Spectroscopic tags using dye-embedded nanoparticles and surface-enhanced Raman scattering

Surface-enhanced Raman scattering is capable of providing rich vibrational information at the level of single molecules and single nanoparticles, but the practical applications of this enormous enhancement effect are still a challenge. Here we report a new class of dye-embedded core-shell nanoparticles that are highly efficient for surface Raman enhancement and could be used as spectroscopic tags for multiplexed detection and spectroscopy. The core-shell particles contain a metallic core for optical enhancement, a reporter molecule for spectroscopic signature, and an encapsulating silica shell for protection and conjugation. A surprising finding is that organic molecules with an isothiocyanate (-N=C=S) group or multiple sulfur atoms are compatible with silica encapsulation. In comparison with fluorescent dyes and quantum dots, enhanced Raman probes contain a built-in mechanism for signal amplification and provide rich spectroscopic information under ambient experimental conditions.     

Carbon nanowalls amplify the surface-enhanced Raman scattering from Ag nanoparticles

We report surface-enhanced Raman scattering (SERS) from Ag nanoparticles decorated on thin carbon nanowalls (CNWs) grown by microwave plasma chemical vapor deposition. The Ag morphology is controlled by exposing the CNWs to oxygen plasma and through the electrodeposition process by varying the number of deposition cycles. The SERS substrates are capable of detecting low concentrations of rhodamine 6G and bovine serum albumin, showing much higher Raman enhancement than ordinary planar HOPG with Ag decoration. The major factors contributing to this behavior include: high density of Ag nanoparticles, large surface area, high surface roughness, and the underlying presence of vertically oriented CNWs. The relatively simple procedure of substrate preparation and nanoparticle decoration suggests that this is a promising approach for fabricating ultrasensitive SERS substrates for biological and chemical detection at the single-molecule level, while also enabling the study of fundamental SERS phenomena.     

Preparation of silver nanoparticles by photo-reduction for surface-enhanced Raman scattering

A substrate for surface-enhanced Raman scattering (SERS) has been developed. Based on the surface-catalyzed reduction of Ag⁺ by citrate on the silver nanoparticles surface under light irradiation, small silver seeds on a quartz slide can be enlarged. The optical properties and characteristics of the silver films have been investigated by ultraviolet-visible spectroscopy, scan electron microscope and atomic force microscopy (AFM). The results indicate that the particle size and shape are different at different reduction time. At the first 3 h, some triangular and hexagonal nanoparticles formed; with the reduction proceeding, the shape of the silver particles became irregular and the size became larger. The silver films obtained are very suitable as SERS active substrate. The relationship between SERS intensity and the reduction time has been investigated for 1,4-bis[2-(4-pyridyl)ethenyl]-benzene molecule adsorbed on the silver film. The SERS intensity reached a maximum at 8 h reduction. The AFM measurements indicate that roughness features with an average size of 100 nm are present on the surface, which yielded the strongest SERS signal. Pyridine was used as a probe molecule to investigate the enhancement factor (EF) of the silver films. According to the formalism of Tian and co-workers, the EF of the silver films is estimated to be 3.4 × 10⁵. The silver film that can remain active for more than 50 days would seem to be suitable for various analytical applications.     

Fabrication of rice-like gold nanoparticles and application in surface-enhanced Raman scattering

A simple method for the synthesis of rice-like gold nanoparticles using gold nanorods (GNRs) as precursors in the aqueous phase was exploited. The method used in this work involves eroding GNRs with potassium ferricyanide in the aqueous phase. Surface plasmon resonance (SPR) bands of the resulting nanoparticles present a notable blue-shift from 670 to 570 nm with increasing amounts of potassium ferricyanide, and subsequently the shape of the resulting nanoparticles can be readily controlled. Most importantly, the SPR response is an almost linear function of the quantity of potassium ferricyanide added. The synthesis of the resulting nanoparticles with various aspect ratios has been extensively studied and is well established. The surface-enhanced Raman scattering (SERS) intensity enhancement of the adsorbate on the surface of these gold nanoparticles was also studied.     

Effect of oxidation on surface-enhanced Raman scattering activity of silver nanoparticles: a quantitative correlation

We quantitatively studied, using X-ray photoelectron spectroscopy (XPS), oxidation of substrate-immobilized silver nanoparticles (Ag NPs) in a wide range of conditions, including exposure to ambient air and controlled ozone environment under UV irradiation, and we correlated the degree of silver oxidation with surface-enhanced Raman scattering (SERS) enhancement factors (EFs). The SERS activity of pristine and oxidized Ag NPs was assessed by use of trans-1,2-bis(4-pyridyl)ethylene (BPE) and sodium thiocynate as model analytes at the excitation wavelength of 532 nm. Our study showed that the exposure of Ag NPs to parts per million (ppm) level concentrations of ozone led to the formation of Ag(2)O and orders of magnitude reduction in SERS EFs. Such an adverse effect was also notable upon exposure of Ag NPs under ambient conditions where ozone existed at parts per billion (ppb) level. The correlated XPS and SERS studies suggested that formation of just a submonolayer of Ag(2)O was sufficient to decrease markedly the SERS EF of Ag NPs. In addition, studies of changes in plasmon absorption bands pointed to the chemical enhancement as a major reason for deterioration of SERS signals when substrates were pre-exposed to ambient air, and to a combination of changes in chemical and electromagnetic enhancements in the case of substrate pre-exposure to elevated ozone concentrations. Finally, we also found UV irradiation and ozone had a synergistic effect on silver oxidation and thus a detrimental effect on SERS enhancement of Ag NPs and that such oxidation effects were analyte-dependent, as a result of inherent differences in chemical enhancements and molecular binding affinities for various analytes.     

Reproducible surface-enhanced Raman scattering spectra of bacteria on aggregated silver nanoparticles

Surface-enhanced Raman scattering (SERS) is proven to be a powerful technique for rapid identification and discrimination of microorganisms. However, due to the heterogeneous nature of the samples, the acquisition of reproducible spectra hinders the further development of the technique. In this study, we demonstrate the influence of the experimental conditions on SERS spectra. Then, we report a simple sample preparation method coupled with a light microscope attached to a Raman spectrometer to find a proper spot on the sample to acquire reproducible SERS spectra. This method utilizes the excited surface plasmons of the aggregated silver nanoparticles to visualize the spots on the sample. The samples are prepared using the concentrated silver colloidal solutions. The collection time for one spectrum is 10 s and each spectrum is a very good representative of the other spectra acquired from the same sample. The nature of the surface charge of the silver nanoparticles influences the spectral features by determining the strength of the interactions between nanoparticles and bacteria and the aggregation properties of the nanoparticles. Although increasing the colloid concentration in the sample resulted in reproducible spectra from arbitrary points on the sample, a great variation from sample to sample prepared with the different colloidal solution concentrations is observed.     

Comparison of surface-enhanced resonance Raman scattering from unaggregated and aggregated nanoparticles

The effect of excitation frequency and state of aggregation on the sensitivity obtained in ultratrace analysis using colloidal suspensions of silver nanoparticles and surface-enhanced resonance Raman scattering (SERRS) detection is explored to define suitable conditions for quantitative analysis. Two structurally similar dyes, only one of which causes aggregation, were used as analytes without the use of external aggregating agents, thus simplifying the surface chemistry and removing a major source of error. Addition of the nonaggregating dye caused no change in particle charge or size and no time-dependent aggregation as measured by zeta potential and particle size analysis. The most intense single-particle scattering was obtained using excitation at the wavelength of the plasmon resonance. Molecular resonance added approximately 2 orders of magnitude in sensitivity. Addition of the aggregating dye caused a reduction in surface charge of the particles and initiated a time-dependent aggregation process. However, constant SERRS with time is obtained at some excitation wavelengths probably because a constant number of clusters active at these wavelengths is maintained in the dynamic aggregation process. The additional enhancement caused by aggregation and molecular resonance is spread over a range of excitation frequencies. However, electronic spectra suggested that plasmon resonance enhancement would be effective at the longest wavelength of excitation used (785 nm), but there was a significant drop in intensity this far away from the absorbance maximum of the dye (429 nm). Thus, sensitive analysis using suspensions of single nanoparticles is feasible provided the excitation frequency used is close to that of the plasmon resonance frequency. Aggregation adds only an enhancement of approximately 6 in the experiments performed since only some particles in aggregates will have an active plasmon at any one wavelength, but the range of excitation wavelengths at which good enhancement is obtained is wider giving more flexibility if more complexity.     

Shape-controlled synthesis and application in surface-enhanced Raman scattering of novel palladium nanoparticles

Palladium nanoparticles (PdNPs), as a platinum substitute, have opened many new opportunities for future catalytic applications, especially in fuel cell reactions, because of its comparable catalytic properties. In the present study, a simple and “green” procedure to the synthesis of PdNPs with cauliflower-like and polyhedron-like shapes is demonstrated. The novel PdNPs were prepared by the reduction of palladium chloride with ascorbic acid in the presence of chitosan served as a capping agent, whose shapes can be effectively controlled by varying reaction temperatures. Surface-enhanced Raman scattering (SERS) investigation demonstrated that the more irregular PdNPs have the stronger SERS activities. We believe that the PdNPs with unique shapes may find practical applications for electronics, photonics, fuel cells, and biofuel cells.     

Shape-dependent surface-enhanced Raman scattering in gold-Raman probe-silica sandwiched nanoparticles for biocompatible applications

To meet the requirement of Raman probes (labels) for biocompatible applications, a synthetic approach has been developed to sandwich the Raman-probe (malachite green isothiocyanate, MGITC) molecules between the gold core and the silica shell in gold-SiO? composite nanoparticles. The gold-MGITC-SiO? sandwiched structure not only prevents the Raman probe from leaking out but also improves the solubility of the nanoparticles in organic solvents and in aqueous solutions even with high ionic strength. To amplify the Raman signal, three types of core, gold nanospheres, nanorods and nanostars, have been chosen as the substrates of the Raman probe. The effect of the core shape on the surface-enhanced Raman scattering (SERS) has been investigated. The colloidal nanostars showed the highest SERS enhancement factor while the nanospheres possessed the lowest SERS activity under excitation with 532 and 785 nm lasers. Three-dimensional finite-difference time domain (FDTD) simulation showed significant differences in the local electromagnetic field distributions surrounding the nanospheres, nanorods, and nanostars, which were induced by the localized surface plasmon resonance (LSPR). The electromagnetic field was enhanced remarkably around the two ends of the nanorods and around the sharp tips of the nanostars. This local electromagnetic enhancement made the dominant contribution to the SERS enhancement. Both the experiments and the simulation revealed the order nanostars > nanorods > nanospheres in terms of the enhancement factor. Finally, the biological application of the nanostar-MGITC-SiO? nanoparticles has been demonstrated in the monitoring of DNA hybridization. In short, the gold–MGITC-SiO? sandwiched nanoparticles can be used as a Raman probe that features high sensitivity, good water solubility and stability, low-background fluorescence, and the absence of photobleaching for future biological applications.     

Active control of silver nanoparticles spacing using dielectrophoresis for surface-enhanced Raman scattering

We demonstrate an active microfluidic platform that integrates dielectrophoresis for the control of silver nanoparticles spacing, as they flow in a liquid channel. By careful control of the nanoparticles spacing, we can effectively increase the surface-enhanced Raman scattering (SERS) signal intensity based on augmenting the number of SERS-active hot-spots, while avoiding irreversible aggregation of the particles. The system is benchmarked using dipicolinate (2,6-pyridinedicarboxylic acid) (DPA), which is a biomarker of Bacillus anthracis. The validity of the results is discussed using several complementing characterization scenarios.     

Base effects on fabrication of silver nanoparticles embedded silica nanocomposite for surface-enhanced Raman scattering (SERS)

In this paper, we studied on the effect of organic bases in the case of ethylene glycol based fabrication of silver nanoparticles embedded silica nanocomposite (Ag SNC) without heating. Considering their chemical structures, butylamine (BA), ethanolamine (EA), triethanolamine (TEA), tributylamine (TBA), octylamine (OA) and Jeffamine 500 (JA) were used as an organic base. In addition, the effect of the concentrations of AgNO3 and organic bases on the formation of Ag SNC was also examined. In conformity with the characteristics of Ag SNC, SERS signal intensity of benzenethiol on Ag SNC was measured. As a result, the SERS signal intensity of Ag SNCs was strongly dependent on the reaction conditions. Furthermore, when reacted under the best reaction condition with concentrations of AgNO3 and OA, 3 mM and 5 mM, respectively, a large-scale production of Ag SNC was possible under the mild conditions.     

Type I collagen-templated assembly of silver nanoparticles and their application in surface-enhanced Raman scattering

Silver nanoparticles (Ag NPs) are one of the active substrates that are employed extensively in surface-enhanced Raman scattering (SERS), and aggregations of Ag NPs play an important role in enhancing the Raman signals. In this paper, we fabricated two kinds of SERS-active substrates utilizing the electrostatic adsorption and superior assembly properties of type I collagen. These were collagen-Ag NP aggregation films and nanoporous Ag films. Two probe molecules, 4-aminothiophenol (4-ATP) and methylene blue (MB), were studied on these substrates. These substrates showed reproducible SERS intensities with relative standard deviations (RSDs) of 8-10% and 11-14%, respectively, while the RSDs of the traditional thick Ag films were 12-28%. Also, the intensities for the 4-ATP spectrum on the collagen-templated nanoporous Ag film were approximately one order higher than those on the DNA-templated Ag?film.     

Adsorption of a cholesteric liquid crystal polyester on silver nanoparticles studied by surface-enhanced Raman scattering and micro Raman spectroscopy

A Raman study of the adsorption of thermotropic cholesteric liquid crystal polyester PTOBDME ([C(34)H(36)O(8)](n)) on Ag surfaces is presented in this work. The affinity and adsorption mechanism of this polymer was tested on Ag metal colloids and on Ag films obtained by direct immobilization of the colloidal nanoparticles. We have first studied the structure of PTOBDME suspended in several solvents in order to identify the Raman bands used as structural markers. The adsorption of the polymer leads to a deep conformational change involving both the main chain and the aliphatic side chain. The interaction of polymers like PTOBDME with metals could be interesting in the formation of functionalized surfaces, providing them with specific physicochemical properties with possible applications in recognition phenomena, which can be easily characterized by Raman spectroscopy.     

Silver nanoparticles deposited on porous silicon as a surface-enhanced Raman scattering (SERS) active substrate

Silver nanoparticles were deposited spontaneously from their aqueous solution on a porous silicon (PS) layer. The PS acts both as a reducing agent and as the substrate on which the nanoparticles nucleate. At higher silver ion concentrations, layers of nanoparticle aggregates were formed on the PS surface. The morphology of the metallic layers and their SERS activity were influenced by the concentrations of the silver ion solutions used for deposition. Raman measurements of rhodamine 6G (R6G) and crystal violet (CV) adsorbed on these surfaces showed remarkable enhancement of up to about 10 orders of magnitude.     

Minimally invasive surface-enhanced Raman scattering detection with depth profiles based on a surface-enhanced Raman scattering-active acupuncture needle

To obtain depth profiles of surface-enhanced Raman scattering (SERS) information in living systems, a SERS-active needle was structured by acupuncture needles, gold nanoshells (GNSs), and polystyrene, which were used as carriers, SERS-active elements to be absorbed on the carriers, and coatings to protect the absorbed GNSs from being erased during insertion, respectively. The SERS-active needle is minimally invasive for entering and exiting the body. The interspaces between the GNSs became vessels to collect diffused fluids at different depths after a SERS-active needle was inserted into an agarose gel, and the SERS intensity profile on the SERS-active needle coincided with the concentration profile of Nile Blue A (NBA) in the gel. SERS detection in vitro avoided the signal attenuation in gels, and the SERS detection at different spots of the SERS-active needle provided a depth profile of the NBA molecule in the gel. In vivo experiments of NBA and 6-mercaptopurine confirmed that the SERS-active needle could collect fluids in living systems easily with minimal invasion and provide information about depth profiles of target molecules in tissues.     

Novel Ag-Cu substrates for surface-enhanced Raman scattering

Ag dendrites were deposited on rough Cu plate by a simple galvanic displacement process between Ag ion and Cu under room temperature. Surface-enhanced Raman scattering (SERS) performances have been studied using Rhodamine 6G (R6G) probe molecules on this kind of Ag-Cu substrates. The high SERS enhancements are attributed to the highly branched Ag dendritic nanostructures and Ag nanoparticles formed on the trunks, branches, and even leaves.     

Surface enhanced Raman scattering on long-range ordered noble-metal nanocrescent arrays

Long-range ordered noble-metal nanocrescent arrays of different sizes and shapes have been successfully fabricated by using both nanoimprint lithography and e-beam lithography techniques. Large surface enhanced Raman scattering (SERS) enhancements in the detection of rhodamine 6G (R6G) molecules on these arrays have been observed and attributed to the enhancement of the local electromagnetic (EM) fields near individual nanocrescents. Electromagnetic enhancement factors for crescents of different shapes are computed using the discrete dipole approximation and compared with experimental measurements of the R6G Raman intensities. It is found that the maximum values of SERS intensity appear at an intermediate value of the crescent eccentricity and the observed behaviour is related to the spatial distributions of the enhancement of the local EM field (hot spots).     

A review of the preparation and application of magnetic nanoparticles for surface-enhanced Raman scattering

In recent years, the unique properties of magnetic functional nanomaterials have received considerable attentions and show promising applications in separation, detection, diagnosis, catalysis, environment remediation and so on. Specifically, introducing magnetic nanomaterials (MNPs) into traditional sensing techniques greatly simplifies detection operation and improves sensing performances, which makes magnetic nanomaterial-based sensing techniques become a hot research topic. Compared with other sensing techniques such as chromatography, fluorescence, mass spectrum and electrochemistry, surface-enhanced Raman scattering (SERS) displays unique properties of high-sensitivity, fingerprint specificity and nondestructive detection. The introduction of MNPs in SERS has proven to be an efficient way to resolve several critical challenges in practical SERS analysis leading to highly efficient target separation and enrichment, high-sensitive detection and precise outcomes analysis. This makes the MNPs involved SERS analysis a powerful technique with very appealing and promising application in various branches of analytical science. In this review, we first briefly introduced the preparation, encapsulation and surface modification of magnetic nanoparticles, assembly of magnetic nanoparticle–plasmonic substrates and then discussed their applications in SERS analysis, including biomedical application, environmental analysis, food safety and chemical reaction monitoring. Finally, we presented some outlooks on further developments of magnetic nanoparticles in SERS applications.