Systematic Study of Widely Applicable N‐Doping Strategy for High‐Performance Solution‐Processed Field‐Effect Transistors

A specific design for solution‐processed doping of active semiconducting materials would be a powerful strategy in order to improve device performance in flexible and/or printed electronics. Tetrabutylammonium fluoride and tetrabutylammonium hydroxide contain Lewis base anions, F^? and OH^?, respectively, which are considered as organic dopants for efficient and cost‐effective n‐doping processes both in n‐type organic and nanocarbon‐based semiconductors, such as poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)] (P(NDI2OD‐T2)) and selectively dispersed semiconducting single‐walled carbon nanotubes by π‐conjugated polymers. The dramatic enhancement of electron transport properties in field‐effect transistors is confirmed by the effective electron transfer from the dopants to the semiconductors as well as controllable onset and threshold voltages, convertible charge‐transport polarity, and simultaneously showing excellent device stabilities under ambient air and bias stress conditions. This simple solution‐processed chemical doping approach could facilitate the understanding of both intrinsic and extrinsic charge transport characteristics in organic semiconductors and nanocarbon‐based materials, and is thus widely applicable for developing high‐performance organic and printed electronics and optoelectronics devices.     

High‐Mobility n‐Type Organic Transistors Based on a Crystallized Diketopyrrolopyrrole Derivative

A new high‐performing small molecule n‐channel semiconductor based on diketopyrrolopyrrole (DPP), 2,2′‐(5,5′‐(2,5‐bis(2‐ethylhexyl)‐3,6‐dioxo‐2,3,5,6‐tetrahydropyrrolo[3,4‐c]pyrrole‐1,4‐diyl)bis(thiophene‐5,2‐diyl))bis(methan‐1‐yl‐1‐ylidene)dimalononitrile (DPP‐T‐DCV), is successfully synthesized. The frontier molecular orbitals in this designed structure are elaborately tuned by introducing a strong electron‐accepting functionality (dicyanovinyl). The well‐defined lamellar structures of the crystals display a uniform terrace step height corresponding to a molecular monolayer in the solid‐state. As a result of this tuning and the remarkable crystallinity derived from the conformational planarity, organic field‐effect transistors (OFETs) based on dense‐packed solution‐processed single‐crystals of DPP‐T‐DCV exhibit an electron mobility (μ_e) up to 0.96 cm² V^?1 s^?1, one of the highest values yet obtained for DPP derivative‐based n‐channel OFETs. Polycrystalline OFETs show promise (with an μ_e up to 0.64 cm² V^?1 s^?1) for practical utility in organic device applications.     

A Synergetic Effect of Molecular Weight and Fluorine in All‐Polymer Solar Cells with Enhanced Performance

A synergetic effect of molecular weight (M_n) and fluorine (F) on the performance of all‐polymer solar cells (all‐PSCs) is comprehensively investigated by tuning the M_n of the acceptor polymer poly((N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl)‐alt‐5,5′‐(2,2′‐bithiophene)) (P(NDI2OD‐T2)) and the F content of donor polymer poly(2,3‐bis‐(3‐octyloxyphenyl)quinoxaline‐5,8‐dyl‐alt‐thiophene‐2,5‐diyl). Both M_n and F variations strongly influence the charge transport properties and morphology of the blend films, which have a significant impact on the photovoltaic performance of all‐PSCs. In particular, the effectiveness of high M_n in increasing power conversion efficiency (PCE) can be greatly improved by the devices based on optimum F content, reaching a PCE of 7.31% from the best all‐PSC combination. These findings enable us to further understand the working principles of all‐PSCs with a view on achieving even higher power conversion efficiency in the future.     

Air‐ and Active Hydrogen‐Induced Electron Trapping and Operational Instability in n‐Type Polymer Field‐Effect Transistors

Organic field‐effect transistors (OFETs) have attracted much attention for the next‐generation electronics. Despite of the rapid developments of OFETs, operational stability is a big challenge for their commercial applications. Moreover, the actual mechanism behind the degradation of electron transport is still poorly understood. Here, the electrical characteristics of poly{[N,N‐9‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,59‐(2,29‐bithiophene)} (P(NDI2OD‐T2)) thin‐film transistors (TFTs) as a function of semiconductor/dielectric interfacial property and environment are systematically investigated, in particular, how the copresence of water, oxygen, and active hydrogen on the surface of dielectric leads to a sharp drop‐off in threshold voltage. Evidence is found that an acid–base neutralization reaction occurring at the interface, as a combined effect of the chemical instability of dielectrics and the electrochemical instability of organic semiconductors, contributes to the significant electron trapping on the interface of P(NDI2OD‐T2) TFTs. Two strategies, increasing the intrinsic electrochemical stability of semiconductor and decreasing the chemical reactivity of gate dielectric, are demonstrated to effectively suppress the reaction and thus improve the operational stability of n‐type OFETs. The results provide an alternative degradation pathway to better understand the charge transport instability in n‐type OFETs, which is advantageous to construct high‐performance OFETs with long‐term stability.     

Printed,Flexible, Organic Nano‐Floating‐Gate Memory: Effects of Metal Nanoparticles and Blocking Dielectrics on Memory Characteristics

The effects of using a blocking dielectric layer and metal nanoparticles (NPs) as charge‐trapping sites on the characteristics of organic nano‐floating‐gate memory (NFGM) devices are investigated. High‐performance NFGM devices are fabricated using the n‐type polymer semiconductor, poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)} (P(NDI2OD‐T2)), and various metal NPs. These NPs are embedded within bilayers of various polymer dielectrics (polystyrene (PS)/poly(4‐vinyl phenol) (PVP) and PS/poly(methyl methacrylate) (PMMA)). The P(NDI2OD‐T2) organic field‐effect transistor (OFET)‐based NFGM devices exhibit high electron mobilities (0.4–0.5 cm² V^?1 s^?1) and reliable non‐volatile memory characteristics, which include a wide memory window (≈52 V), a high on/off‐current ratio (I_on/I_off ≈ 10⁵), and a long extrapolated retention time (>10⁷ s), depending on the choice of the blocking dielectric (PVP or PMMA) and the metal (Au, Ag, Cu, or Al) NPs. The best memory characteristics are achieved in the ones fabricated using PMMA and Au or Ag NPs. The NFGM devices with PMMA and spatially well‐distributed Cu NPs show quasi‐permanent retention characteristics. An inkjet‐printed flexible P(NDI2OD‐T2) 256‐bit transistor memory array (16 × 16 transistors) with Au‐NPs on a polyethylene naphthalate substrate is also fabricated. These memory devices in array exhibit a high I_on/I_off (≈10^{4 ± 0.85}), wide memory window (≈43.5 V ± 8.3 V), and a high degree of reliability.     

High‐Performance n‐Channel Thin‐Film Field‐Effect Transistors Based on a Nanowire‐Forming Polymer

A new electrontransport polymer, poly{[N,N′‐dioctylperylene‐3,4,9,10‐bis(dicarboximide)‐1,7(6)‐diyl]‐alt‐[(2,5‐bis(2‐ethyl‐hexyl)‐1,4‐phenylene)bis(ethyn‐2,1‐diyl]} (PDIC8‐EB), is synthesized. In chloroform, the polymer undergoes self‐assembly, forming a nanowire suspension. The nanowire's optical and electrochemical properties, morphological structure, and field‐effect transistor (FET) characteristics are investigated. Thin films fabricated from a PDIC8‐EB nanowire suspension are composed of ordered nanowires and ordered and amorphous non‐nanowire phases, whereas films prepared from a homogeneous PDIC8‐EB solution consist of only the ordered and amorphous non‐nanowire phases. X‐ray scattering experiments suggest that in both nanowires and ordered phases, the PDIC8 units are laterally stacked in an edge‐on manner with respect to the film plane, with full interdigitation of the octyl chains, and with the polymer backbones preferentially oriented within the film plane. The ordering and orientations are significantly enhanced through thermal annealing at 200 °C under inert conditions. The polymer film with high degree of structural ordering and strong orientation yields a high electron mobility (0.10 ± 0.05 cm² V^?1 s^?1), with a high on/off ratio (3.7 × 10⁶), a low threshold voltage (8 V), and negligible hysteresis (0.5 V). This study demonstrates that the polymer in the nanowire suspension provides a suitable material for fabricating the active layers of high‐performance n‐channel FET devices via a solution coating process.     

Very Low Degree of Energetic Disorder as the Origin of High Mobility in an n‐channel Polymer Semiconductor

Charge transport is investigated in high‐mobility n‐channel organic field‐effect transistors (OFETs) based on poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)} (P(NDI2OD‐T2), Polyera ActivInk? N2200) with variable‐temperature electrical measurements and charge‐modulation spectroscopy. Results indicate an unusually uniform energetic landscape of sites for charge‐carrier transport along the channel of the transistor as the main reason for the observed high‐electron mobility. Consistent with a lateral field‐independent transport at temperatures down to 10 K, the reorganization energy is proposed to play an important role in determining the activation energy for the mobility. Quantum chemical calculations, which show an efficient electronic coupling between adjacent units and a reorganization energy of a few hundred meV, are consistent with these findings.     

Kinetically Controlled Crystallization in Conjugated Polymer Films for High‐Performance Organic Field‐Effect Transistors

Ordering of semiconducting polymers in thin films from the nano to microscale is strongly correlated with charge transport properties as well as organic field‐effect transistor performance. This paper reports a method to control nano to microscale ordering of poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)} (P(NDI2OD‐T2)) thin films by precisely regulating the solidification rate from the metastable state just before crystallization. The proposed simple but effective approach, kinetically controlled crystallization, achieves optimized P(NDI2OD‐T2) films with large polymer domains, long range ordered fibrillar structures, and molecular orientation preferable for electron transport leading to dramatic morphological changes in both polymer domain sizes at the micrometer scale and molecular packing structures at nanoscales. Structural changes significantly increase electron mobilities up to 3.43 ± 0.39 cm² V^?1 s^?1 with high reliability, almost two orders of enhancement compared with devices from naturally dried films. Small contact resistance is also obtained for electron injection (0.13 MΩ cm), low activation energy (62.51 meV), and narrow density of states distribution for electron transport in optimized thin films. It is believed that this study offers important insight into the crystallization of conjugated polymers that can be broadly applied to optimize the morphology of semiconducting polymer films for solution processed organic electronic devices.     

Introducing a Nonvolatile N‐Type Dopant Drastically Improves Electron Transport in Polymer and Small‐Molecule Organic Transistors

Molecular doping is a powerful yet challenging technique for enhancing charge transport in organic semiconductors (OSCs). While there is a wealth of research on p‐type dopants, work on their n‐type counterparts is comparatively limited. Here, reported is the previously unexplored n‐dopant (12a,18a)‐5,6,12,12a,13,18,18a,19‐octahydro‐5,6‐dimethyl‐ 13,18[1′,2′]‐benzenobisbenzimidazo [1,2‐b:2′,1′‐d]benzo[i][2.5]benzodiazo‐cine potassium triflate adduct (DMBI‐BDZC) and its application in organic thin‐film transistors (OTFTs). Two different high electron mobility OSCs, namely, the polymer poly[[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐ bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2′‐bithiophene)] and a small‐molecule naphthalene diimides fused with 2‐(1,3‐dithiol‐2‐ylidene)malononitrile groups (NDI‐DTYM2) are used to study the effectiveness of DMBI‐BDZC as a n‐dopant. N‐doping of both semiconductors results in OTFTs with improved electron mobility (up to 1.1 cm² V^?1 s^?1), reduced threshold voltage and lower contact resistance. The impact of DMBI‐BDZC incorporation is particularly evident in the temperature dependence of the electron transport, where a significant reduction in the activation energy due to trap deactivation is observed. Electron paramagnetic resonance measurements support the n‐doping activity of DMBI‐BDZC in both semiconductors. This finding is corroborated by density functional theory calculations, which highlights ground‐state electron transfer as the main doping mechanism. The work highlights DMBI‐BDZC as a promising n‐type molecular dopant for OSCs and its application in OTFTs, solar cells, photodetectors, and thermoelectrics.     

High‐Performance Top‐Gated Organic Field‐Effect Transistor Memory using Electrets for Monolithic Printed Flexible NAND Flash Memory

High‐performance top‐gated organic field‐effect transistor (OFET) memory devices using electrets and their applications to flexible printed organic NAND flash are reported. The OFETs based on an inkjet‐printed p‐type polymer semiconductor with efficiently chargeable dielectric poly(2‐vinylnaphthalene) (PVN) and high‐k blocking gate dielectric poly(vinylidenefluoride‐trifluoroethylene) (P(VDF‐TrFE)) shows excellent non‐volatile memory characteristics. The superior memory characteristics originate mainly from reversible charge trapping and detrapping in the PVN electret layer efficiently in low‐k/high‐k bilayered dielectrics. A strategy is devised for the successful development of monolithically inkjet‐printed flexible organic NAND flash memory through the proper selection of the polymer electrets (PVN or PS), where PVN/‐ and PS/P(VDF‐TrFE) devices are used as non‐volatile memory cells and ground‐ and bit‐line select transistors, respectively. Electrical simulations reveal that the flexible printed organic NAND flash can be possible to program, read, and erase all memory cells in the memory array repeatedly without affecting the non‐selected memory cells.     

Non‐volatile Ferroelectric Poly(vinylidene fluoride‐co‐trifluoroethylene) Memory Based on a Single‐Crystalline Tri‐isopropylsilylethynyl Pentacene Field‐Effect Transistor

A new type of nonvolatile ferroelectric poly(vinylidene fluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)) memory based on an organic thin‐film transistor (OTFT) with a single crystal of tri‐isopropylsilylethynyl pentacene (TIPS‐PEN) as the active layer is developed. A bottom‐gate OTFT is fabricated with a thin P(VDF‐TrFE) film gate insulator on which a one‐dimensional ribbon‐type TIPS‐PEN single crystal, grown via a solvent‐exchange method, is positioned between the Au source and drain electrodes. Post‐thermal treatment optimizes the interface between the flat, single‐crystalline ab plane of TIPS‐PEN and the polycrystalline P(VDF‐TrFE) surface with characteristic needle‐like crystalline lamellae. As a consequence, the memory device exhibits a substantially stable source–drain current modulation with an ON/OFF ratio hysteresis greater than 10³, which is superior to a ferroelectric P(VDF‐TrFE) OTFT that has a vacuum‐evaporated pentacene layer. Data retention longer than 5 × 10⁴ s is additionally achieved in ambient conditions by incorporating an interlayer between the gate electrode and P(VDF‐TrFE) thin film. The device is environmentally stable for more than 40 days without additional passivation. The deposition of a seed solution of TIPS‐PEN on the chemically micropatterned surface allows fabrication arrays of TIPS‐PEN single crystals that can be potentially useful for integrated arrays of ferroelectric polymeric TFT memory.     

High Performance Multi‐Level Non‐Volatile Polymer Memory with Solution‐Blended Ferroelectric Polymer/High‐k Insulators for Low Voltage Operation

Polymer ferroelectric‐gate field effect transistors (Fe‐FETs) employing ferroelectric polymer thin films as gate insulators are highly attractive as a next‐generation non‐volatile memory. Furthermore, polymer Fe‐FETs have been recently of interest owing to their capability of storing data in more than 2 states in a single device, that is, they have multi‐level cell (MLC) operation potential for high density data storage. However, among a variety of technological issues of MLC polymer Fe‐FETs, the requirement of high voltage for cell operation is one of the most urgent problems. Here, a low voltage operating MLC polymer Fe‐FET memory with a high dielectric constant (k) ferroelectric polymer insulator is presented. Effective enhancement of capacitance of the ferroelectric gate insulator layer is achieved by a simple binary solution‐blend of a ferroelectric poly(vinylidene fluoride‐co‐trifluoroethylene) (PVDF‐TrFE) (k ≈ 8) with a relaxer high‐k poly(vinylidene‐fluoride–trifluoroethylene–chlorotrifluoroethylene) (PVDF‐TrFE‐CTFE) (k ≈ 18). At optimized conditions, a ferroelectric insulator with a PVDF‐TrFE/PVDF‐TrFE‐CTFE (10/5) blend composition enables the discrete six‐level multi‐state operation of a MLC Fe‐FET at a gate voltage sweep of ±18 V with excellent data retention and endurance of each state of more than 10⁴ s and 120 cycles, respectively.     

Effect of Doping Concentration on Microstructure of Conjugated Polymers and Characteristics in N‐Type Polymer Field‐Effect Transistors

Despite extensive progress in organic field‐effect transistors, there are still far fewer reliable, high‐mobility n‐type polymers than p‐type polymers. It is demonstrated that by using dopants at a critical doping molar ratio (MR), performance of n‐type polymer poly[[N,N9‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,59‐(2,29‐bithiophene)] (P(NDI2DO‐T2)) field‐effect transistors (FETs) can be significantly improved and simultaneously optimized in mobility, on–off ratio, crystallinity, injection, and reliability. In particular, when using the organic dopant bis(cyclopentadienyl)–cobalt(II) (cobaltocene, CoCp₂) at a low concentration (0.05 wt%), the FET mobility is increased from 0.34 to 0.72 cm² V^–1 s^–1, and the threshold voltage was decreased from 32.7 to 8.8 V. The relationship between the MR of dopants and electrical characteristics as well as the evolution in polymer crystallinity revealed by synchrotron X‐ray diffractions are systematically investigated. Deviating from previous discoveries, it is found that mobility increases first and then decreases drastically beyond a critical value of MR. Meanwhile, the intensity and width of the main peak of in‐plane X‐ray diffraction start to decrease at the same critical MR. Thus, the mobility decrease is correlated with the disturbed in‐plane crystallinity of the conjugated polymer, for both organic and inorganic dopants. The method provides a simple and efficient approach to employing dopants to optimize the electrical performance and microstructure of P(NDI2DO‐T2).     

Synthesis,Electronic Structure,and Charge Transport Characteristics of Naphthalenediimide‐Based Co‐Polymers with Different Oligothiophene Donor Units

Naphthalenediimide (NDI)‐based polymers co‐polymerized with thienyl units are an interesting class of polymer semiconductors because of their good electron mobilities and unique film microstructure. Despite these properties, understanding how the extension of the thienyl co‐monomer affects charge transport properties remains unclear. With this goal in mind, we have synthesized a series of NDI derivatives of the parent poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene) (P(NDI2OD‐T2)), which exhibited excellent electron mobility. The strategy comprises both the extension of the donor o‐conjugation length and the heteroatomic fusion of the thiophene rings. These newly synthesized compounds are characterized experimentally and theoretically vis‐à‐vis with P(NDI2OD‐T2) as the reference. UV‐vis data and cyclic‐voltammetry are adopted to assess the effect of the donor modification on the frontier energy levels and on the bandgap. Intra‐molecular polaronic effects are accounted for by computing the internal reorganization energy with density functional theory (DFT) calculations. Finally electrons and holes transport is experimentally investigated in field‐effect transistors (FETs), by measuring current‐voltage characteristics at variable temperatures. Overall we have identified a regime where inter‐molecular effects, such as the wavefunction overlap and the degree of energetic disorder, induced by the different donor group prevail over polaronic effects and are the leading factors in determining electrons mobility.     

Doping Dependent In‐Plane and Cross‐Plane Thermoelectric Performance of Thin n‐Type Polymer P(NDI2OD‐T2) Films

Thermoelectric generators pose a promising approach in renewable energies as they can convert waste heat into electricity. In order to build high efficiency devices, suitable thermoelectric materials, both n‐ and p‐type, are needed. Here, the n‐type high‐mobility polymer poly[N,N′‐bis(2‐octyldodecyl)naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene) (P(NDI2OD‐T2)) is focused upon. Via solution doping with 4‐(1,3‐dimethyl‐2,3‐dihydro‐1H‐benzoimidazol‐2‐yl)‐N,N‐diphenylaniline (N‐DPBI), a maximum power factor of (1.84 ± 0.13) µW K^?2 m^?1 is achieved in an in‐plane geometry for 5 wt% dopant concentration. Additionally, UV–vis spectroscopy and grazing‐incidence wide‐angle X‐ray scattering are applied to elucidate the mechanisms of the doping process and to explain the discrepancy in thermoelectric performance depending on the charge carriers being either transported in‐plane or cross‐plane. Morphological changes are found such that the crystallites, built‐up by extended polymer chains interacting via lamellar and π–π stacking, re‐arrange from face‐ to edge‐on orientation upon doping. At high doping concentrations, dopant molecules disturb the crystallinity of the polymer, hindering charge transport and leading to a decreased power factor at high dopant concentrations. These observations explain why an intermediate doping concentration of N‐DPBI leads to an optimized thermoelectric performance of P(NDI2OD‐T2) in an in‐plane geometry as compared to the cross‐plane case.     

High‐Mobility Air‐Stable Naphthalene Diimide‐Based Copolymer Containing Extended π‐Conjugation for n‐Channel Organic Field Effect Transistors

A high‐performance naphthalene diimide (NDI)‐based conjugated polymer for use as the active layer of n‐channel organic field‐effect transistors (OFETs) is reported. The solution‐processable n‐channel polymer is systematically designed and synthesized with an alternating structure of long alkyl substituted‐NDI and thienylene–vinylene–thienylene units (PNDI‐TVT). The material has a well‐controlled molecular structure with an extended π‐conjugated backbone, with no increase in the LUMO level, achieving a high mobility and highly ambient stable n‐type OFET. The top‐gate, bottom‐contact device shows remarkably high electron charge‐carrier mobility of up to 1.8 cm² V^?1 s^?1 (I_on/I_off = 10⁶) with the commonly used polymer dielectric, poly(methyl methacrylate) (PMMA). Moreover, PNDI‐TVT OFETs exhibit excellent air and operation stability. Such high device performance is attributed to improved π–π intermolecular interactions owing to the extended π‐conjugation, apart from the improved crystallinity and highly interdigitated lamellar structure caused by the extended π–π backbone and long alkyl groups.     

Room‐Temperature‐Operated Ultrasensitive Broadband Photodetectors by Perovskite Incorporated with Conjugated Polymer and Single‐Wall Carbon Nanotubes

In this work, room‐temperature‐operated ultrasensitive solution‐processed perovskite photodetectors (PDs) with near infrared (NIR) photoresponse are reported. In order to enable perovskite PDs possessing extended NIR photoresponse, novel n‐type low bandgap conjugated polymer, poly[(N,N′‐bis(2‐octyldodecyl)‐1,4,5,8‐naphthalene diimide‐2,6‐diyl) (2,5‐dioctyl‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4‐dione‐5,5′‐diyl)] (NDI‐DPP), which has strong absorption in the NIR region, is developed and then employed in perovskite PDs. By the formation of type II band alignment between NDI‐DPP with single‐wall carbon nanotubes (SWCNTs), the NIR absorption of NDI‐DPP is exploited, which contributes to the NIR photoresponse for the perovskite PDs, where perovskite is incorporated with NDI‐DPP and SWCNTs as well. In addition, SWCNTs incorporated with perovskite active layer can offer the percolation pathways for high charge‐carrier mobility, which tremendously boosts the charge transfer in the photoactive layer, and consequently improves the photocurrent in the visible region. As a result, the perovskite PDs exhibit the responsivities of ≈400 and ≈150 mA W^?1 and the detectivities of over 6 × 10¹² Jones (1 Jones = 1 cm Hz^1/2 W^?1) and over 2 × 10¹² Jones in the visible and NIR regions, respectively. This work reports the development of perovskite PDs with NIR photoresponse, which is terrifically beneficial for the practical applications of perovskite PDs.     

High‐Performance Piezoelectric,Pyroelectric, and Triboelectric Nanogenerators Based on P(VDF‐TrFE) with Controlled Crystallinity and Dipole Alignment

Poly(vinylidenefluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)), as a ferroelectric polymer, offers great promise for energy harvesting for flexible and wearable applications. Here, this paper shows that the choice of solvent used to dissolve the polymer significantly influences its properties in terms of energy harvesting. Indeed, the P(VDF‐TrFE) prepared using a high dipole moment solvent has higher piezoelectric and pyroelectric coefficients and triboelectric property. Such improvements are the result of higher crystallinity and better dipole alignment of the polymer prepared using a higher dipole moment solvent. Finite element method simulations confirm that the higher dipole moment results in higher piezoelectric, pyroelectric, and triboelectric potential distributions. Furthermore, P(VDF‐TrFE)‐based piezoelectric, pyroelectric, and triboelectric nanogenerators (NGs) experimentally validate that the higher dipole moment solvent significantly enhances the power output performance of the NGs; the improvement is about 24% and 82% in output voltage and current, respectively, for piezoelectric NG; about 40% and 35% in output voltage and current, respectively, for pyroelectric NG; and about 65% and 75% in output voltage and current for triboelectric NG. In brief, the approach of using a high dipole moment solvent is very promising for high output P(VDF‐TrFE)‐based wearable NGs.     

Control of Current Hysteresis of Networked Single‐Walled Carbon Nanotube Transistors by a Ferroelectric Polymer Gate Insulator

Films made of 2D networks of single‐walled carbon nanotubes (SWNTs) are one of the most promising active‐channel materials for field‐effect transistors (FETs) and have a variety of flexible electronic applications, ranging from biological and chemical sensors to high‐speed switching devices. Challenges, however, still remain due to the current hysteresis of SWNT‐containing FETs, which has hindered further development. A new and robust method to control the current hysteresis of a SWNT‐network FET is presented, which involves the non‐volatile polarization of a ferroelectric poly(vinylidene fluoride‐trifluoroethylene) (P(VDF‐TrFE)) gate insulator. A top‐gate FET with a solution‐processed SWNT‐network exhibits significant suppression of the hysteresis when the gate‐voltage sweep is greater than the coercive field of the ferroelectric polymer layer (≈50 MV m^?1). These near‐hysteresis‐free characteristics are believed to be due to the characteristic hysteresis of the P(VDF‐TrFE), resulting from its non‐volatile polarization, which makes effective compensation for the current hysteresis of the SWNT‐network FETs. The onset voltage for hysteresis‐minimized operation is able to be tuned simply by controlling the thickness of the ferroelectric film, which opens the possibility of operating hysteresis‐free devices with gate voltages down to a few volts.     

Bulk Heterojunction Solar Cells: Impact of Minor Structural Modifications to the Polymer Backbone on the Polymer–Fullerene Mixing and Packing and on the Fullerene–Fullerene Connecting Network

The morphology of the active layer of a bulk heterojunction solar cell, made of a blend of an electron‐donating polymer and an electron‐accepting fullerene derivative, is known to play a determining role in device performance. Here, a combination of molecular dynamics simulations and long‐range corrected density functional theory calculations is used to elucidate the molecular‐scale effects that even minor structural changes to the polymer backbone can have on the “local” morphology; this study focuses on the extent of polymer–fullerene mixing, on their packing, and on the characteristics of the fullerene–fullerene connecting network in the mixed regions, aspects that are difficult to access experimentally. Three representative polymer donors are investigated: (i) poly[(5,6‐difluoro‐2,1,3‐benzothiadiazol‐4,7‐diyl)‐alt‐(3,3′″‐di(2‐octyldodecyl)‐2,2′;5′,2″;5″,2′″‐quaterthiophen‐5,5′″‐diyl)] (PffBT4T‐2OD); (ii) poly[(2,1,3‐benzothiadiazol‐4,7‐diyl)‐alt‐(3,3′″‐di(2‐octyldodecyl)‐2,2′;5′,2″;5″,2′″‐quaterthiophen‐5,5′″‐diyl)] (PBT4T‐2OD), where the fluorine atoms in the benzothiadiazole moieties of PffBT4T‐2OD are replaced with hydrogen atoms; and (iii) poly[(2,2′‐bithiophene)‐alt‐(4,7‐bis((2‐decyltetradecyl)thiophen‐2‐yl)‐5,6‐difluoro‐2‐propyl‐2H‐benzo[d][1,2,3]triazole)] (PT2‐FTAZ), where the sulfur atoms in the benzothiadiazole moieties of PffBT4T‐2OD are replaced with nitrogen atoms carrying a linear C₃H₇ side‐chain; these polymers are mixed with the phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) acceptor. This study also discusses the nature of the charge‐transfer electronic states appearing at the donor–acceptor interfaces, the electronic couplings relevant for the charge‐recombination process, and the electron‐transfer features between neighboring PC₇₁BM molecules.