Hydration of 3CaO·Al2O3 and 3CaO·Al2O3+] Gypsum With and Without CaCl2

Paste samples of tricalcium aluminate alone, with CaCl₂, with gypsum, and with gypsum and CaCl₂ were hydrated for up to 6 months and the hydration products characterized by SEM, XRD, and DTA. Tricalcium aluminate hydrated initially to a hexagonal hydroaluminate phase which then changed to the cubic form; the transformation rate depended on the size and shape of the sample and on temperature. The addition of CaCl₂ to tricalcium aluminate resulted in the formation of 3CaO · Al₂O₃· CaCl₂·10H₂O and 4CaO · Al₂O₃· 13H₂O, or a solid solution of the two. The chloride retarded the formation of the cubic phase 3CaO · Al₂O₃· 6H₂O; the addition of gypsum resulted in the formation of monosulfoaluminate with a minor amount of ettringite. When chloride was added to tricalcium aluminate and gypsum, more ettringite was formed, although 3CaO · Al₂O₃· CaSO₄· 12H₂O and 3CaO · Al₂O₃· CaCl₂· 10H₂O were the main hydration products.     

Influence of Citric Acid on Reactions in the System 3CaO·Al2O3-CaSO4·2H2O-CaO-H2O

The influence of citric acid on paste hydration of 3CaO· Al₂O₃ in the presence of CaSO₄·2H₂O and Ca(OH)₂ was studied using X-ray diffraction, scanning electron microscopy, and conduction calorimetry. The time at which the citric acid is added (either prior to or with the mixing water) determines how it affects the reactivity of the aluminate. Immediately after the paste is gaged citric acid promotes a more rapid reaction, but later reactions are retarded. Hexagonal calcium aluminate hydrates, ettringite, and monosulfate were all detected as early hydration products. The influence of citric acid on the hydration of 3CaO·Al₂O₃ slabs immersed in saturated CaSO₄·2H₂O solutions was also studied and a reaction scheme proposed.     

The Effects of Prehydration on the Liquid Hydration of 3CaO·Al2O3 with CaSO 4·2H2O

Liquid hydration and water-vapor hydration of 3CaO·Al₂O₃, were studied. Variable parameters were hydration time, temperature, relative humidity, and amount of gypsum. The hydration products (gel, ettringite, hexagonal hydrates, and 3CaO·Al₂O₃·6H₂O) were studied by electron microscopy, X-ray diffractometry, and thermal analysis. A reaction scheme is proposed. The degree of water-vapor hydration influenced the sequence of the subsequent liquid hydration which, however, was independent of the composition of the water-vapor hydration products. Below a critical degree of water-vapor hydration (≊3% combined water) the reaction with liquid water occurred as if no water-vapor hydration had taken place. Above this value the reaction gave hydration products suggesting a change of the 3CaO·Al²O³ reactivity. A possible correlation with the retardation of strength development of prehydrated cement is suggested.     

The System CaO-Al2O3-H2O

Phase equilibria have been determined in the system CaO-Al₂O₃-H₂O in the temperature range 100° to 1000°C. under water pressures of up to 3000 atmospheres. Only three hydrated phases are formed stably in the system: Ca(OH)₂, 3CaO·Al₂O₃·6H₂O, and 4CaO·3Al₂O₃-3H₂O. Pressure-temperature curves delineating the equilibrium decomposition of each of these phases have been determined, and some ther-mochemical data have been deduced therefrom. It has been established that both the compounds CaO·Al₂O₃ and 3CaO·Al₂O₃ have a minimum temperature of stability which is above 1000°C. The relevance of the new data to some aspects of cement chemistry is discussed.     

The System MgO─P2O5─H2O at 25°C

The phase diagram for the ternary system MgO─P₂O₅─H₂O at 25°C has been constructed. The magnesium phosphates represented are Mg(H₂PO₄)₂· n H₂O ( n = 4, 2, 0), MgHPO₄·3H₂O, and Mg₃(PO₄)₂· m H₂O ( m = 8, 22). Because of the large differences in the solubilities of these compounds, the technique which involves plotting the mole fractions of MgO and P₂O₅ as their 10th roots has been employed. With the exception of MgHPO₄·3H₂O, the magnesium phosphates are incongruently soluble. Because incongruency is associated with a peritectic-like reaction, the phase Mg₂(PO₄)₃· 8H₂O persists metastably for an extended period.     

Thermodynamic Assessment of the CaO–MgO–Al2O3 System

The system CaO–MgO–Al₃O₃ has been assessed with the Calphad technique using a computerized optimization procedure called parrot . The rather meager experimental information, mainly on liquidus relations, is described reasonably well, but the lack of data, especially on solid-phase relations, implies that the present assessment should be regarded as provisional. The system contains one stable ternary phase with the stoichiometry 3CaO·2Al₂O₃·MgO.     

29Si and 27Al MASNMR Study of Stratlingite

Strätlingite (2CaO·Al₂O₃·SiO₂·8H₂O) is a complex calcium aluminosilicate hydrate commonly associated with the hydration of slag-containing cements or other cements enriched in alumina. Strätlingite can coexist with the hydrogarnet solid solution [hydrogarnet (3CaO·Al₂O₃·6H₂O)-katoite (3CaO·Al₂O₃·SiO₂·4H₂O)] and calcium silicate hydrate (C-S-H). Since Strätlingite is present in many blended cements, the knowledge of strätlingite's characteristic silicate anion structure and how aluminum is accommodated by the structure is important. Phase pure Strätlingite samples have been synthesized from oxides in the presence of excess water and from metakaolinite, calcium aluminate cement, CaO, NaOH, and water. The samples were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA) and then further examined using ²⁹Si, with and without cross-polarization (CP), and ²⁷Al solid-state magic angle nuclear magnetic resonance spectroscopy (MASNMR). For the most part, NMR data for these strätlingites corroborate structural information available in the literature. The aluminum atoms are both tetrahedrally and octahedrally coordinated, and the silicon atoms exist predominantly as Q₂, Q₂(1Al), and Q₂(2Al) species. The presence of alkali affects the structure of strätlingite in subtle ways, significantly reducing the Al^IV/A1^VI ratio.     

Conversion from β-Ce2O3·11Al2O3 to α-Al2O3 in Tetragonal ZrO2 Matrix

Composites of β-Ce₂O₃·11Al₂O₃ and tetragonal ZrO₂ were fabricated by a reductive atmosphere sintering of mixed powders of CeO₂, ZrO₂ (2 mol% Y₂O₃), and Al₂O₃. The composites had microstructures composed of elongated grains of β-Ce₂O₃·11Al₂O₃ in a Y-TZP matrix. The β-Ce₂O₃·11Al₂O₃ decomposed to α-Al₂O₃ and CeO₂ by annealing at 1500°C for 1 h in oxygen. The elongated single grain of β-Ce₂O₃·11Al₂O₃ divided into several grains of α-Al₂O₃ and ZrO₂ doped with Y₂O₃ and CeO₂. High-temperature bending strength of the oxygen-annealed α-Al₂O₃ composite was comparable to the β-Ce₂O₃·11Al₂O₃ composite before annealing.     

Studies on 4CaOAl2.O3.13H2O and the Related Natural Mineral Hydrocalumite

Single-crystal X-ray and electron-diffraction studies show the existence in one polymorph of 4CaO.Al₂O₃. 13H₂O of a hexagonal structural element with α= 5.74 a.u., c = 7.92 a. u. and atomic contents Ca₂(OH)₇- 3H₂O. These structural elements are stacked in a complex way and there are probably two or more poly-types as in SiC or ZnS. Hydrocalumite is closely related to 4CaO.A1₂O₃.13H₂O, from which it is derived by substitution of CO₃^2-for 20H^-+ 3H₂O once in every eight structural elements; similar substitutions explain the existence of compounds of the types 3CaO Al₂O₃.Ca Y ₂- xH₂O and 3CaO Al₂O₃ Ca Y xH₂O. On dehydration, 4CaO.Al₂O₃.13H₂O first loses molecular water and undergoes stacking changes and shrinkage along c. At 150° to 250°C., Ca(OH)₂ and 4CaO.3Al₂O₃.3H₂O are formed and, by 1000°C., CaO and 12CaO.7Al₂O₈. The dehydration of hydrocalumite follows a similar course, but no 4CaO.3Al₂O₃.3H₂O is formed.     

Kinetics of Growth of Al2O3 Whiskers

The kinetics of the growth of Al₂O₃ whiskers by the reaction of Al with a trace amount of H₂O in an H₂ atmosphere were studied. The activation energy in the region of constant growth rate was ∼77 kcal mol⁻¹. This activation energy value, in the light of thermodynamic calculations and other theoretical considerations, suggests that the rate-determining step in the growth of these whiskers is the dissociation of H₂O molecules on the surface of Al₂O₃.     

Uniformly Porous Al2O3/LaPO4 and Al2O3/CePO4 Composites with Narrow Pore-Size Distribution

Porous Al₂O₃/20 vol% LaPO₄ and Al₂O₃/20 vol% CePO₄ composites with very narrow pore-size distribution at around 200 nm have been successfully synthesized by reactive sintering at 1100°C for 2 h from RE₂(CO₃)₃· x H₂O (RE = La or Ce), Al(H₂PO₄)₃ and Al₂O₃ with LiF additive. Similar to the previously reported UPC-3Ds (uniformly porous composites with a three-dimensional network structure, e.g. CaZrO₃/MgO system), decomposed gases in the starting materials formed a homogeneous open porous structure with a porosity of ∼40%. X-ray diffraction, ³¹P magic-angle spinning nuclear magnetic resonance, scanning electron microscopy, and mercury porosimetry revealed the structure of the porous composites.     

Phase Formation in the System Na2O · Al2O3-CaO · A12O3-Al2O3 at 1200°C in Air

Phase relations in the system Na₂O_· Al₂O₃-CaO· Al₂O₃-Al₂O₃ at 1200°C in air were determined using the quenching method and high-temperature X-ray diffraction. The compound 2Na₂O · 3CaO · 5Al₂O₃, known from the literature, was reformulated as Na₂O · CaO · 2Al₂O₃. A new compound with the probable composition Na₂O · 3CaO · 8Al₂O₃ was found. Cell parameters of both compounds were determined. The compound Na₂O · CaO-2Al₂O₃ is tetragonal with a = 1.04348(24) and c = 0.72539(31) nm; it forms solid solutions with Na₂O · Al₂O₃ up to 38 mol% Na₂O at 1200°C. The compound Na₂O · 3CaO · 8Al₂O₃ is hexagonal with) a = 0.98436(4) and c = 0.69415(4) nm. The compound CaO · 6Al₂O₃ is not initially formed from oxide components at 1200°C but behaves as an equilibrium phase when it is formed separately at higher temperatures. The very slow transformation kinetics between β and β "-Al₂O₃ make it very difficult to determine equilibrium phase relations in the high-Al₂O₃ part of the diagram. Conclusions as to lifetime processes in high-pressure sodium discharge lamps can be drawn from the phase diagram.     

Sintering and Crystallization of CaO–Al2O3–ZrO2–SiO2 Glasses Containing Different Amount of Al2O3

In this work several complementary techniques have been employed to carefully characterize the sintering and crystallization behavior of CaO–Al₂O₃–ZrO₂–SiO₂ glass powder compacts after different heat treatments. The research started from a new base glass 33.69 CaO–1.00 Al₂O₃–7.68 ZrO₂–55.43SiO₂ (mol%) to which 5 and 10 mol% Al₂O₃ were added. The glasses with higher amounts of alumina sintered at higher temperatures (953°C [lower amount] vs. 987°C [higher amount]). A combination of the linear shrinkage and viscosity data allowed to easily find the viscosity values corresponding to the beginning and the end of the sintering process. Anorthite and wollastonite crystals formed in the sintered samples, especially at lower temperatures. At higher temperatures, a new crystalline phase containing ZrO₂ (2CaO·4SiO₂·ZrO₂) appeared in all studied specimens.     

Phase Equilibrium Relationships in a Portion of the System MgO–Al2O3–2CaO·SiO2

The system MgO–Al₂O₃–2CaO·SiO₂ comprises a plane through the tetrahedron CaO–MgO–Al₂O₃–SiO₂. A total of 108 compositions were prepared having an alumina content below the line joining 2CaO·Al₂O₃SiO₂ (gehlenite) and MgO·Al₂O₃ (spinel). Quenching experiments were carried out on 96 of these compositions at temperatures up to 1590°C. Three binary eutectic systems and two ternary eutectic systems are described. Compositions on this plane are of significance in an investigation of the constitution of basic refractory clinkers made from Canadian dolomitic magnesites. They also concern the compositions of certain blast furnace slags.     

The System CaO-Al2O3-P2O5-H2O at 200°C

The phase relations were established experimentally for the system CaO-Al₂O₃-P₂O₅-H₂O at 200°C and 1710 kPa. The quaternary compound, crandallite, CaAl₃(PO₄)₂(OH)₅· H₂O, was found to be stable. Compatibility joins in the system were determined. The phase relations are presented on the isothermal-isobaric 90 wt% water plane and by projecting the primary fields of the liquidus surface onto the same plane.     

Spectroscopic Properties of Er3+-Doped Na2O–La2O3–Al2O3–SiO2 Glasses

Er³⁺-doped sodium lanthanum aluminosilicate glasses with compositions of (90− x )(0.7SiO₂·0.3Al₂O₃)· x Na₂O·8.2La₂O₃· 0.6Er₂O₃·0.2Yb₂O₃·1Sb₂O₃ (in mol%) ( x = 12, 20, 24, 40, 60 mol%) were prepared and their spectroscopic properties were investigated. Judd–Ofelt analysis was used to calculate spectroscopic properties of all glasses. The Judd–Ofelt intensity parameter Ω _t ( t = 2, 4, 6) decreases with increasing Na₂O. Ω₂ decreases rapidly with increasing Na₂O while Ω₄ and Ω₆ decrease slowly. Both the fluorescent lifetime and the radiative transition rate increase with increasing Na₂O. Fluorescence spectra of the ⁴ I _13/2 to ⁴ I _15/2 transition have been measured and the change with Na₂O content is discussed. It is found that the full width at half-maximum decreases with increasing Na₂O.     

Growth of α-Al2O3 Crystals by Na2O Evaporation

A technique for growing α-Al₂O₃ crystals is described in which Na₂O·11Al₂O₃ is dissolved in a liquid of composition Na₂O·4TiO₂·3Al₂O₃. Alpha Al₂O₃ is precipitated as Na₂O evaporates from the system; Na₂O·11Al₂O₃ serves as a source of Al₂O₃, and Na₂O in the liquid. The content of solids in the mixture is always such that it does not melt completely. The size of the α-Al₂O₃ crystals grown is related to the Na₂O content of the composition. Crystals as large as 4000 by 3000 μm in the α-axis direction and 500 μm in the c -axis direction have been grown.     

The Al2O3-Nd2O3 Phase Diagram

A tentative phase diagram for the system Al₂0₃-Nd₂O₃ is presented. Three compounds were obtained: a β -A1₂O₃-type compound, the perovskite NdAlO₃, and Nd₄Al₂O₉. The perovskite melts congruently (mp 2090°C), and the two other compounds exhibit incongruent melting behavior: β -Nd/Al₂O₃, mp 1900°C; Nd₄Al₂O₉, mp 1905°C. Two eutectics exist with the following compositions and melting points: 80 mol% Al₂O₃, 1750°C; 23 mol% Al₂O₃,1800°C. Nd₄Al₂O9 decomposes in the solid state at 1780°C.     

Chemical Vapor Deposition of Polycrystalline Al2O3

Polycrystalline Al₂O₃ was chemically vapor-deposited onto sintered Al₂O₃ substrates by reaction of AlCl₃ with (1) H₂O, (2) CO:H₂, and (3) O₂ at 1000° and 1500°C and 0.5 and 5.0 torr. Although the thermodynamics of all these reactions predict the formation of solid Al₂O₃, the deposition rate of the first reaction was considerably greater than that of the second. The third reaction was so slow that no measurable deposit was formed in 6 h at 1500°C. Formation of dense deposits of α-Al₂O₃ was favored by increasing temperature and decreasing pressure. Microstructural examination of the dense deposits showed long columnar grains, the largest of which extended through the deposit from the substrate to the surface.     

Crystallization of Li2O · Al2O3· 6SiO2 Glasses Containing Niobium Pentoxide as Nucleating Dopant

Niobium pentoxide (T form, orthorhombic system) was utilized to promote devitrification in Li₂O · Al₂O₃· 6SiO₂ glasses. Two or more mole percentage of this nucleating dopant enhanced crystallization in these glasses. Glasses containing 4.0 and 8.0 mol% T-Nb₂O₅ exhibited a high tendency to form dispersed TT-Nb₂O₅ (monoclinic system) precipitates during the glass quenching process. The crystallization process in glasses containing 2.0 or 4.0 mol% T-Nb₂O₅ occurred as microphase separation, followed by the formation of dispersed TT-Nb₂O₅ crystalline precipitates (760°C), followed by β-quartz solid-solution ( ss ) formation (850° to 900°C) heterogeneously nucleated from the precipitates. β-quartz( ss ) transformed to β-spodumene( ss ), along with a polymorphic transition from the TT-Nb₂O₅ to M-Nb₂O₅ (tetragonal system) crystalline phase.