共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
为了满足现代化工业色谱分离的要求,对模拟移动床(SMB)色谱分离的工艺流程进行了改进,设计了一套由工控机、PLC和智能仪表构成的模拟移动床集散控制系统。用改进的BP神经网络对苯丙氨酸模拟移动床的色谱分离过程进行了建模,用实数编码的遗传算法对分离参数和操作条件进行了优化,并在实际中得到应用,使得产品的纯度和回收率都得到了较大的提高。并且在开发过程中,上位机软件采用国产“组态王”和VB相结合的方式,克服了“组态王”命令语言环境较弱的缺点。 相似文献
3.
4.
5.
通过HPLC单柱实验,确定了盐酸度洛西汀的拆分条件。采用平衡扩散模型对盐酸度洛西汀在8柱四区模拟移动床上的线性分离过程进行了模拟,主要考察了切换时间对分离效果的影响。在适宜的操作条件下,达到了较好的分离效果。两种对映体的纯度分别达到99.67%和99.62%,回收率分别达到了96.30%和97.14%。本研究对盐酸度洛西汀的生产应用具有一定的指导意义和参考价值。 相似文献
6.
7.
8.
在保证产品纯度的情况下,提出一种带额外色谱柱的双部分丢弃策略以提高模拟移动床的产率。通过将工艺点选取在纯提取产品和非纯提余产品区域以增大进料流量,并将由此导致的含较多杂质的提余产品暂时丢弃。丢弃的提余产品作为循环进料通入到一个额外色谱柱中以进一步分离,部分不能达到指定纯度的额外产品被永久丢弃。在模拟移动床和额外色谱柱处分别收集到的产品组成总产品。分析了工艺点的选取、提余产品的积分纯度阈值和额外产品的积分纯度阈值对总产品性能参数的影响。研究结果表明,所提策略能够以较高的回收率利用原料,且能够显著提高分离过程的产率,其分离效果优于传统的模拟移动床工艺和部分丢弃策略。 相似文献
9.
在保证产品纯度的情况下,提出一种带额外色谱柱的双部分丢弃策略以提高模拟移动床的产率。通过将工艺点选取在纯提取产品和非纯提余产品区域以增大进料流量,并将由此导致的含较多杂质的提余产品暂时丢弃。丢弃的提余产品作为循环进料通入到一个额外色谱柱中以进一步分离,部分不能达到指定纯度的额外产品被永久丢弃。在模拟移动床和额外色谱柱处分别收集到的产品组成总产品。分析了工艺点的选取、提余产品的积分纯度阈值和额外产品的积分纯度阈值对总产品性能参数的影响。研究结果表明,所提策略能够以较高的回收率利用原料,且能够显著提高分离过程的产率,其分离效果优于传统的模拟移动床工艺和部分丢弃策略。 相似文献
10.
模拟移动床(SMB)是混合二甲苯分离的重要技术。模拟移动床区域回流比是决定产品质量的关键参数。在真实移动床(TMB)建模方法基础上,结合实际工况数据,建立了模拟移动床吸附分离过程机理模型,并通过分析区域回流比对产品质量的影响,得到不同产品质量要求以及进料品质的情况下区域回流比的操作区间。仿真结果表明,TMB建模方法能较好地描述模拟移动床实际工况。基于机理模型对操作区间的分析结果可以为模拟移动床分离过程的工艺设计和操作提供指导意见。 相似文献
11.
12.
13.
Dinesh Singh J. K. Gehlawat Musti S. Rao 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1990,47(2):127-136
Oslefins and diolefins are important intermediates in the petrochemical industry and the future promises a further substantial increase in demand. While several catalysts have been formulated in the past for the abstraction of hydrogen from butenes and propylene, these catalysts are inefficient in the abstraction of first hydrogen from butane. Bismuth molybdates (β and γ-phases) containing iron oxide and supported on alumina are used as catalysts in the present investigation on the oxidative dehydrogenation of n-butane. Effects of catalyst content, temperature and oxygen: n-butane ratio on conversion and selectivity to butadiene and (C4H8 + C4H6) are studied in the following ranges of experimental conditions: β-bismuth molybdate/100 mol support I(K), 3–9; γ-bismuth molybdate/100 mol support I(K), 5-20; temperature, 400–500°C; O2: butane ratio, 0.6:1.7. 相似文献
14.
考登钢作为一种高耐候结构钢,广泛应用于各个领域。在火力发电方面,考登钢主要应用在工作环境比较恶劣的烟气加热器和空气预热器中。考登钢表面涂搪的目的就是进一步提高其耐腐蚀性能,延长使用寿命。为了提高考登钢元件的使用寿命,对考登钢表面涂搪瓷的可行性、密着性能、瓷釉、工艺控制、质量保证等方面进行了研究。 相似文献
15.
A viscometer used to measure the viscosity of 10 μl of a liquid, must be miniaturized down, and the liquid velocity gradient in the channel used to determine the viscosity coefficient. Two major factors that affect the liquid velocity are the mechanical forces exerted by the mechanical motors and electromagnetic forces. In this study, electrowetting on dielectric (EWOD) is adopted to drive liquids. Variously sized electrodes on a chip, and two shapes of channel are employed to measure the velocity gradient to determine the viscosity coefficient. The device is fabricated by microelectromechanical system (MEMS) technology. The dielectric layer used in EWOD has a high dielectric constant, BST (Ba0.7Sr0.3TiO3), to reduce the required applied voltage; its surface is coated with hydrophobic polymer, polytetrafluoro-ethylene (PTFE, Teflon® AF DuPont). Experimental results demonstrate that liquids can be pulled at 660 μm/s in linear channels by applying a voltage of 15 V. 相似文献
16.
研究了温度和pH值对漆酶酶活以及漆酶处理纤维压制纤维板性能的影响。结果表明,pH较低、温度较高时漆酶酶活较高,压制的纤维板强度性能较好。但温度太高(60~80℃),延长加热时间,漆酶稳定性变差,酶活明显降低,压制纤维板的强度下降。 相似文献
17.
In reexamining medium effects on photochemical reactions, we have emphasized those on unequilibrated excited species such as the Franck-Condon species. Despite recent advances in femtochemistry, such a discussion in molecular photochemistry is uncommon, and the problem remains challenging on account of the extremely short-lived excited species. However, in such cases, a small perturbation resulting from, for example, weak guest-host interactions could turn into a determining factor in dictating the course of a photochemical channel of deactivation. Examples of medium-directed diabatic processes have been examined with this idea in mind. A modified view on rhodopsin photoisomerization is presented along with the consideration that confinement does not necessarily lead to inhibition of reactions of the trapped substrate. 相似文献
18.
19.
20.
采用实验方法考察工艺参数对沉降斑的影响。基于一个带凸台的平板模具,采用L27(313)正交矩阵进行实验,研究了几何尺寸、熔体温度、注射时间、保压压力及保压时间对厚度突变处沉降斑形成的影响,同时还考虑了熔体温度和注射时间以及保压压力和注射时间之间的交互作用影响;通过性噪比分析和F检验优化成型工艺条件并对工艺参数的影响进行显著性分析。结果表明,对于厚度突变的平板制品,厚度突变的程度对其沉降斑形成的影响最大,其次为熔体温度,保压压力,保压时间等;采取减小厚度变化,降低熔体温度或增加保压压力和保压时间等措施,可以减小厚度突变处沉降斑,从而减少其对外观质量的影响;因素之间的交互作用对制品沉降斑的形成有一定的影响,熔体温度B和注射时间C之间的交互作用影响较为明显,而保压压力D和注射时间C之间的交互作用对该质量指标的影响最小,可以并入误差。 相似文献