Ultrathin-layered MoS2 hollow nanospheres decorating Ni3S2 nanowires as high effective self-supporting electrode for hydrogen evolution reaction

High-activity and cost-effective transition metal sulfides (TMSs) have attracted tremendous attention as promising catalysts for hydrogen evolution reaction (HER). However, a significant challenge is the simultaneous construction of abundant electrochemical active sites and the fast electronic transmission path to boost a high-efficient HER. Herein, we demonstrate a facile one-step hydrothermal preparation of MoS₂ hollow nanospheres decorating Ni₃S₂ nanowires supported on Ni foam (NF), without any other additional template, surfactant or annealing. In this three-dimensional (3D) heterostructure, the ultrathin-layered MoS₂ hollow nanospheres contribute to the promotion of the total surface area and the electrochemical active sites. Meanwhile, the Ni₃S₂ nanowires are beneficial to the high electrical conductivity. Consequently, the optimized MoS₂/Ni₃S₂/NF-200-24 electrocatalyst presents an extremely superior HER activity to that of individual MoS₂/NF and Ni₃S₂/NF. The HER overpotentials are 85 mV at 10 mA cm⁻² and 189 mV at 100 mA cm⁻², which are also comparable with the state-of-the-art 20% Pt/C/NF electrode at both low and high current.     

Construction of Mo2C/W2C heterogeneous electrocatalyst for efficient hydrogen evolution reaction

Constructing high-performance catalyst for hydrogen evolution reaction (HER) is the effective way to eliminate energy crisis. Reasonable engineering of heterointerfaces can effectively create more active sites and promote electron transfer resulting in improvement in the catalytic activity. In this work, we synthesize the well-defined molybdenum carbides and tungsten carbides nano-heterostructure (Mo₂C/W₂C) by carbonization with CH₄/H₂ at 800 °C showing excellent HER activity, fast kinetics and electrochemical stability in both alkaline and acidic electrolytes. Mo₂C/W₂C requires only 140 and 132 mV overpotentials to reach catalytic current density of 10 mA cm^?2 in 0.5 M H₂SO₄ and 1 M KOH electrolyte, respectively. Tafel slope is as low as 51 and 76 mV dec^?1 in 0.5 M H₂SO₄ and 1 M KOH comparable to the benchmarked Pt/C. Moreover, Mo₂C/W₂C exhibits a superior stability with slight deterioration in HER performance after 5000 potential cycles. This work elucidates that the rational construction of heterointerfaces is favorable for design of efficient non-noble metal electrocatalyst for HER catalysis.     

Engineering biphasic hybrid phosphide nanowires as efficient electrocatalyst for hydrogen evolution reaction: Experimental and theoretical insights

Development of highly efficient and cheap electrocatalysts towards the hydrogen evolution reaction (HER) is of great importance for electrochemical water splitting. Herein, hybrid Cu/NiMo-P nanowires on the copper foam were successfully fabricated via a simple two-step method. The hierarchically structured Cu/NiMo-P exhibits large surface areas and rapid electron transfer ability, leading to enhanced catalytic activity. The as-prepared Cu/NiMo-P electrodes need overpotentials of 34 mV and 130 mV to obtain 10 mA cm^?2 for HER in acidic and alkaline solutions, respectively. Density functional theory (DFT) calculations reveal that the Cu/NiMo-P hybrid has a more thermo-neutral hydrogen adsorption free energy and enhanced charge transfer ability as well.     

Ion exchange synthesis of Fe-doped clustered CoP nanowires as superior electrocatalyst for hydrogen evolution reaction

Green hydrogen production from electrochemical water splitting currently suffers from the key issues of high energy consumption and cost. Herein, we demonstrated the synthesis of highly efficient and stable clustered CoP nanowires electrocatalysts on nickel foam. Moreover, an ion exchange strategy was proposed to precisely control the doping content of iron to further modify the intrinsic electrochemical activity of CoP nanowires. The introduction of iron effectively alters the surface atomic configuration and electronic structure of CoP and increases the active sites, thus accelerating the overall reaction rate and enhancing the catalytic performance. It has been demonstrated that the CoFeP-30-30/NF electrode exhibits platinum-like catalytic activity with only an overpotential of 29.8 mV at 10 mA·cm⁻² and outstanding stability toward hydrogen evolution reaction. The synthetic strategy of CoFeP/NF electrode proposed in this work will significantly promote the development of highly efficient transition metal phosphides electrocatalysts with lower overpotential and better stability.     

Facile synthesis of NiS2 nanowires and its efficient electrocatalytic performance for hydrogen evolution reaction

Recently, the first-row transition metal dichalcogenides MX₂ (M = Fe, Co, Ni; X = S, Se) have been widely reported as promising catalysts for hydrogen evolution reaction (HER) because of its excellent catalytic activity and earth-abundance. The rational nanostructure designs have been proved as an effective way to improve their catalytic performance. However, the reported one dimension (1D) NiS₂ nanowires for HER suffer from a large Tafel slope. Here, we report a facile synthesis of 1D NiS₂ nanowires and its high efficient catalytic activity in HER. This nanowire structure with large surface area and active sites enables highly efficient electrocatalytic performance in HER with a much smaller Tafel slope (83.5 mV/dec) compared to that of bulk NiS₂ (136 mV/dec) as well as long-term stability. Our work builds up a structure–performance relationship and enriches the synthetic strategy to other efficient catalysts such as first-row transition metal dichalcogenides or transition metal phosphide.     

MoS2-graphene-CuNi2S4 nanocomposite an efficient electrocatalyst for the hydrogen evolution reaction

We present a facile methodology for the synthesis of a novel 2D-MoS₂, graphene and CuNi₂S₄ (MoS₂-g-CuNi₂S₄) nanocomposite that displays highly efficient electrocatalytic activity towards the production of hydrogen. The intrinsic hydrogen evolution reaction (HER) activity of MoS₂ nanosheets was significantly enhanced by increasing the affinity of the active edge sites towards H⁺ adsorption using transition metal (Cu and Ni₂) dopants, whilst also increasing the edge sites exposure by anchoring them to a graphene framework. Detailed XPS analysis reveals a higher percentage of surface exposed S at 17.04%, of which 48.83% is metal bonded S (sulfide). The resultant MoS₂-g-CuNi₂S₄ nanocomposites are immobilized upon screen-printed electrodes (SPEs) and exhibit a HER onset potential and Tafel slope value of – 0.05 V (vs. RHE) and 29.3 mV dec⁻¹, respectively. These values are close to that of the polycrystalline Pt electrode (near zero potential (vs. RHE) and 21.0 mV dec⁻¹, respectively) and enhanced over a bare/unmodified SPE (– 0.43 V (vs. RHE) and 149.1 mV dec⁻¹, respectively). Given the efficient, HER activity displayed by the novel MoS₂-g-CuNi₂S₄/SPE electrochemical platform and the comparatively low associated cost of production for this nanocomposite, it has potential to be a cost-effective alternative to Pt within electrolyser technologies.     

Self-standing,hybrid three-dimensional-porous MoS2/Ni3S2 foam electrocatalyst for hydrogen evolution reaction in alkaline medium

Self-standing and hybrid MoS₂/Ni₃S₂ foam is fabricated as electrocatalyst for hydrogen evolution reaction (HER) in alkaline medium. The Ni₃S₂ foam with a unique surface morphology results from the sulfurization of Ni foam showing a truncated-hexagonal stacked sheets morphology. A simple dip coating of MoS₂ on the sulfurized Ni foam results in the formation of self-standing and hybrid electrocatalyst. The electrocatalytic HER performance was evaluated using the standard three-electrode setup in the de-aerated 1 M KOH solution. The electrocatalyst shows an overpotential of 190 mV at ?10 mA/cm² with a Tafel slope of 65.6 mV/dec. An increased surface roughness originated from the unique morphology enhances the HER performance of the electrocatalyst. A density functional approach shows that, the hybrid MoS₂/Ni₃S₂ heterostructure synergistically favors the hydrogen adsorption-desorption steps. The hybrid electrocatalyst shows an excellent stability under the HER condition for 12 h without any performance degradation.     

Ultra-fine Ru nanoparticles decorated V2O3 as a pH-universal electrocatalyst for efficient hydrogen evolution reaction

Developing high-efficiency electrocatalysts viable for pH-universal hydrogen evolution reaction (HER) has attracted great interest because hydrogen is a promising renewable energy carrier for replacing fossil fuels. Herein, we present a facile strategy for fabricating ultra-fine Ru nanoparticles (NPs) decorated V₂O₃ on the carbon cloth substrates as efficient and stable pH-universal catalysts for HER. Benefiting from the metallic property and electronic conductivity of V₂O₃ matrix, the optimized hybrid (Ru/V₂O₃-CC) exhibits excellent HER activities in a wide pH range, achieving lower overpotentials of 184, 219, and 221 mV at 100 mA cm⁻² in 0.5 M H₂SO₄, 1.0 M KOH and 1.0 M phosphate-buffered saline, respectively. Moreover, the electrode remains superior stability with negligible degradation after 5000 cyclic voltammetry scanning whether in acidic, alkaline or neutral media. Experimental results, combined with theoretical calculations, demonstrate that the interaction between Ru NPs and the support V₂O₃ induces the local electronic density diversity, allowing optimization of the adsorption energy of Ru towards hydrogen intermediate H1, thus favoring the HER process.     

Zinc oxide functionalized molybdenum disulfide heterostructures as efficient electrocatalysts for hydrogen evolution reaction

Technology urges to replace the state-of-the-art catalysts such as platinum with low cost, earth abundant and durable electrocatalysts for efficient hydrogen evolution (HER) reaction which is going to become the major sustainable production of energy in future. Herein, we present the heterostructure based MoS₂.ZnO (MZO) heterostructures for successful electrochemical water splitting process. For HER, the prepared MoS₂.ZnO nanocomposites show the over potential as low as 239 mV at cathodic current density 10 mAcm⁻² with an exchange current density of 3.2 μAcm⁻². A Tafel slope of about 62 mV per decade suggested to have the Volmer-Heyrovsky mechanism for the HER process with MoS₂.ZnO nanocomposite as the catalyst. The small Tafel slope indicates a promising electrocatalyst for HER in practical application. The strong interface formation at the MoS₂.ZnO heterostructure facilitates higher catalytic activity and excellent cycling stability. The heterostructure formation based on semiconductor two dimensional (2D) transition metal dichalcogenides (TMDC) open up new avenues for effective manipulation of HER catalysts.     

Quaternary-metal phosphide as electrocatalyst for efficient hydrogen evolution reaction in alkaline solution

Hydrogen evolution reaction (HER) is a critical process in electrocatalytic water splitting for hydrogen production. However, the development of low-cost electrocatalysts for highly efficient HER is still a huge challenge. Hence, we fabricate a multi-metal phosphide on Ni foam, FeCoNiNb_xP, through a facile hydrothermal reaction followed by phosphorization. We find that Nb promotes the formation of metal phosphides, and the main phases of the catalysts with Nb are multiphase phosphides. Importantly, the Nb incorporation significantly improves the HER activity of FeCoNiP. We show that FeCoNiNb_0.3P has the best HER activity, which only requires an overpotential of 78 mV to achieve a current density of 10 mA cm^?2 in 1 M KOH, and demonstrates excellent stability under both constant potential and varied current densities. Our findings show that the multiple-metal compounds are beneficial to the improvement of catalytic activity and provide guidance on the design of novel catalysts for applications.     

Novel one-step synthesis of nickel encapsulated carbon nanotubes as efficient electrocatalyst for hydrogen evolution reaction

In this work, we report the synthesis of Ni nanoparticles encapsulated in carbon nanotubes (CNTs) by a facile and novel one-step pyrolysis method which are obtained from fumaric acid and nickel acetate as carbon and nickel sources respectively. The synthesized Ni encapsulated CNTs were characterized by various methods and were confirmed to possess large surface areas and numerous mesopores, they were applied as non-precious metal electrocatalyst for HER in 1 M KOH solution. The results show that the Ni encapsulated carbon nanotubes synthesized at 650 °C exhibited the best catalytic activity and stability with the smallest Tafel slope of 102 mV dec⁻¹, an onset potential of 110 mV and overpotential of 266 mV to achieve a current density of −10 mA cm⁻².     

Synthesis of Co2FeAl alloys as highly efficient electrocatalysts for alkaline hydrogen evolution reaction

The development of cost-effective non-precious metal electrocatalysts is a major challenge for water splitting applications, but it is important for the realization of renewable energy systems. Alloying has proved an effective way to design metal-based electrocatalysts, and by controlling the annealing temperature, the surface morphology and crystallinity of the alloy can be tuned to control the hydrogen evolution reaction (HER) performance. In this work, with a simple coprecipitation method, we have prepared Co₂FeAl alloys at different annealing temperatures (550 °C–670 °C), which exhibit excellent crystallinity and electrocatalytic performance for HER in alkaline solution. Among all conditions, the Co₂FeAl alloys prepared at 620 °C shows the better crystallinity and the higher purity, and it could achieve a low overpotential of 149 mV at 10 mA cm^?2 in alkaline solution. The overpotential demonstrates persistent stability with only 3 mV change after over 1000 cycles. Both density functional theory (DFT) calculations and experimental results revealed that alloying optimizes the electronic structure near the Fermi surface of the system, improving the electron transport efficiency and enhancing the catalytic activity. These Co₂FeAl alloys are appealing candidates for high-performance alkaline HER electrocatalytic electrodes in water electrolysis due to their outstanding electrocatalytic properties.     

Mixed CoS2@Co3O4 composite material: An efficient nonprecious electrocatalyst for hydrogen evolution reaction

Hydrogen evolution reaction (HER) has been identified as a sustainable and environment friendly technology for a wide range of energy conversion and storage applications. The big barrier in realizing this green technology requires a highly efficient, earth-abundant, and low-cost electrocatalyst for HER. Various HER catalysts have been designed and reported, still, their performance is not up to the mark of Pt. Among them, cobalt-based, especially cobalt disulfide (CoS₂) has shown significant HER activity and found suitable candidature for HER due to its low cost, simple to prepare, and exhibits good stability. Herein, we synthesized various nanostructured materials including pure CoS₂, Co₃O₄ and their composites by wet chemical methods and found them active for HER. The scanning electron microscopy (SEM) has revealed a morphology of composite as a mixture of nanowires and round shape spherical nanoparticles with several microns in dimension. The X-ray diffraction (XRD) confirmed the cubic phase of CoS₂ and cubic phase of Co₃O₄ in the composite materials. The chemical deposition of CoS₂ onto Co₃O₄ has tailored the HER activity of CoS₂@Co₃O₄ composite material. Two CoS₂@Co₃O₄ composite materials were produced with varying amounts of Co₃O₄ and labeled as samples 1 and 2. The Co₃O₄ reduced the adsorption energy for hydrogen, decreased the aggregation of CoS₂ and uplifted the stability of CoS₂@Co₃O₄ a composite material in alkaline media. Sample 1 requires an overpotential of 320 mV to reach a current density of 10 mA/cm² and it exhibits a Tafel slope of 42 mVdec⁻¹which is the key indicator for the fast HER kinetics on sample 1. The sample 1 is highly durable for 50 h and also it has excellent stability. The electrochemical impedance spectroscopy (EIS) revealed a small charge transfer resistance of 28.81 Ohms for the sample 1 with high capacitance double-layer value of 0.81 mF. EIS has supported polarization and Tafel slope results. Based on the partial physical characterization and the electrochemical results, the as-obtained sample 1 (CoS₂@Co₃O₄ composite material) will find potential applications in an extended range of energy conversion and storage devices owing to its low cost, high abundance, and excellent efficiency.     

Facile synthesis of tubular CoP as a high efficient electrocatalyst for pH-universal hydrogen evolution

A facile three-step approach for tubular CoP preparation and its catalytic activity for HER and OER are reported. The CoP microtubes show superior HER performance in a wide pH range with low overpotentials of 91, 101 and 113 mV at 10 mA cm^?2 in 0.5 M H₂SO₄, 1 M KOH and 1 M PBS, respectively. Additionally, it also depicts superior OER performance with an overpotential of 300 mV at 10 mA cm^?2, which is lower than reported precious metal oxides. The improved electrocatalytic performance of tubular CoP is likely attributed to the porous tube-like structural features, which not only afford rich exposed active sites, but also accelerate the charge or mass transfer efficiency, and thus efficiently promote the HER performance. The synthesis of tubular CoP confirms the importance of morphology features and provides a new insight to rationally design and synthesize highly effective non-noble metal phosphide-based pH-universal electrocatalysts for HER.     

In-situ anion exchange synthesis of copper selenide electrode as electrocatalyst for hydrogen evolution reaction

Efficient and robust Earth-abundant catalysts for hydrogen evolution reaction (HER) is one of the key components for clean energy technologies aimed at reducing future carbon emissions. Here, an in-situ anion exchange approach to prepare hierarchical nanostructures consisting of ultrathin Cu_2-xSe nanosheet is reported. With the aid of the selenylation process and the hierarchical ultrathin nanostructure, the nanostructured Cu_2-xSe/Cu foam electrode achieved considerably enhanced HER performance with a large geometric current density of ?100 mA cm^?2 at a small overpotential of 313 mV and outstanding long-term operational stability. Significant improvement of electrocatalytic activity for Cu_2-xSe catalyst could be attributed to the promoted mass diffusion/transfer properties, which results from its special structural feature. Meanwhile, the overpotential associated with the catalyst/substrate interface could be effectively eliminated due to the self-supported construction. We believe that this work will lead towards the further development of Cu-based chalcogenides for applications in electrocatalysis and energy conversion.     

A facile one-pot synthesis of microspherical-shaped CoS2/CNT composite as Pt-free electrocatalyst for efficient hydrogen evolution reaction

Hydrogen evolution reaction has been recognized as a green technology in the field of electrochemical energy conversion and storage devices. Nevertheless, it is necessary task to finding an economical and effective electrocatalysts for HER. Among the different HER catalysts, the cobalt disulfide (CoS₂) showed an excellent HER activity owing to its low cost, easy to synthesize and good stability. Hence, in this work, we prepared a series of CoS₂/CNT composites with different contents CNT from 4 to 12 wt% by a simple one-step hydrothermal method to investigate the influence of CNT on HER activity of CoS₂. The structural and morphological properties of the obtained samples were analyzed through XRD, SEM, HR-TEM, and XPS. The SEM images of CoS₂/CNT composite showed the spherical-shaped CoS₂ covered by the CNT nanostructure. In addition, the electrochemical tests were carried out using 0.5 M H₂SO₄ solution in order to assess their HER activity. The attained electrochemical results showed that the CoS₂/CNT composite with 8% CNT offers an outstanding HER activity with the smallest overpotential of 155 mV at 10 mA cm⁻² and lowest Tafel slope of 59 mV dec⁻¹ when compared with other composites. Also, the optimized CoS₂/CNT composite provided excellent stability in the acidic medium after 1000 cycles. Therefore, the as-synthesized CoS₂/CNT composite will be an efficient, low-cost and Pt-free electrocatalyst for HER application.     

Palladium-coated polyaniline nanofiber electrode as an efficient electrocatalyst for hydrogen evolution reaction

In this study, polyaniline (PANI) with abundant protonated regions was used for the first time as a palladium (Pd) support for enhanced performance in hydrogen evolution reaction (HER). For this purpose, the hierarchical Pd@PANI nanofiber electrode was easily synthesized by electrochemical polymerization of aniline on Au followed by potential-controlled electrochemical deposition of Pd nanoclusters on the PANI. The reported catalyst was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and field-emission scanning electron microscopy. Linear sweep voltammetry analysis was performed to evaluate the HER performance. Ion transfer behavior was investigated using electrochemical impedance spectroscopy analysis. The electrochemical tests show that the Pd@PANI/Au electrode has a low overpotential of ～60 mV at 10 mA cm^?2 and a small Tafel slope of 35 mV dec^?1 for HER in acidic media, with high catalytic activity and stability. These features will make the Pd@PANI/Au a promising candidate as a high-performance electrocatalyst for HER applications.     

High activity PtPd-WC/C electrocatalyst for hydrogen evolution reaction

Pd modified Pt over a novel support of tungsten carbide nanocrystals (the catalyst denotes as PtPd-WC/C) have been prepared by using an intermittent microwave heating (IMH) method. The as-prepared electrocatalysts are characterized by using the techniques of XRD, SEM, TEM, linear sweeping voltammetry and tested for the hydrogen evolution reaction (HER) in the acidic media. It shows a better performance for the HER on PtPd-WC/C electrocatalyst than that on Pt-WC/C electrocatalyst. In addition, these effects on the catalytic activity by changing environmental temperature and electrolyte concentration were taken into account. Kinetic study shows that the HER on the PtPd-WC/C electrocatalyst gives higher exchange current density in H₂SO₄ solution with high concentration, leading to a lower overpotential and facile kinetics. XRD, SEM and TEM images of PtPd-WC/C show the crystalline features of Pt, Pd and tungsten carbides and indicated the coexistence of these components.     

Cu2S/Ni3S2 ultrathin nanosheets on Ni foam as a highly efficient electrocatalyst for oxygen evolution reaction

It is an inevitable choice to find efficient and economically-friendly electrocatalysts to reduce the high overpotential of oxygen evolution reaction (OER), which is the key to improve the energy conversion efficiency of water splitting. Herein, we synthesized Cu₂S/Ni₃S₂ catalysts on nickel foam (NF) with different molar ratios of Ni/Cu by a simple two-step hydrothermal method. Cu₂S/Ni₃S₂-0.5@NF (CS/NS-0.5@NF) effectively reduces the overpotential of OER, displaying small overpotentials (237 mV@100 mA cm^?2 and 280 mV@500 mA cm^?2) in an alkaline solution, along with a low Tafel slope of 44 mV dec^?1. CS/NS-0.5@NF also presents an excellent durability at a relatively high current density of 100 mA cm^?2 for 100 h. The excellent performance is benefited by the prominent structural advantages and desirable compositions. The nanosheet has a high electrochemical active surface area and the porous structure is conducive to electrolyte penetration and product release. This work provides an economically-friendly Cu-based sulfide catalyst for effective electrosynthesis of OER.     

Ru/MoO2 decorated on CNT networks as an efficient electrocatalyst for boosting hydrogen evolution reaction

Generally, electrochemical hydrogen evolution reaction (HER) is hampered by slow kinetics and low round-trip efficiency. Electrocatalysts with a hierarchical structure and large surface area are expected to overcome these problems. Herein, we prepared a Ru/MoO₂/carbon nanotubes (RMC) hybrid with a hierarchical structure by a convenient solid-phase reaction (SPR) method, and studied the electrochemical activity for HER. After annealing as-prepared RuO₂/MoO₂/carbon nanotubes (ROMC) precursor in a tubular furnace under Ar atmosphere, RuO₂ and MoS₂ were in-situ transformed into Ru metal and MoO₂ phase by the redox SPR. Through various tests, we have confirmed that the new formed Ru metal and MoO₂ phase are combined and uniformly coated on the outer surface of CNTs. Interestingly, the RMC-500 exhibits the best HER performance with a low overpotential of 16 mV at l0 mA cm^?2, small Tafel slope of 45 mV dec^?1, higher electrochemical active surface area, and long-time durability in alkaline electrolyte.