Generalized measures of fault tolerance in n-cube networks

It is shown that for a given p (1<p⩽n ), the n-cube network can tolerate up to p2^(n-p)-1 processor failures and remains connected provided that at most p neighbors of any nonfaulty processor are allowed to fail. This generalizes the result for p=n-1, obtained by A.-M Esfahanian (1989). It is also shown that the n-cube network with n⩾5 remains connected provided that at most two neighbors of any processor are allowed to fail     

Properties and performance of folded hypercubes

A new hypercube-type structure, the folded hypercube (FHC), which is basically a standard hypercube with some extra links established between its nodes, is proposed and analyzed. The hardware overhead is almost 1/n, n being the dimensionality of the hypercube, which is negligible for large n. For this new design, optimal routing algorithms are developed and proven to be remarkably more efficient than those of the conventional n-cube. For one-to-one communication, each node can reach any other node in the network in at most [n/2] hops (each hop corresponds to the traversal of a single link), as opposed to n hops in the standard hypercube. One-to-all communication (broadcasting) can also be performed in only [n/2] steps, yielding a 50% improvement in broadcasting time over that of the standard hypercube. All routing algorithms are simple and easy to implement. Correctness proofs for the algorithms are given. For the proposed architecture, communication parameters such as average distance, message traffic density, and communication time delay are derived. In addition, some fault tolerance capabilities of this architecture are quantified and compared to those of the standard cube. It is shown that this structure offers substantial improvement over existing hypercube-type networks in terms of the above-mentioned network parameters     

An efficient distributed knot detection algorithm

A distributed knot detection algorithm for general graphs is presented. The knot detection algorithm uses at most O(n log n+m) messages and O(m+n log n) bits of memory to detect all knots' nodes in the network (where n is the number of nodes and m is the number of links). This is compared to O(n²) messages needed in the best algorithm previously published. The knot detection algorithm makes use of efficient cycle detection and clustering techniques. Various applications for the knot detection algorithms are presented. In particular, its importance to deadlock detection in store and forward communication networks and in transaction systems is demonstrated     

Fault-tolerant embedding of complete binary trees in hypercubes

The focus is on the following graph-theoretic question associated with the simulation of complete binary trees by faulty hypercubes: if a certain number of nodes or links are removed from an n-cube, will an (n-1)-tree still exists as a subgraph? While the general problem of determining whether a k-tree, k< n, still exists when an arbitrary number of nodes/links are removed from the n-cube is found to be NP-complete, an upper bound is found on how many nodes/links can be removed and an (n-1)-tree still be guaranteed to exist. In fact, as a corollary of this, it is found that if no more than n-3 nodes/links are removed from an (n-1)-subcube of the n-cube, an (n-1)-tree is also guaranteed to exist     

Parallel binary search

Two arrays of numbers sorted in nondecreasing order are given: an array A of size n and an array B of size m, where n<m. It is required to determine, for every element of A, the smallest element of B (if one exists) that is larger than or equal to it. It is shown how to solve this problem on the EREW PRAM (exclusive-read exclusive-write parallel random-access machine) in O(logm logn/log log m) time using n processors. The solution is then extended to the case in which fewer than n processors are available. This yields an EREW PRAM algorithm for the problem whose cost is O(n log m, which is O(m)) for n⩽m/log m. It is shown how the solution obtained leads to an improved parallel merging algorithm     

Balanced parallel sort on hypercube multiprocessors

A parallel sorting algorithm for sorting n elements evenly distributed over 2^d p nodes of a d-dimensional hypercube is presented. The average running time of the algorithm is O((n log n)/p+p log 2n). The algorithm maintains a perfect load balance in the nodes by determining the (kn/p)th elements (k1,. . ., (p-1)) of the final sorted list in advance. These p-1 keys are used to partition the sorted sublists in each node to redistribute data to the nodes to be merged in parallel. The nodes finish the sort with an equal number of elements (n/ p) regardless of the data distribution. A parallel selection algorithm for determining the balanced partition keys in O(p log2n) time is presented. The speed of the sorting algorithm is further enhanced by the distance-d communication capability of the iPSC/2 hypercube computer and a novel conflict-free routing algorithm. Experimental results on a 16-node hypercube computer show that the sorting algorithm is competitive with the previous algorithms and faster for skewed data distributions     

Computing the width of a set

For a set of points P in three-dimensional space, the width of P, W (P), is defined as the minimum distance between parallel planes of support of P. It is shown that W(P) can be computed in O(n log n +I) time and O(n) space, where I is the number of antipodal pairs of edges of the convex hull of P, and n is the number of vertices; in the worst case, I=O( n²). For a convex polyhedra the time complexity becomes O(n+I). If P is a set of points in the plane, the complexity can be reduced to O(nlog n). For simple polygons, linear time suffices     

Parallel implementation of the extended square-root covariancefilter for tracking applications

Parallel implementations of the extended square-root covariance filter (ESRCF) for tracking applications are developed. The decoupling technique and special properties used in the tracking Kalman filter (KF) are employed to reduce computational requirements and to increase parallelism. The application of the decoupling technique to the ESRCF results in the time and measurement updates of m decoupled (n/m)-dimensional matrices instead of one coupled n-dimensional matrix, where m denotes the tracking dimension and n denotes the number of state elements. The updates of m decoupled matrices are found to require approximately m fewer processing elements and clock cycles than the updates of one coupled matrix. The transformation of the Kalman gain which accounts for the decoupling is found to be straightforward to implement. The sparse nature of the measurement matrix and the sparse, band nature of the transition matrix are explored to simplify matrix multiplications     

M-dimensional Cayley-Hamilton theorem

The theorem states that every block square matrix satisfies its own m-D (m-dimensional, m⩾1) matrix characteristic polynomial. The exact statement and a simple proof of this theorem are given. The theorem refers to a matrix A subdivided into m blocks, and hence having dimension at least m. The conclusion is that every square matrix A with dimension M satisfies several m-D characteristic matrix polynomials with degrees N₁ . . ., N _m, such that N₁+ . . . +N_m ⩽M     

Least-squares estimation of transformation parameters between twopoint patterns

In many applications of computer vision, the following problem is encountered. Two point patterns (sets of points) {x_i} and {x_i}; i=1, 2, . . ., n are given in m-dimensional space, and the similarity transformation parameters (rotation, translation, and scaling) that give the least mean squared error between these point patterns are needed. Recently, K.S. Arun et al. (1987) and B.K.P. Horn et al. (1987) presented a solution of this problem. Their solution, however, sometimes fails to give a correct rotation matrix and gives a reflection instead when the data is severely corrupted. The proposed theorem is a strict solution of the problem, and it always gives the correct transformation parameters even when the data is corrupted     

Serial and parallel algorithms for the medial axis transform

An O(n²) time serial algorithm is developed for obtaining the medial axis transform (MAT) of an n×n image. An O(log n) time CREW PRAM algorithm and an O(log² n) time SIMD hypercube parallel algorithm for the MAT are also developed. Both of these use O(n²) processors. Two problems associated with the MAT, the area and perimeter reporting problem, are studied. An O(log n) time hypercube algorithm is developed for both of them, where n is the number of squares in the MAT, and the algorithms use O(n²) processors     

A novel discrete relaxation architecture

The discrete relaxation algorithm (DRA) is a computational technique that enforces arc consistency (AC) in a constraint satisfaction problem (CSP). The original sequential AC-1 algorithm suffers from O(n³m³) time complexity, and even the optimal sequential AC-4 algorithm is O (n²m²) for an n-object and m-label DRA problem. Sample problem runs show that these algorithms are all too slow to meet the need for any useful, real-time CSP applications. A parallel DRA5 algorithm that reaches a lower bound of O(nm) (where the number of processors is polynomial in the problem size) is given. A fine-grained, massively parallel hardware computer architecture has been designed for the DRA5 algorithm. For practical problems, many orders of magnitude of efficiency improvement can be reached on such a hardware architecture     

Optimal broadcasting on the star graph

The star graph has been show to be an attractive alternative to the widely used n-cube. Like the n-cube, the star graph possesses rich structure and symmetry as well as fault tolerant capabilities, but has a smaller diameter and degree. However, very few algorithms exists to show its potential as a multiprocessor interconnection network. Many fast and efficient parallel algorithms require broadcasting as a basic step. An optimal algorithm for one-to-all broadcasting in the star graph is proposed. The algorithm can broadcast a message to N processors in O(log₂ N) time. The algorithm exploits the rich structure of the star graph and works by recursively partitioning the original star graph into smaller star graphs. In addition, an optimal all-to-all broadcasting algorithm is developed     

The minimal dimension of stable faces required to guaranteestability of a matrix polytope: D-stability

The problem of determining whether a polytope P of n ×n matrices is D-stable-i.e. whether each point in P has all its eigenvalues in a given nonempty, open, convex, conjugate-symmetric subset D of the complex plane-is discussed. An approach which checks the D-stability of certain faces of P is used. In particular, for each D and n the smallest integer m such that D-stability of every m-dimensional face guarantees D-stability of P is determined. It is shown that, without further information describing the particular structure of a polytope, either (2n-4)-dimensional or (2n-2)-dimensional faces need to be checked for D-stability, depending on the structure of D. Thus more work needs to be done before a computationally tractable algorithm for checking D-stability can be devised     

Efficient algorithms for list ranking and for solving graphproblems on the hypercube

A hypercube algorithm to solve the list ranking problem is presented. Let n be the length of the list, and let p be the number of processors of the hypercube. The algorithm described runs in time O(n/p) when n=Ω(p ^1+ε) for any constant ε>0, and in time O(n log n/p+log³ p) otherwise. This clearly attains a linear speedup when n=Ω(p ^1+ε). Efficient balancing and routing schemes had to be used to achieve the linear speedup. The authors use these techniques to obtain efficient hypercube algorithms for many basic graph problems such as tree expression evaluation, connected and biconnected components, ear decomposition, and st-numbering. These problems are also addressed in the restricted model of one-port communication     

Network communication in edge-colored graphs: gossiping

A mechanism for scheduling communications in a network in which individuals exchange information periodically according to a fixed schedule is presented. A proper k edge-coloring of the network is considered to be a schedule of allowed communications such that an edge of color i can be used only at times i modulo k. Within this communication scheduling mechanism, the information exchange problem known as gossiping is considered. It is proved that there is a proper k edge-coloring such that gossip can be completed in a path of n edges in a certain time for n⩾k⩾1. Gossip can not be completed in such a path any earlier under any proper k edge-coloring. In any tree of bounded degree Δ and diameter d, gossip can be completed under a proper Δ edge-coloring in time (Δ-1)d +1. In a k edge-colored cycle of n vertices, other time requirements of gossip are determined     

On reliable computation with formal neurons

The authors investigate the computing capabilities of formal McCulloch-Pitts neurons when errors are permitted in decisions. They assume that m decisions are to be made on a randomly specified m set of points in n space and that an error tolerance of ϵm decision errors is allowed, with 0⩽ϵ<1/2. The authors are interested in how large an m can be selected such that the neuron makes reliable decisions within the prescribed error tolerance. Formal results for two protocols for error-tolerance-a random error protocol and an exhaustive error protocol-are obtained. The results demonstrate that a formal neuron has a computational capacity that is linear in n and that this rate of capacity growth persists even when errors are tolerated in the decisions     

Parameter convergence and stability in continuous-time indirectadaptive control

The author considers an indirect adaptive unity feedback controller consisting of an mth-order SISO (single input, single output) compensator controlling an nth-order strictly proper SISO plant. It is shown that exponential convergence of the plant parameter estimation error as well as asymptotic time invariance and global exponential stability of the controlled closed-loop system can be guaranteed by requiring that the reference input has at least 2n+m points of spectral support     

An efficient distributed protocol for finding shortest paths innetworks with negative weights

The design is discussed of distributed algorithms for the single-source shortest-path problem to run on an asynchronous directed network in which some of the edges may be associated with negative weights, and thus in which a cycle of negative total weight may also exist. The only existing solution in the literature for this problem is due to K.M. Chandy and J. Misra (1982), and it has, in the worst case, an unbounded message complexity. A synchronous version of the Chandy-Misra algorithm is described and studied, and it is proved that for a network with m edges and n nodes, the worst case message and time complexities of this algorithm are O(mn ) and O(n), respectively. This algorithm is then combined with an efficient synchronizer to yield an asynchronous protocol that retains the same message and time complexities     

Algorithms and bounds for shortest paths and diameter in faultyhypercubes

In an n-dimensional hypercube Qn, with the fault set |F|<2_n-2, assuming S and D are not isolated, it is shown that there exists a path of length equal to at most their Hamming distance plus 4. An algorithm with complexity O (|F|logn) is given to find such a path. A bound for the diameter of the faulty hypercube Qn-F, when |F|<2_n-2, as n+2 is obtained. This improves the previously known bound of n+6 obtained by A.-H. Esfahanian (1989). Worst case scenarios are constructed to show that these bounds for shortest paths and diameter are tight. It is also shown that when |F|<2n-2, the diameter bound is reduced to n+1 if every node has at least 2 nonfaulty neighbors and reduced to n if every node has at least 3 nonfaulty neighbors