A theory for the fracture of thin plates subjected to bending and twisting moments

Stress fields near the tip of a through crack in an elastic plate under bending and twisting moments are reviewed assuming both Kirchhoff and Reissner plate theories. The crack tip displacement and rotation fields based on the Reissner theory are calculated here for the first time. These results are used to calculate the J-integral (energy release rate) for both Kirchhoff and Reissner plate theories. Invoking Simmonds and Duva's [16] result that the value of the J-integral based on either theory is the same for thin plates, a universal relationship between the Kirchhoff theory stress intensity factors and the Reissner theory stress intensity factors is obtained for thin plates. Calculation of Kirchhoff theory stress intensity factors from finite elements based on energy release rate is illustrated. A small scale yielding like model of the crack tip fields is discussed, where the Kirchhoff theory fields are considered to be the far field conditions for the Reissner theory fields. It is proposed that, for thin plates, fracture toughness and crack growth rates be correlated with the Kirchhoff theory stress intensity factors.     

Hybrid stress finite element analysis of bending of a plate with a through flaw

A hybrid stress finite element procedure for the solution of bending stress intensity factors of a plate with a through-the-thickness crack is presented. Reissner's sixth-order plate theory including the effects of transverse shear deformation is used. The dominant singular crack tip stress field is embedded in the crack tip singular elements and only regular polynomial functions are assumed in the far field elements. The stress intensity factors can be calculated directly from the crack tip singular stress solution functions. The effects of the plate thickness, the ratio between the crack size and the inplane dimension of the plate, and the singular element size on the stress intensity factor solution are investigated. The effects of the explicit enforcement of traction-free conditions along crack surfaces, which are the natural boundary conditions in the present hybrid stress finite element model, are also investigated. The numerical results of bending of a plate with a straight central crack compare favourably with analytical solutions. It is also found that the explicit enforcement of traction-free conditions along crack surfaces is mandatory to obtain meaningful results for the Mode I type of bending stress intensity factor.     

Plastic intensity factors for cracked plates

An elastic-plastic analysis is performed for two problems relevant to fracture mechanics: a semiinfinite body with an edge crack in a far out-of-plane shearing field and an infinite plate under plane stress conditions containing a finite line crack in a remote tensile field. Amplitudes of the dominant singularity in the plastic region at the crack tip, the plastic stress and strain intensity factors, are calculated for applied stress levels approaching the yield stress. A technique is developed for using the dominant singular solution in conjunction with the finite element method to make accurate calculations for the near-tip fields. Additionally, a comparative study of deformation theory with flow theory is performed for cracks in an anti-plane shear field. Elastic fracture mechanics is extended to high levels of applied stress for which the plastic zone is no longer small compared to the crack length by relating the critical stress for fracture initiation to the plastic intensity factors.     

Computation of membrane and bending stress intensity factors for thin,cracked plates

The crack tip stress fields for plate bending and membrane loading problems are reviewed and the four stress intensity factors that determine these fields are defined. These four stress intensity factors arise from use of Kirchhoff plate theory to account for the bending loads and two dimensional plane stress elasticity to account for the membrane loads. The energy release rate is related to the stress intensity factors and to the stress resultants of plate theory. Virtual crack extension, nodal release and modified crack closure integral methods are discussed for computing components of the energy release rate from finite element analyses of cracked plates. Sample computations of stress intensity factors for single and mixed mode cases are presented for a crack in an infinite plate. Sample computations of stress intensity factors for a double edge notched tension-torsion test specimen are given as well.School of Civil and Environmental Engineering, Cornell University     

A numerical analysis of cracks emanating from a square hole in a rectangular plate under biaxial loads

This note concerns with stress intensity factors of cracks emanating from a square hole in rectangular plate under biaxial loads by means of the boundary element method which consists of the non-singular displacement discontinuity element presented by Crouch and Starfied and the crack tip displacement discontinuity elements proposed by the author. In the boundary element implementation the left or the right crack tip displacement discontinuity element is placed locally at corresponding left or right crack tip on top of the constant displacement discontinuity elements that cover the entire crack surface and the other boundary. The present numerical results illustrate that the present approach is very effective and accurate for calculating stress intensity factors of complicated cracks in a finite plate and can reveal the effect of the biaxial load and the cracked body geometry on stress intensity factors.     

An elastic-plastic finite element analysis of crack tip fields under biaxial loading conditions

A square plate containing a central crack and subjected to biaxial stresses has been studied by a finite element analysis. An elastic analysis shows that the crack opening displacement and stress of separation ahead of the crack tip are not affected by the mode of biaxial loading and therefore the stress intensity factor adequately describes the crack tip states in an elastic continuum.

An elastic-plastic analysis involving more than localized yielding at the crack tip provides different solutions of crack tip stress fields and crack face displacements for the different modes of biaxial loading.

The equi-biaxial loading mode causes the greatest separation stress but the smallest plastic shear ear and crack displacement. The shear loading system induces the maximum size of shear ear and crack displacement but the smallest value of crack tip separation stress.

     

裂纹面荷载作用下多裂纹应力强度因子计算

该文基于比例边界有限元法计算了裂纹面荷载作用下平面多裂纹应力强度因子.比例边界有限元法可以给出裂纹尖端位移场和应力场的解析表达式,该特点可以使应力强度因子根据定义直接计算,同时不需要对裂纹尖端进行特殊处理.联合子结构技术可以计算多裂纹问题的应力强度因子.数值算例表明该文方法是有效且高精确的,进而推广了比例边界有限元法的...     

Determination of effective stress intensity factors under mixed-mode from digital image correlation fields in presence of contact stresses and plasticity

Digital image correlation (DIC) is more and more popular to monitor fatigue crack growth and to determine the stress intensity factors. However, the posttreatment of the recorded displacement fields becomes tricky when the crack faces are not stress-free and when crack tip plasticity becomes significant. Several posttreatment methods to locate the crack tip and measure the effective stress intensity factors in such cases are compared, using finite element method-computed displacement fields, and then used on real DIC fields. An approach coupling DIC and finite element method is proposed to estimate the contact stresses along the crack.     

Williams meets von Karman: Mode coupling and nonlinearity in the fracture of thin plates

The stress field near the tip of a crack in a plate subjected to membrane and bending loads and undergoing large deflections, is investigated by performing an asymptotic analysis in the context of von Karman plate theory. It is demonstrated that the character of the near tip fields is identical to those of the linear plate theory. However, the determination of the crack tip stress intensity factors requires the solution of a large deflection, and hence nonlinear, problem due to the coupling of the membrane and bending modes. This effect is illustrated through the solution of three fracture problems involving plates of simple geometries loaded by pressure, tension and shearing. In two of these problems, the energy release rate is obtained exactly. Nonlinear finite element computations are performed to obtain the stress intensity factors and energy release rate associated with tension, bending and shearing. These results are compared to the theoretical results for energy release rate and stress intensity factors. This revised version was published online in July 2006 with corrections to the Cover Date.     

Numerical simulations of cracked plate using XIGA under different loads and boundary conditions

This article deals with the numerical simulation of cracked plate using extended isogeometric analysis (XIGA) under different loads and boundary conditions. The plate formulation is done using first-order shear deformation theory. The crack faces are modeled by the Heaviside function, whereas the singularity in stress field at the crack tip is modeled by crack tip enrichment functions. The stress intensity factors for the cracked plate are numerically computed using a domain-based interaction integral. The results obtained by XIGA for the center and edge crack plate are compared with extended finite element method and/or literature results for different types of loads and boundary conditions.     

Numerical simulation of stress-strain state near crack tip in a compact tensile specimen

A computational scheme has been developed and a numerical simulation of the stress-strain state near the crack tip is performed at different levels of the stress intensity factor using a compact tensile specimen as an example. The authors analyze the influence of the finite element size near the crack tip and compare the results obtained in different codes (software packages) for different crack geometries. __________ Translated from Problemy Prochnosti, No. 1, pp. 134–140, January–February, 2009.     

Stress intensity factors of a central interface crack in a bonded finite plate and periodic interface cracks under arbitrary material combinations

Although a lot of interface crack problems were previously treated, few solutions are available under arbitrary material combinations. This paper deals with a central interface crack in a bonded finite plate and periodic interface cracks. Then, the effects of material combination and relative crack length on the stress intensity factors are discussed. A useful method to calculate the stress intensity factor of interface crack is presented with focusing on the stress at the crack tip calculated by the finite element method.     

Stress intensity factor for center-cracked plate with crack surface interference

This paper presents a simple and physically acceptable analysis of stress intensity factor (SIF) for the center-cracked infinite and finite-width plates. The analysis includes the effect of crack surface interference (i.e., the upper and lower crack surfaces are not allowed to overlap) that influences both the SIF at the tension-side crack tip and the crack opening displacement (COD) profile. For an infinite plate, exact solutions are obtained by superimposing the classical (overlapping) solutions. For a finite-width plate, where the SIF solutions cannot be found in closed form, the solutions are carried out numerically. The overlapping SIF solutions from the weight function method are used. An example is given for the case of a finite-width plate under bending. It was found that the overlapping solutions underestimate the stress intensity factor at the tension-side crack tip up to 15%. The analysis results are also compared with the finite element solutions for verification purpose.     

The effects of heterogeneity and anisotropy on the size effect in cracked polycrystalline films

A model is developed for quantifying the size effect due to heterogeneity and anisotropy in polycrystalline films. The Monte Carlo finite element calculations predict the average and standard deviation of the microscopic (local) stress intensity factors and energy release rate of a crack in a columnar aggregate of randomly orientated, perfectly bonded, orthotropic crystals (grains) under plane deformation. The boundary of the near-tip region is subjected to displacement boundary conditions associated with a macroscopic (far field or nominal) Mode-I stress intensity factor and average elastic constants calculated for the uncracked film with a large number of grains. The average and standard deviation of the microscopic stress intensity factors and energy release rate, normalized with respect to the macroscopic parameters, are presented as functions of the number of grains within the near-tip region, and the parameters that quantify the level of crystalline anisotropy. It is shown that for a given level of anisotropy, as long as the crack tip is surrounded by at least ten grains, then the expected value and standard deviation of the crack tip parameters are insensitive to the number of crystals. For selected values of crystalline anisotropy, the probability distributions of Mode-I stress intensity factor and stress ahead of the crack are also presented. The results suggest that the size effect due to heterogeneity and anisotropy is weak; crack initiation load and direction are governed only by the details of the grains in the immediate vicinity of the crack tip. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal effect of plastic dissipation at the crack tip on the stress intensity factor under cyclic loading

Plastic dissipation at the crack tip under cyclic loading is responsible for the creation of an heterogeneous temperature field around the crack tip. A thermomechanical model is proposed in this paper for the theoretical problem of an infinite plate with a semi-infinite through crack under mode I cyclic loading both in plane stress or in plane strain condition. It is assumed that the heat source is located in the reverse cyclic plastic zone. The proposed analytical solution of the thermo-mechanical problem shows that the crack tip is under compression due to thermal stresses coming from the heterogeneous stress field around the crack tip. The effect of this stress field on the stress intensity factor (its maximum and its range) is calculated analytically for the infinite plate and by finite element analysis. The heat flux within the reverse cyclic plastic zone is the key parameter to quantify the effect of dissipation at the crack tip on the stress intensity factor.     

Fracture mechanics parameters for cracks on a slightly undulating interface

Typical bimaterial interfaces are non-planar due to surface facets or roughness. Crack-tip stress fields of an interface crack must be influenced by non-planarity of the interface. Consequently, interface toughness is affected. In this paper, the crack-tip fields of a finite crack on an elastic/rigid interface with periodic undulation are studied. Particular emphasis is given to the fracture mechanics parameters, such as the stress intensity factors, crack-tip energy release rate, and crack-tip mode mixity. When the amplitude of interface undulation is very small relative to the crack length (which is the case for rough interfaces), asymptotic analysis is used to convert the non-planarity effects into distributed dislocations located on the planar interface. Then, the resulting stress fields near the crack tip are obtained by using the Fourier integral transform method. It is found that the stress fields at the crack tip are strongly influenced by non-planarity of the interface. Generally speaking, non-planarity of the interface tends to shield the crack tip by reducing the crack-tip stress concentration.     

Evaluating mixed-mode stress intensity factors from full-field displacement fields obtained by optical methods

A method for evaluating mode I, mode II and mixed-mode stress intensity factors from in-plane displacement fields using the method of nonlinear least-squares is proposed in this paper. Along with stress intensity factors, crack tip location and rigid body displacement components are determined simultaneously from both displacement components obtained using full-field optical methods or numerical methods. The effectiveness is validated by applying the proposed method to mixed-mode displacement fields obtained through digital image correlation, displacement fields obtained by analysis using elasto-plastic finite element method, and displacement fields around a fatigue crack obtained by electronic speckle pattern interferometry. Results show that the proposed method can extract stress intensity factors from the displacement fields both accurately and easily. Furthermore, they can be determined even if the material at a crack tip exhibits small-scale yielding. It is expected that the proposed method is applicable to various fracture problems during experimental and numerical evaluation of structural components.     

Progressive edge cracked aluminium plate repaired with adhesively bonded composite patch under full width disbond

In this study, the crack growth behaviour of an aluminium plate cracked at the tip and repaired with a bonded boron/epoxy composite patch in the case of full-width disbond was investigated. This effect is the imperfection which could result during the bonded patch of the repaired structure. Disbonds of various sizes and situated at different positions with respect to the crack tip as well as the effect of adhesive and patch thickness on repair performance were examined. An analysis procedure involving the efficient finite element modelling applied to cracked plate, adhesive and composite patch was used to compute the stress intensity factors. The crack growth rate is dominated by the stress intensity factor near the location and size of the pre-existing disbonds. The cracked plate and disbond propagation result in an increase in the patch deformation. The patch does not have an influence on the crack growth when the ratio 2a/d_R exceeds 0.8.     

Weight function calculation for surface cracks using the line-spring model

A numerical method for calculating weight functions for surface cracks in plates and shells is proposed. Thick-shell finite elements are used to create the discrete model of a body with a through-wall flaw. Line-spring elements transform the through-wall flaw into a surface crack. A quadratic line-spring element is presented. Weight functions for some semielliptical surface cracks in a plate have been calculated. The weight functions obtained may be used for computing stress intensity factors related to two-dimensional stress fields at the crack surface.