Formulation design and optimization of novel soft glycerosomes for enhanced topical delivery of celecoxib and cupferron by Box–Behnken statistical design

Background: The present study describes glycerosomes (vesicles composed of phospholipids, glycerol and water) as a novel drug delivery system for topical application of celecoxib (CLX) and cupferron (CUP) compound.

Aim: The goal of this research was to design topical soft innovative vesicles loaded with CLX or CUP for enhancing the efficacy and avoiding systemic toxicity of CLX and CUP.

Methods: CLX and CUP loaded glycerosomes were prepared by hydrating phospholipid-cholesterol films with glycerol aqueous solutions (20–40%, v/v). Box–Behnken design, using Design-Expert® software, was the optimum choice to statistically optimize formulation variables. Three independent variables were evaluated: phospholipid concentration (X₁), glycerol percent (X₂) and tween 80 concentration (X₃). The glycerosomes particle size (Y₁), encapsulation efficiency percent (Y₂: EE %) and drug release (Y₃) were selected as dependent variables. The anti-inflammatory effect of CLX and CUP glycerosomal gel was evaluated by carrageenan-induced rat paw edema method followed by histopathological studies.

Results: The optimized formulations (CLX2* and CUP1*) showed spherical morphology under transmission electron microscopy, optimum particle size of 195.4?±?3.67?nm, 301.2?±?1.75?nm, high EE of 89.66?±?1.73%, 93.56?±?2.87%, high drug release of 47.08?±?3.37%, 37.60?±?1.89% and high cumulative amount of drug permeated in 8?h of 900.18?±?50.24, 527.99?±?34.90?µg.cm^?2 through hairless rat skin, respectively. They also achieved significant remarkable paw edema inhibition in comparison with the control group (p? Conclusion: Finally, the administration of CLX2* and CUP1* loaded glycerosomal gel onto the skin resulted in marked reduction of edema, congestive capillary and inflammatory cells and this approach may be of value in the treatment of different inflammatory disorders.     

Optimization and characterization of gastroretentive floating drug delivery system using Box-Behnken design

Context: One among many strategies to prolong gastric residence time and improve local effect of the metronidazole in stomach to eradicate Helicobacter pylori in the treatment of peptic ulcer was floating drug delivery system particularly effervescent gastroretentive tablets.

Objective: The objective of this study was to prepare and evaluate, effervescent floating drug delivery system of a model drug, metronidazole.

Methods: Effervescent floating drug delivery tablets were prepared by wet granulation method. A three-factor, three levels Box-Behnken design was adopted for the optimization. The selected independent variables were amount of hydroxypropyl methylcellulose K 15M (X₁), sodium carboxy methylcellulose (X₂) and NaHCO₃ (X₃). The dependent variables were floating lag time (Y_FLT), cumulative percentage of metronidazole released at 6th h (Y₆) and cumulative percentage of metronidazole released at 12th h (Y₁₂). Physical properties, drug content, in vitro floating lag time, total floating time and drug release behavior were assessed.

Results: Y_FLT range was found to be from 1.02 to 12.07?min. The ranges of other responses, Y₆ and Y₁₂ were 25.72?±?2.85 to 77.14?±?3.42 % and 65.47?±?1.25 to 99.65?±?2.28 %, respectively. Stability studies revealed that no significant change in in vitro floating lag time, total floating time and drug release behavior before and after storage.

Conclusion: It can be concluded that a combination of hydroxypropyl methylcellulose K 15M, sodium carboxy methylcellulose and NaHCO₃ can be used to increase the gastric residence time of the dosage form to improve local effect of metronidazole.     

Formulation,optimization, and evaluation of raft-forming formulations containing Nizatidine

Objective: The main objective of this research is to formulate, optimize, and evaluate raft-forming chewable tablets of Nizatidine. Various raft-forming agents were used in preliminary screening. Sodium alginate showed maximum raft strength, so tablets were prepared using sodium alginate as the raft forming agent, along with calcium carbonate (CaCO₃) as antacid and raft strengthening agent, and sodium bicarbonate (NaHCO₃) as a gas generating agent.

Research design and methods: Raft forming chewable tablets containing Nizatidine were prepared by direct compression and wet granulation methods, and evaluated for drug content, acid neutralization capacity, raft strength, and in-vitro drug release in 0.1?N HCl. Box–Behnken design was used for optimization.

Results: Two optimized formulations were predicted from the design space. The first optimized recommended concentrations of the independent variables were predicted to be X₁?=?275.92?mg, X₂?=?28.60?mg, and X₃?=?202.14?mg for direct compression technique and the second optimized recommended concentrations were predicted to be X₁?=?253.62?mg, X₂?=?24.60?mg, and X₃?=?201.77?mg for wet granulation technique. Optimized formulations were stable at accelerated environmental testing for six months at 35?°C and 45?°C with 75% relative humidity. X-Ray showed that the raft floated immediately after ingestion and remained intact for ～3?h.

Conclusion: Raft was successfully formed and optimized. Upon chewing tablets, a raft is formed on stomach content. That results in rapid relief of acid burning symptoms and delivering the drug into systemic circulation with enhanced bioavailability.     

Pharmacokinetic properties and bioequivalence of candesartan cilexetil in Korean healthy volunteers

Candesartan is a long-acting and selective nonpeptide AT₁ subtype angiotensin II receptor antagonist. The aim of this study was to compare the pharmacokinetics and to evaluate the bioequivalence of two candesartan cilexetil 16?mg formulations. Forty healthy volunteers were randomly assigned into two groups. After a single dose of 16?mg candesartan cilexetil oral administration, blood samples were collected at specific time intervals from 0–36?h. The plasma concentrations of candesartan cilexetil were determined by LC-MS/MS. The pharmacokinetic parameters such as AUC_last, AUC_inf and C_max were calculated and the 90% confidence intervals of the ratio (test/reference) pharmacokinetic parameters were obtained by analysis of variance on logarithmically transformed data. The mean for AUC_last in the reference and the test drug were 1530.1?±?434.6 and 1315.7?±?368.6 ng·h/mL. The mean for AUC_inf in the reference and the test drug were 1670.0?±?454.5 and 1441.2?±?397.8 ng·h/mL. The mean value for C_max in the reference and the test drug was 142.6?±?41.0 and 134.9?±?41.4?ng/mL. The 90% confidence intervals for the AUC_last, AUC_inf and C_max were in the range of log 0.81–log 0.91, log 0.81–log 0.91 and log 0.88–log1.01, respectively. No adverse events were reported by subjects or found on analysis of vital signs or laboratory tests. This single dose study found that the test and reference products met the regulatory criteria for bioequivalence in these health volunteers. Both formulations were safe and well tolerated in 16?mg of candesartan cilexetil hydrochloride.     

Development of zolmitriptan transfersomes by Box–Behnken design for nasal delivery: in vitro and in vivo evaluation

The aim was to prepare an optimized zolmitriptan (ZT)-loaded transfersome formulation using Box–Behnken design for improving the bioavailability by nasal route for quick relief of migraine and further to compare with a marketed nasal spray. Here, three factors were evaluated at three levels. Independent variables include: amount of soya lecithin (X₁), amount of drug (X₂) and amount of tween 80 (X₃). The dependent responses were vesicle size (Y₁), flexibility index (Y₂) and regression coefficient of drug release kinetics (Y₃). Prepared formulations were evaluated for physical characters and an optimal system was identified. Further, in vivo pharmacokinetic study was performed in male wistar rats to compare the amount of drug in systemic circulation after intranasal administration. Optimized ZT-transfersome formulation containing 82.74?mg of lecithin (X₁), 98.37?mg of zolmitriptan (X₂) and 32.2?mg of Tween 80 (X₃) and had vesicle size of 93.3?nm, flexibility index of 20.25 and drug release regression coefficient of 0.992. SEM picture analysis revealed that the vesicles were spherical in morphology and had a size more than 1?µm. The formulations were found to be physically stable upon storage at room temperature up to 2?months period, as there were no significant changes noticed in size and ZP. The nasal bioavailability of optimized transfersome formulation was found to be increased by 1.72 times than that of marketed nasal spray (Zolmist^®). The design and development of zolmitriptan as transfersome provided improved nasal delivery over a conventional nasal spray for a better therapeutic effect.     

A simple and sensitive method for determination of vitamins D3 and K1 in rat plasma: application for an in vivo pharmacokinetic study

Purpose: To develop and to validate a simple but sensitive method for determination of vitamins D₃ and K₁ in rat plasma.

Methods: The sample treatment included protein precipitation by cold acetonitrile, evaporation, reconstitution with methanol and filtration. The chromatography conditions included Xterra RP18 3.5?µm 4.6?×?100?mm column at ambient temperature and mobile phase consisting of methanol/water (93/7, v/v) at 0.5?mL/min flow rate. Vitamin D₃ and probucol were detected at 265?nm and vitamin K₁ at 239?nm. Rats were administered intravenously by 0.1?mg/kg of vitamin D₃ or K₁ and the blood samples were withdrawn pre-administration and at pre-determined time points post-administration. The pharmacokinetic analysis was performed using a non-compartmental approach.

Results: The calibration curves in rat plasma were linear up to 5000?ng/mL for both vitamins. The limit of quantification (LOQ) was 20?ng/mL for vitamin D₃ and 40?ng/mL for K₁. Inter- and intra-day precision and accuracy were below 15%. The pharmacokinetic parameters of vitamin D₃ following intravenous administration were: AUC_0?∞?=?11323?±?1081?h?×?ng/mL, V_d?=?218?±?80?mL/kg, CL?=?8.9?±?0.8?mL/h/kg, t_1/2?=?16.8?±?5?h; and of vitamin K₁: AUC_0?∞?=?2495?±?297?h?×?ng/mL, V_d?=?60?±24?mL/kg, CL?=?40.5?±?5.1?mL/h/kg, t_1/2?=?1.1?±0.5?h.

Conclusion: The developed HPLC–UV assay is a simple and sensitive method for the determination of vitamins D₃ and K₁ in rat plasma. A higher dose of vitamin K₁ should be used in future studies for accurate estimation of pharmacokinetic parameters. The data show the suitability of the assay for pharmacokinetic studies in rats.     

Improved dissolution rate and bioavailability of fenofibrate pellets prepared by wet-milled-drug layering

Objective: The objective of this study is to investigate the wet-milled-drug layering process which could significantly improve the dissolution rate and oral bioavailability of fenofibrate pellets.

Methods: Fenofibrate was milled with HPMC-E5 to prepare a uniform suspension in the micrometer and nanometer range, and this suspension was then layered on to sugar spheres to form the pellets (F1, F2).

Results: The particle size was significantly reduced (from 1000 µm to 1–10 µm and 400?nm) but the fenofibrate in suspension retained its crystallinity from the results of DSC and PXRD investigations. The dissolution rate of F1-F2 and Antara® capsules was 55.47 %, 61.27 % and 58.43 %, respectively, in 0.01?mol/L SDS solution over 60?min. In addition, F1, F2, and Antara® capsules were given orally to 6 beagle dogs to determine the bioavailability. The C_max of F1, F2 (8.21?±?2.55 and 9.33?±?2.37 μg/mL)and the AUC_(0?t) of F1, F2 (152.46?±?78.89 and 172.17?±?67.58 μg/mL·h)were higher than those of Antara® (6.02?±?3.34 μg/mL and 89.82?±?46.46 μg/mL·h) and, F1, F2 reached their C_max earlier than Antara® (F1: 2.0?±?1.1?h; F2: 1.8?±?1.2?h; Antara®: 6.0?±?8.9?h).

Conclusion: These results show that the wet-milled-drug layering technique is a powerful method to improve the dissolution rate and the bioavailability of fenofibrate.     

Nanocarrier-based topical drug delivery for an antifungal drug

Objective: The conventional liposomal amphotericin B causes many unwanted side effects like blood disorder, nephrotoxicity, dose-dependent side effects, highly variable oral absorption and formulation-related instability. The objective of the present investigation was to develop cost-effective nanoemulsion as nanocarreir for enhanced and sustained delivery of amphotericin B into the skin.

Methods and characterizations: Different oil-in-water nanoemulsions were developed by varying the composition of hydrophilic (Tween® 80) surfactants and co-surfactant by the spontaneous titration method. The developed formulation were characterized, optimized, evaluated and compared for the skin permeation with commercial formulation (fungisome 0.01% w/w). Optimized formulations loaded with amphotericin B were screened using varied concentrations of surfactants and co-surfactants as decided by the ternary phase diagram.

Results and discussion: The maximum % transmittance obtained were 96.9?±?1.0%, 95.9?±?3.0% and 93.7?±?1.2% for the optimized formulations F-I, F-III and F-VI, respectively. These optimized nanoemulsions were subjected to thermodynamic stability study to get the most stable nanoemulsions (F-I). The results of the particle size and zeta potential value were found to be 67.32?±?0.8 nm and –3.7?±?1.2?mV for the final optimized nanoemulsion F-I supporting transparency and stable nanoemulsion for better skin permeation. The steady state transdermal flux for the formulations was observed between 5.89?±?2.06 and 18.02?±?4.3?µg/cm²/h whereas the maximum enhancement ratio were found 1.85- and 3.0-fold higher than fungisome and drug solution, respectively, for F-I. The results of the skin deposition study suggests that 231.37?±?3.6?µg/cm² drug deposited from optimized nanoemulsion F-I and 2.11-fold higher enhancement ratio as compared to fungisome. Optimized surfactants and co-surfactant combination-mediated transport of the drug through the skin was also tried and the results were shown to have facilitated drug permeation and skin perturbation (SEM).

Conclusion: The combined results suggested that amphotericin B nanoemulsion could be a better option for localized topical drug delivery and have greater potential as an effective, efficient and safe approach.     

Sigma-2 receptor ligand anchored telmisartan loaded nanostructured lipid particles augmented drug delivery,cytotoxicity, apoptosis and cellular uptake in prostate cancer cells

Recently, the anticancer activity of telmisartan (TEL) has been discovered against prostate cancer. Nevertheless, despite favorable therapeutic profile, poor aqueous solubility and suboptimal oral bioavailability hamper the anticancer efficacy of TEL. Therefore, in this investigation, sigma-2 receptor ligand, 3-(4-cyclohexylpiperazine-1-yl) propyl amine (CPPA) anchored nanostructured lipid particles of telmisartan (CPPA-TEL-NLPs) were engineered using stearic acid for targeting prostate cancer, PC-3 cells. The mean particle size of TEL-NLPs was measured to be 25.4?±?3.2?nm, significantly (p?p?p?In vitro drug release study was conducted to determine the drug delivery potential of tailored nanoparticles. TEL-NLPs released 93.36% of drug significantly (p?50 of CPPA-TEL-NLPs was measured to be 20.3?µM significantly (p?50 of 41.3?µM, significantly (p?>?0.05) not different from 43.4?µM, exhibited by TEL-NLPs in PNT-2 cells. We elucidated that CPPA-TEL-NLPs entered the PC-3 cells via receptor mediated endocytosis pathway and thus exhibited superior cytotoxicity, apoptosis and greater extent of cellular uptake in PC-3 cells. In conclusion, CPPA-TEL-NLPs may be a promising nanomedicine and warrant further in vivo investigations for gaining clinical success.     

Development and evaluation of nanosized niosomal dispersion for oral delivery of Ganciclovir

Encapsulation of Ganciclovir in lipophilic vesicular structure may be expected to enhance the oral absorption and prolong the existence of the drug in the systemic circulation. So the purpose of the present study was to improve the oral bioavailability of Ganciclovir by preparing nanosized niosomal dispersion. Niosomes were prepared from Span40, Span60, and Cholesterol in the molar ratio of 1:1, 2:1, 3:1, and 3:2 using reverse evaporation method. The developed niosomal dispersions were characterized for entrapment efficiency, size, shape, in vitro drug release, release kinetic study, and in vivo performance. Optimized formulation (NG8; Span60:Cholesterol 3:2 molar ratio) has shown a significantly high encapsulation of Ganciclovir (89?±?2.13%) with vesicle size of 144?±?3.47?nm (polydispersity index [PDI]?=?0.08). The in vitro release study signifies sustained release profile of niosomal dispersions. Release profile of prepared formulations have shown that more than 85.2?±?0.015% drug was released in 24?h with zero-order release kinetics. The results obtained also revealed that the types of surfactant and Cholesterol content ratio altered the entrapment efficiency, size, and drug release rate from niosomes. In vivo study on rats reveals five-time increment in bioavailability of Ganciclovir after oral administration of optimized formulation (NG8) as compared with tablet. The effective drug concentration (>0.69 µg/mL in plasma) was also maintained for at least 8?h on administration of the niosomal formulation. In conclusion, niosomes can be proposed as a potential oral delivery system for the effective delivery of Ganciclovir.     

Vitamin B12 buccoadhesive tablets: auspicious non-invasive substitute for intra muscular injection: formulation,in vitro and in vivo appraisal

Attempting to prepare a convenient bioavailable formulation of vitamin B₁₂ (cyanocobalamin), 17 tablet formulations were prepared by direct compression. Different concentrations of hydroxypropyl methyl cellulose (HPMC), carbopol 971p (CP971p), and chitosan (Cs) were used. The tablets were characterized for thickness, weight, drug content, hardness, friability, surface pH, in vitro drug release, and mucoadhesion. Kinetic analysis of the release data was conducted. Vitamin B₁₂ bioavailability from the optimized formulations was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neurotone^® I.M. injection was used for comparison. HPMC (F1-F4), CP971p (F5-F8), and HPMC/CP971p (F12-F15)-based formulations showed acceptable mechanical properties. The formulated tablets showed maximum swelling indices of 232?±?0.13. The surface pH values ranged from 5.3?±?0.03 to 6.6?±?0.02. Bioadhesive force ranged from 66?±?0.6 to 150?±?0.5?mN. Results showed that CP971p-based tablets had superior in vitro drug release, mechanical, and mucoadhesive properties. In vitro release date of selected formulations were fitted well to Peppas model. HPMC/CP971p-based formulations showed bioavailability up to 2.7-folds that of Neurotone^® I.M. injection.     

Tracking the effect of microspheres size on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot in vitro and in vivo

The effects of particle size of microspheres on the drug release from a microsphere/sucrose acetate isobutyrate (SAIB) hybrid depot (m-SAIB) was investigated to develop a long-term sustained release drug delivery system with low burst release both in vitro and in vivo. A model drug, risperidone, was first encapsulated into PLGA microspheres with different particle sizes using conventional emulsification and membrane emulsification methods. The m-SAIB was prepared by dispersing the risperidone-microspheres in the SAIB depot. The drug release from m-SAIB was double controlled by the drug diffusion from the microspheres into SAIB matrix and the drug diffusion from the SAIB matrix into the medium. Large microspheres (18.95?±?18.88?µm) prepared by the conventional homogenization method exhibited porous interior structure, which contributed to the increased drug diffusion rate from microspheres into SAIB matrix. Consequently, m-SAIB containing such microspheres showed rapid initial drug release (C_max?=_?110.1?±54.2?ng/ml) and subsequent slow drug release (C_s(4–54d)=?2.7?±?0.8?ng/ml) in vivo. Small microspheres (5.91?±?2.24?µm) showed dense interior structure with a decreased drug diffusion rate from microspheres into SAIB matrix. The initial drug release from the corresponding m-SAIB was significantly decreased (C_max?=_?40.9?±?13.7?ng/ml), whereas the drug release rate from 4 to 54 d was increased (C_s(4–54d)=4.1?±?1.0?ng/ml). By further decreasing the size of microspheres to 3.38?±?0.70?µm, the drug diffusion surface area was increased, which subsequently increased the drug release from the m-SAIB. These results demonstrate that drug release from the m-SAIB can be tailored by varying the size of microspheres to reduce the in vivo burst release of SAIB system alone.     

Preparation,characterization and in vitro and in vivo evaluation of a solid dispersion of Naringin

Naringin (NA) is one of typical flavanone glycosides widely distributed in nature and possesses several biological activities including antioxidant, anti-inflammatory, and antiapoptotic. The aim of this study was to develop solid dispersion (SD) and to improve the dissolution rate and oral bioavailability of NA. NA–SD was prepared by the traditional preparation methods using PEG6000, F68, or PVP K30 as carrier at different drug to carrier ratios. According to the results of solubility and in vitro dissolution test, the NA–PEG6000 (1:3) SD was considered as an optimal formulation to characterize by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry and powder X-ray diffraction. Furthermore, oral bioavailabilities of NA–PEG6000 (1:3) SD and NA–suspension with the same dosage were investigated in SD rats. The results confirmed the formation of SD and the pharmacokinetic parameters of NA–PEG6000 (1:3) SD (C_max?=?0.645?±?0.262?µg/ml, AUC_0–t?=?0.471?±?0.084?µg/ml?h) were higher than that of NA–suspension (C_max?=?0.328?±?0.183?µg/ml, AUC_0–t =?0.361?±?0.093?µg/ml?h). Based on the results, the SD is considered as a promising approach to enhance the dissolution rate and oral bioavailability of NA.     

Enhanced stability and permeation potential of nanoemulsion containing sefsol-218 oil for topical delivery of amphotericin B

Aim: To characterize the enhanced stability and permeation potential of amphotericin B nanoemulsion comprising sefsol-218 oil at varying pH and temperature of aqueous continuous phase.

Methodology: Several batches of amphotericin B loaded nanoemulsion were prepared and evaluated for their physical and chemical stability at different pH and temperature. Also, a comparative study of ex vivo drug permeation across the albino rat skin was investigated with commercial Fungisome® and drug solution at 37?°C for 24?h. The extent of drug penetrated through the rat skin was thereby evaluated using the confocal laser scanning microscopy (CLSM).

Results and conclusions: The optimized nanoemulsion demonstrated the highest flux rate 17.85?±?0.5?µg/cm²/h than drug solution (5.37?±?0.01?µg/cm²/h) and Fungisome® (7.97?±?0.01?µg/cm²/h). Ex vivo drug penetration mechanism from the developed formulations at pH 6.8 and pH 7.4 of aqueous phase pH using the CLSM revealed enhanced penetration. Ex vivo drug penetration studies of developed formulation comprising of CLSM revealed enhanced penetration in aqueous phase at pH 6.8 and 7.4. The aggregation behavior of nanoemulsion at both the pH was found to be minimum and non-nephrotoxic. The stability of amphotericin B was obtained in terms of pH, optical density, globular size, polydispersity index and zeta potential value at different temperature for 90 days. The slowest drug degradation was observed in aqueous phase at pH 7.4 with shelf life 20.03-folds higher when stored at 4?°C (3.8 years) and 5-fold higher at 25?°C (0.951 years) than at 40?°C. The combined results suggested that nanoemulsion may hold an alternative for enhanced and sustained topical delivery system for amphotericin B.     

Development and uniform evaluation of ropinirole osmotic pump tablets with REQUIP XL both in vitro and in beagle dogs

REQUIP XL, prolonged release formulation of ropinirole hydrochloride (RH) in market, could release ropinirole constantly and showed satisfactory therapeutic effect and good compliance. REQUIP XL was composed of more than 10 kinds of excipients and prepared by Geomatrix technology, which was complex and laborious. The purpose of this study was to obtain a dosage form of RH with similar in vitro release profile and bioequivalence in vivo compared to REQUIP XL. Osmotic pump tablet combined with fast release phase was selected as the delivery system of RH and similar release curves were obtained in different media. The tablets were also administered to beagle dogs and the pharmacokinetic parameters were calculated using a non-compartmental model. C_max, t_max, mean residence time (MRT), and area under the curve from 0 to 24?h (AUC_0–24) were 3.97?±?0.53?ng/mL, 3.58?±?0.49?h, 8.29?±?0.93?h, and 35.20?±?8.11?ng/mL???h for ropinirole osmotic pump tablets (ROPT) and 4.15?±?1.07?ng/mL, 2.92?±?0.49?h, 7.84?±?1.09?h, and 34.34?±?10.06?ng/mL???h for REQUIP XL. The log-transformed mean C_max and AUC_0–24 of ROPT were about 92.15% and 102.49% relative to that of REQUIP XL, respectively. The 90% confidence intervals of C_max and AUC_0–24 for ROPT were 75.69–115.31% and 88.89–122.30%, respectively. So it could be concluded that ROPT was uniform with REQUIP XL both in vitro and in beagles and the release profiles of Geomatrix technology may be obtained by osmotic pump combined with fast release technology.     

Bioavailability enhancement of baclofen by gastroretentive floating formulation: statistical optimization,in vitro and in vivo pharmacokinetic studies

Objectives: The study was aimed to improve bioavailability of baclofen by developing gastroretentive floating drug delivery system (GFDDS).

Methods: Preliminary optimization was done to select various release retardants to obtain minimum floating lag time, maximum floating duration and sustained release. Optimization by 3² factorial design was done using Polyox WSR 303 (X₁) and HPMC K₄M (X₂) as independent variables and cumulative percentage drug released at 6?h (Q6h) as dependent variable.

Results: Optimized formulation showed floating lag time of 4–5 s, floated for more than 12?h and released the drug in sustained manner. In vitro release followed zero ordered kinetics and when fitted to Korsemeyer Peppas model, indicated drug release by combination of diffusion as well as chain relaxation. In vivo floatability study confirmed floatation for more than 6?h. In vivo pharmacokinetic studies in rabbits showed C_max of 189.96?±?13.04?ng/mL and T_max of 4?±?0.35?h for GFDDS. The difference for AUC_(0–T) and AUC_(0–∞) between the test and reference formulation was statistically significant (p > 0.05). AUC_(0–T) and AUC_(0–∞) for GFDDS was 2.34 and 2.43 times greater than the marketed formulation respectively.

Conclusion: GFDDS provided prolonged gastric residence and showed significant increase in bi oavailability of baclofen.     

Mechanical properties and failure mechanisms of composite laminates with classical fabric stacking patterns

In the design of composite materials, the properties and failure modes/mechanisms are always of the main concern. In this work, the mechanical properties and failure mechanisms of composite laminates with classical fabric stacking patterns ([(0, 90)]₈ and [(0, 90)/(±?45)]₄) were systematically investigated through mechanical experiments and FEM (finite element method) numerical simulations. The results show that the tensile modulus and bending modulus of the laminates were reduced by 22.2% and 37% after partially changing the stacking angle to?±?45°, but corresponding elongation and bending displacement were increased by 8.8% and 11.7%, respectively. Bending failure mode changes from complete fracture to partial fracture. Meanwhile, the delamination damage and tow peeling from the matrix increase significantly. FEM simulations on tensile and bending processes of the composites indicate that the?±?45° stacking angle leads to the change of the axial stress direction from S_X (0°) to S_Y (±?45°), which is difficult to be observed from mechanical experiments. The FEM simulation provides a cost effective and efficient way for the structural visual optimization design and failure prediction of the actual composite materials.

     

Dynamic electrostatic charge of lactose-salbutamol sulphate powder blends dispersed from a Cyclohaler®

Context: Electrostatic forces have been claimed to be a mechanism for aerosol deposition in the lungs. However, the extent of its influence on aerosol performance is not clear, particularly for carrier-drug formulations.

Objectives: To prepare lactose-salbutamol powder blends, varying in blend ratio, and identify any relationships between salbutamol dose, electrostatic characteristics and in vitro aerosol performance.

Methods: Decanted lactose and micronized salbutamol sulfate was mixed to produce five blends (equivalent to 50, 100, 200, 300 and 400 µg salbutamol per 33?mg of powder). 33?±?1?mg of a blend was loaded into a Cyclohaler? and dispersed into the electrical Next Generation Impactor (eNGI) at an air flow rate of 60?L/min. This was conducted in triplicate for all five lactose-salbutamol blends.

Results: Fine particle fraction increased with salbutamol dose, from 5.89?±?1.42 to 21.35?±?2.91%. Specific charge (charge divided by mass) distributions for each blend were greatest in magnitude for the 50 µg blend and similar in magnitude between all other blends. However, in eNGI Stage 1 (>8.06?µm), specific charge decreased from 100 µg (?170.4?±?45.8 pC/µg) to 400 µg (?10.0?±?9.1 pC/µg).

Conclusions: The improvement in fine particle fraction with increased salbutamol dose was indicative of fine drug binding to high and low energy sites on the lactose carrier surface. This finding was supported by electrostatic charge results, but the aerosol charge itself was not found to influence aerosol performance by electrostatic forces.     

The effect of nanoliposomal formulations on Staphylococcus epidermidis biofilm

Objective: The aim of the present study was to assess the in vitro antimicrobial activities of nanoliposomal formulations loaded with vancomycin or/and rifampin against the biofilm formed by Staphylococcus epidermidis at 37?°C under aerobic condition.

Materials and methods: Liposomal formulations were prepared by dehydration-rehydration (DRV) method and characterized for size, zeta potential and encapsulation efficacy. The ability of different formulations on eradication of bacterial biofilm was assessed through optical density ratio (OD_r) and the results implicate higher survival rates of S. epidermidis on biofilm. Positive control was defined as an OD_r?=?1.0.

Results: The zeta potential of anionic, cationic and PEGylated liposomes was ?35?±?2, 35?±?1 and 27?±?2?mV whereas the mean sizes of these liposomal formulations were 145?±?4, 134?±?1 and 142?±?6?nm, respectively. Encapsulation efficacy of rifampin and vancomycin was more than 60% and about 25%, respectively. Cationic liposomal rifampin lowered the OD_r to 0.61 and was the most effective formulations against S. epidermidis biofilm (p?Conclusion: The results of this study showed that rifampin-loaded liposomes were effective against bacterial biofilm.