Focal Infection Treatment using Laser‐Mediated Heating of Injectable Silk Hydrogels with Gold Nanoparticles

Medical treatment of subcutaneous bacterial abscesses usually involves systemic high‐dose antibiotics and incision‐drainage of the wound. Such an approach suffers from two main deficiencies: bacterial resistance to antibiotics and pain associated with multiple incision‐drainage‐wound packing procedures. Furthermore, the efficacy of high‐dose systemic antibiotics is limited because of the inability to penetrate into the abscess. To address these obstacles, a treatment relying on laser‐induced heating of gold nanoparticles embedded in an injectable silk‐protein hydrogel is presented. Although bactericidal nanoparticle systems have been previously employed based on silver and nitric oxide, they have limitations regarding customization and safety. The method proposed here is safe and uses biocompatible, highly tunable materials: an injectable silk hydrogel and Au nanoparticles, which are effective absorbers at low laser powers such as those provided by hand‐held devices. A single 10‐minute laser treatment of a subcutaneous infection in mice preserves the general tissue architecture, while achieving a bactericidal effect, even resulting in complete eradication in some cases. The unique materials platform presented can provide the basis for an alternative treatment of focal infections.     

Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications

Three–dimensional, microperiodic scaffolds of regenerated silk fibroin have been fabricated for tissue engineering by direct ink writing. The ink, which consisted of silk fibroin solution from the Bombyx mori silkworm, was deposited in a layer‐by‐layer fashion through a fine nozzle to produce a 3D array of silk fibers of diameter 5 µm. The extruded fibers crystallized when deposited into a methanol‐rich reservoir, retaining a pore structure necessary for media transport. The rheological properties of the silk fibroin solutions were investigated and the crystallized silk fibers were characterized for structure and mechanical properties by infrared spectroscopy and nanoindentation, respectively. The scaffolds supported human bone marrow‐derived mesenchymal stem cell (hMSC) adhesion, and growth. Cells cultured under chondrogenic conditions on these scaffolds supported enhanced chondrogenic differentiation based on increased glucosaminoglycan production compared to standard pellet culture. Our results suggest that 3D silk fibroin scaffolds may find potential application as tissue engineering constructs due to the precise control of their scaffold architecture and their biocompatibility.     

Self‐Assembling Doxorubicin Silk Hydrogels for the Focal Treatment of Primary Breast Cancer

Standard care for early stage breast cancer includes tumor resection and local radiotherapy to achieve long‐term remission. Systemic chemotherapy provides only low locoregional control of the disease; to address this, self‐assembling silk hydrogels that can retain and then deliver doxorubicin locally are described. Self‐assembling silk hydrogels show no swelling, are readily loaded with doxorubicin under aqueous conditions, and release drug over 4 weeks in amounts that can be fine‐tuned by varying the silk content. Following successful in vitro studies, locally injected silk hydrogels loaded with doxorubicin show excellent antitumor response in mice, outperforming the equivalent amount of doxorubicin delivered intravenously. In addition to reducing primary tumor growth, doxorubicin‐loaded silk hydrogels reduce metastatic spread and are well tolerated in vivo. Thus, silk hydrogels are well suited for the local delivery of chemotherapy and provide a promising approach to improve locoregional control of breast cancer.     

High‐Strength and High‐Toughness Double‐Cross‐Linked Cellulose Hydrogels: A New Strategy Using Sequential Chemical and Physical Cross‐Linking

Polysaccharide‐based hydrogels have multiple advantages because of their inherent biocompatibility, biodegradability, and non‐toxicic properties. The feasibility of using polysaccharide‐based hydrogels could be improved if they could simultaneously fulfill the mechanical property and cell compatibility requirements for practical applications. Herein, the construction of double‐cross‐linked (DC) cellulose hydrogels is described using sequential chemical and physical cross‐linking, resulting in DC cellulose hydrogels that are mechanically superior to single‐cross‐linked cellulose hydrogels. The formation and spatial distribution of chemically cross‐linked domains and physically cross‐linked domains within the DC cellulose hydrogels are demonstrated. The molar ratio of epichlorohydrin to anhydroglucose units of cellulose and the concentration of the aqueous ethanol solution are two critical parameters for obtaining mechanically strong and tough DC cellulose hydrogels. The mechanical properties of the DC cellulose hydrogels under loading‐unloading cycles are described using compression and tension models. The possible toughening mechanism of double‐cross‐linking is discussed.     

A Natural Silk Fibroin Protein‐Based Transparent Bio‐Memristor

The recent discovery of nanoelectronics memristor devices has opened up a new wave of enthusiasm and optimism in revolutionizing electronic circuit design, marking the beginning of new era for the advancement of neuromorphic, high‐density logic and memory applications. Here a highly non‐linear dynamic response of a bio‐memristor is demonstrated using natural silk cocoon fibroin protein of silkworm, Bombyx mori. A film that is transparent across most of the visible spectrum is obtained with the electronic‐grade silk fibroin aqueous solution of ca. 2% (wt/v). Bipolar memristive switching is demonstrated; the switching mechanism is confirmed to be the filamentary switching as observed by probing local conduction behavior at nanoscale using scanning tunneling microscopy. The memristive transition is elucidated by a physical model based on the carrier trapping or detrapping in silk fibroin films and this appears to be due to oxidation and reduction procedures, as evidenced from cyclic voltammetry measurements. Hence, silk fibroin protein could be used as a biomaterial for bio‐memristor devices for applications in advanced bio‐inspired very large scale integration circuit design as well as in biologically inspired synapse links for energy‐efficient neuromorphic computing.     

A Thermal‐Reflow‐Based Low‐Temperature,High‐Pressure Sintering of Lyophilized Silk Fibroin for the Fast Fabrication of Biosubstrates

Solid fibroin is a bulk nonporous material that can be prepared with two methods: a liquid–gel–solid transition from a fibroin solution or a sintering procedure starting from silk powder. Both methods have their own disadvantages: the first requires several weeks and the process is size dependent; the second requires high temperatures. To overcome these limitations, a low‐temperature sintering procedure based on a thermal‐reflow is proposed in this work to produce in fast‐fashion monoliths of solid fibroin. Thermal‐reflow is a well‐known mechanism that takes place when the glass transition temperature of the material is lower than the temperature used to process it. Water plays an important role decreasing the glass transition temperature down to 40 °C. For the first time, a thermal reflow is conducted on lyophilized silk fibroin at 40 °C, associating to the water addition a high‐pressure compression. To optimize the process, a full factorial design of experiment is used. The material is then studied in the crucial phases by digital scanning calorimetry, Fourier‐transform infrared spectroscopy, and scanning electron microscopy. Finally, a mechanical characterization and a preliminary in vitro test are conducted.     

Meso‐Functionalization of Silk Fibroin by Upconversion Fluorescence and Near Infrared In Vivo Biosensing

In biomedical applications, it is very desirable to monitor the in vivo state of implanted devices, i.e., tracking the location, the state, and the interaction between the implanted devices and cell tissues. To achieve this goal, a generic strategy of soft materials meso‐functionalization is presented. This is to acquire silk fibroin (SF) materials with added functions, i.e., in vivo bioimaging/sensing. The functionalization is by 3D materials assembly of functional components, lanthanide(Ln)‐doped upconversion nanoparticles (UCNPs) on the mesoscopic scale to acquire upconversion fluorescent emission. To implement the meso‐functionalization, the surfaces of UCNPs are modified by the hydroxyl groups (? OH) from SiO₂ or polyethylene glycol coating layers, which can interact with the carbonyl groups (C?O) in SF scaffolds. The functionalized silk scaffolds are further implanted subcutaneously into mice, which allows the silk scaffolds to have fluorescent in vivo bioimaging and other biomedical functions. This material functionalization strategy may lead to the rational design of biomaterials in a more generic way.     

Scalable High‐Throughput Production of Modular Microgels for In Situ Assembly of Microporous Tissue Scaffolds

Hydrogel scaffolds that template the regeneration of tissue structures are widely explored; however, there is often a trade‐off between material properties, such as stiffness and interconnected pore size, that may be equally important in supporting tissue growth. Microporous annealed particle scaffolds are introduced to address this trade‐off while maintaining a flowable precursor; however, manufacturing throughput, reproducibility, and flexibility of hydrogel microparticle building blocks are limited, hindering widespread adoption. The scalable high‐throughput production of bioactive microgels for the formation of microporous tissue scaffolds in situ is presented. Using a parallelized step emulsification device, scalable high‐throughput generation of monodisperse microgels is achieved. Crosslinking is initiated downstream of droplet generation using pH modulation via proton acceptors dissolved in the oil phase. This approach enables continuous production of microgels for over 12 h while ensuring highly uniform physicochemical properties. Using this platform, the effects of local matrix stiffness on cell growth orthogonal to scaffold porosity are studied. Formation of injectable cell‐laden mechanically heterogeneous microporous scaffolds is also demonstrated. This approach is particularly suited for the formation of modular, multimaterial scaffolds in situ, which could be applied to 3D bioprinting or to form more complex scaffolds to enhance regeneration of irregular wounds.     

Bio‐Orthogonally Crosslinked,Engineered Protein Hydrogels with Tunable Mechanics and Biochemistry for Cell Encapsulation

Covalently‐crosslinked hydrogels are commonly used as 3D matrices for cell culture and transplantation. However, the crosslinking chemistries used to prepare these gels generally cross‐react with functional groups present on the cell surface, potentially leading to cytotoxicity and other undesired effects. Bio‐orthogonal chemistries have been developed that do not react with biologically relevant functional groups, thereby preventing these undesirable side reactions. However, previously developed biomaterials using these chemistries still possess less than ideal properties for cell encapsulation, such as slow gelation kinetics and limited tuning of matrix mechanics and biochemistry. Here, engineered elastin‐like proteins (ELPs) are developed that crosslink via strain‐promoted azide‐alkyne cycloaddition (SPAAC) or Staudinger ligation. The SPAAC‐crosslinked materials form gels within seconds and complete gelation within minutes. These hydrogels support the encapsulation and phenotypic maintenance of human mesenchymal stem cells, human umbilical vein endothelial cells, and murine neural progenitor cells. SPAAC‐ELP gels exhibit independent tuning of stiffness and cell adhesion, with significantly improved cell viability and spreading observed in materials containing a fibronectin‐derived arginine‐glycine‐aspartic acid (RGD) domain. The crosslinking chemistry used permits further material functionalization, even in the presence of cells and serum. These hydrogels are anticipated to be useful in a wide range of applications, including therapeutic cell delivery and bioprinting.     

Bioinspired Structural Composite Hydrogels with a Combination of High Strength,Stiffness, and Toughness

In the development of artificial hydrogels, emulating the mechanical properties of biological tissues with a desirable combination of stiffness and toughness is crucial. To achieve such properties, a design principle inspired by a natural structural composite to wet hydrogels is applied. The bioinspired structural composite hydrogel consisting of layered microplatelets and polymer matrix with strong polymer–platelet interactions is fabricated by a facile method, that is, drying-induced unidirectional shrinkage and rehydration process coupled with secondary ionic crosslinking. The resulting hydrogels exhibit a combination of high tensile strength and elastic modulus (on the order of several MPa) and high fracture energy (up to ≈ 2 kJ·m⁻²). The results suggest the potential of the bioinspired approach that is limitedly applied in dry composites for developing mechanically robust composite hydrogels.     

Self‐Healing Silk Fibroin‐Based Hydrogel for Bone Regeneration: Dynamic Metal‐Ligand Self‐Assembly Approach

Despite advances in the development of silk fibroin (SF)‐based hydrogels, current methods for SF gelation show significant limitations such as lack of reversible crosslinking, use of nonphysiological conditions, and difficulties in controlling gelation time. In the present study, a strategy based on dynamic metal‐ligand coordination chemistry is developed to assemble SF‐based hydrogel under physiological conditions between SF microfibers (mSF) and a polysaccharide binder. The presented SF‐based hydrogel exhibits shear‐thinning and autonomous self‐healing properties, thereby enabling the filling of irregularly shaped tissue defects without gel fragmentation. A biomineralization approach is used to generate calcium phosphate‐coated mSF, which is chelated by bisphosphonate ligands of the binder to form reversible crosslinkages. Robust dually crosslinked (DC) hydrogel is obtained through photopolymerization of acrylamide groups of the binder. DC SF‐based hydrogel supports stem cell proliferation in vitro and accelerates bone regeneration in cranial critical size defects without any additional morphogenes delivered. The developed self‐healing and photopolymerizable SF‐based hydrogel possesses significant potential for bone regeneration application with the advantages of injectability and fit‐to‐shape molding.     

Self‐Healable Multifunctional Electronic Tattoos Based on Silk and Graphene

Electronic tattoos (E‐tattoos), which can be intimately mounted on human skin for noninvasive and high‐fidelity sensing, have attracted the attention of researchers in the field of wearable electronics. However, fabricating E‐tattoos that are capable of self‐healing and sensing multistimuli, similar to the inherent attributes of human skin, is still challenging. Herein, a healable and multifunctional E‐tattoo based on a graphene/silk fibroin/Ca²⁺ (Gr/SF/Ca²⁺) combination is reported. The highly flexible E‐tattoos are prepared through printing or writing using Gr/SF/Ca²⁺ suspension. The graphene flakes distributed in the matrix form an electrically conductive path that is responsive to environmental changes, such as strain, humidity, and temperature variations, endowing the E‐tattoo with high sensitivity to multistimuli. The performance of the E‐tattoo is investigated as a strain, humidity, and temperature sensor that shows high sensitivity, a fast response, and long‐term stability. The E‐tattoo is remarkably healed after damage by water because of the reformation of hydrogen and coordination bonds at the fractured interface. The healing efficiency is 100% in only 0.3 s. Finally, as proof of concept, its applications for monitoring of electrocardiograms, breathing, and temperature are shown. Based on its unique properties and superior performance, the Gr/SF/Ca²⁺ E‐tattoo may be a promising candidate material for epidermal electronics.     

Highly Stretchable,High‐Mobility,Free‐Standing All‐Organic Transistors Modulated by Solid‐State Elastomer Electrolytes

Highly stretchable, high‐mobility, and free‐standing coplanar‐type all‐organic transistors based on deformable solid‐state elastomer electrolytes are demonstrated using ionic thermoplastic polyurethane (i‐TPU), thereby showing high reliability under mechanical stimuli as well as low‐voltage operation. Unlike conventional ionic dielectrics, the i‐TPU electrolyte prepared herein has remarkable characteristics, i.e., a large specific capacitance of 5.5 µF cm^?2, despite the low weight ratio (20 wt%) of the ionic liquid, high transparency, and even stretchability. These i‐TPU‐based organic transistors exhibit a mobility as high as 7.9 cm² V^?1 s^?1, high bendability (R_c, radius of curvature: 7.2 mm), and good stretchability (60% tensile strain). Moreover, they are suitable for low‐voltage operation (V_DS = ?1.0 V, V_GS = ?2.5 V). In addition, the electrical characteristics such as mobility, on‐current, and threshold voltage are maintained even in the concave and convex bending state (bending tensile strain of ≈3.4%), respectively. Finally, free‐standing, fully stretchable, and semi‐transparent coplanar‐type all‐organic transistors can be fabricated by introducing a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonic acid layer as source/drain and gate electrodes, thus achieving low‐voltage operation (V_DS = ?1.5 V, V_GS = ?2.5 V) and an even higher mobility of up to 17.8 cm² V^?1 s^?1. Moreover, these devices withstand stretching up to 80% tensile strain.     

Antibiotic‐Releasing Silk Biomaterials for Infection Prevention and Treatment

Effective treatment of infections in avascular and necrotic tissues can be challenging due to limited penetration into the target tissue and systemic toxicities. Controlled‐release polymer implants have the potential to achieve the high local concentrations needed while also minimizing systemic exposure. Silk biomaterials possess unique characteristics for antibiotic delivery, including biocompatibility, tunable biodegradation, stabilizing effects, water‐based processing, and diverse material formats. The functional release of antibiotics spanning a range of chemical properties from different material formats of silk (films, microspheres, hydrogels, coatings) is reported. The release of penicillin and ampicillin from bulk‐loaded silk films, drug‐loaded silk microspheres suspended in silk hydrogels and bulk‐loaded silk hydrogels is investigated and the in vivo efficacy of the ampicillin‐releasing silk hydrogels is demonstrated in a murine infected‐wound model. Silk sponges with nanofilm coatings are loaded with gentamicin and cefazolin, and release is sustained for 5 and 3 days, respectively. The capability of silk antibiotic carriers to sequester, stabilize, and then release bioactive antibiotics represents a major advantage over implants and pumps based on liquid drug reservoirs, where instability at room or body temperature is limiting. The present studies demonstrate that silk biomaterials represent a novel, customizable antibiotic platform for focal delivery of antibiotics using a range of material formats (injectable to implantable).     

Graphene Oxide Gel‐Derived,Free‐Standing,Hierarchically Porous Carbon for High‐Capacity and High‐Rate Rechargeable Li‐O2 Batteries

Lithium‐oxygen (Li‐O₂) batteries are one of the most promising candidates for high‐energy‐density storage systems. However, the low utilization of porous carbon and the inefficient transport of reactants in the cathode limit terribly the practical capacity and, in particular, the rate capability of state‐of‐the‐art Li‐O₂ batteries. Here, free‐standing, hierarchically porous carbon (FHPC) derived from graphene oxide (GO) gel in nickel foam without any additional binder is synthesized by a facile and effective in situ sol‐gel method, wherein the GO not only acts as a special carbon source, but also provides the framework of a 3D gel; more importantly, the proper acidity via its intrinsic COOH groups guarantees the formation of the whole structure. Interestingly, when employed as a cathode for Li‐O₂ batteries, the capacity reaches 11 060 mA h g^?1 at a current density of 0.2 mA cm^?2 (280 mA g^?1); and, unexpectedly, a high capacity of 2020 mA h g^?1 can be obtained even the current density increases ten times, up to 2 mA cm^?2 (2.8 A g^?1), which is the best rate performance for Li‐O₂ batteries reported to date. This excellent performance is attributed to the synergistic effect of the loose packing of the carbon, the hierarchical porous structure, and the high electronic conductivity of the Ni foam.     

High‐Throughput Combinatorial Optimizations of Perovskite Light‐Emitting Diodes Based on All‐Vacuum Deposition

Light‐emitting diodes (LEDs) based on lead halide perovskites demonstrate outstanding optoelectronic properties and are strong competitors for display and lighting applications. While previous halide perovskite LEDs are mainly produced via solution processing, here an all‐vacuum processing method is employed to construct CsPbBr₃ LEDs because vacuum processing exhibits high reliability and easy integration with existing OLED facilities for mass production. The high‐throughput combinatorial strategies are further adopted to study perovskite composition, annealing temperature, and functional layer thickness, thus significantly speeding up the optimization process. The best rigid device shows a current efficiency (CE) of 4.8 cd A^?1 (EQE of 1.45%) at 2358 cd m^?2, and best flexible device shows a CE of 4.16 cd A^?1 (EQE of 1.37%) at 2012 cd m^?2 with good bending tolerance. Moreover, by choosing NiO_x as the hole‐injection layer, the CE is improved to 10.15 cd A^?1 and EQE is improved to a record of 3.26% for perovskite LEDs produced by vacuum deposition. The time efficient combinatorial approaches can also be applied to optimize other perovskite LEDs.     

A Spider‐Capture‐Silk‐Like Fiber with Extremely High‐Volume Directional Water Collection

A spider web collects water by its capture silk for recovering the daytime‐distorted shape during night through water‐sensitive shape memory effect. This unique smart function and geometrical structure of spider‐capture‐silk inspires the development of artificial fibers with periodic knots for directional water collection with vast potential applications in water scarce regions. Existing such fibers are mainly based on nylon filaments coated with petroleum‐originated synthetic polymer solutions. Distinct from using synthetic materials, an all silk‐protein fiber (ASPF) with periodic knots endows extremely high volume‐to‐mass water collection capability. This fiber has a main body consisting of B. mori degummed silk coated with recombinant engineered major ampullate spidroin 2 of spider dragline silk. It is 252 times lighter than synthetic polymer coated nylon fibers that once was reported to have the highest water collection performance. The ASPF collects a maximum water volume of 6.6 µL and has a 100 times higher water collection efficiency compared to existing best water collection artificial fibers in terms of volume‐to‐mass index at the shortest length (0.8 mm) of three‐phase contact line. Since silkworm silks are available abundantly, effective use of recombinant spidroins tandemly shows great potential for scalability.     

Bioinspired Hierarchically Structured All‐Inorganic Nanocomposites with Significantly Improved Capacitive Performance

Lead‐free dielectric ceramics have been the spotlight in the search for environmentally benign materials for electrostatic energy storage because of the ever‐increasing environmental concerns. However, the inverse correlation between the polarization and dielectric breakdown strength is the major barrier hindering the provision of sufficient energy densities in lead‐free dielectric ceramics and practical applications thereof. Herein, a rational structure design inspired by nature is demonstrated as an effective strategy to overcome these challenges. Bioinspired raspberry‐like hierarchically structured all‐inorganic nanocomposites have been prepared by enclosing microsized BaTiO₃‐Bi(Mg_0.5Zr_0.5)O₃ (BT‐BMZ) relaxor ferroelectrics using core‐shell BT‐BMZ@SiO₂ nanoparticles. The synergistic effects of the bioinspired hierarchical structure and insulating SiO₂ nano‐coating result in significantly improved dielectric breakdown strength and sustained large polarization in the nanocomposites, as corroborated by experimental characterizations and theoretical simulations. As a result, an ultrahigh energy density of 3.41 J cm^?3 and a high efficiency of 85.1%, together with outstanding thermal stability within a broad temperature range, have been simultaneously achieved in the hierarchically structured nanocomposites. This contribution provides a feasible and paradigmatic approach to develop high‐performance dielectrics for electrostatic energy storage applications using bioinspired structure design.