Vitamin B12 buccoadhesive tablets: auspicious non-invasive substitute for intra muscular injection: formulation,in vitro and in vivo appraisal

Attempting to prepare a convenient bioavailable formulation of vitamin B₁₂ (cyanocobalamin), 17 tablet formulations were prepared by direct compression. Different concentrations of hydroxypropyl methyl cellulose (HPMC), carbopol 971p (CP971p), and chitosan (Cs) were used. The tablets were characterized for thickness, weight, drug content, hardness, friability, surface pH, in vitro drug release, and mucoadhesion. Kinetic analysis of the release data was conducted. Vitamin B₁₂ bioavailability from the optimized formulations was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neurotone^® I.M. injection was used for comparison. HPMC (F1-F4), CP971p (F5-F8), and HPMC/CP971p (F12-F15)-based formulations showed acceptable mechanical properties. The formulated tablets showed maximum swelling indices of 232?±?0.13. The surface pH values ranged from 5.3?±?0.03 to 6.6?±?0.02. Bioadhesive force ranged from 66?±?0.6 to 150?±?0.5?mN. Results showed that CP971p-based tablets had superior in vitro drug release, mechanical, and mucoadhesive properties. In vitro release date of selected formulations were fitted well to Peppas model. HPMC/CP971p-based formulations showed bioavailability up to 2.7-folds that of Neurotone^® I.M. injection.     

Study of controlled-release floating tablets of dipyridamole using the dry-coated method

Dipyridamole (DIP), having a short biological half-life, has a narrow absorption window and is primarily absorbed in the stomach. So, the purpose of this study was to prepare controlled-release floating (CRF) tablets of dipyridamole by the dry-coated method. The influence of agents with different viscosity, hydroxypropylmethylcellulose (HPMC) and polyvinylpyrollidon K30 (PVP K30) in the core tablet and low-viscosity HPMC and PVP K30 in the coating layer on drug release, were investigated. Then, a study with a three-factor, three-level orthogonal experimental design was used to optimize the formulation of the CRF tablets. After data processing, the optimized formulation was found to be: 80?mg HPMC K4M in the core tablet, 80?mg HPMC E15 in core tablet and 40?mg PVP K30 in the coating layer. Moreover, an in vitro buoyancy study showed that the optimized formulation had an excellent floating ability and could immediately float without a lag time and this lasted more than 12?h. Furthermore, an in vivo gamma scintigraphic study showed that the gastric residence time of the CRF tablet was about 8?h.     

Bioavailability enhancement of baclofen by gastroretentive floating formulation: statistical optimization,in vitro and in vivo pharmacokinetic studies

Objectives: The study was aimed to improve bioavailability of baclofen by developing gastroretentive floating drug delivery system (GFDDS).

Methods: Preliminary optimization was done to select various release retardants to obtain minimum floating lag time, maximum floating duration and sustained release. Optimization by 3² factorial design was done using Polyox WSR 303 (X₁) and HPMC K₄M (X₂) as independent variables and cumulative percentage drug released at 6?h (Q6h) as dependent variable.

Results: Optimized formulation showed floating lag time of 4–5 s, floated for more than 12?h and released the drug in sustained manner. In vitro release followed zero ordered kinetics and when fitted to Korsemeyer Peppas model, indicated drug release by combination of diffusion as well as chain relaxation. In vivo floatability study confirmed floatation for more than 6?h. In vivo pharmacokinetic studies in rabbits showed C_max of 189.96?±?13.04?ng/mL and T_max of 4?±?0.35?h for GFDDS. The difference for AUC_(0–T) and AUC_(0–∞) between the test and reference formulation was statistically significant (p > 0.05). AUC_(0–T) and AUC_(0–∞) for GFDDS was 2.34 and 2.43 times greater than the marketed formulation respectively.

Conclusion: GFDDS provided prolonged gastric residence and showed significant increase in bi oavailability of baclofen.     

Sustained-release of Cyclosporin A pellets: preparation,in vitro release,pharmacokinetic studies and in vitro–in vivo correlation in beagle dogs

The aim of this study was to develop Cyclosporin A (CsA) sustained-release pellets which could maintain CsA blood concentration within the therapeutic window throughout dosing interval and to investigate the in vitro–in vivo correlation (IVIVC) in beagle dogs. The CsA sustained-release pellets (CsA pellets) were prepared by a double coating method and characterized in vitro as well as in vivo. Consequently, the CsA pellets obtained were spherical in shape, with a desirable drug loading (7.18?±?0.17?g/100?g), good stability and showed a sustained-release effect. The C_max, T_max and AUC_0–24 of CsA pellets from the in vivo pharmacokinetics evaluation was 268.22?±?15.99?ng/ml, 6?±?0?h and 3205.00?±?149.55?ng·h/ml, respectively. Compared with Neoral®, CsA pellets significantly prolonged the duration of action, reduced the peak blood concentration and could maintain a relatively high concentration level till 24?h. The relative bioavailability of CsA pellets was 125.68?±?5.37% that of Neoral®. Moreover, there was a good correlation between the in vitro dissolution and in vivo absorption of the pellets. In conclusion, CsA pellets which could ensure a constant systemic blood concentration within the therapeutic window for 24?h were prepared successfully. Meanwhile, this formulation possessed a good IVIVC.     

Optimization and characterization of gastroretentive floating drug delivery system using Box-Behnken design

Context: One among many strategies to prolong gastric residence time and improve local effect of the metronidazole in stomach to eradicate Helicobacter pylori in the treatment of peptic ulcer was floating drug delivery system particularly effervescent gastroretentive tablets.

Objective: The objective of this study was to prepare and evaluate, effervescent floating drug delivery system of a model drug, metronidazole.

Methods: Effervescent floating drug delivery tablets were prepared by wet granulation method. A three-factor, three levels Box-Behnken design was adopted for the optimization. The selected independent variables were amount of hydroxypropyl methylcellulose K 15M (X₁), sodium carboxy methylcellulose (X₂) and NaHCO₃ (X₃). The dependent variables were floating lag time (Y_FLT), cumulative percentage of metronidazole released at 6th h (Y₆) and cumulative percentage of metronidazole released at 12th h (Y₁₂). Physical properties, drug content, in vitro floating lag time, total floating time and drug release behavior were assessed.

Results: Y_FLT range was found to be from 1.02 to 12.07?min. The ranges of other responses, Y₆ and Y₁₂ were 25.72?±?2.85 to 77.14?±?3.42 % and 65.47?±?1.25 to 99.65?±?2.28 %, respectively. Stability studies revealed that no significant change in in vitro floating lag time, total floating time and drug release behavior before and after storage.

Conclusion: It can be concluded that a combination of hydroxypropyl methylcellulose K 15M, sodium carboxy methylcellulose and NaHCO₃ can be used to increase the gastric residence time of the dosage form to improve local effect of metronidazole.     

Production of extended release mini-tablets using directly compressible grades of HPMC

Context: Hypromellose (HPMC) has been previously used to control drug release from mini-tablets. However, owing to poor flow, production of mini-tablets containing high HPMC levels is challenging. Directly compressible (DC) HPMC grades have been developed by Dow Chemical Company.

Objective: To compare the properties of HPMC DC (METHOCEL? K4M and K100M) with regular (REG) HPMC grades.

Method: Particle size distribution and flowability of HPMC REG and DC were evaluated. 3?mm mini-tablets, containing hydrocortisone or theophylline as model drugs and 40% w/w HPMC DC or REG were produced. Mini-tablets containing HPMC DC grades were manufactured using a rotary press simulator at forces between 2–4?kN and speeds of 5, 10, 15 or 20?rpm. Mini-tablets containing HPMC REG were produced manually.

Results and discussion: The improved flowability of HPMC DC grades, which have a narrower particle size distribution and larger particle sizes, meant that simulated large scale production of mini-tablets with good weight uniformity (CV 1.79–4.65%) was feasible. It was not possible to automatically manufacture mini-tablets containing HPMC REG due to the poor flowability of the formulations. Drug release from mini-tablets comprising HPMC DC and REG were comparable. Mini-tablets containing HPMC DC illustrated a higher tensile strength compared to mini-tablets made with HPMC REG. Mini-tablets produced with HPMC DC at different compression speeds had similar drug release profiles.

Conclusions: Production of extended release mini-tablets was successfully achieved when HPMC DC was used. Drug release rate was not influenced by the different HPMC DC grades (K4M or K100M) or production speed.     

Chitosan based mucoadhesive nanoparticles of ketoconazole for bioavailability enhancement: formulation,optimization, in vitro and ex vivo evaluation

Purpose: The conventional dosage form of Ketoconazole (KZ) shows poor absorption due to rapid gastric emptying. Chitosan based mucoadhesive nanoparticles (NPs) of KZ were developed to efficiently release drug at its absorption window i.e. stomach and the site of action i.e. esophagus.

Method: The NPs were prepared by ionic gelation method. Concentration of polymer, cross-linking agent and ratio of drug/polymer as well as polymer/cross linking agent were optimized.

Results: NPs had 69.16?±?5.91% mucin binding efficiency, particle size of 382.6?±?2.384?nm, ζ potential of +48.1?mv and entrapment efficiency of 59.84 ± 1.088%. DSC thermogram indicated absence of any drug polymer interaction. The drug release was by controlled, non-fickian diffusion mechanism. Ex vivo diffusion studies were performed by emptying the stomach contents after 2?h to simulate in vivo gastric emptying. The results showed that drug diffusion from the solution across stomach mucosa stopped after emptying whereas that from the NPs continued upto 5?h. Hence we could conclude that the NPs must have adhered to the stomach mucosa and thereby would have been retained at this absorption site even after gastric emptying.

Conclusion: The orally delivered KZ loaded mucoadhesive NPs can be used as an efficient carrier for delivering drug at its absorption window i.e. the stomach and the site of action i.e. esophagus even after gastric emptying.     

Formulation and ex vivo–in vivo evaluation of pH-triggered brimonidine tartrate in situ gel for the glaucoma treatment using application of 32 factorial design

Context: Short residence time, poor bioavailability and poor permeability are the major problems for conventional eye drops treatment.

Objective: The aim of this article is to develop, optimize and ex vivo–in vivo investigation of brimonidine tartrate in situ gel as compared to marketed eye drops for the treatment of glaucoma.

Materials and methods: The effect of independent variables, namely concentrations of polymers, on various dependent variables like viscosity at physiological pH and in vitro drug release were studied by using 3² factorial design. Further the optimized formulation was characterized for ex vivo and in vivo study.

Results and discussion: Experimental data demonstrated that optimized in situ gel formulation (F8) showed in vitro–ex vivo sustained release profile with polymer composites carbopol 974P and HPMC K4M. After 5?h of ex vivo transcorneal permeation study, the amount recovered from the corneal surface on the donor chamber 12.40% (124 ug) and the amount collected from the receptor chamber 76.8% (760 ug) of the initial dose 1?mg. The total amount recovered from the permeation experiment was 89.2%. Bioadhesive carbopol 974P and viscosity HPMC K4M composites optimized formulation (F 8) produce greater influence on the duration of drug action and improved intraocular pressure reduction activity as compared to marketed eye drop solution in in vivo study.

Conclusion: The developed in situ gelling system as a promising ophthalmic formulation to prolong the drug lowering effect on the intraocular pressure.     

Nanosized nasal emulgel of resveratrol: preparation,optimization, in vitro evaluation and in vivo pharmacokinetic study

Abstract

Nano-emulgel has become one of the most significant controlled release systems, which has the advantages of both gels and nano-emulsions. This work aims at the formulation of nasal nano-emulgel for resveratrol, employing carbopol 934 and poloxamer 407 as the gelling agents. The optimum nano-emulsion was determined through further characterization of the selected system. The nasal nano-emulgel was prepared and tested for the in vitro release, the release kinetics, FTIR, ex vivo permeation, nasal mucosa toxicity, and in vivo pharmacokinetic study. The optimum nano-emulsion consisted of Tween 20, Capryol 90, and Transcutol at a ratio of (54.26: 23.81: 21.93%v/v), and it exhibited transmittance of 100%, resveratrol solubility of 159.9?±?6.4?mg/mL, globule size of 30.65?nm. The in vitro resveratrol released from nano-emulsion and nasal nano-emulgel was 96.17?±?4.43% and 78.53?±?4.7%, respectively. Ex vivo permeation was sustained during 12?h up to 63.95?±?4.7%. The histopathological study demonstrated that the formula is safe and tolerable to the nasal mucosa. C_max and AUC _(0–∞) of resveratrol obtained after nasal administration of nasal nano-emulgel was 2.23 and 8.05 times, respectively. Similarly, T_max was increased up to 3.67?±?0.82?h. The optimized nasal nano-emulgel established intranasal safety and bioavailability enhancement so it is considered as a well-designed system to target the brain.     

Development and optimization of press coated tablets of release engineered valsartan for pulsatile delivery

The present work is aimed to develop and optimize pulsatile delivery during dissolution of an improved formulation of valsartan to coordinate the drug release with circadian rhythm. Preliminary studies suggested that β cyclodextrin could improve the solubility of valsartan and showed A_L type solubility curve. A 1:1 stoichiometric ratio of valsartan to β cyclodextrin was revealed from phase solubility studies and Job’s plot. The prepared complex showed significantly better dissolution efficiency (p?<?0.05) compared to pure drug, which could be due to the formation of inclusion complex as revealed from FTIR and DSC studies. Continuous dissolution-absorption studies revealed that absorption of drug from valsartan β cyclodextrin complex was significantly higher (p?2 full factorial design was used to measure the response of HPMC K4M and EC on lag time and time taken for 90% drug release (T90). The optimized batch prepared according to the levels obtained from the desirability function had a lag time of 6?h and consisted of HPMC K4M:ethylcellulose in a 1:1.5 ratio with 180?mg of coating and revealed a close agreement between observed and predicted value (R^2?=?0.9694).     

Development and validation of spectrophotometric and HPTLC methods for simultaneous determination of rosiglitazone maleate and metformin hydrochloride in the presence of interfering matrix excipients

Two simple methods have been developed and validated for the simultaneous determination of rosiglitazone maleate (ROS) and metformin hydrochloride (MET) in synthetic mixtures and coated tablets in a ratio of 1:250 (ROS:MET). The first method was a spectrophotometric one. The minor component, ROS was determined by measuring the values of absorbance at λ_max 312?nm and the D₁ amplitudes at 331?nm where MET shows no absorption contribution. However, absorbance interferences from tablet excipients were successfully corrected by D₁ at 331?nm zero-crossing technique. Study of spectral interference from tablet excipients was included in the text. Standard curves for A_max and D₁ methods were in the concentration range 20.0–80.0?μg?mL^?1. The major component, MET was determined both in binary mixtures and tablets by measuring its A_max at 236?nm. Extensive dilution eliminated any absorption contribution from the coexisting ROS or tablet matrix. Standard curves showed linearity in the concentration range 4.0–12.8?μg?mL^?1. The second method was based on high performance thin layer chromatography (HPTLC) separation of the two drugs followed by densitometric measurements of their spots at 230?nm. The separation was carried out on Merck HPTLC aluminium sheets of silica gel 60 F254 using methanol:water:NH₄Cl 1% w/v (5:4:1 v/v/v) as the mobile phase. Linear calibration graphs of peak area values were obtained versus concentrations in the range of 0.4–2.0?μg?band^?1 and 20.0–100.0?μg?band^?1 for ROS and MET, respectively. According to International Conference on Harmonisation (ICH) guidelines, different validation parameters were verified for the two methods and presented.     

Design and evaluation of mucoadhesive vaginal tablets of tenofovir disoproxil fumarate for pre-exposure prophylaxis of HIV

Objective: To design and evaluate novel, feasible, safe, mucoadhesive intravaginal tablets of tenofovir disoproxil fumarate (TDF).

Significance: It may provide pre-exposure prophylaxis for women against HIV.

Methods: TDF intravaginal tablets were formulated employing poylvinylpyrrolidone (PVP) as the matrix forming polymer and various mucoadhesive polymers such as carbopol 934, 940, chitosan, and sodium carboxymethylcellulose (SCMC). Wet granulation was used. The evaluation involved testing drug-excipient compatibility, precompression parameters such as percentage yield, bulk density and tapped density of the granules, Carr’s index, Hausner ratio, angle of repose, post compression parameters such as color, shape, physical dimensions, weight variation, hardness, friability, swelling index, assay, in vitro dissolution study and ex vivo mucoadhesion studies.

Results: Based on in vitro evaluation, C1 was selected as the best formulation and evaluated further for release kinetics, curve fitting analysis, absorption studies using liquid chromatography-mass spectrometry (LC-MS) technique and histopathological assessment in female Sprague–Dawley rats. C1 followed Higuchi model kinetics. Accelerated stability study was as per ICH guidelines by keeping C1 at 40?±?2?°C and 75?±?5% RH for six months.

Conclusions: C1 was selected as the best formulation due to better swelling index (65.93% at 24?h), prolonged release of 100.62% cumulative drug release (CDR) at 24?h, superior mucoadhesion force (35.93?×?10² dynes/cm²) and retention time (16?h). The study revealed that C1 remained stable for six months. C1 showed nil systemic absorption which is desirable and according to histopathological study, C1, exhibited minimal damage on the rat vaginal epithelium indicating safety.     

Effect of aminoalkyl methacrylate copolymer E/ HCl on in vivo absorption of poorly water-soluble drug

This study aimed to investigate in vivo absorption of tacrolimus formulated as a solid dispersion using Eudragit E^®/HCl (E-SD). E-SD is an aminoalkyl methacrylate copolymer that can be dissolved under neutral pH conditions. E-SD was used alone as a solid dispersion carrier and/or was mixed with tacrolimus primarily dispersed with hydroxypropylmethylcellulose (HPMC). Tacrolimus was formulated with E-SD at several different ratios. Formulations with tacrolimus/E-SD ratio of 1/3 showed higher in vivo absorption, compared to tacrolimus dispersed in the excipients (primarily HPMC) found in commercially available tacrolimus capsules, using a rat in situ closed loop method. Good correlation was observed between in vitro drug solubility and in vivo drug absorption. In vitro solubility tests and rat oral absorption studies of tacrolimus/HPMC solid dispersion formulations were also conducted after mixing the HPMC dispersion with several ratios of E-SD. E-SD/tacrolimus/HPMC formulations yielded high in vitro drug solubility but comparatively low in vivo absorption. Dog oral absorption studies were conducted using capsules containing a formulation of tacrolimus/E-SD at a ratio of 1/5. The E-SD formulation-containing capsule showed higher in vivo drug absorption than tacrolimus dispersed in the standard HPMC capsule. These studies report enhancement of the in vivo absorption of a poorly water-soluble drug following dispersion with E-SD when compared to formulation in HPMC.     

Preliminary evaluation of the in vitro release and in vivo absorption in rabbits of the modified-release dosage forms

Objective: The suitability of the rabbit as an animal model for the primary screening and selection of the pilot scale batches during the early stages of the formulation development was studied.

Materials and methods: Three modified-release formulations of aminophylline consisted of Carbopol® 971P/HPMC K4M (F-I), and HPMC K100M (F-II) or HPMC K4M (F-III) were used. Commercial products were Aminofilin retard 350?mg tablets, Srbolek, Serbia (R-I) and Phyllocontin^® 350, tablets Purdue Frederic, Canada (R-II).

Results: Calculated release rate constants and the ?2 values between R-I/F-I (84.1) and R-II/F-III (83.4) indicated similar in vitro release while the coefficient n showed presence of different mechanisms of release from Anomalous transport, Fickian diffusion to Case-II transport. Higher T_max, was found in the rabbits, dosed with F-II (12.00?h), F-III (10.50?h), and R-II (15.00?h) formulation. The highest C_max (9.22?mg/L) was obtained with F-II, similar lower values was seen for F-I and F-III, while commercial products showed the lowest values R-I (5.58?mg/L) and R-II (4.18?mg/L). Higher AUC values were detected for all three formulations (from 115.90 to 204.06 mgh/L) in relation to commercial products (105.33 and 113.25 mgh/L).

Discussion and conclusion: The results demonstrated a good correlation of Level A (r² = 0.97) for the two formulations (F-I, F-III) and commercial product (R-I) indicates that there is a reasonable assumption that the rabbit might be use as a model for the preliminary comparison of scale up formulations in the early stages of the product development.     

Analytical‐Based Methodologies for Examining the In Vitro Absorption,Distribution, Metabolism,and Elimination (ADME) of Silver Nanoparticles

The clinical applications of silver nanoparticles (AgNPs) remain limited due to the lack of well‐established methodologies for studying their nanokinetics. Hereby, the primary goal is to adapt a suite of analytical‐based methodologies for examining the in vitro absorption, distribution, metabolism, and elimination of AgNPs. Vero 76 and HEK 293 cells are exposed to ≈10‐nm spherical AgNPs⁺ and AgNPs^? at relevant concentrations (0–300 µg mL^?1) and times (4–48 h). Absorption: Inductively coupled plasma optical emission spectroscopy (ICP‐OES) demonstrates that the two AgNP formulations are not bioequivalent. For example, different bioavailabilities (C _maximum < 20.7 ± 4% and 6.82 ± 0.4%), absorption times (T _maximum > 48 and ≈24 h), and absorption rate laws (first‐ and zeroth‐order at 300 µg mL^?1) are determined in Vero 76 for AgNPs⁺ and AgNPs^?, respectively. Distribution: Raman and CytoViva hyperspectral imaging show different cellular localizations for AgNPs⁺ and AgNPs^?. Metabolism: Cloud point extraction (CPE)‐tangential flow filtration (TFF) reveal that ≤ 11% ± 4% of the administered, sublethal AgNPs release Ag⁺ and contribute to the observed cytotoxicity. Elimination: ICP‐OES‐CPE suggests that AgNPs are cleared via exocytosis.     

The influence of HPMC concentration on release of theophylline or hydrocortisone from extended release mini-tablets

Context: Mini-tablets are compact dosage forms, typically 2–3 mm in diameter, which have potential advantages for paediatric drug delivery. Extended release (ER) oral dosage forms are intended to release drugs continuously at rates that are sufficiently controlled to provide periods of prolonged therapeutic action following each administration, and polymers such as hypromelllose (HPMC) are commonly used to produce ER hydrophilic matrices.

Objective: To develop ER mini-tablets of different sizes for paediatric delivery and to study the effects of HPMC concentration, tablet diameter and drug solubility on release rate.

Methods: The solubility of Hydrocortisone and theophylline was determined. Mini-tablets (2 and 3 mm) and tablets (4 and 7 mm) comprising theophylline or hydrocortisone and HPMC (METHOCEL? K15M) at different concentrations (30, 40, 50 and 60%w/w) were formulated. The effect of tablet size, HPMC concentration and drug solubility on release rate and tensile strength was studied.

Results and Discussion: Increasing the HPMC content and tablet diameter resulted in a significant decrease in drug release rate from ER mini-tablets. In addition, tablets and mini-tablets containing theophylline produced faster drug dissolution than those containing hydrocortisone, illustrating the influence of drug solubility on release from ER matrices. The results indicate that different drug release profiles and doses can be obtained by varying the polymer content and mini-tablet diameter, thus allowing dose flexibility to suit paediatric requirements.

Conclusion: This work has demonstrated the feasibility of producing ER mini-tablets to sustain drug release rate, thus allowing dose flexibility for paediatric patients. Drug release rate may be tailored by altering the mini-tablet size or the level of HPMC, without compromising tablet strength.     

In situ intestinal permeability and in vivo absorption characteristics of olmesartan medoxomil in self-microemulsifying drug delivery system

To characterize the intestinal absorption behavior of olmesartan medoxomil (OLM) and to evaluate the absorption-improving potential of a self-microemulsifying drug delivery system (SMEDDS), we performed in situ single-pass intestinal perfusion (SPIP) and in vivo pharmacokinetic studies in rats. The SPIP study revealed that OLM is absorbed throughout whole intestinal regions, favoring proximal segments, at drug levels of 10–90 μM. The greatest value for effective permeability coefficient (P_eff) was 11.4?×?10^?6 cm/s in the duodenum (90 μM); the lowest value was 2.9?×?10^?6 cm/s in the ileum (10 μM). A SMEDDS formulation consisting of Capryol 90, Labrasol, and Transcutol, which has a droplet size of 200?nm and self-dispersion time of 21 s, doubled upper intestinal permeability of OLM. The SMEDDS also improved oral bioavailability of OLM in vivo: a 2.7-fold increase in the area under the curve (AUC) with elevated maximum plasma concentration (C_max) and shortened peak time (T_max) compared to an OLM suspension. A strong correlation (r²?=?0.955) was also found between the in situ jejunal P_eff and the in vivo AUC values. Our study illustrates that the SMEDDS formulation holds great potential as an alternative to increased oral absorption of OLM.     

High‐Throughput,Protein‐Targeted Biomolecular Detection Using Frequency‐Domain Faraday Rotation Spectroscopy

A clinically relevant magneto‐optical technique (fd‐FRS, frequency‐domain Faraday rotation spectroscopy) for characterizing proteins using antibody‐functionalized magnetic nanoparticles (MNPs) is demonstrated. This technique distinguishes between the Faraday rotation of the solvent, iron oxide core, and functionalization layers of polyethylene glycol polymers (spacer) and model antibody–antigen complexes (anti‐BSA/BSA, bovine serum albumin). A detection sensitivity of ≈10 pg mL^?1 and broad detection range of 10 pg mL^?1 ? c_BSA ? 100 µ g mL^?1 are observed. Combining this technique with predictive analyte binding models quantifies (within an order of magnitude) the number of active binding sites on functionalized MNPs. Comparative enzyme‐linked immunosorbent assay (ELISA) studies are conducted, reproducing the manufacturer advertised BSA ELISA detection limits from 1 ng mL^?1 ? c_BSA ? 500 ng mL^?1. In addition to the increased sensitivity, broader detection range, and similar specificity, fd‐FRS can be conducted in less than ≈30 min, compared to ≈4 h with ELISA. Thus, fd‐FRS is shown to be a sensitive optical technique with potential to become an efficient diagnostic in the chemical and biomolecular sciences.     

Thermoresponsive ophthalmic poloxamer/tween/carbopol in situ gels of a poorly water-soluble drug fluconazole: preparation and in vitro–in vivo evaluation

The purpose of the present study was to optimize the formulations of the thermoresponsive ophthalmic in situ gels of a poorly water-soluble drug fluconazole (FLU) and evaluate the in vitro and in vivo properties of the formulations. The thermoresponsive ophthalmic FLU in situ gels were prepared by mixing FLU, Poloxamer407, Tween80, benzalkonium chloride and carbopol934 in borate buffer solution. The in vivo eye irritation tests and ophthalmic absorption were carried out in rabbits. The formulation compositions influenced the physicochemical properties of FLU in situ gels. The amount of poloxamer407 in the formulation was the main factor that affected the sol–gel transition temperature of the products. Tween80 not only improved the solubility of the FLU but also affected the products’ sol–gel transition temperature. In this study, sol–gel transition temperature was not affected by carbopol934. However, carbopol934 affected pH value, transparency and gelling capacity of the products. The product of the optimized formulation was a pseudoplastic fluid and its sol–gel transition temperature was 30.6?±?1.2?°C. The autoclaving test showed that the sol–gel transition temperature, the flow ability and the flow behavior of the test samples did not change obviously after autoclaving sterilization at 121?°C and 15?psi for 20?min, thus the autoclaving was an acceptable sterilization method for this preparation. The thermoresponsive ophthalmic FLU in situ gels’ in vivo ophthalmic absorption was superior to the conventional FLU eye drop. In conclusion, the thermoresponsive ophthalmic FLU in situ gel is a better alternative than the FLU eye drop.     

The efficacy of anti-VEGF antibody-modified liposomes loaded with paeonol in the prevention and treatment of hypertrophic scars

The aim of this study was to investigate the efficacy of anti-VEGF antibody-modified Paeonol liposome gels (PAE-BEV-lip gels) in the prevention and treatment of hypertrophic scars (HS). Systematic optimization of the encapsulation process of anti-VEGF antibody-modified Paeonol liposomes (PAE-BEV-lips) was performed using Box–Behnken design with the optimized parameters as follows: SPC concentration of 7.36?mg mL^?1; SPC-Chol-PAE:pNP-PEG₃₀₀₀-DOPE:BVE-PEG₃₀₀₀-DOPE ratio of 14:5:4:0.28:0.05, w/w; the hydration temperature of 41?°C; stripping using pH 7.5 sodium dihydrogen phosphate buffer; and ultrasound for 3?min (ultrasound time 2?s, interval 3?s, power 300?W). Using these conditions, the encapsulation efficiency of PAE reached the peak level, i.e. 73.61?±?2.36%. The PAE-BEV-lips displayed unimodal size-distribution with a mean diameter of (235.7?±?4.67) nm and a zeta potential of –(5.13?±?0.25) mV. The investigation of the retention effect PAE-BEV-lip gels revealed a slower transdermal delivery rate, a remarkable dermal retention effect, and superior bioavailability compared to PAE gels and PAE conventional liposome gels (PAE-lip gels). Meanwhile, PAE-BEV-lip gels exhibited definite effects on the prevention and treatment of HS of the rabbit ears. The PAE-BEV-lip gels group showed a lower scar proliferation rate, fewer and looser collagenous fibers and fibromyocytes, more regular chondrocytes, less calcified tissue and fewer inflammatory cells compared to other groups. At the same time, PAE-BEV-lip gels significantly reduced scar hyperplasia index (1.34?±?0.51) and levels of VEGF, TGF-β₁ and TNF-α (30.90?±?3.57, 733.2?±?43.19 and 66.76?±?2.98?ng·L^?1, respectively), compared to the model group (p?<?.01).