Enhanced Regeneration of Vascularized Adipose Tissue with Dual 3D-Printed Elastic Polymer/dECM Hydrogel Complex

A flexible and bioactive scaffold for adipose tissue engineering was fabricated and evaluated by dual nozzle three-dimensional printing. A highly elastic poly (L-lactide-co-ε-caprolactone) (PLCL) copolymer, which acted as the main scaffolding, and human adipose tissue derived decellularized extracellular matrix (dECM) hydrogels were used as the printing inks to form the scaffolds. To prepare the three-dimensional (3D) scaffolds, the PLCL co-polymer was printed with a hot melting extruder system while retaining its physical character, similar to adipose tissue, which is beneficial for regeneration. Moreover, to promote adipogenic differentiation and angiogenesis, adipose tissue-derived dECM was used. To optimize the printability of the hydrogel inks, a mixture of collagen type I and dECM hydrogels was used. Furthermore, we examined the adipose tissue formation and angiogenesis of the PLCL/dECM complex scaffold. From in vivo experiments, it was observed that the matured adipose-like tissue structures were abundant, and the number of matured capillaries was remarkably higher in the hydrogel–PLCL group than in the PLCL-only group. Moreover, a higher expression of M2 macrophages, which are known to be involved in the remodeling and regeneration of tissues, was detected in the hydrogel–PLCL group by immunofluorescence analysis. Based on these results, we suggest that our PLCL/dECM fabricated by a dual 3D printing system will be useful for the treatment of large volume fat tissue regeneration.     

Fabrication of 3D melt electrowritting multiphasic scaffold with bioactive and osteoconductivite functionalities for periodontal regeneration

This work aimed to design a multifunctional biphasic 3D scaffold for periodontal tissue regeneration. A 3D fibrous scaffold made from medical-grade poly (ε-caprolactone) (PCL) with high porosity (>90%) and well-oriented fibres was fabricated by a custom design melt electrowriting (MEW) device. A biomimetic process was employed to form a bioactive calcium phosphate (CaP) layer with nanostructure (nanoflakes-like) morphology onto the 3D MEW fibrous surface to stimulate rapid bone formation. Primary human osteoblasts (hOBs) were seeded within the coated 3D fibrous scaffolds for 28 days to acquire the bone compartment of the tissue-engineered construct (TEC). The biphasic construct was obtained by placing an established in vitro periodontal ligament (PDL) cell sheet onto the surface of the bone compartment. Subsequently, a decellularized multiphasic TEC by exploiting a lyophilization approach was obtained. Laser scanning confocal microscopy and scanning electron microscopy confirmed the retention of a functional extracellular matrix within the PDL and bone compartments following scaffold decellularization and lyophilization processes. These findings suggest that lyophilized decellularized biphasic 3D constructs with high porosity constitute a viable ‘off the shelf’ strategy for developing an extracellular matrix-based product to facilitate periodontal regeneration.     

Ultrasonographic and Histological Correlation after Experimental Reconstruction of a Volumetric Muscle Loss Injury with Adipose Tissue

Different types of scaffolds are used to reconstruct muscle volume loss injuries. In this experimental study, we correlated ultrasound observations with histological findings in a muscle volume loss injury reconstructed with autologous adipose tissue. The outcome is compared with decellularized and porous matrix implants. Autologous adipose tissue, decellularized matrix, and a porous collagen matrix were implanted in volumetric muscle loss (VML) injuries generated on the anterior tibial muscles of Wistar rats. Sixty days after implantation, ultrasound findings were compared with histological and histomorphometric analysis. The muscles with an autologous adipose tissue implant exhibited an ultrasound pattern that was quite similar to that of the regenerative control muscles. From a histological point of view, the defects had been occupied by newly formed muscle tissue with certain structural abnormalities that would explain the differences between the ultrasound patterns of the normal control muscles and the regenerated ones. While the decellularized muscle matrix implant resulted in fibrosis and an inflammatory response, the porous collagen matrix implant was replaced by regenerative muscle fibers with neurogenic atrophy and fibrosis. In both cases, the ultrasound images reflected echogenic, echotextural, and vascular changes compatible with the histological findings of failed muscle regeneration. The ultrasound analysis confirmed the histological findings observed in the VML injuries reconstructed by autologous adipose tissue implantation. Ultrasound can be a useful tool for evaluating the structure of muscles reconstructed through tissue engineering.     

Dual Delivery of BMP-2 and bFGF from a New Nano-Composite Scaffold,Loaded with Vascular Stents for Large-Size Mandibular Defect Regeneration

The aim of this study was to investigate the feasibility and advantages of the dual delivery of bone morphogenetic protein-2 (BMP-2) and basic fibroblast growth factor (bFGF) from nano-composite scaffolds (PLGA/PCL/nHA) loaded with vascular stents (PLCL/Col/nHA) for large bone defect regeneration in rabbit mandibles. Thirty-six large bone defects were repaired in rabbits using engineering bone composed of allogeneic bone marrow mesenchymal stem cells (BMSCs), bFGF, BMP-2 and scaffolds composed of PLGA/PCL/nHA loaded with PLCL/Col/nHA. The experiments were divided into six groups: BMSCs/bFGF/BMP-2/scaffold, BMSCs/BMP-2/scaffold, BMSCs/bFGF/scaffold, BMSCs/scaffold, scaffold alone and no treatment. Sodium alginate hydrogel was used as the carrier for BMP-2 and bFGF and its features, including gelling, degradation and controlled release properties, was detected by the determination of gelation and degradation time coupled with a controlled release study of bovine serum albumin (BSA). AlamarBlue assay and alkaline phosphatase (ALP) activity were used to evaluate the proliferation and osteogenic differentiation of BMSCs in different groups. X-ray and histological examinations of the samples were performed after 4 and 12 weeks post-implantation to clarify new bone formation in the mandible defects. The results verified that the use of sodium alginate hydrogel as a controlled release carrier has good sustained release ability, and the combined application of bFGF and BMP-2 could significantly promote the proliferation and osteogenic differentiation of BMSCs (p < 0.05 or p < 0.01). In addition, X-ray and histological examinations of the samples exhibited that the dual release group had significantly higher bone formation than the other groups. The above results indicate that the delivery of both growth factors could enhance new bone formation and vascularization compared with delivery of BMP-2 or bFGF alone, and may supply a promising way of repairing large bone defects in bone tissue engineering.     

Highly Organized Porous Gelatin-Based Scaffold by Microfluidic 3D-Foaming Technology and Dynamic Culture for Cartilage Tissue Engineering

A gelatin-based hydrogel scaffold with highly uniform pore size and biocompatibility was fabricated for cartilage tissue engineering using microfluidic 3D-foaming technology. Mainly, bubbles with different diameters, such as 100 μm and 160 μm, were produced by introducing an optimized nitrogen gas and gelatin solution at an optimized flow rate, and N₂/gelatin bubbles were formed. Furthermore, a cross-linking agent (1-ethyl-3-(3-dimethyl aminopropyl)-carbodiimide, EDC) was employed for the cross-linking reaction of the gelatin-based hydrogel scaffold with uniform bubbles, and then the interface between the close cells were broken by degassing. The pore uniformity of the gelatin-based hydrogel scaffolds was confirmed by use of a bright field microscope, conjugate focus microscope and scanning electron microscope. The in vitro degradation rate, mechanical properties, and swelling rate of gelatin-based hydrogel scaffolds with highly uniform pore size were studied. Rabbit knee cartilage was cultured, and its extracellular matrix content was analyzed. Histological analysis and immunofluorescence staining were employed to confirm the activity of the rabbit knee chondrocytes. The chondrocytes were seeded into the resulting 3D porous gelatin-based hydrogel scaffolds. The growth conditions of the chondrocyte culture on the resulting 3D porous gelatin-based hydrogel scaffolds were evaluated by MTT analysis, live/dead cell activity analysis, and extracellular matrix content analysis. Additionally, a dynamic culture of cartilage tissue was performed, and the expression of cartilage-specific proteins within the culture time was studied by immunofluorescence staining analysis. The gelatin-based hydrogel scaffold encouraged chondrocyte proliferation, promoting the expression of collagen type II, aggrecan, and sox9 while retaining the structural stability and durability of the cartilage after dynamic compression and promoting cartilage repair.     

Nanoengineered biocomposite tricomponent polymer based matrices for bone tissue engineering

Nanoengineered biodegradable constructs based on synthetic and natural polymers enriched with hydroxyapatite (HA) nanoparticles have been found to mimic the extracellular matrix of bone tissue. The main objective of this study was to create biocomposite nanostructured scaffolds by incorporating collagen and HA nanoparticles into poly(L-lactic acid)-co-poly(?-caprolactone) by electrospinning. The fiber diameter of the composite PLCL/Col and PLCL/Col/HA fibers was smaller compared to PLCL. In vitro biocompatibility of the scaffolds studied using human fetal osteoblasts and EDX analysis showed high deposition of calcium on PLCL/Col/HA. The results shows that PLCL/Col/HA nanofibrous constructs have huge potential as substrates for bone regeneration.     

Preparation and characterization of new nano-composite scaffolds loaded with vascular stents

In this study, vascular stents were fabricated from poly (lactide-ɛ-caprolactone)/collagen/nano-hydroxyapatite (PLCL/Col/nHA) by electrospinning, and the surface morphology and breaking strength were observed or measured through scanning electron microscopy and tensile tests. The anti-clotting properties of stents were evaluated for anticoagulation surfaces modified by the electrostatic layer-by-layer self-assembly technique. In addition, nano-composite scaffolds of poly (lactic-co-glycolic acid)/polycaprolactone/nano-hydroxyapatite (PLGA/PCL/nHA) loaded with the vascular stents were prepared by thermoforming-particle leaching and their basic performance and osteogenesis were tested in vitro and in vivo. The results show that the PLCL/Col/nHA stents and PLGA/PCL/nHA nano-composite scaffolds had good surface structures, mechanical properties, biocompatibility and could guide bone regeneration. These may provide a new way to build vascularized-tissue engineered bone to repair large bone defects in bone tissue engineering.     

Anisotropic Chitosan Scaffolds Generated by Electrostatic Flocking Combined with Alginate Hydrogel Support Chondrogenic Differentiation

The replacement of damaged or degenerated articular cartilage tissue remains a challenge, as this non-vascularized tissue has a very limited self-healing capacity. Therefore, tissue engineering (TE) of cartilage is a promising treatment option. Although significant progress has been made in recent years, there is still a lack of scaffolds that ensure the formation of functional cartilage tissue while meeting the mechanical requirements for chondrogenic TE. In this article, we report the application of flock technology, a common process in the modern textile industry, to produce flock scaffolds made of chitosan (a biodegradable and biocompatible biopolymer) for chondrogenic TE. By combining an alginate hydrogel with a chitosan flock scaffold (CFS+ALG), a fiber-reinforced hydrogel with anisotropic properties was developed to support chondrogenic differentiation of embedded human chondrocytes. Pure alginate hydrogels (ALG) and pure chitosan flock scaffolds (CFS) were studied as controls. Morphology of primary human chondrocytes analyzed by cLSM and SEM showed a round, chondrogenic phenotype in CFS+ALG and ALG after 21 days of differentiation, whereas chondrocytes on CFS formed spheroids. The compressive strength of CFS+ALG was higher than the compressive strength of ALG and CFS alone. Chondrocytes embedded in CFS+ALG showed gene expression of chondrogenic markers (COL II, COMP, ACAN), the highest collagen II/I ratio, and production of the typical extracellular matrix such as sGAG and collagen II. The combination of alginate hydrogel with chitosan flock scaffolds resulted in a scaffold with anisotropic structure, good mechanical properties, elasticity, and porosity that supported chondrogenic differentiation of inserted human chondrocytes and expression of chondrogenic markers and typical extracellular matrix.     

Application of strontium doped calcium polyphosphate bioceramic as scaffolds for bone tissue engineering

The critical success factors for bone tissue engineering in clinical applications are scaffolds. Ion doping is one of the most important methods to modify the properties of bioceramics for better angiogenesis abilities, biomechanical properties, and biocompatibility. This paper presents a novel ion doping method applied in calcium polyphosphate (CPP)-based bioceramic scaffolds substituted by strontium ions to form (SCPP) scaffolds for bone tissue regeneration. The microstructure and crystallization of the scaffolds were detected by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Degradation tests were assessed to evaluate the mechanical and chemical stabilities of SCPP in vitro. The cell biocompatibility was measured with respect to the cytotoxicity of the extractions of scaffolds. Bone implantation was performed to evaluate the biodegradability and osteoconductivity of the scaffolds, and the bone formation examined by using X-ray radiography. The results indicated that the obtained SCPP scaffolds had a single CPP phase. The SCPP scaffolds yielded a better degradation property than the pure CPP scaffold. The MTT assay and in vivo results reveal that the SCPP scaffolds exhibited a better cell biocompatibility and tissue biocompatibility than CPP and hydroxyapatite (HA) scaffolds. The in vivo immunohistochemistry staining for VEGF also showed that SCPP had a potential to promote the formation of angiogenesis and the regeneration of bone. SCPP scaffold could serve as a potential biomaterial with stimulating angiogenesis in bone tissue engineering and bone repair.     

Osteogenesis of 3D-Printed PCL/TCP/bdECM Scaffold Using Adipose-Derived Stem Cells Aggregates; An Experimental Study in the Canine Mandible

Three-dimensional (3D) printing is perceived as an innovative tool for change in tissue engineering and regenerative medicine based on research outcomes on the development of artificial organs and tissues. With advances in such technology, research is underway into 3D-printed artificial scaffolds for tissue recovery and regeneration. In this study, we fabricated artificial scaffolds by coating bone demineralized and decellularized extracellular matrix (bdECM) onto existing 3D-printed polycaprolactone/tricalcium phosphate (PCL/TCP) to enhance osteoconductivity and osteoinductivity. After injecting adipose-derived stem cells (ADSCs) in an aggregate form found to be effective in previous studies, we examined the effects of the scaffold on ossification during mandibular reconstruction in beagle dogs. Ten beagles were divided into two groups: group A (PCL/TCP/bdECM + ADSC injection; n = 5) and group B (PCL/TCP/bdECM; n = 5). The results were analyzed four and eight weeks after intervention. Computed tomography (CT) findings showed that group A had more diffuse osteoblast tissue than group B. Evidence of infection or immune rejection was not detected following histological examination. Goldner trichrome (G/T) staining revealed rich ossification in scaffold pores. ColI, Osteocalcin, and Runx2 gene expressions were determined using real-time polymerase chain reaction. Group A showed greater expression of these genes. Through Western blotting, group A showed a greater expression of genes that encode ColI, Osteocalcin, and Runx2 proteins. In conclusion, intervention group A, in which the beagles received the additional ADSC injection together with the 3D-printed PCL/TCP coated with bdECM, showed improved mandibular ossification in and around the pores of the scaffold.     

Interaction of human smooth muscle cells on random and aligned nanofibrous scaffolds of PHBV and PHBV-gelatin

Tissue-engineered scaffolds with nanofibrous morphology have been shown to be effective in regeneration of tissues because nanofibers mimic the native architecture of the extracellular matrix. The unique alignment in the native tissue motivated the authors to fabricate aligned nanofibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and PHBV-gelatin. The in vitro potential of the scaffolds was evaluated using human smooth muscle cells. MTS study confirmed that PHBV aligned nanofibrous scaffold promotes better cell proliferation as well as gene expression of key contractile and extracellular matrix markers than their PHBV-gelatin counterparts. Hence, the PHBV aligned nanofibers can be used as a biomimetic scaffold for the regeneration of esophagus. Electrospinning system for aligned nanofibers fabrication (A) and interaction of human smooth muscle cells on aligned nanofibers (B).     

Decellularized Human Skeletal Muscle as Biologic Scaffold for Reconstructive Surgery

Engineered skeletal muscle tissues have been proposed as potential solutions for volumetric muscle losses, and biologic scaffolds have been obtained by decellularization of animal skeletal muscles. The aim of the present work was to analyse the characteristics of a biologic scaffold obtained by decellularization of human skeletal muscles (also through comparison with rats and rabbits) and to evaluate its integration capability in a rabbit model with an abdominal wall defect. Rat, rabbit and human muscle samples were alternatively decellularized with two protocols: n.1, involving sodium deoxycholate and DNase I; n.2, trypsin-EDTA and Triton X-NH₄OH. Protocol 2 proved more effective, removing all cellular material and maintaining the three-dimensional networks of collagen and elastic fibers. Ultrastructural analyses with transmission and scanning electron microscopy confirmed the preservation of collagen, elastic fibres, glycosaminoglycans and proteoglycans. Implantation of human scaffolds in rabbits gave good results in terms of integration, although recellularization by muscle cells was not completely achieved. In conclusion, human skeletal muscles may be effectively decellularized to obtain scaffolds preserving the architecture of the extracellular matrix and showing mechanical properties suitable for implantation/integration. Further analyses will be necessary to verify the suitability of these scaffolds for in vitro recolonization by autologous cells before in vivo implantation.     

Preparation of elastic chitosan/poly(<Emphasis Type="SmallCaps">l</Emphasis>-lactide-co-ε-caprolactone) macroporous scaffolds by acetylation and particulate leaching

For soft tissue engineering applications, 3-D macroporous acetylated chitosan/poly(l-lactideco-ε-caprolactone) (PLCL) scaffolds were prepared by acetylation and particulate leaching using sodium acetate in an acidic water/dioxane solution. Acetylated 5 wt% chitosan/PLCL scaffold of 90% porosity was determined and confirmed through various tests. The physiochemical properties of acetylated chitosan/PLCL hybrid scaffolds were examined by measuring water contact angles, pore morphology and interconnectivity using scanning electron microscopy (SEM), and dye release testing. In addition, mechanical properties such as tensile strength and bending stress recovery for determining the elasticity of scaffolds were measured. The fibroblast cell line NIH-3T3 was used to test relative cell affinities for the acetylated chitosan/PLCL vs. normal chitosan/PLCL films and porous scaffolds. The acetylated chitosan/PLCL films and scaffolds showed a high initial cell adhesion after 4 h of cell culture and increased cell proliferation compared to that of the control. The acetylated chitosan/PLCL scaffolds produced by particulate leaching showed a highly porous structure and improved the biocompatibility and stability of chitosan compared to that of chitosan-coated PLCL scaffolds. Thus, these scaffolds may be very useful for a variety of tissue engineering applications.     

A Decellularized Human Limbal Scaffold for Limbal Stem Cell Niche Reconstruction

The transplantation of ex vivo expanded limbal epithelial progenitor cells (LEPCs) on amniotic membrane or fibrin gel is an established therapeutic strategy to regenerate the damaged corneal surface in patients with limbal stem cell deficiency (LSCD), but the long-term success rate is restricted. A scaffold with niche-specific structure and extracellular matrix (ECM) composition might have the advantage to improve long-term clinical outcomes, in particular for patients with severe damage or complete loss of the limbal niche tissue structure. Therefore, we evaluated the decellularized human limbus (DHL) as a biomimetic scaffold for the transplantation of LEPCs. Corneoscleral tissue was decellularized by sodium deoxycholate and deoxyribonuclease I in the presence or absence of dextran. We evaluated the efficiency of decellularization and its effects on the ultrastructure and ECM composition of the human corneal limbus. The recellularization of these scaffolds was studied by plating cultured LEPCs and limbal melanocytes (LMs) or by allowing cells to migrate from the host tissue following a lamellar transplantation ex vivo. Our decellularization protocol rapidly and effectively removed cellular and nuclear material while preserving the native ECM composition. In vitro recellularization by LEPCs and LMs demonstrated the good biocompatibility of the DHL and intrastromal invasion of LEPCs. Ex vivo transplantation of DHL revealed complete epithelialization as well as melanocytic and stromal repopulation from the host tissue. Thus, the generated DHL scaffold could be a promising biological material as a carrier for the transplantation of LEPCs to treat LSCD.     

Hyaluronan and fibrin biomaterial as scaffolds for neuronal differentiation of adult stem cells derived from adipose tissue and skin

Recently, we have described a simple protocol to obtain an enriched culture of adult stem cells organized in neurospheres from two post-natal tissues: skin and adipose tissue. Due to their possible application in neuronal tissue regeneration, here we tested two kinds of scaffold well known in tissue engineering application: hyaluronan based membranes and fibrin-glue meshes. Neurospheres from skin and adipose tissue were seeded onto two scaffold types: hyaluronan based membrane and fibrin-glue meshes. Neurospheres were then induced to acquire a glial and neuronal-like phenotype. Gene expression, morphological feature and chromosomal imbalance (kariotype) were analyzed and compared. Adipose and skin derived neurospheres are able to grow well and to differentiate into glial/neuron cells without any chromosomal imbalance in both scaffolds. Adult cells are able to express typical cell surface markers such as S100; GFAP; nestin; βIII tubulin; CNPase. In summary, we have demonstrated that neurospheres isolated from skin and adipose tissues are able to differentiate in glial/neuron-like cells, without any chromosomal imbalance in two scaffold types, useful for tissue engineering application: hyaluronan based membrane and fibrin-glue meshes.     

Small-Diameter PLCL/PCL Nanofiber Grafted TSF Vascular Scaffolds with a Double-Layer Structure for Vascular Tissue Engineering

Successful construction of small-diameter double-layer vascular scaffolds (SDVSs) whose inner diameters are less than 1.5 mm, especially those with multilayer mimic structures, remains a challenge in vascular tissue engineering. In this study, poly(_L-lactide-co-caprolactone) (PLCL)/poly(Ɛ-caprolactone) (PCL)/tussah silk fibroin (TSF) SDVSs with a double-layer structure are prepared by one-step method based on friction twisting core-spun electrospinning technology. The constructed PLCL/PCL SDVSs grafted TSF have an obvious double-layer structure; tube wall thickness 524 ± 28 µm; and inner tube diameter 1390 ± 40 µm. Compared with traditional nanofiber vascular scaffolds (TS), the axial and radial tensile strengths of PLCL/PCL SDVSs grafted TSF increase by 86% and 34%, respectively. They also show good scaffold elastic recovery and burst pressure (BP) (8505 ± 875 mmHg). Compared with the PLCL/PCL SDVSs, the inner and outer layers of PLCL/PCL SDVSs grafted TSF show good hydrophilicity and protein adsorption performance. The in vitro cell viability results indicate that the inner and outer layers of PLCL/PCL SDVSs grafted TSF show enhanced proliferation and adhesion of vein endothelial cells (VECs) and smooth muscle cells (SMCs), respectively. Therefore, the successful preparation of PLCL/PCL SDVSs grafted TSF provides more possibilities for the clinical transplantation of small-diameter vascular scaffolds.     

Silk Fiber-Reinforced Hyaluronic Acid-Based Hydrogel for Cartilage Tissue Engineering

A continuing challenge in cartilage tissue engineering for cartilage regeneration is the creation of a suitable synthetic microenvironment for chondrocytes and tissue regeneration. The aim of this study was to develop a highly tunable hybrid scaffold based on a silk fibroin matrix (SM) and a hyaluronic acid (HA) hydrogel. Human articular chondrocytes were embedded in a porous 3-dimensional SM, before infiltration with tyramine modified HA hydrogel. Scaffolds were cultured in chondropermissive medium with and without TGF-β1. Cell viability and cell distribution were assessed using CellTiter-Blue assay and Live/Dead staining. Chondrogenic marker expression was detected using qPCR. Biosynthesis of matrix compounds was analyzed by dimethylmethylene blue assay and immuno-histology. Differences in biomaterial stiffness and stress relaxation were characterized using a one-step unconfined compression test. Cell morphology was investigated by scanning electron microscopy. Hybrid scaffold revealed superior chondro-inductive and biomechanical properties compared to sole SM. The presence of HA and TGF-β1 increased chondrogenic marker gene expression and matrix deposition. Hybrid scaffolds offer cytocompatible and highly tunable properties as cell-carrier systems, as well as favorable biomechanical properties.     

Chemically crosslinked gelatin hydrogels as scaffolding materials for adipose tissue engineering

The design of scaffolding materials that mimic the properties of the target tissue to be regenerated is a mandatory requirement to engineer a successful scaffold; however, the heterogeneous properties of adipose tissue (AT), strictly dependent on the AT depot, are often underestimated when engineering AT scaffolds. Moreover, a scaffolding material with versatile properties, suitable for the regeneration of different AT depots, is currently missing. Chemically crosslinked gelatin hydrogels are here prepared, and their properties tuned by varying gelatin concentration and reaction stoichiometry to obtain hydrogels suitable for AT regeneration. All hydrogel formulations are stable in water at 37 °C, showing swelling behavior dependent on synthesis parameters. The mechanical compressive response mimics the viscoelastic response typical of native AT, with elastic modulus values covering the range of breast and heel pad AT. The rheological properties vary among the hydrogel formulations, showing a typical shear thinning response, comparable to other AT scaffolds described in literature. In vitro cytotoxicity tests using 3T3-L1 preadipocytes show no cytotoxic effects up to 7 days. 3T3-L1 cells seeded on the hydrogels show good adhesion, proliferation, and adipogenic differentiation, confirmed by an increase in peroxisome proliferator-activated receptor gamma gene expression and lipid droplets accumulation observed by Oil Red O staining. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47104.     

Polymers used to influence cell fate in 3D geometry: New trends

The extracellular matrix (ECM) is a hydrogel-like structure comprised of several different biopolymers, encompassing a wide range of biological, chemical, and mechanical properties. The composition, organization, and assembly of the ECM play a critical role in cell function. Cellular behavior is guided by interactions that occur between cells and their local microenvironment, and this interrelationship plays a significant role in determining physiological functions. Bioengineering approaches have been developed to mimic native tissue microenvironments by fabricating novel bioactive hydrogel scaffolds. This review explores material designs and fabrication approaches that are guiding the design of hydrogels as tissue engineered scaffolds. As the fundamental biology of the cellular microenvironment is often the inspiration for material design, the review focuses on modifications to control bioactive cues such as adhesion molecules and growth factors, and summarizes the current applications of biomimetic scaffolds that have been used in vitro as well as in vivo.     

Fabrication and characterization of poly(ε-caprolactone)/gelatin nanofibrous scaffolds for retinal tissue engineering

Different ratios of poly(ε-caprolactone) (PCL) and gelatinwere used to fabricate scaffolds for regeneration of retinal pigment epithelium (RPE) layer. Physical and chemical characterizations were performed and the behavior of human RPE cells on the scaffolds was evaluated subsequently. An increase in gelatin content in the scaffold enhanced hydrophilicity, RPE cell attachment, proliferation, and spreading over PCL scaffolds. Granular and cytoplasmic expressions of RPE65 and Cytokeratin 8/18 markers confirmed the presence of RPE cells. It was believed that PCL/gelatin scaffolds could be used as substrates to replace RPE extracellular matrix to facilitate regeneration of RPE layer in retinal diseases.