Organometal Halide Perovskite Quantum Dot Light‐Emitting Diodes

Organometal halide perovskites quantum dots (OHP‐QDs) with bright, color‐tunable, and narrow‐band photoluminescence have significant advantages in display, lighting, and laser applications. Due to sparse concentrations and difficulties in the enrichment of OHP‐QDs, production of large‐area uniform films of OHP‐QDs is a challenging task, which largely impedes their use in electroluminescence devices. Here, a simple dip‐coating method has been reported to effectively fabricate large‐area uniform films of OHP‐QDs. Using this technique, multicolor OHP‐QDs light‐emitting diodes (OQ‐LEDs) emitting in blue, blue‐green, green, orange, and red color have been successfully produced by simply tuning the halide composition or size of QDs. The blue, green, and red OQ‐LEDs exhibited, respectively, a maximum luminance of 2673, 2398, and 986 cd m^?2 at a current efficiency of 4.01, 3.72, and 1.52 cd A^?1, and an external quantum efficiency of 1.38%, 1.06%, and 0.53%, which are much better than most LEDs based on OHP films. The packaged OQ‐LEDs show long‐term stability in air (humidity ≈50%) for at least 7 d. The results demonstrate the great potential of the dip‐coating method to fabricate large‐area uniform films for various QDs. The high‐efficiency OQ‐LEDs also demonstrate the promising potential of OHP‐QDs for low‐cost display, lighting, and optical communication applications.     

Engineering Perovskite Nanocrystal Surface Termination for Light‐Emitting Diodes with External Quantum Efficiency Exceeding 15%

Hybrid organic–inorganic metal halide perovskites are particularly promising for light‐emitting diodes (LEDs) due to their attractive optoelectronic properties such as wavelength tunability, narrow emission linewidth, defect tolerance, and high charge carrier mobility. However, the undercoordinated Pb and halide at the perovskite nanocrystal (NC) surface causes traps and nonradiative recombination. In this work, the external quantum efficiency of iodide‐based perovskite LEDs is boosted to greater than 15%, with an emission wavelength at 750 nm, by engineering the perovskite NC surface stoichiometry and chemical structure of bulky organoammonium ligands. To the stoichiometric precursor solution for the 3D bulk perovskite, 20% molar ratio of methylammonium iodide is added in addition to 20% excess bulky organoammonium iodide to ensure that the NC surface is organoammonium terminated as the crystal size is decreased to 5–10 nm. This combination ensures minimal undercoordinated Pb and halide on the surface, avoids 2D phases, and acts to provide nanosized perovskite grains which allow for smooth and pinhole‐free films. As a result of time‐resolved photoluminescence (PL) and PL quantum yield measurements, it is possible to demonstrate that this surface modification increases the radiative recombination rate while reducing the nonradiative rate.     

Efficient Perovskite Light‐Emitting Diodes Using Polycrystalline Core–Shell‐Mimicked Nanograins

Making small nanograins in polycrystalline organic–inorganic halide perovskite (OIHP) films is critical to improving the luminescent efficiency in perovskite light‐emitting diodes (PeLEDs). 3D polycrystalline OIHPs have fundamental limitations related to exciton binding energy and exciton diffusion length. At the same time, passivating the defects at the grain boundaries is also critical when the grain size becomes smaller. Molecular additives can be incorporated to shield the nanograins to suppress defects at grain boundaries; however, unevenly distributed molecular additives can cause imbalanced charge distribution and inefficient local defect passivation in polycrystalline OIHP films. Here, a kinetically controlled polycrystalline organic‐shielded nanograin (OSN) film with a uniformly distributed organic semiconducting additive (2,2′,2′′‐(1,3,5‐benzinetriyl)‐tris(1‐phenyl‐1‐H‐benzimidazole), TPBI) is developed mimicking core–shell nanoparticles. The OSN film causes improved photophysical and electroluminescent properties with improved light out‐coupling by possessing a low refractive index. Finally, highly improved electroluminescent efficiencies of 21.81% ph el^?1 and 87.35 cd A^?1 are achieved with a half‐sphere lens and four‐time increased half‐lifetime in polycrystalline PeLEDs. This strategy to make homogeneous, defect‐healed polycrystalline core–shell‐mimicked nanograin film with better optical out‐coupling will provide a simple and efficient way to make highly efficient perovskite polycrystal films and their optoelectronics devices.     

Low Roll‐Off Perovskite Quantum Dot Light‐Emitting Diodes Achieved by Augmenting Hole Mobility

The external quantum efficiencies (EQEs) of perovskite quantum dot light‐emitting diodes (QD‐LEDs) are close to the out‐coupling efficiency limitation. However, these high‐performance QD‐LEDs still suffer from a serious issue of efficiency roll‐off at high current density. More injected carriers produce photons less efficiently, strongly suggesting the variation of ratio between radiative and non‐radiative recombination. An approach is proposed to balance the carrier distribution and achieve high EQE at high current density. The average interdot distance between QDs is reduced and this facilitates carrier transport in QD films and thus electrons and holes have a balanced distribution in QD layers. Such encouraging results augment the proportion of radiative recombination, make devices with peak EQE of 12.7%, and present a great device performance at high current density with an EQE roll‐off of 11% at 500 mA cm^?2 (the lowest roll‐off known so far) where the EQE is still over 11%.     

Organic–Inorganic Perovskite Light‐Emitting Electrochemical Cells with a Large Capacitance

While perovskite light‐emitting diodes typically made with high work function anodes and low work function cathodes have recently gained intense interests. Perovskite light‐emitting devices with two high work function electrodes with interesting features are demonstrated here. Firstly, electroluminescence can be easily obtained from both forward and reverse biases. Secondly, the results of impedance spectroscopy indicate that the ionic conductivity in the iodide perovskite (CH₃NH₃PbI₃) is large with a value of ≈10^?8 S cm^?1. Thirdly, the shift of the emission spectrum in the mixed halide perovskite (CH₃NH₃PbI_3?xBr_x) light‐emitting devices indicates that I^? ions are mobile in the perovskites. Fourthly, this work shows that the accumulated ions at the interfaces result in a large capacitance (≈100 μF cm^?2). The above results conclusively prove that the organic–inorganic halide perovskites are solid electrolytes with mixed ionic and electronic conductivity and the light‐emitting device is a light‐emitting electrochemical cell. The work also suggests that the organic–inorganic halide perovskites are potential energy‐storage materials, which may be applicable in the field of solid‐state supercapacitors and batteries.     

Highly Efficient,Bright, and Stable Colloidal Quantum Dot Short‐Wave Infrared Light‐Emitting Diodes

Unbalanced charge injection is deleterious for the performance of colloidal quantum dot (CQD) light‐emitting diodes (LEDs) as it deteriorates the quantum efficiency, brightness, and operational lifetime. CQD LEDs emitting in the infrared have previously achieved high quantum efficiencies but only when driven to emit in the low‐radiance regime. At higher radiance levels, required for practical applications, the efficiency decreased dramatically in view of the notorious efficiency droop. Here, a novel methodology is reported to regulate charge supply in multinary bandgap CQD composites that facilitates improved charge balance. The current approach is based on engineering the energetic potential landscape at the supra‐nanocrystalline level that has allowed to report short‐wave infrared PbS CQD LEDs with record‐high external quantum efficiency in excess of 8%, most importantly, at a radiance level of ≈5 W sr^?1 m², an order of magnitude higher than prior reports. Furthermore, the balanced charge injection and Auger recombination reduction has led to unprecedentedly high operational stability with radiance half‐life of 26 068 h at a radiance of 1 W sr^?1 m^?2.     

Stoichiometry Control for the Tuning of Grain Passivation and Domain Distribution in Green Quasi‐2D Metal Halide Perovskite Films and Light‐Emitting Diodes

Quasi‐2D metal halide perovskite films are promising for efficient light‐emitting diodes (LEDs), because of their efficient radiative recombination and suppressed trap‐assisted quenching compared with pure 3D perovskites. However, because of the multidomain polycrystalline nature of solution‐processed quasi‐2D perovskite films, the composition engineering always impacts the emitting properties with complicated mechanisms. Here, defect passivation and domain distribution of quasi‐2D perovskite films prepared with various precursor compositions are systematically studied. As a result, in perovskite films prepared from stoichiometric quasi‐2D precursor compositions, large organic ammonium cations function well as passivators. In comparison, precursor compositions of simply adding large organic halide salt into a 3D perovskite precursor ensure not only the defect passivation but also the effective formation of quasi‐2D perovskite domains, avoiding unfavorable appearance of low‐order domains. Quasi‐2D perovskite films fabricated with a well‐designed precursor composition achieve a high photoluminescence quantum yield of 95.3% and an external quantum efficiency of 14.7% in LEDs.     

Optically‐Pumped Lasing in Hybrid Organic–Inorganic Light‐Emitting Diodes

Here, the use of metal oxide layers both for charge transport and injection into an emissive semiconducting polymer and also for the control of the in‐plane waveguided optical modes in light‐emitting diodes (LEDs) is reported. The high refractive index of zinc oxide is used to confine these modes away from the absorbing electrodes, and include a nano‐imprinted grating in the polymer layer to introduce distributed feedback and enhance optical out‐coupling. These structures show a large increase in the luminescence efficiency over conventional devices, with photoluminescence efficiency increased by up to 45%. Furthermore, optically‐pumped lasing in hybrid oxide polymer LEDs is demonstrated. A tuneable lasing emission is also obtained in a single device structure by employing a graduated thickness of a zinc oxide inter‐layer. This demonstrates the scope for using such architectures to improve the external efficiency of organic semiconductor LEDs, and opens new possibilities for the realization of polymer injection lasers.     

Dual Passivation of Perovskite Defects for Light‐Emitting Diodes with External Quantum Efficiency Exceeding 20%

Solution‐processed metal halide perovskites (MHPs) have attracted much attention for applications in light‐emitting diodes (LEDs) due to their wide color gamut, high color purity, tunable emission wavelength, balanced electron/hole transportation, etc. Although MHPs are very tolerant to defects, the defects in solution‐processed perovskite LEDs (PeLEDs) still cause severe nonradiative recombination and device instability. Here, molecular design of additives for dual passivation of both lead and halide defects in perovskites is reported. A bi‐functional additive, 4‐fluorophenylmethylammonium‐trifluoroacetate (FPMATFA), is synthesized by using a simple solution process. The TFA anions and FPMA cations can bond with undercoordinated lead and halide ions, respectively, resulting in dual passivation of both lead and halide defects. In addition, the bulky FPMA group can constrain the grain growth of 3D perovskite, enhancing electron–hole capture rates and radiative recombination rates. As a result, high‐performance PeLEDs with a peak external quantum efficiency reaching 20.9% and emission wavelength at 694 nm are achieved using formamidinium‐cesium lead iodide‐bromide (FA_0.33Cs_0.67Pb(I_0.7Br_0.3)₃). Furthermore, the operational lifetime of PeLEDs is also greatly improved due to the low trap density in the perovskite film.     

2D Ruddlesden–Popper Perovskite Nanoplate Based Deep‐Blue Light‐Emitting Diodes for Light Communication

Ruddlesden–Popper perovskite, (PEA)₂PbBr₄ (PEA = C₈H₉NH₃), is a steady and inexpensive material with a broad bandgap and a narrow‐band emission. These features make it a potential candidate for deep‐blue light‐emitting diodes (LEDs). However, due to the weak exciton binding energy, LEDs based on the perovskite thin films usually possess a very low external quantum efficiency (EQE) of <0.03%. Here, for the first time, the construction of high‐performance deep‐blue LEDs based on 2D (PEA)₂PbBr₄ nanoplates (NPs) is demonstrated. The as‐fabricated (PEA)₂PbBr₄ NPs film shows a deep‐blue emission at 410 nm with excellent stability under ambient conditions. Impressively, LEDs based on the (PEA)₂PbBr₄ NPs film deliver a bright deep‐blue emission with a maximum luminance of 147.6 cd m^?2 and a high EQE up to 0.31%, which represents the most efficient and brightest perovskite LEDs operating at deep‐blue wavelengths. Furthermore, the LEDs retain over 80% of their efficiencies for over 1350 min under ≈60% relative humidity. The steady and bright deep‐blue LEDs can be used as an excitation light source to realize white light emission, which shows the potential for light communication. The work provides scope for developing perovskite into efficient and deep‐blue LEDs for low‐cost light source and light communication.     

Light Extraction Efficiency Enhancement of Colloidal Quantum Dot Light‐Emitting Diodes Using Large‐Scale Nanopillar Arrays

A colloidal quantum dot light‐emitting diode (QLED) is reported with substantially enhanced light extraction efficiency by applying a layer of large‐scale, low‐cost, periodic nanopillar arrays. Zinc oxide nanopillars are grown on the glass surface of the substrate using a simple, efficient method of non‐wetting templates. With the layer of ZnO nanopillar array as an optical outcoupling medium, a record high current efficiency (CE) of 26.6 cd/A is achieved for QLEDs. Consequently, the corresponding external quantum efficiency (EQE) of 9.34% reaches the highest EQE value for green‐emitting QLEDs. Also, the underlying physical mechanisms enabling the enhanced light‐extraction are investigated, which leads to an excellent agreement of the numerical results based on the mode theory with the experimental measurements. This study is the first account for QLEDs offering detailed insight into the light extraction efficiency enhancement of QLED devices. The method demonstrated here is intended to be useful not only for opening up a ubiquitous strategy for designing high‐performance QLEDs but also with respect to fundamental research on the light extraction in QLEDs.     

Localized Surface Plasmon Enhanced All‐Inorganic Perovskite Quantum Dot Light‐Emitting Diodes Based on Coaxial Core/Shell Heterojunction Architecture

This work presents a strategy of combining the concepts of localized surface plasmons (LSPs) and core/shell nanostructure configuration in a single perovskite light‐emitting diode (PeLED) to addresses simultaneously the emission efficiency and stability issues facing current PeLEDs' challenges. Wide bandgap n‐ZnO nanowires and p‐NiO are employed as the carrier injectors, and also the bottom/upper protection layers to construct coaxial core/shell heterostructured CsPbBr₃ quantum dots LEDs. Through embedding plasmonic Au nanoparticles into the device and thickness optimization of the MgZnO spacer layer, an emission enhancement ratio of 1.55 is achieved. The best‐performing plasmonic PeLED reaches up a luminance of 10 206 cd m^?2, an external quantum efficiency of ≈4.626%, and a current efficiency of 8.736 cd A^?1. The underlying mechanisms for electroluminescence enhancement are associated with the increased spontaneous emission rate and improved internal quantum efficiency induced by exciton–LSP coupling. More importantly, the proposed PeLEDs, even without encapsulation, present a substantially improved operation stability against water and oxygen degradation (30‐day storage in air ambient, 85% humidity) compared with any previous reports. It is believed that the experimental results obtained will provide an effective strategy to enhance the performance of PeLEDs, which may push forward the application of such kind of LEDs.     

Energy Level Modification with Carbon Dot Interlayers Enables Efficient Perovskite Solar Cells and Quantum Dot Based Light‐Emitting Diodes

Controlling the transport and minimizing charge carrier trapping at interfaces is crucial for the performance of various optoelectronic devices. Here, how electronic properties of stable, abundant, and easy‐to‐synthesized carbon dots (CDs) are controlled via the surface chemistry through a chosen ratio of their precursors citric acid and ethylenediamine are demonstrated. This allows to adjust the work function of indium tin oxide (ITO) films over the broad range of 1.57 eV, through deposition of thin CD layers. CD modifiers with abundant amine groups reduce the ITO work function from 4.64 to 3.42 eV, while those with abundant carboxyl groups increase it to 4.99 eV. Using CDs to modify interfaces between metal oxide (SnO₂ and ZnO) films and active layers of solar cells and light‐emitting diodes (LEDs) allows to significantly improve their performance. Power conversion efficiency of CH₃NH₃PbI₃ perovskite solar cells increases from 17.3% to 19.5%; the external quantum efficiency of CsPbI₃ perovskite quantum dot LEDs increases from 4.8% to 10.3%; and that of CdSe/ZnS quantum dot LEDs increases from 8.1% to 21.9%. As CD films are easily fabricated in air by solution processing, the approach paves the way to a simplified manufacturing of large‐area and low‐cost optoelectronic devices.     

High‐Performance Quantum‐Dot Light‐Emitting Diodes Using NiOx Hole‐Injection Layers with a High and Stable Work Function

Solution‐processed oxide thin films are actively pursued as hole‐injection layers (HILs) in quantum‐dot light‐emitting diodes (QLEDs), aiming to improve operational stability. However, device performance is largely limited by inefficient hole injection at the interfaces of the oxide HILs and high‐ionization‐potential organic hole‐transporting layers. Solution‐processed NiO_x films with a high and stable work function of ≈5.7 eV achieved by a simple and facile surface‐modification strategy are presented. QLEDs based on the surface‐modified NiO_x HILs show driving voltages of 2.1 and 3.3 V to reach 1000 and 10 000 cd m^?2, respectively, both of which are the lowest among all solution‐processed LEDs and vacuum‐deposited OLEDs. The device exhibits a T₉₅ operational lifetime of ≈2500 h at an initial brightness of 1000 cd m^?2, meeting the commercialization requirements for display applications. The results highlight the potential of solution‐processed oxide HILs for achieving efficient‐driven and long‐lifetime QLEDs.     

Scalable All‐Evaporation Fabrication of Efficient Light‐Emitting Diodes with Hybrid 2D–3D Perovskite Nanostructures

Quasi‐2D (Q2D) lead halide perovskites have emerged as promising materials for light‐emitting diodes (LEDs) due to their tunable emission, slowed‐down carrier diffusion, and improved stability. However, they are primarily fabricated through solution methods, which hinders its large‐scale manufacture and practical applications. Physical‐vapor‐deposition (PVD) methods have well demonstrated the capability for reproducible, scalable, and layer‐by‐layer fabrication of high quality organic/inorganic thin films. Herein, for the first time, the full‐evaporation fabrication of organic–inorganic hybrid ((BA)₂Cs_n?1Pb_nBr_3n+1) Q2D–3D PeLEDs is demonstrated. The morphology and crystal phase of the perovskite are controlled from 3D to 2D by modulating material composition, annealing temperature, and film thicknesses. The confinement of carriers in 3D layers and the energy funnel effect are discovered and discussed. Importantly, a record high external quantum efficiency (EQE) of 5.3% based on evaporation method is achieved. Moreover, a centimeter‐scale PeLED (1.5 cm × 2 cm) is obtained. Furthermore, the T₅₀ lifetime of the device with an initial brightness of 100 cd m^?2 is found to be 90 min with a thin layer PMMA passivation, which is among the longest for all PVD processed PeLEDs. Overall, this work casts a solid stepping stone towards the fabrication of high‐performance PeLEDs on a large‐scale.     

Suppressing Ion Migration Enables Stable Perovskite Light‐Emitting Diodes with All‐Inorganic Strategy

Stability issue is one of the major concerns that limit emergent perovskite light‐emitting diodes (PeLEDs) techniques. Generally, ion migration is considered as the most important origin of PeLEDs degradation. In this work, an all‐inorganic device architecture, LiF/perovskite/LiF/ZnS/ZnSe, is proposed to address this imperative problem. The inorganic (Cs_1?xRb_x)_1?yK_yPbBr₃ perovskite is optimized with achieving a photoluminescence quantum yield of 67%. Depth profile analysis of X‐ray photoelectron spectroscopy indicates that the LiF/perovskite/LiF structure and the ZnS/ZnSe cascade electron transport layers significantly suppress the electric‐field‐induced ion migrations of the perovskite layers, and impede the diffusion of metallic atoms from cathode into perovskites. The as‐prepared PeLEDs display excellent shelf stability (maintaining 90% of the initial external quantum efficiency [EQE] after 264 h) and operational stability (half‐lifetime of about 255 h at an initial luminance of 120 cd m^?2). The devices also exhibit a maximum brightness of 15 6155 cd m^?2 and an EQE of 11.05%.     

Recent Progress in High‐Efficiency Blue‐Light‐Emitting Materials for Organic Light‐Emitting Diodes

Organic light‐emitting diodes (OLEDs) are increasingly used in displays replacing traditional flat panel displays; e.g., liquid crystal displays. Especially, the paradigm shifts in displays from rigid to flexible types accelerated the market change from liquid crystal displays to OLEDs. However, some critical issues must be resolved for expansion of OLED use, of which blue device performance is one of the most important. Therefore, recent OLED material development has focused on the design, synthesis and application of high‐efficiency and long‐life blue emitters. Well‐known blue fluorescent emitters have been modified to improve their efficiency and lifetime, and blue phosphorescent emitters are being investigated to overcome the lifetime issue. Recently, thermally activated delayed fluorescent emitters have received attention due to the potential of high‐efficiency and long‐living emitters. Therefore, it is timely to review the recent progress and future prospects of high‐efficiency blue emitters. In this feature article, we summarize recent developments in blue fluorescent, phosphorescent and thermally activated delayed fluorescent emitters, and suggest key issues for each emitter and future development strategies.     

Co‐Interlayer Engineering toward Efficient Green Quasi‐Two‐Dimensional Perovskite Light‐Emitting Diodes

With respect to three‐dimensional (3D) perovskites, quasi‐two‐dimensional (quasi‐2D) perovskites have unique advantages in light‐emitting devices (LEDs), such as strong exciton binding energy and good phase stability. Interlayer ligand engineering is a key issue to endow them with these properties. Rational design principles for interlayer materials and their processing techniques remain open to investigation. A co‐interlayer engineering strategy is developed to give efficient quasi‐2D perovskites by employing phenylbutylammonium bromide (PBABr) and propylammonium bromide (PABr) as the ligand materials. Preparation of these co‐interlayer quasi‐2D perovskite films is simple and highly controllable without using antisolvent treatment. Crystallization and morphology are readily manipulated by tuning the ratio of co‐interlayer components. Various optical techniques, including steady and ultrafast transient absorption and photoluminescence spectroscopies, are used to investigate their excitonic properties. Photoluminescence quantum yield (PLQY) of the perovskite film is dramatically improved to 89% due to the combined optimization of exciton binding energy and suppression of trap state formation. Accordingly, a high current efficiency of 66.1 cd A^?1 and an external quantum efficiency of 15.1% are achieved for green co‐interlayer quasi‐2D perovskite LEDs without using any light out‐coupling techniques, indicating that co‐interlayer engineering is a simple and effective approach to develop high‐performance perovskite electroluminescence devices.