Holographically recorded axicon for grazing incidence interferometry

Abstract

A diffractive axicon for grazing incidence interferometry of cylindrical objects is presented. For industrial measurement, an element with a diameter of 8 cm was manufactured. The axicon was recorded in dichromated gelatine (DCG) with a high-precision rotating stage. The diffraction theory for the design of the element is presented. The axicon was tested interferometrically. Some possible errors are discussed.     

Simple lens axicon

We present the design of a cemented doublet-lens axicon made from spherical surfaces only. Compared with diffractive axicons, refractive cone axicons, and earlier lens axicons with aspheric surfaces, this element is inexpensive and easy to manufacture even with large apertures. The lens axicon is based on the deliberate use of the spherical aberration of the surfaces. The design principles of the element and its characterization, numerically and experimentally, are presented in detail. Although performance was traded for simplicity and robustness, the results show that the lens axicon has the main axicon properties: a narrow, extended line focus of relatively constant width.     

Systematic design of an anastigmatic lens axicon

We present an analytical method for systematic optical design of a double-pass axicon that shows almost no astigmatism in oblique illumination compared to a conventional linear axicon. The anastigmatic axicon is a singlet lens with nearly concentric spherical surfaces applied in double pass, making it possible to form a long narrow focal line of uniform width. The front and the back surfaces have reflective coatings in the central and annular zones, respectively, to provide the double pass. Our design method finds the radii of curvatures and axial thickness of the lens for a given angle between the exiting rays and the optical axis. It also finds the optimal position of the reflecting zones for minimal vignetting. This method is based on ray tracing of the real rays at the marginal heights of the aperture and therefore is superior to any paraxial method. We illustrate the efficiency of the method by designing a test axicon with optical parameters used for a prototype axicon, which was manufactured and experimentally tested. We compare the optical characteristics of our test axicon with those of the experimental prototype.     

Self-referenced spectral interferometry cross-checked with SPIDER on sub-15 fs pulses

We characterized 11.7 fs nearly perfect Fourier Transform pulses with self-referenced spectral interferometry (SRSI), a new recently demonstrated technique. These pulses were first precisely optimized with three feedback loops between the SRSI setup and an AOPDF. An inherent control criterion to confirm that the measurement quality is theoretically derived and experimentally demonstrated. Each experimental result was cross-checked with SPIDER.     

Simultaneous characterization of the quality and orientation of cylindrical lens surfaces

A diffractive grazing-incidence interferometer for the test of cylindrical lenses is described. Besides surface aberrations from the ideal shape, the interferometer allows for the simultaneous determination of the relative position and orientation of surfaces to another. The measurement principle as well as a classification of deviation types is given. Measurement results for planar concave lenses are presented.     

Measurement of the surface profile of an axicon lens with a polarization phase-shifting shearing interferometer

We present a Twyman-Green interferometer (TGI)-based polarization phase-shifting shearing interferometric technique for testing the conical surface of an axicon (AX) lens. In this technique, the annular beam generated due to the passing of an expanded collimated laser beam traveling along the axis of revolution of the transparent glass AX element is split up into its reflected and transmitted components, having the plane of polarization in the orthogonal planes, by the polarization beam splitter (PBS) cube of the TGI-based optical setup. The split-up components are made to travel unequal paths along the two arms of the TGI and are recombined by the PBS. Because of the difference in path lengths traveled by the annular conical beams, a linear shear is introduced along the radial direction between the interfering components. Thus, the resulting interference pattern gives a map of the optical path difference (OPD) between two successive close points along a radial direction on the conical surface of the AX lens. The OPD map along radial directions, and hence the slopes/profiles of the conical surface, are obtained by applying polarization phase-shifting interferometry. Results obtained for an AX lens are presented.     

The analytical description and experiments of the optical bottle generated by an axicon and a lens

Based on the interferential theory, we deduce a new type of analytic expression suitable for describing the evolutions of the optical bottle beam generated from the axicon-lens optical system illuminated by the Gaussian beam for the first time. The theory does not use much approximation in the process of mathematical analysis and can better illustrate the optical bottle beam evolutions at any positions. With the derived expression, the three-dimensional (3D) longitudinal and transverse intensity profiles of the optical bottle beam are simulated numerically. The numerical calculations have been confirmed by the experimental results.     

Three-dimensional shape measurement beyond the diffraction limit of lens using speckle interferometry

Speckle interferometry is generally known as a method for measuring the deformation of an object with rough surfaces. In this paper, a three-dimensional (3D) shape measurement method is proposed for superfine structures beyond the diffraction limit using the basic property of speckle interferometry. Since the differential coefficient distribution of the shape of such an object can be detected in speckle interferometry by imparting a known lateral shift to the measured object, the shape can be reconstructed by integrating the differential coefficient distribution. Based on experimental results obtained using diffraction gratings as measured objects, it is confirmed that the proposed method can measure 3D shapes that are beyond the diffraction limit of the lens.     

Alternative method for measuring the full-field refractive index of a gradient-index lens with normal incidence heterodyne interferometry

A linearly/circularly polarized heterodyne light beam coming from a heterodyne light source with an electro-optic modulator in turn enters a modified Twyman-Green interferometer to measure the surface plane of a GRIN lens. Two groups of periodic sinusoidal segments recorded by a fast complementary metal-oxide semiconductor camera are modified, and their associated phases are derived with the unique technique. The data are substituted into the special equations derived from the Fresnel equations, and the refractive index can be obtained. When the processes are applied to other pixels, the full-field refractive-index distribution can be obtained similarly. Its validity is demonstrated.     

Demonstration of a Fresnel axicon

We design and manufacture a Fresnel axicon (fraxicon) that generates a quasi-diffraction-free/Bessel beam with a large depth of field. The novel optical element is characterized with both coherent and incoherent light, and its behavior is compared with that of a classical axicon. While the fraxicon exhibits a strong interference pattern in the on-axis intensity distribution, it can be smoothed out when using broadband light, partial spatial coherence light, or by period randomization. As inexpensive, compact/lightweight, and low-absorption elements, fraxicons may find applications in imaging, illumination, and situations where low absorption and dispersion are important.     

Complete characterization of optical pulses by real-time spectral interferometry

We demonstrate a simple method for complete characterization (of amplitudes and phases) of short optical pulses, using only a dispersive delay line and an oscilloscope. The technique is based on using a dispersive delay line to stretch the pulses and recording the temporal interference of two delayed replicas of the pulse train. Then, by transforming the time domain interference measurements to spectral interferometry, the spectral intensity and phase of the input pulses are reconstructed, using a Fourier-transform algorithm. In the experimental demonstration, mode-locked fiber laser pulses with durations of approximately 1 ps were characterized with a conventional fast photodetector and an oscilloscope.     

Extended depth of field through an axicon

One of the main disadvantages of imaging systems is the limited depth of field. We present the ability of a refractive axicon for imaging with an extended depth of field. We design an imaging system with a two-step imaging approach that uses a CCD camera to capture intermediate images and uses a digital process to obtain the final images. The depth of field is analyzed based on the condition of the focal segment. In particular, the point spread functions (PSFs) are discussed in simulation in detail. The performed experiments validate the effect and feasibility of the axicon for imaging with an extending depth of field.     

Design and manufacture of a gradient-index axicon

A gradient-index axicon with its initial focus offset from the back surface was designed with the thin-lens approximation. Two samples were fabricated by means of the time-varying boundary condition diffusion method, which is based on the modified quasi-chemical diffusion model. Intensity profile measurements were taken along the focal region of the axicons. The samples produced extended line foci. From the intensity measurements, the central spot widths and back focal lengths were determined. The peak widths matched theoretical predictions made with the diffraction theory for the samples and showed good agreement with the predicted widths for a pseudo-Bessel beam, showing that the axicon produced a pseudo-diffractionless beam.     

Diffraction property of an axicon in oblique illumination

The intensity distribution of a diffraction pattern in obliqueillumination is derived analytically. Experimental results arecompared with the results of theoretical analyses. Good agreementbetween them has been obtained.     

Two-photon interferometry for high-resolution imaging

This paper discusses the advantages of using non-classical states of light for two aspects of optical imaging: the creation of microscopic images on photosensitive substrates, which constitutes the foundation for optical lithography, and the imaging of microscopic objects. In both cases, the classical resolution limit given by the Rayleigh criterion is approximately half of the optical wavelength. It has been shown, however, that by using multi-photon quantum states of the light field, and a multi-photon sensitive material or detector, this limit can be surpassed. A rigorous quantum mechanical treatment of this problem is given, some particularly widespread misconceptions are addressed, and turning quantum imaging into a practical technology is discussed.     

Tilt-compensating algorithm for phase-shift interferometry

A self-calibrating algorithm for phase-shift interferometry is described that is able to cancel the effect of accidental relative tilts that may occur during phase stepping. The algorithm is able to retrieve both the phase steps and the tilts that accompany them. Only three phase-shifted interferograms are needed, and no other information about the intentional phase shifts or possible tilts has to be supplied. This purpose is achieved by division of the interferogram space into blocks on which a previously reported self-calibrating algorithm is applied and the actual values of the local phase shifts are calculated. The information thus obtained is used for extracting the global shift and tilt values. Further improvement in the results is achieved by means of a fitting routine.     

Achromatic phase-shifting for white-light interferometry

The geometric (Pancharatnam) phase provides a method of introducing a variable phase shift that is almost independent of the wavelength and opens up new possibilities in broadband interferometry.