壳程传热性能和壳程阻力的研究,得出螺旋折流板换热器的螺旋流动强化了传热,螺旋折流板换热器的壳程阻力比弓形折流板换热器的壳程阻力小。     

螺旋折流板换热器的研究与进展

本文介绍了螺旋折流板换热器的几何形状和流动原理,对其传热及压力降的研究现状进行了总结,与弓形折流板换热器相比,螺旋折流板换热器的最大优点降低阻力,增加传热系数。未来的研究重点是流动换热机理以及影响流动换热机理的因素。     

螺旋折流板换热器在发电厂应用的可行性

性能试验和数值模拟计算都表明,三分周向重叠螺旋折流板换热器是一种适合正三角形布管的自然分隔、可抑制逆向泄漏、零件较少、且其壳侧换热系数和单位压降的壳侧换热系数指标较高的结构型式。不仅可应用于发电厂的油冷却器、闭式冷却器等单相流体传热场合,而且可利用倾斜折流板的疏液和螺旋通道中离心力分离汽液作用来强化立式给水加热器的壳侧传热,为推广应用可以节省占地面积且维修方便的立式给水加热器开拓了新思路。     

不同螺旋角螺旋折流板换热器传热性能对比实验

对螺旋角为8°、12°、18°、30°、40°的螺旋折流板换热器进行了壳程传热性能和压力降测试,得到了相应结构下的总传热系数和压力降。然后通过对试验数据的整理分析,并进行曲线回归,得到了不同螺旋角的螺旋折流板换热器换热系数和压降经验计算公式。研究表明,实验条件下,30°螺旋角的螺旋折流板换热器的单位压降传热系数要优于8°、12°、18°、40°螺旋角的螺旋折流板换热器的传热系数。     

折弯弓形折流板换热器流动换热性能研究

为了提高折流板换热器的换热性能,改变了折流板换热器的折弯夹角和折流板间距,利用ANSYS Fluent对换热器壳程流体流动与换热过程进行模拟,分析了不同折流板折弯夹角α (110°,135°,170°和180°)、折流板间距（250,300和350 mm)和雷诺数（10 000,20 000和50 000）对换热器壳程压力、速度和温度的影响。结果表明：增大雷诺数对改善流动死区有很大的作用,雷诺数为50 000时的流动死区相对于雷诺数为10 000时面积减小较大;随着夹角α的减小,折流板背流侧的流动死区面积逐渐减小、换热器的表面传热系数和进出口压降力越大,夹角α为110°时出口温度最小、进出口压降最大,夹角α为135°时PEC最大且换热器综合性能最优;折流板间距增大,压力变化梯度减小,压差变化幅度减小,壳程出口温度变化不成正比关系,间距为300 mm时出口温度最低。     

三分螺旋折流板换热器壳侧传热特性试验

对倾斜角为20°、24°、28°、32°单头和32°双头周向重叠三分螺旋折流板换热器和作为对照的弓形折流板换热器的水-水传热和压降性能进行了测试;得到了总体传热系数K、壳侧换热系数ho、壳侧压降Δpo等参数和ho/Δpo综合性能指标随壳侧流量的变化曲线。试验结果表明倾斜角20°方案的性能指标均好于其他方案,且其壳侧换热系数和单位压降的壳侧换热系数综合性能指标比弓形折流板换热器方案平均分别高出25%和100%以上。     

不同折流板换热器的传热与流阻性能对比

以柴油(水)为工质,在流量范围为4m^3／h≤W0≤19m^3／h内,用两种不同壳体结构的折流板换热器进行对比试验。研究得到了两种换热器的壳侧传热膜系数和流动阻力随流量变化的关系曲线。研究结果表明：在该试验条件下,螺旋折流板换热器的壳侧传热膜系数比弓型折流板换热器高33％-136％,具有较好的强化传热效果,而壳侧流动阻力则比弓型折流板换热器低15％-35％。螺旋折流板换热器具有较好的传热与流阻特性,用于石油、化工等领域具有广阔的前景。     

螺旋折流板换热器的制造技术研究

螺旋折流板换热器是一种新型高效换热器,具有壳程流动阻力小,换热效率高,抑振和防垢性能好等优点,已经引起了越来越多研究者的关注.介绍了非连续螺旋折流板换热器和连续螺旋折流板换热器的制造技术,可以更好地促进螺旋折流板换热器的研究.     

特种材料螺旋折流板高效换热器的研究

介绍了钛、锆高效波纹管与螺旋折流板新型结构的高效换热器的研发情况,实践证明,与传统的管壳式换热器相比较,特种材料螺旋折流板高效换热器具有传热系数高、压降低、防振动及适用范围广的优点,且增产节能效果明显,同时节省原材料投资.     

Thermal-Hydraulic Characteristics of Helical Baffle Shell-and-Tube Heat Exchangers

Abstract

Shell-and-tube heat exchangers are frequently used in several industrial applications. A model was developed using engineering equations solver software to predict the performance of various baffle configurations of shell-and-tube heat exchangers. The model is based on the Bell-Delaware method for the segmental baffle, while mathematical correlations for the helical baffle are provided for design and analysis purpose. The accuracy of the present model is validated against the experimental data available in the literature. The results showed that helical baffles offer much higher performance compared to the segmental baffled heat exchanger. It was found that the performance of the helical baffle increases with increasing baffle angle until it reaches an optimum value; it then starts to decrease at an angle of 42°.     

Modeling for Shell-Side Heat Transfer Coefficient and Pressure Drop of Helical Baffle Heat Exchangers

This study has suitably modified the existing heat transfer and pressure drop correction factors of the modified Bell–Delaware method used for heat exchangers with segmental baffles, taking into consideration the helical baffle geometry. These correction factors are presented in parametric formulas based on the Taborek presented procedure for segmental baffles. These formulas are functions of the geometrical and physical parameters of discontinuous helical baffles. In addition, the parametric formulas are presented graphically based on the Stehlik method. The correction design method proposed by Stehlik for the helical baffle is presented in detail and a theoretical model for shell-side heat transfer and pressure drop is developed. In general, the results show that the present model matches more closely with the graphically proposed correction factors of Stehlik. In order to calculate the shell-side heat transfer coefficient and pressure drop using the present method, a computational code has been developed by the authors. In addition, in order to examine the validity, the results of the code for a case study are compared with the results obtained from EXPRESS software and experimental formulas presented by Zhang. The results of comparison show that the proposed method is accurate and can be used by designers confidently.     

Heat Transfer and Flow Resistance Characteristics of Helical Baffle Heat Exchangers with Twisted Oval Tube

To overcome the defect of the significant increase in pressure drop when the heat transfer performance of helical baffle heat exchanger is improved,a novel heli...     

管壳式换热器折流部件优化研究进展

为了提高管壳式换热器的能源利用率,换热器强化传热的研究得到广泛关注。本文从强化传热原理、结构改进和设计优化等三方面对换热器折流部件的优化改进研究进行了分析和总结。其中,强化传热原理主要包括不同折流板通过改变流场的特性影响换热器性能;结构改进包括分段挡板、折流孔板和螺旋挡板的优化进展以及与单弓挡板的对比研究;设计优化包括利用各种新型算法对换热器结构参数的优化和成本的控制。针对管壳式换热器折流部件的强化传热问题,提出了非连续螺旋挡板的研究和结合多目标优化设计的结构改进是未来的重点研究方向。     

连续螺旋折流板管壳式换热器动态特性研究及预测

建立了可进行壳管式换热器动态特性试验研究系统,通过试验研究的方法对水-油为换热工质的连续螺旋折流板管壳式换热器动态特性进行了试验研究,进口流量扰动为等百分比流量特性,研究了4种流量扰动方式下水和油出口温度的动态响应。同时研究了在一定Re数下,不同的流体扰动量对换热器进出口温升的影响,得到了换热器进出口温升与流体扰动量之间的关联式。实验表明,液液换热系统温度的动态响应时间比较长,研究发现在正负的流量扰动下,换热器进出口温度变化呈现线性变化,进出口温升在正负流量扰动下其变化曲线具有对称特征。分别建立了有限差分数值预测模型及人工神经网络模型对换热器油侧的出口温度进行了动态预测,预测结果与试验值符合良好,人工神经网络的预测结果要好于数值模拟预测,其偏差绝对值在1.3%以内,表明人工神经网络在进行复杂的系统辨识时具有一定的参考及应用价值。     

Experimental Performance Comparison of Shell-Side Heat Transfer for Shell-and-Tube Heat Exchangers with Different Helical Baffles

In this study, experiments were carried out to study the effects of baffle overlap proportion on the shell-side flow resistance and heat transfer performance of the shell-and-tube heat exchangers with helical baffles (STHXsHB). Three STHXsHB with an overlap proportion of 10% and helix angles of 20°, 30°, and 40° were tested. Comparisons were made of the experimental data of the STHXsHB with the same helix angles but 50% overlap proportion. The theory of entransy dissipation was employed to evaluate the irreversible loss in STHXsHB with different helix angles and overlap proportions. The results indicated that both the baffle overlap proportion and the helix angle have a great effect on the shell-side flow resistance and heat transfer. For a given helix angle, the comprehensive performance of STHXsHB with small overlap proportion is always better than that with large overlap proportion at the same mass flow rate or Reynolds number on the shell side. However, for the same heat transfer area, working conditions, and helix angle, the STHXsHB with large baffle overlap proportion has less irreversibility in the heat exchange process, according to the theory of entransy dissipation. In addition, experimental results demonstrated that the configuration of the relatively large helix angle and baffle overlap proportion is the preferred alternative in STHXsHB.     

Extruded Microchannel-Structured Heat Exchangers

Abstract

In the search for more compact air/liquid heat exchangers, one possibility is to increase the heat transfer coefficient and surface area by a decrease of the size of the fluid channels. A practical example could be seen in the air/water cross-flow heat exchangers used in cars. For such exchangers, minimization of the total volume leads to a very thin structure, with a lot of small and short air channels. We have designed and patented a cross-flow heat transfer surface with microchannels that has such a structure and can be manufactured industrially at a reasonable cost by extrusion either in aluminum or in polymers. The thermo-hydraulic performance of the structure has been simulated using standard correlations and CFD codes, and prototypic structures are under investigation to validate simulations. Compared to classical heat exchangers, our design is superior in flexibility and compactness for air/liquid applications.