共查询到20条相似文献,搜索用时 140 毫秒
1.
2.
3.
纤维微表处应用技术研究 总被引:1,自引:0,他引:1
通过系列室内试验和施工实践对纤维微表处技术进行了探讨,对比分析了纤维微表处和普通微表处的水稳定性、抗磨耗性、抗车辙、马歇尔稳定度性能,证明纤维微表处具有良好的抗滑性能、耐久性、抗疲劳性能及抗流变性能及良好的经济、社会效益和推广应用价值,并且施工快捷、简单。 相似文献
4.
选用不同集料、沥青和乳化剂,通过微表处混合料的湿轮磨耗、粘聚力和水敏感性系列室内试验,探讨了微表处配合比设计中各物料之间的相容性问题,并分析了微表处混合料在成型过程中的影响因素,进一步说明微表处配合比设计中的各物料之间相容性的重要性。 相似文献
5.
微表处技术在北京六环路养护工程试验路段中的应用 总被引:3,自引:1,他引:2
对微表处技术进行了简单介绍。详细介绍了微表处技术在北京六环路养护工程中试验路段上的应用情况。通过室内试验以及试铺试验路段证明,采用微表处技术可有效地防止路面水的下渗、修复车辙等前期病害。 相似文献
6.
7.
8.
9.
10.
11.
FCC油浆糠醛抽出油富含芳香组分,是良好的道路沥青调合分。用FCC油浆糠醛抽出油溶胀预处理胶粉制备改性沥青,考察了胶粉含量和胶油比双因素对改性沥青性能的影响,同时使用扫描电子显微镜和荧光显微镜对胶粉和改性沥青的微观形态进行分析。研究结果表明,使用FCC油浆糠醛抽出油溶胀预处理胶粉可制备出性能良好的改性沥青。尤其是随着胶粉含量的增加,沥青的软化点和低温延度明显得到了改善。当胶粉质量分数为25%,胶油比控制在4~7时改性沥青的基本性能和老化性能良好,热储存稳定性最佳。 相似文献
12.
主要介绍了SBS改性微表处技术,针对SBS改性沥青高黏度、难乳化的特点,通过对乳化剂的性能研究,提高其乳化能力,达到对SBS改性沥青较好的乳化效果,并对比SBR改性微表处测试了其乳化沥青及沥青混合料的技术指标,结果表明:SBS改性微表处可以达到SBR改性微表处的应用效果,并在有些指标上优于SBR改性微表处,并且SBS改性微表处在经济效益上具有较大优势。 相似文献
13.
14.
用废汽车轮胎粉生产改性沥青不但可以提高沥青的使用性能。还可以解决其"黑色污染"问题。以欢喜岭沥青为原料,采用湿法生产胶粉改性沥青过程中,剪切温度、剪切速率、剪切时间和胶粉加入量等都会影响胶粉改性沥青的性质。 相似文献
15.
16.
Hosein Zanjirani Farahani Saeed Sadeghpour Galooyak 《Petroleum Science and Technology》2017,35(15):1601-1606
In this research, adding waste plastics (LDPE) and crumb rubber to bitumen causes the improvement in the viscoelastic behavior of bitumen. The sample containing 3% waste LDPE and 3% CR is the optimum one, which can be resulted from the complex modulus and the phase difference results. In continuance, elastic recovery test at 25 °C was performed on samples, and it was seen that with increase of crumb rubber content, elastic recovery increases because of elastic property of crumb rubber. In sample containing 5% waste polyethylene and 3% crumb rubber elastic recovery has been approached to the desirable amounts according to existence of enough crumb rubber. Finally, for evaluation of bitumen performance in mixture with modifiers, rotational viscosity on samples was performed. 相似文献
17.
"力化学"原理制备废橡胶粉改性沥青的研究 总被引:8,自引:2,他引:6
根据“力化学”原理制备了废胶粉改性沥青。研究了制备工艺、胶粉品种、胶粉尺寸、相溶剂和添加剂等因素对改性沥青性能的影响。结果表明,研制工艺制备的改性沥青比传统工艺制备的改性沥青具有更优良的性能;不同胶粉制备的改性沥青性能相差较大,常温助剂法生产的胶粉(简称常温助剂胶粉)最优,常温法生产的胶粉(简称常温胶粉)次之,冷冻胶粉最差;不同胶粉尺寸制备的改性沥青性能上没有明显区别;加入相溶剂和添加剂均可以改善沥青的性能,但存在一最佳含量。对所制备的胶粉改性沥青进行了常规和SHRP测试,完全达到了JTJ036~1998中SBS改性沥青C级技术指标。 相似文献
18.
19.
Abstract The use of waste tire rubbers as bitumen modifiers can contribute to alleviating pollution problems caused by discarding scrap tires. This article deals with the preparation and influencing factors of bitumens modified by crumb tire rubber. The performance of crumb tire rubber—modified bitumens (CTRMBs), such as penetration grade, softening point, and ductility, have been studied as a function of rubber selection, shearing temperature, shearing rotational speed, shearing time, rubber addition, and blended oil addition. From the experimental results obtained, optimal technology conditions were determined as: a shearing time of 40 min, a shearing temperature of 180°C, a shearing rotational speed of 7000 rpm, a rubber addition less than 25 wt%, and a blended oil addition less than 4 wt% during manufacturing operations. By using blended oil, the modified asphalt that measured up to standard of the crumb rubber—modified asphalt (FHWA-SA-92-002) was prepared, following the process flow diagram. 相似文献