Highly Stretchable,Elastic, and Ionic Conductive Hydrogel for Artificial Soft Electronics

High conductivity, large mechanical strength, and elongation are important parameters for soft electronic applications. However, it is difficult to find a material with balanced electronic and mechanical performance. Here, a simple method is developed to introduce ion‐rich pores into strong hydrogel matrix and fabricate a novel ionic conductive hydrogel with a high level of electronic and mechanical properties. The proposed ionic conductive hydrogel is achieved by physically cross‐linking the tough biocompatible polyvinyl alcohol (PVA) gel as the matrix and embedding hydroxypropyl cellulose (HPC) biopolymer fibers inside matrix followed by salt solution soaking. The wrinkle and dense structure induced by salting in PVA matrix provides large stress (1.3 MPa) and strain (975%). The well‐distributed porous structure as well as ion migration–facilitated ion‐rich environment generated by embedded HPC fibers dramatically enhances ionic conductivity (up to 3.4 S m^?1, at f = 1 MHz). The conductive hybrid hydrogel can work as an artificial nerve in a 3D printed robotic hand, allowing passing of stable and tunable electrical signals and full recovery under robotic hand finger movements. This natural rubber‐like ionic conductive hydrogel has a promising application in artificial flexible electronics.     

Fabrication of Complex Hydrogel Structures Using Suspended Layer Additive Manufacturing (SLAM)

There have been a number of recently reported approaches for the manufacture of complex 3D printed cell‐containing hydrogels. Given the fragility of the parts during manufacturing, the most successful approaches use a supportive particulate gel bed and have enabled the production of complex gel structures previously unattainable using other 3D printing methods. The supporting gel bed provides protection to the fragile printed part during the printing process, preventing the structure from collapsing under its own weight prior to crosslinking. Despite the apparent similarity of the particulate beds, the way the particles are manufactured strongly influences how they interact with one another and the part during fabrication, with implications to the quality of the final product. Recently, the process of suspended layer additive manufacture (SLAM) is demonstrated to create a structure that recapitulated the osteochondral region by printing into an agarose particulate gel. The manufacturing process for this gel (the application of shear during gelation) produced a self‐healing gel with rapid recovery of its elastic properties following disruption. Here, the physical characteristics of the supporting fluid‐gel matrix used in SLAM are explored, and compared to other particulate gel supporting beds, highlighting its potential for producing complex hydrogel‐based parts.     

Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect

The emerging 3D printing technique allows for tailoring hydrogel‐based soft structure tissue scaffolds for individualized therapy of osteochondral defects. However, the weak mechanical strength and uncontrollable swelling intrinsic to conventional hydrogels restrain their use as bioinks. Here, a high‐strength thermoresponsive supramolecular copolymer hydrogel is synthesized by one‐step copolymerization of dual hydrogen bonding monomers, N‐acryloyl glycinamide, and N‐[tris(hydroxymethyl)methyl] acrylamide. The obtained copolymer hydrogels demonstrate excellent mechanical properties—robust tensile strength (up to 0.41 MPa), large stretchability (up to 860%), and high compressive strength (up to 8.4 MPa). The rapid thermoreversible gel ? sol transition behavior makes this copolymer hydrogel suitable for direct 3D printing. Successful preparation of 3D‐printed biohybrid gradient hydrogel scaffolds is demonstrated with controllable 3D architecture, owing to shear thinning property which allows continuous extrusion through a needle and also immediate gelation of fluid upon deposition on the cooled substrate. Furthermore, this biohybrid gradient hydrogel scaffold printed with transforming growth factor beta 1 and β‐tricalciumphosphate on distinct layers facilitates the attachment, spreading, and chondrogenic and osteogenic differentiation of human bone marrow stem cells (hBMSCs) in vitro. The in vivo experiments reveal that the 3D‐printed biohybrid gradient hydrogel scaffolds significantly accelerate simultaneous regeneration of cartilage and subchondral bone in a rat model.     

Surface Patterning of Hydrogels for Programmable and Complex Shape Deformations by Ion Inkjet Printing

Convenient patterning and precisely programmable shape deformations are crucial for the practical applications of shape deformable hydrogels. Here, a facile and versatile computer‐assisted ion inkjet printing technique is described that enables the direct printing of batched, very complicated patterns, especially those with well‐defined, programmable variation in cross‐linking densities, on one or both surfaces of a large‐sized hydrogel sample. A mechanically strong hydrogel containing poly(sodium acrylate) is first prepared, and then digital patterns are printed onto the hydrogel surfaces by using a commercial inkjet printer and an aqueous ferric solution. The complexation between the polyelectrolyte and ferric ions increases the cross‐linking density of the printed regions, and hence the gel sample can undergo shape deformation upon swelling/deswelling. The deformation rates and degrees of the hydrogels can be conveniently adjusted by changing the printing times or the different/gradient grayscale distribution of designed patterns. By printing appropriate patterns on one or both surfaces of the hydrogel sheets, many complex 3D shapes are obtained from shape deformations upon swelling/deswelling, such as cylindrical shell and forsythia flower (patterns on one surface), ding (patterns on both surfaces), blooming flower (different/gradient grayscale distributive patterns on one surface), and non‐Euclidean plates (different/gradient grayscale distributive patterns on both surfaces).     

A Printable Photopolymerizable Thermosensitive p(HPMAm‐lactate)‐PEG Hydrogel for Tissue Engineering

Bioprinting is a new technology in regenerative medicine that allows the engineering of tissues by specific placement of cells in biomaterials. Importantly, the porosity and the relatively small dimensions of the fibers allow rapid diffusion of nutrients and metabolites. This technology requires the availability of hydrogels that ensure viability of encapsulated cells and have adequate mechanical properties for the preparation of structurally stable and well‐defined three‐dimensional constructs. The aim of this study is to evaluate the suitability of a biodegradable, photopolymerizable and thermosensitive A–B–A triblock copolymer hydrogel as a synthetic extracellular matrix for engineering tissues by means of three dimensional fiber deposition. The polymer is composed of poly(N‐(2‐hydroxypropyl)methacrylamide lactate) A‐blocks, partly derivatized with methacrylate groups, and hydrophilic poly(ethylene glycol) B‐blocks of a molecular weight of 10 kDa. Gels are obtained by thermal gelation and stabilized with additional chemical cross‐links by photopolymerization of the methacrylate groups coupled to the polymer. A power law dependence of the storage plateau modulus of the studied hydrogels on polymer concentration is observed for both thermally and chemically cross‐linked hydrogels. The hydrogels demonstrated mechanical characteristics similar to natural semi‐flexible polymers, including collagen. Moreover, the hydrogel shows suitable mechanical properties for bioprinting, allowing subsequent layer‐by‐layer deposition of gel fibers to form stable constructs up to at least 0.6 cm (height) with different patterns and strand spacing. The resulting constructs have reproducible vertical porosity and the ability to maintain separate localization of encapsulated fluorescent microspheres. Moreover, the constructs show an elastic modulus of 119 kPa (25 wt% polymer content) and a degradation time of approximately 190 days. Furthermore, high viability is observed for encapsulated chondrocytes after 1 and 3 days of culture. In summary, we conclude that the evaluated hydrogel is an interesting candidate for bioprinting applications.     

Printable Organic‐Inorganic Nanoscale Multilayer Gate Dielectrics for Thin‐Film Transistors Enabled by a Polymeric Organic Interlayer

Here, a new approach to the layer‐by‐layer solution‐processed fabrication of organic/inorganic hybrid self‐assembled nanodielectrics (SANDs) is reported and it is demonstrated that these ultrathin gate dielectric films can be printed. The organic SAND component, named P‐PAE, consists of polarizable π‐electron phosphonic acid‐based units bound to a polymeric backbone. Thus, the new polymeric SAND (PSAND) can be fabricated either by spin‐coating or blade‐coating in air, by alternating P‐PAE, a capping reagent layer, and an ultrathin ZrOx layer. The new PSANDs thickness vary from 6 to 15 nm depending on the number of organic‐ZrOx bilayers, exhibit tunable film thickness, well‐defined nanostructures, large electrical capacitance (up to 558 nF cm^?2), and good insulating properties (leakage current densities as low as 10^?6 A cm^?2). Organic thin‐film transistors that are fabricated with representative p‐/n‐type organic molecular/polymeric semiconducting materials, function well at low voltages (<3.0 V). Furthermore, flexible TFTs fabricated with PSAND exhibit excellent mechanical flexibility and good stress stability, offering a promising route to low operating voltage flexible electronics. Finally, printable PSANDs are also demonstrated and afford TFTs with electrical properties comparable to those achieved with the spin‐coated PSAND‐based devices.     

Inkjet‐Printed Single‐Droplet Organic Transistors Based on Semiconductor Nanowires Embedded in Insulating Polymers

Fabrication of organic field‐effect transistors (OFETs) using a high‐throughput printing process has garnered tremendous interest for realizing low‐cost and large‐area flexible electronic devices. Printing of organic semiconductors for active layer of transistor is one of the most critical steps for achieving this goal. The charge carrier transport behavior in this layer, dictated by the crystalline microstructure and molecular orientations of the organic semiconductor, determines the transistor performance. Here, it is demonstrated that an inkjet‐printed single‐droplet of a semiconducting/insulating polymer blend holds substantial promise as a means for implementing direct‐write fabrication of organic transistors. Control of the solubility of the semiconducting component in a blend solution can yield an inkjet‐printed single‐droplet blend film characterized by a semiconductor nanowire network embedded in an insulating polymer matrix. The inkjet‐printed blend films having this unique structure provide effective pathways for charge carrier transport through semiconductor nanowires, as well as significantly improve the on‐off current ratio and the environmental stability of the printed transistors.     

Fast‐Response,Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing

Soft robots have the appealing advantages of being highly flexible and adaptive to complex environments. However, the low‐stiffness nature of the constituent materials makes soft robotic systems incompetent in tasks requiring relatively high load capacity. Despite recent attempts to develop stiffness‐tunable soft actuators by employing variable stiffness materials and structures, the reported stiffness‐tunable actuators generally suffer from limitations including slow responses, small deformations, and difficulties in fabrication with microfeatures. This work presents a paradigm to design and manufacture fast‐response, stiffness‐tunable (FRST) soft actuators via hybrid multimaterial 3D printing. The integration of a shape memory polymer layer into the fully printed actuator body enhances its stiffness by up to 120 times without sacrificing flexibility and adaptivity. The printed Joule‐heating circuit and fluidic cooling microchannel enable fast heating and cooling rates and allow the FRST actuator to complete a softening–stiffening cycle within 32 s. Numerical simulations are used to optimize the load capacity and thermal rates. The high load capacity and shape adaptivity of the FRST actuator are finally demonstrated by a robotic gripper with three FRST actuators that can grasp and lift objects with arbitrary shapes and various weights spanning from less than 10 g to up to 1.5 kg.     

High efficiency screen‐printed EFG Si solar cells through rapid thermal processing‐induced bulk lifetime enhancement

This paper shows that one second (1 s) firing of Si solar cells with screen‐printed Al on the back and SiN _x anti‐reflection coating on the front can produce a high quality Al‐doped back‐surface‐field (Al‐BSF) and significantly enhance SiN _x ‐induced defect hydrogenation in the bulk Si. Open‐circuit voltage, internal quantum efficiency measurements, and cross‐sectional scanning electron microscopy pictures on float‐zone silicon cells revealed that 1 s firing in rapid thermal processing at 750°C produces just as good a BSF as 60 s firing, indicating that the quality of Al‐BSF region is not a strong function of RTP firing time at 750°C. Analysis of edge‐defined film‐fed grown (EFG) Si cells showed that short‐term firing is much more effective in improving the hydrogen passivation of bulk defects in EFG Si. Average minority‐carrier lifetime in EFG wafers improved from ∼3 to ∼33 μs by 60 s firing but reached as high as 95μs with 1 s firing, resulting in 15·6% efficient screen‐printed cells on EFG Si. Copyright © 2004 John Wiley & Sons, Ltd.     

Chitosan Hydrogel‐Capped Porous SiO2 as a pH Responsive Nano‐Valve for Triggered Release of Insulin

A pH responsive, chitosan‐based hydrogel film is used to cap the pores of a porous SiO₂ layer. The porous SiO₂ layer is prepared by thermal oxidation of an electrochemically etched Si wafer, and the hydrogel film is prepared by reaction of chitosan with glycidoxypropyltrimethoxysilane (GPTMS). Optical reflectivity spectroscopy and scanning electron microscopy (SEM) confirm that the bio‐polymer only partially infiltrates the porous SiO₂ film, generating a double layer structure. The optical reflectivity spectrum displays Fabry–Pérot interference fringes characteristic of a double layer, which is characterized using reflective interferometric Fourier transform spectroscopy (RIFTS). Monitoring the position of the RIFTS peak corresponding to the hydrogel layer allows direct, real‐time observation of the reversible volume phase transition of the hydrogel upon cycling of pH in the range 6.0–7.4. The swelling ratio and response time are controlled by the relative amount of GPTMS in the hydrogel. The pH‐dependent volume phase transition can be used to release insulin trapped in the porous SiO₂ layer underneath the hydrogel film. At pH 7.4, the gel in the top layer effectively blocks insulin release, while at pH 6.0 insulin penetrates the swollen hydrogel layer, resulting in a steady release into solution.     

2D Janus Hybrid Materials of Polymer‐Grafted Carbon Nanotube/Graphene Oxide Thin Film as Flexible,Miniature Electric Carpet

Ultrathin, freestanding polymer hybrid film with macroscopic sizes and molecular thicknesses have received significant interest due to their applications as functional devices, microsensors or nanoactuators. Herein, a 2D Janus hybrid of polymer‐grafted carbon nanotubes/graphene oxide (CNTs/GO) thin film is fabricated using microcontact printed CNTs/GO as photo active surface to grow polymer brushes by self‐initiated photografting and photopolymerization selectively from one side of CNTs/GO film. This achieved 2D Janus hybrid materials with grafted polymer layer as insulative carpet and supported CNTs/GO thin film as conductive element have the potential application as flexible and miniature electric carpet for heating micro‐/nano devices locally.     

Cellulose Nanofibrils Enhanced,Strong, Stretchable,Freezing‐Tolerant Ionic Conductive Organohydrogel for Multi‐Functional Sensors

To date, ionic conducting hydrogel attracts tremendous attention as an alternative to the conventional rigid metallic conductors in fabricating flexible devices, owing to their intrinsic characteristics. However, simultaneous realization of high stiffness, toughness, ionic conductivity, and freezing tolerance through a simple approach is still a challenge. Here, a novel highly stretchable (up to 660%), strong (up to 2.1 MPa), tough (5.25 MJ m^?3), and transparent (up to 90%) ionic conductive (3.2 S m^?1) organohydrogel is facilely fabricated, through sol–gel transition of polyvinyl alcohol and cellulose nanofibrils (CNFs) in dimethyl sulfoxide‐water solvent system. The ionic conductive organohydrogel presents superior freezing tolerance, remaining flexible and conductive (1.1 S m^?1) even at ?70 °C, as compared to the other reported anti‐freezing ionic conductive (organo)hydrogel. Notably, this material design demonstrates synergistic effect of CNFs in boosting both mechanical properties and ionic conductivity, tackling a long‐standing dilemma among strength, toughness, and ionic conductivity for the ionic conducting hydrogel. In addition, the organohydrogel displays high sensitivity toward both tensile and compressive deformation and based on which multi‐functional sensors are assembled to detect human body movement with high sensitivity, stability, and durability. This novel organohydrogel is envisioned to function as a versatile platform for multi‐functional sensors in the future.     

Conductive “Smart” Hybrid Hydrogels with PNIPAM and Nanostructured Conductive Polymers

Stimuli‐responsive hydrogels with decent electrical properties are a promising class of polymeric materials for a range of technological applications, such as electrical, electrochemical, and biomedical devices. In this paper, thermally responsive and conductive hybrid hydrogels are synthesized by in situ formation of continuous network of conductive polymer hydrogels crosslinked by phytic acid in poly(N‐isopropylacrylamide) matrix. The interpenetrating binary network structure provides the hybrid hydrogels with continuous transporting path for electrons, highly porous microstructure, strong interactions between two hydrogel networks, thus endowing the hybrid hydrogels with a unique combination of high electrical conductivity (up to 0.8 S m^?1), high thermoresponsive sensitivity (significant volume change within several seconds), and greatly enhanced mechanical properties. This work demonstrates that the architecture of the filling phase in the hydrogel matrix and design of hybrid hydrogel structure play an important role in determining the performance of the resulting hybrid material. The attractive performance of these hybrid hydrogels is further demonstrated by the developed switcher device which suggests potential applications in stimuli‐responsive electronic devices.     

High‐Performance Top‐Gated Organic Field‐Effect Transistor Memory using Electrets for Monolithic Printed Flexible NAND Flash Memory

High‐performance top‐gated organic field‐effect transistor (OFET) memory devices using electrets and their applications to flexible printed organic NAND flash are reported. The OFETs based on an inkjet‐printed p‐type polymer semiconductor with efficiently chargeable dielectric poly(2‐vinylnaphthalene) (PVN) and high‐k blocking gate dielectric poly(vinylidenefluoride‐trifluoroethylene) (P(VDF‐TrFE)) shows excellent non‐volatile memory characteristics. The superior memory characteristics originate mainly from reversible charge trapping and detrapping in the PVN electret layer efficiently in low‐k/high‐k bilayered dielectrics. A strategy is devised for the successful development of monolithically inkjet‐printed flexible organic NAND flash memory through the proper selection of the polymer electrets (PVN or PS), where PVN/‐ and PS/P(VDF‐TrFE) devices are used as non‐volatile memory cells and ground‐ and bit‐line select transistors, respectively. Electrical simulations reveal that the flexible printed organic NAND flash can be possible to program, read, and erase all memory cells in the memory array repeatedly without affecting the non‐selected memory cells.     

A Hybrid Peptide Amphiphile Fiber PEG Hydrogel Matrix for 3D Cell Culture

Since the traditional 2D surface for cell growth has been shown to be increasingly insufficient in contemporary cell biology, more and more research is performed on 3D matrices that can better represent the natural extracellular matrix (ECM) in many aspects. To create such a complex nonuniform 3D matrix, four‐armed polyethylene glycol with azides and (1R,8S,9S)‐bicyclo[6.1.0]non‐4‐yn‐9‐yl groups is functionalized to form the hydrogel basis. Together with these, a matrix metalloproteinase cleavable peptide sequence as a functional motif is also built in to add degradability to the hydrogel. In addition, self‐assembled peptide amphiphile (PA) fibers containing a cellular binding peptide sequence (RGDS) are encapsulated in the hydrogel to mimic the natural fibrous structure of the ECM and to stimulate cell adhesion. Rheology studies confirm that the polymer dissolved in the PA fiber solution forms a stable hydrogel with acceptable mechanical properties (G′ = 3.8 kPa). In addition, it is shown that this hydrogel network is degradable under the action of a metalloproteinase enzyme. Finally, the hybrid hydrogel is used to culture and it is demonstrated that both HeLa cells and human mesenchymal stem cells show adherence, good viability, and a well‐spread shape inside the hybrid hydrogel after 5 days of incubation when all components are present.     

Cationic Hybrid Hydrogels from Amino‐Acid‐Based Poly(ester amide): Fabrication,Characterization, and Biological Properties

A family of biodegradable, biocompatible, water soluble cationic polymer precursor, arginine‐based unsaturated poly (ester amide) (Arg‐UPEA), is reported. Its incorporation into conventional Pluronic diacrylate (Pluronic‐DA) to form hybrid hydrogels for a significant improvement of the biological performance of current synthetic hydrogels is shown. The gel fraction (G_f), equilibrium swelling ratio (Q_eq), compressive modulus, and interior morphology of the hybrid hydrogels as well as their interactions with human fibroblasts and bovine endothelial cells are fully investigated. It is found that the incorporation of Arg‐UPEA into Pluronic‐DA hydrogels significantly changes their Q_eq, mechanical strength, and interior morphology. The structure–property relationship of the newly fabricated hybrid hydrogels is studied in terms of the chemical structure of the Arg‐UPEA precursor, i.e., the number of methylene groups in the Arg‐UPEA repeating unit. The results indicate that increasing methylene groups in the Arg‐UPEA repeating unit increases Q_eq and decreases the compressive modulus of hydrogels. When compared with a pure Pluronic hydrogel, the cationic Arg‐UPEAs/Pluronic hybrid hydrogels greatly improve the attachment and proliferation of human fibroblasts on hydrogel surfaces. A bovine aortic endothelial cells (BAEC) viability test in the interior of the hydrogels shows that the positively charged hybrid hydrogels can significantly improve the viability of the encapsulated endothelial cell over a 2 week study period when compared with a pure Pluronic hydrogel.     

Influence of surface treatment prior to ALD high-/spl kappa/ dielectrics on the performance of SiGe surface-channel pMOSFETs

Compressively strained Si/sub 0.7/Ge/sub 0.3/ surface-channel pMOSFETs with atomic layer deposition (ALD) Al/sub 2/O/sub 3//HfO/sub 2//Al/sub 2/O/sub 3/ nanolaminate and low-pressure chemical vapor deposition p/sup +/ poly-SiGe gate electrode were fabricated. Surface treatment with either hydrogen fluoride (HF) clean, or HF clean followed by water rinse was performed prior to the ALD processing. The devices with water rinse show a good control of interfacial layer and device reproducibility, while the devices without water rinse lack a clearly observable interfacial layer and show scattered electrical characteristics and distorted mobility curve. A /spl sim/20% increase in hole mobility compared to the Si universal mobility and a /spl sim/0.6-nm-thick continuous interfacial layer are obtained for the pMOSFETs with water rinse.     

High‐Transconductance Organic Thin‐Film Electrochemical Transistors for Driving Low‐Voltage Red‐Green‐Blue Active Matrix Organic Light‐Emitting Devices

Switching and control of efficient red, green, and blue active matrix organic light‐emitting devices (AMOLEDs) by printed organic thin‐film electrochemical transistors (OETs) are demonstrated. These all‐organic pixels are characterized by high luminance at low operating voltages and by extremely small transistor dimensions with respect to the OLED active area. A maximum brightness of ≈900 cd m^?2 is achieved at diode supply voltages near 4 V and pixel selector (gate) voltages below 1 V. The ratio of OLED to OET area is greater than 100:1 and the pixels may be switched at rates up to 100 Hz. Essential to this demonstration are the use of a high capacitance electrolyte as the gate dielectric layer in the OETs, which affords extremely large transistor transconductances, and novel graded emissive layer (G‐EML) OLED architectures that exhibit low turn‐on voltages and high luminescence efficiency. Collectively, these results suggest that printed OETs, combined with efficient, low voltage OLEDs, could be employed in the fabrication of flexible full‐color AMOLED displays.     

4D Printing of Hydrogels: A Review

3D printing permits the construction of objects by layer‐by‐layer deposition of material, resulting in precise control of the dimensions and properties of complex printed structures. Although 3D printing fabricates inanimate objects, the emerging technology of 4D printing allows for animated structures that change their shape, function, or properties over time when exposed to specific external stimuli after fabrication. Among the materials used in 4D printing, hydrogels have attracted growing interest due to the availability of various smart hydrogels. The reversible shape‐morphing in 4D printed hydrogel structures is driven by a stress mismatch arising from the different swelling degrees in the parts of the structure upon application of a stimulus. This review provides the state‐of‐the‐art of 4D printing of hydrogels from the materials perspective. First, the main 3D printing technologies employed are briefly depicted, and, for each one, the required physico‐chemical properties of the precursor material. Then, the hydrogels that have been printed are described, including stimuli‐responsive hydrogels, non‐responsive hydrogels that are sensitive to solvent absorption/desorption, and multimaterial structures that are totally hydrogel‐based. Finally, the current and future applications of this technology are presented, and the requisites and avenues of improvement in terms of material properties are discussed.     

2D and 3D Hybrid Systems for Enhancement of Chondrogenic Differentiation of Tonsil‐Derived Mesenchymal Stem Cells

2D/3D hybrid cell culture systems are constructed by increasing the temperature of the thermogelling poly(ethylene glycol)‐poly(l ‐alanine) diblock copolymer (PEG‐l ‐PA) aqueous solution in which tonsil tissue‐derived mesenchymal stem cells and graphene oxide (GO) or reduced graphene oxide (rGO) are suspended, to 37 °C. The cells exhibit spherical cell morphologies in 2D/3D hybrid culture systems of GO/PEG‐l ‐PA and rGO/PEG‐l ‐PA by using the growth medium. The cell proliferations are 30%–50% higher in the rGO/PEG‐l ‐PA hybrid system than in the GO/PEG‐l ‐PA hybrid system. When chondrogenic culture media enriched with TGF‐β3 is used in the 2D/3D hybrid systems, cells extensively aggregate, and the expression of chondrogenic biomarkers of SOX 9, COL II A1, COL II, and COL X significantly increases in the GO/PEG‐l ‐PA 2D/3D hybrid system as compared with the PEG‐l ‐PA 3D systems and rGO/PEG‐l ‐PA 2D/3D hybrid system, suggesting that the GO/PEG‐l ‐PA 2D/3D hybrid system can be an excellent candidate as a chondrogenic differentiation platform of the stem cell. This paper also suggests that a 2D/3D hybrid system prepared by incorporating 2D materials with various surface biofunctionalities in the in situ forming 3D hydrogel matrix can be a new cell culture system.