Luminescent properties of a novel afterglow phosphor Sr3Al2O5Cl2:Eu,Ce

A series of Eu²⁺ and Ce³⁺ doped/co-doped Sr₃Al₂O₅Cl₂ afterglow phosphors that presented various bright colors were successfully synthesized via high temperature solid state reaction. The structure and luminescence properties of the obtained samples were characterized by X-ray powder diffraction (XRD), photoluminescence (PL) spectra and decay curves as well as the thermoluminescence (TL) glow curves. The XRD results showed that all the phase could be indexed to the orthorhombic structure with the space group P2₁2₁2₁. After being exposed to a 254 nm or 365 nm mercury lamp, blue/yellow-orange afterglow emissions with broad bands peaking around 620 nm/435 nm, which were ascribed to the characteristic 4f⁶5d–4f⁷/5d¹–4f¹ transitions of Eu²⁺/Ce³⁺, could be observed in phosphors of Sr₃Al₂O₅Cl₂:Eu²⁺/Sr₃Al₂O₅Cl₂:Ce³⁺, respectively. Because of the overlap spectral range between the Sr₃Al₂O₅Cl₂:Eu²⁺ and Sr₃Al₂O₅Cl₂:Ce³⁺ phosphors, the energy transfer (ET) from Ce³⁺ to Eu²⁺ occurred. The related ET process was discussed in detail. Moreover, the incorporation of Ce³⁺ could significantly prolong the afterglow duration of Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor, which was due to the increase of trap concentration. Consequently, 6 h of the afterglow duration could be observed in Sr₃Al₂O₅Cl₂:1.0%Eu²⁺, 0.5%Ce³⁺ sample, exhibiting much longer than that of Sr₃Al₂O₅Cl₂: 1.0%Eu²⁺ (3 h). From the afterglow decay curves and the fitting results, the optimal concentration of Ce³⁺ for the enhanced afterglow property was experimentally determined to be 0.5%.     

Functionalized magnetic core-shell Fe3O4@SiO2 nanoparticles as selectivity-enhanced chemosensor for Hg(II)

A colorimetric and ‘‘turn-on” fluorescent chemosensor Rho-Fe₃O₄@SiO₂ for Hg²⁺ in which N-(rhodamine-6G)lactam-ethylenediamine (Rho-en) is conjugated with the magnetic core-shell Fe₃O₄@SiO₂ NPs has been strategically designed and synthesized. The final product was characterized by X-ray power diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectra (FTIR) and UV-visible absorption and fluorescence emission. Fluorescence and UV-visible spectra results showed that the resultant multifunctional nanoparticles Rho-Fe₃O₄@SiO₂ exhibited selective ‘turn-on’ type fluorescent enhancements and distinct color changes with Hg²⁺. The selectivity of the Rho-Fe₃O₄@SiO₂ for Hg(II) ion is better than that of the Rho-en in the same conditions. In addition, the presence of magnetic Fe₃O₄ nanoparticles in the sensor Rho-Fe₃O₄@SiO₂ NPs would also facilitate the magnetic separation of the Hg(II)-Rho-Fe₃O₄@SiO₂ from the solution.     

Decomposition and oxidation of CH3 13CH2OH on A12O3, Pd/Al2O3, and PdO/Al2O3 catalysts

Temperature-programmed desorption (TPD) and oxidation (TPO) were used to investigate the decomposition and oxidation of ethanol on Al₂O₃, Pd/Al₂O₃, and PdO/Al₂O₃. Ethyl--¹³C alcohol (CH₃ ¹³CH₂OH) was adsorbed on the catalysts so that reaction pathways of the two carbons could be distinguished. Alumina was mainly a dehydration catalyst, but dehydrogenation was also observed and some carbon remained on the surface. In the presence of O₂, A1₂O₃ oxidized the decomposition products and the-carbon was oxidized faster. Ethanol, which was adsorbed on A1₂O₃, decomposed much faster on Pd/A1₂O₃ by diffusing to Pd and undergoing CO elimination to form CH₄,¹³CO, H₂, and surface carbon. On PdO/A1₂O₃, the decomposition was slower than on Pd/A1₂O₃ until lattice oxygen was extracted above 450 K; the decomposition products were oxidized by lattice oxygen. In the presence of gas phase O₂, Pd/Al₂O₃ was an active oxidation catalyst at low temperature, but lattice oxygen had to be extracted from PdO/A1₂O₃ before it had significant oxidation activity.     

New Insight into Assembled Fe3O4@PEI@Ag Structure as Acceptable Agent with Enzymatic and Photothermal Properties

Metal-based enzyme mimics are considered to be acceptable agents in terms of their biomedical and biological properties; among them, iron oxides (Fe₃O₄) are treated as basement in fabricating heterogeneous composites through variable valency integrations. In this work, we have established a facile approach for constructing Fe₃O₄@Ag composite through assembling Fe₃O₄ and Ag together via polyethyleneimine ethylenediamine (PEI) linkages. The obtained Fe₃O₄@PEI@Ag structure conveys several hundred nanometers (~150 nm). The absorption peak at 652 nm is utilized for confirming the peroxidase-like activity of Fe₃O₄@PEI@Ag structure by catalyzing 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of H₂O₂. The Michaelis–Menten parameters (K_m) of 1.192 mM and 0.302 mM show the higher catalytic activity and strong affinity toward H₂O₂ and TMB, respectively. The maximum velocity (V_max) value of 1.299 × 10⁻⁷ M∙s⁻¹ and 1.163 × 10⁻⁷ M∙s⁻¹ confirm the efficiency of Fe₃O₄@PEI@Ag structure. The biocompatibility illustrates almost 100% cell viability. Being treated as one simple colorimetric sensor, it shows relative selectivity and sensitivity toward the detection of glucose based on glucose oxidase. By using indocyanine green (ICG) molecule as an additional factor, a remarkable temperature elevation is observed in Fe₃O₄@PEI@Ag@ICG with increments of 21.6 °C, and the absorption peak is nearby 870 nm. This implies that the multifunctional Fe₃O₄@PEI@Ag structure could be an alternative substrate for formatting acceptable agents in biomedicine and biotechnology with enzymatic and photothermal properties.     

Transient and isotopic studies of the oxygen transport and exchange during oxidative coupling of methane on Sr promoted La2O3

Isotopic transient techniques were applied to study oxidative coupling of methane over lanthanum oxide and strontium promoted La₂O₃ catalysts. Results of the¹⁸O₂/¹⁶O₂ isotopic exchange experiments indicate that Sr promotion increases oxygen uptake from the lattice of the catalyst. Oxygen self diffusion coefficients, which were determined for the series of lanthana catalysts, reach a maximum for the 1% Sr/La₂O₃. Steps of¹⁸O₂ in the presence of a steady flow of methane over Sr/La₂O₃ catalysts, indicate that surface and bulk oxygen appear in the reaction products before gas-phase¹⁸O². Steps of CO₂ over catalysts in which lattice oxygen has been exchanged with¹⁸O₂, show that gas/solid exchange involves over 50% of the lattice oxygen. Under reaction conditions, methane pulses with no gas-phase oxygen yield negligible amounts of products which indicates that methane interacts with lattice oxygen only in the presence of the gas-phase oxygen.     

The first cycle characteristics of Li[Ni1/3Co1/3Mn1/3]O2 charged up to 4.7 V

In this research, we studied the first cycle characteristics of Li[Ni_1/3Co_1/3Mn_1/3]O₂ charged up to 4.7 V. Properties, such as valence state of the transition metals and crystallographic features, were analyzed by X-ray absorption spectroscopy and X-ray and neutron diffractions. Especially, two plateaus observed around 3.75 and 4.54 V were investigated by ex situ X-ray absorption spectroscopy. XANES studies showed that the oxidation states of transition metals in Li[Ni_1/3Co_1/3Mn_1/3]O₂ are mostly Ni²⁺, Co³⁺ and Mn⁴⁺. Based on neutron diffraction Rietveld analysis, there is about 6% of all nickel divalent (Ni²⁺) ions mixed with lithium ions (cation mixing). Meanwhile, it was found that the oxidation reaction of Ni²⁺/Ni⁴⁺ is related to the lower plateau around 3.75 V, but that of Co³⁺/Co⁴⁺ seems to occur entire range of x in Li_1−x[Ni_1/3Co_1/3Mn_1/3]O₂. Small volume change during cycling was attributed to the opposite variation of lattice parameter “c” and “a” with charging-discharging.     

Perovskite-type oxide ACo0.8Bi0.2O2.87 (A=La0.8Ba0.2): a catalyst for low-temperature CO oxidation

Perovskite-type oxide ACo_0.8Bi_0.2O_2.87 (A=La_0.8Ba_0.2) has been investigated as a catalyst for the oxidation of carbon monoxide. X-ray diffraction results revealed that the catalyst is single-phase and cubic in structure. The results of chemical analysis indicated that in ACo_0.8Bi_0.2O_2.87, bismuth is pentavalent whereas cobalt is trivalent as well as bivalent; in La_0.8Ba_0.2CoO_2.94, cobalt ions exist as Co³⁺ and Co⁴⁺. The substitution of Bi for Co enhanced the catalytic activity of the perovskite-type oxide significantly. Over the Bi-incorporated catalyst, at equal space velocities and with the rise in CO/O₂ molar ratio, the temperature for 100% CO conversion shifted to a higher range; at a typical space velocity of 30000 h^–1 and a CO/O₂ molar ratio of 0.67/1.00, 100% CO conversion was observed at 250°C. Over ACo_0.8Bi_0.2O_2.87, at equal CO/O₂ molar ratio, the temperature for 100% CO conversion decreased with a drop in space velocity; the lowest being 190°C at a space velocity of 5000 h^–1. The result of O₂-TPD study illustrated that the presence of Bi ions caused the lattice oxygen of La_0.8Ba_0.2CoO_3– to desorb at a lower temperature. The results of TPR, ¹⁸O/¹⁶O isotopic exchange, and CO-pulsing investigations demonstrated that the lattice oxygen of the Bi-doped catalyst is highly mobile.     

Kass-controlled Hg transport from Crystal Violet Lactone to Fluoran

We have investigated the Hg²⁺ transport from Crystal Violet Lactone to Fluoran dye based on the association constant, K_ass. Upon addition of Hg²⁺, the Crystal Violet Lactone shows a new peak at around 603 nm, and the color of the solution changed from colorless to blue. With the addition of Fluoran dye in this solution containing Crystal Violet Lactone and Hg²⁺, the absorption intensity of Fluoran dye at 447 nm and 586 nm was all increased. So the color of solution gradually became black from blue color. From the changes of the ratio A₅₈₆/A₄₄₇, it is apparent that the Hg²⁺ in Crystal Violet Lactone-Hg²⁺ was transported to colored Fluoran. The Hg²⁺ transport from Crystal Violet Lactone to Fluoran dye was also carried out by the calculation of the association constant: the binding ability for the complex formation of Fluoran dye and Crystal Violet Lactone-Hg²⁺ is much greater in CH₃CN solution (K_ass = 3.0 × 10⁴ M⁻¹) than that of the Crystal Violet Lactone with Hg²⁺ (K_ass = 1.2 × 10³ M⁻¹).     

Tunable luminescence properties and efficient energy transfer in Eu,Mn co-doped Ba2MgP4O13

A series of Ba₂Mg_1−xMn_xP₄O₁₃ (x = 0-1.0) and Ba_1.94Eu_0.06Mg_1−xMn_xP₄O₁₃ (x = 0-0.15) phosphors were prepared by conventional solid-state reaction. X-ray powder diffraction (XRD), the photoluminescence spectra, and the decay curves are investigated. XRD analysis shows that the maximum tolerable substitution of Mn²⁺ for Mg is about 50 mol% in Ba₂MgP₄O₁₃. Mn²⁺-singly doped Ba₂MgP₄O₁₃ shows weak red-luminescence peaked at about 615 nm. The Eu²⁺/Mn²⁺ co-doped phosphor emits two distinctive luminescence bands: a blue one centered at 430 nm originating from Eu²⁺ and a broad red-emitting one peaked at 615 nm from Mn²⁺ ions. The luminescence of Mn²⁺ ions can be greatly enhanced with the co-doping of Eu²⁺ in Ba₂MgP₄O₁₃. The efficient energy transfer from Eu²⁺ to Mn²⁺ is verified by the excitation and emission spectra together with the luminescence decay curves. The emission colors could be tuned from the blue to the red-purple and eventually to the deep red. The resonance-type energy transfer via a dipole-quadrupole interaction mechanism is supported by the decay lifetime data. The energy transfer efficiency and the critical distance are calculated and discussed. The temperature dependent luminescence spectra of the Eu²⁺/Mn²⁺ co-doped phosphor show a good thermal stability on quenching effect.     

Direct electron-transfer and electrochemical catalysis of hemoglobin immobilized on mesoporous Al2O3

The direct electrochemistry of hemoglobin (Hb) has been achieved by immobilizing Hb on mesoporous Al₂O₃ (meso-Al₂O₃) film modified glassy carbon (GC) electrode. Meso-Al₂O₃ shows significant promotion to the direct electron-transfer of Hb, thus it exhibits a pair of well defined and quasi-reversible peaks with a formal potential of −0.345 V (vs. SCE). The electron-transfer rate constant (k_s) is estimated to be 3.17 s⁻¹. The immobilized Hb retains its biological activity well and shows high catalytic activity to the reduction of hydrogen peroxide (H₂O₂) and nitrite (NO₂⁻). Under the optimized experimental conditions, the catalytic currents are linear to the concentrations of H₂O₂ and NO₂⁻ in the ranges of 0.195-20.5 μM and 0.2-10 mM, respectively. The corresponding detection limits are 1.95 × 10⁻⁸ M and 3 × 10⁻⁵ M (S/N = 3). The resulting protein electrode has high thermal stability and good reproducibility due to the protection effect of meso-Al₂O₃. Ultraviolet visible (UV-vis) absorption spectra and reflection-absorption infrared (RAIR) spectra display that Hb keeps almost natural structure in the meso-Al₂O₃ film. The N₂ adsorption-desorption experiments show that the pore size of meso-Al₂O₃ is about 14.4 nm, suiting for the encapsulation of Hb (average size: 5.5 nm) well. Therefore, meso-Al₂O₃ is an alternative matrix for protein immobilization and biosensor preparation.     

Synthesis and characterization of ZnxMg1 − xGa2O4:Co fabricated by low-temperature burning method

A series of Zn_xMg_1 − xGa₂O₄:Co²⁺ spinels (x = 0, 0.25, 0.5, 0.75, and 1.0) was successfully produced through low-temperature burning method by using Mg(NO₃)₂·4H₂O, Zn(NO₃)₂·6H₂O, Ga(NO₃)₃·6H₂O, CO(NH₂)₂, NH₄NO₃, and Co(NO₃)₂·6H₂O as raw materials. The product was characterized by X-ray diffraction, transmission electron microscopy, and photoluminescence spectroscopy. The product was not merely a simple mixture of MgGa₂O₄ and ZnGa₂O₄; rather, it formed a solid solution. The lattice constant of Zn_xMg_1 − xGa₂O₄:Co²⁺ (0 ≤ x ≤ 1.0) crystals has a good linear relationship with the doping density, x. The synthesized products have high crystallinities with neat arrays. Based on an analysis of the form and position of the emission spectrum, the strong emission peak around the visible region (670 nm) can be attributed to the energy level transition [⁴T₁(⁴P) → ⁴A₂(⁴F)] of Co²⁺ in the tetrahedron. The weak emission peak in the near-infrared region can be attributed to the energy level transition [⁴T₁(⁴P) → ⁴T₂(⁴F)] of Co²⁺ in the tetrahedron.     

Role of Zeolitic Oxygens During the Decomposition of 15N 2 18 O Over Fe-ferrierite

Isotopic species of dioxygen released during the decomposition of ¹⁵N₂¹⁸O over Fe-ferrierite show that the zeolite oxygens participate in the reaction. While Fe-ferrierite alone does not exchange its oxygens with ¹⁸O₂ below 400 °C, this exchange is very rapid in the mixture of ¹⁸O₂+N₂O. The amount of participating zeolite oxygen (ca. 1–6 per iron atom) is practically the same in the latter case as in the decomposition of ¹⁵N₂¹⁸O. The time dependence of individual dioxygen isotope species released during the ¹⁵N₂¹⁸O decomposition points to the primary release of ¹⁸O₂ which is very rapidly exchanged for the zeolite oxygen by a single-step mechanism.     

TiO2-V2O5纳米纤维光催化氧化烟气中的Hg0

对静电纺丝法制备的TiO₂和TiO₂-V₂O₅纳米纤维进行光催化脱除模拟烟气中Hg⁰的研究。对纳米纤维进行了SEM、TEM、XRD、BET和UV-Vis检测。结果表明TiO₂-V₂O₅纳米纤维为锐钛矿,V₂O₅高度分散在TiO₂中。纤维直径在200 nm左右,由粒径为10 nm左右的微粒组成。掺杂V₂O₅后,纤维的吸光范围扩大,在可见光范围内的吸光度比纯TiO₂时有了很大提高。实验研究了不同光照条件、V₂O₅的掺杂量和循环次数对脱汞的影响,分析了TiO₂-V₂O₅催化脱汞的机理。当V₂O₅的质量含量为3%时,TiO₂-V₂O₅在可见光下的脱汞率可达到66%,比纯TiO₂时的7%有了显著提高;纤维的脱汞性能稳定,多次循环后紫外光和可见光下的脱汞率仍分别保持在80%和65%左右。电子的跃迁和电子、空穴的快速分离是TiO₂-V₂O₅在可见光下脱汞率提高的主要原因。     

A reddish orange stoichiometric phosphor LiEu(PO3)4 for white light-emitting diodes

Stoichiometric phosphors LiGd_1−xEu_x(PO₃)₄(x=0, 0.2, 0.4, 0.6, 0.8, 1.0) were synthesized via traditional solid state reactions. The X-ray powder diffraction measurements show that all prepared samples are isostructural with LiNd(PO₃)₄. Eu³⁺ doped phosphors can emit intense reddish orange light under the excitation of near ultraviolet light from 370 to 410 nm. The strongest two at 591 and 613 nm can be attributed to the transitions from excited state ⁵D₀ to ground states ⁷F₁ and ⁷F₂, respectively. The typical chromaticity coordinates (x=0.620, y=0.368) of Eu³⁺ doped phosphors are in red area. The recorded absorbance spectra indicate that there is effective absorbance in the near UV region for all Eu³⁺ doped samples. Present research indicates that LiGd_1–xEu_x(PO₃)₄ is a promising phosphor for white light-emitting diodes.     

Structural and electrochemical behaviors of metastable Li2/3[Ni1/3Mn2/3]O2 modified by metal element substitution

Layered metastable lithium manganese oxides, Li_2/3[Ni_1/3−xMn_2/3−yM_x+y]O₂ (x = y = 1/36 for M = Al, Co, and Fe and x = 2/36, y = 0 for M = Mg) were prepared by the ion exchange of Li for Na in P2-Na_2/3[Ni_1/3−xMn_2/3−yM_x+y]O₂ precursors. The Al and Co doping produced the T^#2 structure with the space group Cmca. On the other hand, the Fe and Mg doped samples had the O6 structure with space group R-3m. Electron diffraction revealed the 1:2 type ordering within the Ni_1/3−xMn_2/3−yM_x+yO₂ slab. It was found that the stacking sequence and electrochemical performance of the Li cells containing T^#2-Li_2/3[Ni_1/3Mn_2/3]O₂ were affected by the doping with small amounts of Al, Co, Fe, and Mg. The discharge capacity of the Al doped sample was around 200 mAh g⁻¹ in the voltage range between 2.0 and 4.7 V at the current density of 14.4 mA g⁻¹ along with a good capacity retention. Moreover, for the Al and Co doped and undoped oxides, the irreversible phase transition of the T^#2 into the O2 structure was observed during the initial lithium deintercalation.     

Fluorescence improvement of Ba1.3Ca0.7SiO4:Eu,Mn phosphors via Dy addition and their color-tunable properties

A series of novel single-phase white phosphors Ba_1.3Ca_0.69−x−ySiO₄:0.01Eu²⁺,xMn²⁺, yDy³⁺ were synthesized by the solid-state method. The excitation spectra of these phosphors exhibit a broad band in the range of 260–410 nm, which can meet the application requirements for near-UV LED chips (excited at 350–410 nm). The emission spectra consist of two broad bands positioned around 455 nm and 596 nm, which are assigned to 5d→4f transition of Eu²⁺, and ⁴T₁→⁶A₁ transition of Mn²⁺, respectively. The luminescence intensity of phosphors enhances obviously by doping Dy³⁺ ions, and the intensity of two bands reaches an optimum when Dy³⁺ amounts to 2 mol%. In addition, thermoluminescence investigation of phosphor was conducted, getting two shallow trap defects with activation energy of 0.43 eV and 0.45 eV, which demonstrates the energy transfer mechanism of Dy–Eu through the process of hole and electron traps. By precisely tuning the Mn²⁺ content, an optimized white light with color rendering index (CRI) of R_a=84.3%, correlated color temperature (CCT) of T_c=8416 K and CIE chromaticity coordinates of (0.2941, 0.2937) is generated. The phosphor could be a potential white phosphors for near-UV light emitting diodes.     

Characterization and conversion determination of stable PEDOT latex nanoparticles synthesized by emulsion polymerization

In this research, poly(3,4-ethylenedioxythiophene) (PEDOT) latex nanoparticles with good colloidal stability were prepared by emulsion polymerization and the conversions of EDOT were determined. Two kinds of oxidants, Iron(III) p-toluenesulfonate Fe(OTs)₃ and hydrogen peroxide H₂O₂, were introduced to decrease the use of iron salt and therefore reduce the particle coagulation. The ferrous ions (Fe²⁺) produced during the polymerization would be re-oxidized back to the reactive ferric ions (Fe³⁺) with the help of H₂O₂. This cyclic oxidation-reduction process resulted in the sustained regeneration of Fe³⁺ ions and led to a higher conversion. A dark blue PEDOT latex with long-term dispersion stability was obtained when Fe(OTs)₃ and H₂O₂ were added in sequence. The results obtained from dynamic light scattering and TEM measurements showed that the sizes of nanoparticles were around 100 nm. To determine the conversion of EDOT, two methods (gravimetric analysis and UV-visible method) were used and compared. For the first time, the UV-visible method was established to quantitatively determine the conversion of EDOT monomer. From the measurement, the conversion of EDOT in this system was determined as 74-75%. The PEDOT film prepared by drying the latex solution had conductivity up to 6.3 S/cm.     

Li-intercalation behaviour of vanadium oxide thin film prepared by thermal oxidation of vanadium metal

In order to produce thin films of crystalline V₂O₅, vanadium metal was thermally oxidised at 500 °C under oxygen pressures between 250 and 1000 mbar for 1-5 min. The oxide films were characterised by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), X-ray diffraction (XRD) and Rutherford backscattering spectrometry (RBS). The lithium intercalation performance of the oxide films was investigated by cyclic voltammetry (CV), chronopotentiometry and electrochemical impedance spectroscopy (EIS). It was shown that the composition, the crystallinity and the related lithium intercalation properties of the thin oxide films were critically dependent on the oxidation conditions. The formation of crystalline V₂O₅ films was stimulated by higher oxygen pressure and longer oxidation time. Exposure for 5 min at 750 mbar O₂ at 500 °C resulted in a surface oxide film composed of V₂O_5, and consisting of crystallites up to 200 nm in lateral size. The thickness of the layer was about 100 nm. This V₂O₅ oxide film was found to have good cycling performance in a potential window between 3.8 and 2.8 V, with a stable capacity of 117 ± 10 mAh/g at an applied current density of 3.4 μA/cm². The diffusion coefficients corresponding to the two plateaus at 3.4 and 3.2 V were determined from the impedance measurements to (5.2 and 3.0) × 10⁻¹³ cm² s⁻¹, respectively. Beneath the V₂O₅ layer, lower oxides (mainly VO₂) were found close to the metal. At lower oxygen pressure and shorter exposure times, the oxide films were less crystalline and the amount of V⁴⁺ increased in the surface oxide film, as revealed by XPS. At intermediate oxygen pressures and exposure times a mixture of crystalline V₂O₅ and V₆O₁₃ was found in the oxide film.     

The photocatalytic reduction of nitrous oxide with propane on lead(II) ion-exchanged ZSM-5 catalysts

UV irradiation of the Pb²⁺/ZSM-5 catalyst prepared by an ion-exchange method in the presence of N₂O leads to the decomposition of N₂O into N₂. This reaction is found to be dramatically enhanced by the addition of propane to produce N₂ and oxygen-containing compounds such as ethanol or acetone. UV light effective for the reaction lies in wavelength regions shorter than 250 nm where the absorption band of the Pb²⁺ ion ([Xe] 4f¹⁴5d¹⁰6s² [Xe] 4f¹⁴5d¹⁰6s¹6p¹) exists, indicating that the excited state of the isolated Pb²⁺ ions plays a significant role in this decomposition of N₂O both in the absence and the presence of propane, and the role of propane is found to be a capture of oxygen atoms formed by the decomposition of N₂O.