共查询到20条相似文献,搜索用时 46 毫秒
1.
采用多孔二氧化硅(SiO2)、聚乙二醇(PEG)等研究一种定形无机 有机复合相变材料的制备方法,并加入适当的促进剂和改性剂对复合材料进行了改性。利用多孔二氧化硅具有良好的吸附性能特点,将聚乙二醇相变材料吸附在二氧化硅微孔结构内,在毛细管力和表面张力的作用下,聚乙二醇在发生固液相变的时候很难从二氧化硅的微孔结构内渗透出来,从而解决了聚乙二醇在蓄热技术中应用时的液体流动问题。同时对相变材料进行了热性能分析,实验证明该复合相变材料具有形状稳定,导热率高,储热能力大等特点。 相似文献
2.
3.
4.
无机水合盐相变材料过冷度抑制方法的研究进展 总被引:2,自引:0,他引:2
无机水合盐相变材料具有较高的相变潜热、原料易得、安全性高等优点,在未来中低温储能领域有巨大的应用潜力,但其在相变过程中易出现“过冷”与“相分离”等现象,严重影响了其热稳定性能,相关问题可通过添加成核剂、增稠剂进行解决。但无机水合盐在液态下会发生泄漏,需要将其限制在一定区域内。通过多孔材料吸附、微胶囊化等方法可以对无机水合盐相变材料进行封装,多孔材料如膨胀石墨、膨润土、泡沫金属等可以吸附无机水合盐,防止其相变过程发生泄漏。微胶囊包覆则是通过将相变材料微胶囊化封装在壳材内,常用壳材包括聚甲基丙烯酸甲酯、三聚氰胺?甲醛树脂或聚脲树脂等,此外,无机SiO2壁材也是常用的材料。通过吸附封装或者微胶囊化,可以将无机水合盐相变材料限制在一定区域内,提高无机水合盐相变材料的分散性能,降低其过冷度、改善相分离现象,进一步提高无机水合盐相变循环的热稳定性,是解决无机水合盐相变材料在相变过程中渗漏问题的有效方法。本工作综述了无机水合盐相变材料过冷、相分离问题的研究现状,总结了采用多孔材料吸附和微胶囊化抑制或解决无机水合盐过冷度的研究进展,并对今后无机水合盐储能应用研究提出了建议与展望。 相似文献
5.
6.
有机相变材料具有过冷度小、无相分离、蓄热强等优势,在相变储热领域一直受到广泛的关注。然而,较低的热导率、液相泄漏和较差的热稳定性成为限制其应用的瓶颈缺陷。近几年,有机-无机复合相变材料的研究成为新的热点,极大地促进了有机相变材料的应用和发展。本文综述了常见的提高有机相变材料导热性能的高导热性纳米材料,以及制备有机-无机定形复合相变材料常选用的多孔支撑材料,并从制备方法、作用方式和热物性等方面介绍了有机-无机复合相变材料,复合相变材料相比于单一纯相变材料具有诸多优越的性能。预测有关结构优化、封装工艺并与高效储能系统结合的研究会成为有机-无机复合相变材料未来的发展趋势。 相似文献
7.
蛭石是中国优势非金属矿产之一,具有二维(2D)层状结构和独特的高膨胀性能等优点,可应用于构建新型功能材料,但其存在结构稳定性差和纳米尺度控制难等问题。该文阐述了天然层状蛭石的结构与性质,回顾了近年来国内外关于蛭石复合功能材料的相关报道,重点分析了蛭石的剥离与改性及其在吸附、催化剂载体、有机-无机复合材料、储能、药物载体等方面的研究进展。最后针对蛭石研究存在的主要问题,提出今后研究的重点在蛭石剥离,多级结构复合功能材料和有机-无机复合功能材料的构建,以及相关机理的探索。 相似文献
8.
9.
化学吸附储热技术近年来在太阳能利用和中低温余热领域得到了广泛关注,与传统的显热储热和相变储热技术相比具有储热密度高、储热损失小、可实现冷热双储等优点,然而其传质传热问题和液解问题导致的吸附性能和循环稳定性能的降低限制了其规模化应用。本文综述了利用矿物基多孔结构材料对化学吸附材料进行封装的方法以解决上述问题,总结了近年来石墨、蛭石等不同矿物基化学吸附储热材料的特点及其在化学吸附系统中的应用,主要介绍了矿物基化学吸附材料的两种体系(无机盐-水体系和氯盐-氨体系)的传质传热、化学吸附热等性能,并进一步指出了矿物基化学吸附储热技术未来的发展趋势,提出开发新型矿物基复合材料和优化化学吸附系统是未来的研究热点。 相似文献
10.
11.
ONACCURACYOFANALYSISOFOFHYDROGEN1前言我公司目前应用的氢气纯度分析方法有两种,一种是爆炸反应法,另一种是焦性没食子酸吸收法。几年来,人们对两种分析方法的准确性曾有过褒贬不一的评论。这里我们也谈谈自己粗浅的观点。2爆炸法测定氢气纯度一定量的氢气样品与适量的空气之均匀混合物因反应后生成液体水而引起气体体积减少,减少的体积等于参加反应气体体积之和。其中l/3为氧气,2/3为氢气。根据氢气取样量和反应前后混气体体积之差,以及氢气在反应中的体积比例关系,可计算出样品的氢气纯度。计算公式式中:A一混… 相似文献
12.
P. P. Budnikoff 《Journal of the American Ceramic Society》1924,7(11):817-820
The different analytical methods proposed for the evaluation of gypsum have been subjected to an experimental test. A combination method, consisting of a fusion with KHCO3 and determination of CaO by KMnO4 titration, the SO3 by Andrews method of titration of BaCrO4 has been found to give very reliable results with the least consumption of time. 相似文献
13.
A model is developed for the sedimentation from a suspension of two particle species of unequal densities and of different sizes. The composition and the thickness of various layers in the sediments are predicted using graphical and analytical methods. The model predictions were in excellent agreement with experimental results, when the particle size ratio was ≥ 108. When size ratio of the particles was 2.60 and 4.31 the agreement occurred in about 50 percent of the cases. 相似文献
14.
A novel technique serves to monitor instantaneous rates of loss of a volatile solute from a suspended drop during drying. A highly sensitive electron capture detector is used to monitor concentrations of SF6 released into a flowing gas stream from a suspended, drying drop. Simultaneously, the appearance and morphological development of the drop are monitored with a video camera. This provides the wherewithal of relating instantaneous rates of loss of the volatile solute to particular events during the development of particle morphology.
Initial experiments have been carried out with drops of aqueous solutions of glucose, sucrose, maltodextrin and coffee extract. The results clearly display the onset of the volatiles-retentive selective diffusion phenomenon. There is also substantial loss of the volatile component later in the drying process, when the drops undergo repeated ex ansion, bursting and cratering due to the formation of internaf bubbles. These experiments appear to be the first quantitative demonstration of major losses accompanying changes in drop morphology. 相似文献
Initial experiments have been carried out with drops of aqueous solutions of glucose, sucrose, maltodextrin and coffee extract. The results clearly display the onset of the volatiles-retentive selective diffusion phenomenon. There is also substantial loss of the volatile component later in the drying process, when the drops undergo repeated ex ansion, bursting and cratering due to the formation of internaf bubbles. These experiments appear to be the first quantitative demonstration of major losses accompanying changes in drop morphology. 相似文献
15.
16.
ANALYSIS OF RECENT MEASUREMENTS OF THE VISCOSITY OF GLASSES 总被引:5,自引:0,他引:5
Viscosity of Simple Soda-Silicate 500° to 1400°C Comparison of the results given by English with those of Washburn, Shelton and Libman, indicates a discrepancy in the absolute values of log10 viscosity amounting to 0.6, those of Washburn et al., being relatively too high. If correction for this is made, the isothermal curves of log10 viscosity as a function of soda content are smooth up to 50% Na2O, showing no inflection. The observations as a function of temperature T are all represented within accidental error by an equation of the type where all three constants vary regularly with the composition. Change of Viscosity of Glass (6SiO2, 2Na2O) due to Molecular Substitution of CaO, MgO and Al2O3 for Na2O The effect is clearly brought out by plotting (from the results of English) the change of log10η due to the substitution as a function of temperature. The curves each show a sharp bend at a temperature between 840° and 1050°C, which is designated the aggregation temperature Ta. If we divide these curves by the corresponding percentage substituted, we get curves for each oxide which are straight and parallel below the aggregation temperatures, the slopes (increase of change of log10η per 100°C) being −0.056 (CaO), −0.055 (MgO), −0.018 (A12O3) per per cent oxide substituted. For substitution of 1/2 molecule the slopes are −0.325 (CaO), −0.23 (MgO) and −0.18 (Al2O3) per 100°. At the aggregation temperature the change of log10η per per cent is a minimum, 0.03 to 0.06 for CaO, 0.12 for MgO, 0.07 for Al2O3. Evidence of Aggregation in Glasses, from viscosity Measurements The sharp bends in the plots of change of log10η due to substitution of an oxide for Na2O, suggest the beginning of molecular aggregation at these temperatures. These aggregation temperatures are close to the devitrification temperatures, but the effect on the viscosity curves cannot be due to actual devitrification since it does not change with time. Taking the aggregation temperatures as equal to devitrification temperatures, additional isotherms are roughly sketched into the equilibrium triangle of the system Na2O-CaO-SiO2. Change of Viscosity of Glass (4SiO2, 2Na2O) due to of Substitution of B2O3 for SiO2 The change of log10η (from the results of English) is plotted as a function of temperature, and also the change of log10η per per cent B2O3. The curves are more complex than for the substitution for Na2O. 相似文献
17.
18.
面对日益激烈的市场竞争,摩托车油箱外观质量越来越成为影响销售的因素之一。文章介绍了改进工艺后的油箱涂装,该涂装体系提高了油箱外观的丰满度,降低了油箱涂装的生产成本。 相似文献