Magnetically Induced Fog Harvesting via Flexible Conical Arrays

Water is the driving force of all nature. Securing freshwater has been one of the most important issues throughout human history, and will be important in the future, especially in the next decade. Fog is ubiquitous in nature and is therefore considered as an alternative and sustainable freshwater resource. Nature has long served as a source of inspiration to develop new fog‐harvesting technologies. However, the collection of freshwater from static fog is still a challenge for the existing bio‐inspired fog‐harvesting systems. Herein, magnetically induced fog harvesting under windless conditions through the integration of cactus‐inspired spine structures and magnetically responsive flexible conical arrays is reported. Under an external magnetic field, static fog can be spontaneously and continuously captured and transported from the tip to the base of the spine due to the Laplace pressure difference. This work demonstrates the advantage of collecting fog water, especially in windless regions, which provides a new avenue for fog harvesting and can serve as a source of inspiration to further optimizations of existing fog‐water‐harvesting strategies.     

Mussel‐Inspired Hydrogels for Self‐Adhesive Bioelectronics

Wearable and implantable bioelectronics are receiving a great deal of attention because they offer huge promise in personalized healthcare. Currently available bioelectronics generally rely on external aids to form an attachment to the human body, which leads to unstable performance in practical applications. Self‐adhesive bioelectronics are highly desirable for ameliorating these concerns by offering reliable and conformal contact with tissue, and stability and fidelity in the signal detection. However, achieving adequate and long‐term self‐adhesion to soft and wet biological tissues has been a daunting challenge. Recently, mussel‐inspired hydrogels have emerged as promising candidates for the design of self‐adhesive bioelectronics. In addition to self‐adhesiveness, the mussel‐inspired chemistry offers a unique pathway for integrating multiple functional properties to all‐in‐one bioelectronic devices, which have great implications for healthcare applications. In this report, the recent progress in the area of mussel‐inspired self‐adhesive bioelectronics is highlighted by specifically discussing: 1) adhesion mechanism of mussels, 2) mussel‐inspired hydrogels with long‐term and repeatable adhesion, 3) the recent advance in development of hydrogel bioelectronics by reconciling self‐adhesiveness and additional properties including conductivity, toughness, transparency, self‐healing, antibacterial properties, and tolerance to extreme environment, and 4) the challenges and prospects for the future design of the mussel‐inspired self‐adhesive bioelectronics.     

Bio‐Inspired Anisotropic Wettability Surfaces from Dynamic Ferrofluid Assembled Templates

The biomimetic principle of harnessing topographical structures to determine liquid motion behavior represents a cutting‐edge direction in constructing green transportation systems without external energy input. Here, inspired by natural Nepenthes peristome, a novel anisotropic wettability surface with characteristic structural features of periodically aligned and overlapped arch‐shaped microcavities, formed by employing ferrofluid assemblies as dynamic templates, is presented. The magnetic strength and orientation are precisely adjustable during the generation process, and thus the size and inclination angle of the ferrofluid droplet templates could be tailored to make the surface morphology of the resultant polymer replica achieve a high degree of similarity to the natural peristome. The resultant anisotropic wettability surface enables autonomous unidirectional water transportation in a fast and continuous way. In addition, it could be tailored into arbitrary shapes to induce water flow along a specific curved path. More importantly, based on the anisotropic wettability surface, novel pump‐free microfluidic devices are constructed to implement multiphase flow reactions, which offer a promising solution to building low‐cost, portable platform for lab‐on‐a‐chip applications.     

A Bio‐inspired Potassium and pH Responsive Double‐gated Nanochannel

Bio‐inspired nanochannels have emerged as an interface to mimic the functionalities of biological nanochannels. One remaining challenge is to develop double‐gated nanochannels with dual response, which can regulate the ion transport direction by alternately opening and closing the two gates. In this work, a bio‐inspired potassium and pH responsive double‐gated nanosystem is presented, constructed through immobilizing C‐quadruplex and G‐quadruplex DNA molecules onto the top and bottom tip side of a cigar‐shaped nanochannel, respectively. It is demonstrated that the two gates of the nanochannel can be opened and closed alternately/simultaneously. This phenomenon results from the attached DNA conformational transition caused by adjusting the concentrations of potassium ion and proton. This design is believed to be the first example of dual‐responsive double‐gated nanosystem, and paves a new way to investigate more intelligent bio‐inspired nanofluidic system.     

Gecko‐Inspired Controllable Adhesive Structures Applied to Micromanipulation

Gecko‐inspired angled elastomer micropillars with flat or round tip endings are presented as compliant pick‐and‐place micromanipulators. The pillars are 35 μm in diameter, 90 μm tall, and angled at an inclination of 20°. By gently pressing the tip of a pillar to a part, the pillar adheres to it through intermolecular forces. Next, by retracting quickly, the part is picked from a given donor substrate. During transferring, the adhesion between the pillar and the part is high enough to withstand disturbances due to external forces or the weight of the part. During release of the part onto a receiver substrate, the contact area of the pillar to the part is drastically reduced by controlled vertical or shear displacement, which results in reduced adhesive forces. The maximum repeatable ratio of pick‐to‐release adhesive forces is measured as 39 to 1. It is found that a flat tip shape and shear displacement control provide a higher pick‐to‐release adhesion ratio than a round tip and vertical displacement control, respectively. A model of forces to serve as a framework for the operation of this micromanipulator is presented. Finally, demonstrations of pick‐and‐place manipulation of micrometer‐scale silicon microplatelets and a centimeter‐scale glass cover slip serve as proofs of the concept. The compliant polymer micropillars are safe for use with fragile parts, and, due to exploiting intermolecular forces, could be effective on most materials and in air, vacuum, and liquid environments.     

Bio‐Inspired Stretchable,Adhesive, and Conductive Structural Color Film for Visually Flexible Electronics

The rapid progress in flexible electronic devices has attracted immense interest in many applications, such as health monitoring devices, sensory skins, and implantable apparatus. Here, inspired by the adhesion features of mussels and the color shift mechanism of chameleons, a novel stretchable, adhesive, and conductive structural color film is presented for visually flexible electronics. The film is generated by adding a conductive carbon nanotubes polydopamine (PDA) filler into an elastic polyurethane (PU) inverse opal scaffold. Owing to the brilliant flexibility and inverse opal structure of the PU layer, the film shows stable stretchability and brilliant structural color. Besides, the catechol groups on PDA impart the film with high tissue adhesiveness and self‐healing capability. Notably, because of its responsiveness, the resultant film is endowed with color‐changing ability that responds to motions, which can function as dual‐signal soft human‐motion sensors for real‐time color‐sensing and electrical signal monitoring. These features make the bio‐inspired hydrogel‐based electronics highly potential in the flexible electronics field.     

Stomata‐Inspired Membrane Produced Through Photopolymerization Patterning

The programmed movements of responsive functional hydrogels have received much attention because of their abundant functions and wide range of engineering applications. In this study, an innovative stomata‐inspired membrane (SIM) is fabricated by using a temperature‐responsive hydrogel through a simple, cost‐effective, and high‐throughput patterned photopolymerization. Polymerization‐induced diffusion on the macroscale surface results in formation of a double‐parted polymer membrane with fine pores after single illumination. After heating the SIM, the less deformable thick frame supports the whole structure and the highly deformable thin base regulates pore shape. Among various SIM types, the slit pores of monocot SIM, which are lined up in parallel, exhibit the largest radius deformation. The morphological configuration of the SIM can be easily controlled by changing the photomask for a given application. As the developed SIM features the sensing‐to‐activation functions of stimuli‐responsive hydrogels and can be easily fabricated, this membrane can be potentially used for numerous practical applications, such as filter membranes with adjustable pores, membrane‐based sensors, membrane‐based actuators, and multifunctional membranes.     

Bio‐Inspired Nanospiky Metal Particles Enable Thin,Flexible, and Thermo‐Responsive Polymer Nanocomposites for Thermal Regulation

Safety issues remain a major obstacle toward large‐scale applications of high‐energy lithium‐ion batteries. Embedding thermo‐responsive polymer switching materials (TRPS) into batteries is a potential strategy to prevent thermal runaway, which is a major cause of battery failures. Here, thin, flexible, highly responsive polymer nanocomposites enabled by bio‐inspired nanospiky metal (Ni) particles are reported. These unique Ni particles are synthesized by a simple aqueous reaction at gram‐scale with controlled surface morphology and composition to optimize electrical properties of the nanocomposites. The Ni particles provide TRPS films with a high room‐temperature conductivity of up to 300 S cm^?1. Such TRPS composite films also have a high rate (<1 s) of resistance switching within a narrow temperature range, good reversibility upon on/off switching, and a tunable switching temperature (T_s; 75 to 170 °C) that can be achieved by tailing their compositions. The small size (≈500 nm) of Ni particles enables ready fabrication of thin and flexible TPRS films with thickness approaching 5 µm or less. These features suggest the great potential of using this new type of responsive polymer composite for more effective battery thermal regulation without sacrificing cell performance.     

Bio‐Inspired Synthesis of Minerals for Energy,Environment, and Medicinal Applications

Biomineralization, the natural pathway of assembling biogenic inorganic compounds, inspires us to exploit unique, effective strategies to fabricate functional materials with intricate structures. In this article, the recent advances in bio‐inspired synthesis of minerals—with a focus on those of calcium‐based minerals—and their applications to the design of functional materials for energy, environment, and biomedical fields are reviewed. Biomimetic mineralization is extending its application range to unconventional area such as the design of component materials for lithium‐ion batteries and elaborately structured composite materials utilizing carbon dioxide gas. Materials with highly enhanced mechanical properties are synthesized through emulating the nacre structure. Studies of bioactive minerals‐carbon hybrid materials show an expansion of potential applications to fields ranging from interdisciplinary science to practical engineering such as the fabrication of reinforced bone‐implantable materials.     

Designing Bio‐Inspired Adhesives for Shear Loading: From Simple Structures to Complex Patterns

The gecko has inspired numerous synthetic adhesive structures, yet under shear loading conditions, general design criteria remains underdeveloped. To provide guidance for bio‐inspired adhesives under shear, a simple scaling theory is used to investigate the relevant geometric and material parameters. The total compliance of an elastic attachment feature is described over many orders of magnitude in aspect ratio through a single continuous function using the superposition of multiple deformation modes such as bending, shear deformation, and tensile elongation. This allows for force capacity predictions of common geometric control parameters such as thickness, aspect ratio, and contact area. This superposition principal is extended to develop criteria for patterned interfaces under shear loading. Importantly, the adhesive patterns under shear are controlled through the compliance in the direction of loading. These predictions are confirmed experimentally using macroscopic building blocks over an extensive range of aspect ratio and contact area. Over 25 simple and complex patterns with various contact geometries are examined, and the effect of geometry and material properties on the shear adhesion behavior is discussed. Furthermore, all of these various attachment features are described with a single scaling parameter, offering control over orders of magnitude in adhesive force capacity for a variety of applications.     

Multi‐Stimuli‐Responsive Microcapsules for Adjustable Controlled‐Release

Novel multi‐stimuli‐responsive microcapsules with adjustable controlled‐release characteristics are prepared by a microfluidic technique. The proposed microcapsules are composed of crosslinked chitosan acting as pH‐responsive capsule membrane, embedded magnetic nanoparticles to realize “site‐specific targeting”, and embedded temperature‐responsive sub‐microspheres serving as “micro‐valves”. By applying an external magnetic field, the prepared smart microcapsules can achieve targeting aggregation at specific sites. Due to acid‐induced swelling of the capsule membranes, the microcapsules exhibit higher release rate at specific acidic sites compared to that at normal sites with physiological pH. More importantly, through controlling the hydrodynamic size of sub‐microsphere “micro‐valves” by regulating the environment temperature, the release rate of drug molecules from the microcapsules can be flexibly adjusted. This kind of multi‐stimuli‐responsive microcapsules with site‐specific targeting and adjustable controlled‐release characteristics provides a new mode for designing “intelligent” controlled‐release systems and is expected to realize more rational drug administration.     

Stimuli‐Responsive Materials for Controlled Release of Theranostic Agents

Stimuli‐responsive materials are so named because they can alter their physicochemical properties and/or structural conformations in response to specific stimuli. The stimuli can be internal, such as physiological or pathological variations in the target cells/tissues, or external, such as optical and ultrasound radiations. In recent years, these materials have gained increasing interest in biomedical applications due to their potential for spatially and temporally controlled release of theranostic agents in response to the specific stimuli. This article highlights several recent advances in the development of such materials, with a focus on their molecular designs and formulations. The future of stimuli‐responsive materials will also be explored, including combination with molecular imaging probes and targeting moieties, which could enable simultaneous diagnosis and treatment of a specific disease, as well as multi‐functionality and responsiveness to multiple stimuli, all important in overcoming intrinsic biological barriers and increasing clinical viability.     

Kirigami‐Inspired Self‐Assembly of 3D Structures

Self‐assembly of 3D structures presents an attractive and scalable route to realize reconfigurable and functionally capable mesoscale devices without human intervention. A common approach for achieving this is to utilize stimuli‐responsive folding of hinged structures, which requires the integration of different materials and/or geometric arrangements along the hinges. It is demonstrated that the inclusion of Kirigami cuts in planar, hingeless bilayer thin sheets can be used to produce complex 3D shapes in an on‐demand manner. Nonlinear finite element models are developed to elucidate the mechanics of shape morphing in bilayer thin sheets and verify the predictions through swelling experiments of planar, millimeter‐scaled PDMS (polydimethylsiloxane) bilayers in organic solvents. Building upon the mechanistic understandings, The transformation of Kirigami‐cut simple bilayers into 3D shapes such as letters from the Roman alphabet (to make “ADVANCED FUNCTIONAL MATERIALS”) and open/closed polyhedral architectures is experimentally demonstrated. A possible application of the bilayers as tether‐less optical metamaterials with dynamically tunable light transmission and reflection behaviors is also shown. As the proposed mechanistic design principles could be applied to a variety of materials, this research broadly contributes toward the development of smart, tetherless, and reconfigurable multifunctional systems.     

2,7‐Bis(diarylamino)‐9,9‐dimethylfluorenes as Hole‐Transport Materials for Organic Light‐Emitting Diodes

2,7‐Bis(p‐methoxyphenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 1′ ), 2,7‐bis(phenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 2′ ) and 2,7‐bis(p‐fluorophenyl‐m′‐tolylamino)‐9,9‐dimethylfluorene ( 3′ ) have been synthesized using the palladium‐catalyzed reaction of the appropriate diarylamines with 2,7‐dibromo‐9,9‐dimethylfluorene. These molecules have glass‐transition temperatures 15–20 °C higher than those for their biphenyl‐bridged analogues, and are 0.11–0.14 V more readily oxidized. Fluorescence spectra and fluorescence quantum yields for dimethylfluorene‐bridged and biphenyl‐bridged species are similar, but the peaks of the absorption spectra of 1′ – 3′ are considerably red‐shifted relative to those of their biphenyl‐bridged analogues. Time‐of‐flight hole mobilities of 1′ – 3′ /polystyrene blends are in a similar range to those of the biphenyl‐bridged analogues. Analysis according to the disorder formalism yields parameters rather similar to those for the biphenyl species, but with somewhat lower zero‐field mobility values. Density functional theory (DFT) calculations suggest that the enforced planarization of the fluorene bridge leads to a slightly larger reorganization energy for the neutral/cation electron‐exchange reaction than in the biphenyl‐bridged system. Organic light‐emitting diodes have been fabricated using 1′ – 3′ /polystyrene blends as the hole‐transport layer and tris(8‐hydroxy quinoline)aluminium as the electron‐transport layer and lumophore. Device performance shows a correlation with the ionization potential of the amine materials paralleling that seen in biphenyl‐based systems, and fluorene species show similar performance to biphenyl species with comparable ionization potential.     

Design and Fabrication of Magnetically Functionalized Core/Shell Microspheres for Smart Drug Delivery

The fabrication of magnetically functionalized core/shell microspheres by using the microfluidic flow‐focusing (MFF) approach is reported. The shell of each microsphere is embedded with magnetic nanoparticles, thereby enabling the microspheres to deform under an applied magnetic field. By encapsulating a drug, for example, aspirin, inside the microspheres, the drug release of the microspheres is enhanced under the compression–extension oscillations that are induced by an AC magnetic field. This active pumping mode of drug release can be controlled by varying the frequency and magnitude of the applied magnetic field as well as the time profile of the magnetic field. UV absorption measurements of cumulative aspirin release are carried out to determine the influence of these factors. The drug release behavior is found to be significantly different depending on whether the applied field varies sinusoidally or in a step‐function manner with time.     

Structure–Property Relationship of Pyridine‐Containing Triphenyl Benzene Electron‐Transport Materials for Highly Efficient Blue Phosphorescent OLEDs

Three triphenyl benzene derivatives of 1,3,5‐tri(m‐pyrid‐2‐yl‐phenyl)benzene (Tm2PyPB), 1,3,5‐tri(m‐pyrid‐3‐yl‐phenyl)benzene (Tm3PyPB) and 1,3,5‐tri(m‐pyrid‐4‐yl‐phenyl)benzene (Tm4PyPB), containing pyridine rings at the periphery, are developed as electron‐transport and hole/exciton‐blocking materials for iridium(III) bis(4,6‐(di‐fluorophenyl)pyridinato‐N,C^2′)picolinate (FIrpic)‐based blue phosphorescent organic light‐emitting devices. Their highest occupied molecular orbital and lowest unoccupied molecular orbital (LUMO) energy levels decrease as the nitrogen atom of the pyridine ring moves from position 2 to 3 and 4; this is supported by both experimental results and density functional theory calculations, and gives improved electron‐injection and hole‐blocking properties. They exhibit a high electron mobility of 10^?4–10^?3 cm² V^?1 s^?1 and a high triplet energy level of 2.75 eV. Confinement of FIrpic triplet excitons is strongly dependent on the nitrogen atom position of the pyridine ring. The second exponential decay component in the transient photoluminescence decays of Firpic‐doped films also decreases when the position of the nitrogen atom in the pyridine ring changes. Reduced driving voltages are obtained when the nitrogen atom position changes because of improved electron injection as a result of the reduced LUMO level, but a better carrier balance is achieved for the Tm3PyPB‐based device. An external quantum efficiency (EQE) over 93% of maximum EQE was achieved for the Tm4PyPB‐based device at an illumination‐relevant luminance of 1000 cd m^?2, indicating reduced efficiency roll‐off due to better confinement of FIrpic triplet excitons by Tm4PyPB in contrast to Tm2PyPB and Tm3PyPB.     

Luminescent Poly(p‐phenylenevinylene) Hole‐Transport Layers with Adjustable Solubility

The active part of present polymer light‐emitting diodes (PLEDs) consists of only a single layer. Multilayer devices have the advantage that the electron and hole transport can be balanced and that the recombination can be removed from the metallic cathode, leading to higher efficiencies. A major problem for polymer‐based multilayer devices is the solubility of the materials used; a multilayer can not be fabricated when a spin‐cast layer dissolves in the solvent of the subsequent layer. We demonstrate the development of high‐mobility poly(p‐phenylenevinylene) (PPV)‐based hole‐transport layers with tunable solubility by chemical modification. Enhanced charge‐transport properties are achieved by using symmetrically substituted PPVs; copolymers of long and short side chains enable us to tune the solubility without loss of the enhanced charge transport. Dual‐layer PLEDs, in which the holes are efficiently transported via this copolymer towards the luminescent layer, exhibit an enhanced efficiency at high voltages (> 10 V) and a strongly improved robustness against electrical breakdown.     

Multi‐Stimuli Responsive Hydrogel Cilia

Large arrays of high aspect ratio, artificial hydrogel based cilia that can respond to multiple stimuli are produced by means of micro‐fabrication techniques. The cilia operate in aqueous solutions and are sensitive to pH, electric and/or magnetic fields. The biomimetic system combines both sensing and motility. Detection of changes in environment, such as a decrease in pH, triggers a collective response, to an external time‐dependent magnetic field.     

Protein/Polymer‐Based Dual‐Responsive Gold Nanoparticles with pH‐Dependent Thermal Sensitivity

This article presents the synthesis and physicochemical behavior of dual‐responsive plasmonic nanoparticles with reversible optical properties based on protein‐coated gold nanoparticles grafted with thermosensitive polymer brushes by means of surface‐initiated atom transfer radical polymerization (SI‐ATRP) that exhibit pH‐dependent thermo‐responsive behavior. Spherical gold NPs of two different sizes (15 nm and 60 nm) and with different stabilizing agents (citrate and cetyltrimethylammonium bromide (CTAB), respectively) were first capped with bovine serum albumin (BSA). The resulting BSA‐capped NPs (Au@BSA NPs) exhibited not only extremely high colloidal stability under physiological conditions, but also a reversible U‐shaped pH‐responsive behavior, similar to pure BSA. The ?‐amine of the L‐lysine in the protein coating was then used to covalently bind an ATRP‐initiator, allowing for the SI‐ATRP of thermosensitive polymer brushes of oligo(ethylene glycol) methacrylates with an LCST of 42 °C in pure water and around 37 °C under physiological conditions. Such protein coated nanoparticles grafted with thermosensitive polymers exhibit a smart pH‐dependent thermosensitive behavior.