Design and evaluation of soluble ocular drug insert for controlled release of ciprofloxacin hydrochloride

Purpose: Soluble ocular inserts of ciprofloxacin hydrochloride were prepared with the aim of achieving once a day administration. Design: Drug reservoir was prepared using natural hydrophilic polymer viz. gelatin while rate-controlling membrane was prepared using hydrophobic ethyl cellulose. Ocular inserts were evaluated for their physicochemical parameters like thickness, weight uniformity, drug content, percent moisture loss, and percent moisture absorption. The in vitro drug release studies were carried out using Bi-chambered donar receiver compartment model. Since targeted prolong release was observed in formulation CF2 and CF5, these formulations were further subjected to in vivo drug release study using rabbits as an animal model. In vitro drug release kinetic data was treated according to Zero, First, and Higuchi kinetics to access the mechanism of drug release. Results: Correlation between in vitro and in vivo drug release was found to be strong revealing the efficacy of the formulation. Conclusion: Formulation CF5 has achieved target of present study such as increase residence time, prolong drug release, reduction in frequency of administration, and, thus may improve the patient compliance.     

时间控制/pH依赖型盐酸黄连素结肠给药系统的控释性能

以全硅MCM-41介孔分子筛为主体,以盐酸黄连素(BH)药物分子为客体,利用天然高分子海藻酸钠(SA)和壳聚糖(CS)为包覆材料,通过振荡吸附-浸提法制备了时间控制/pH依赖型BH/MCM-41/CS-SA结肠给药系统。利用XRD、SEM、BET、FTIR等技术对其理化性质进行了表征,并采用分光光度法对其载药和体外释药性能进行了评价。结果表明,BH/MCM-41/CS-SA的载药率为23.5%,载药后未破坏MCM-41的介孔结构。体外释放结果表明,相较BH/MCM-41,BH/MCM-41/CS-SA具有显著的时滞/pH依赖敏感释药特征,具备较好的结肠靶向给药性能,还具有长效控缓释放效果。     

Evaluation and Controlled Release Characteristics of Modified Xanthan Films for Transdermal Delivery of Atenolol

ABSTRACT

The present study was performed to evaluate the possibility of using modified xanthan films as a matrix system for transdermal delivery of atenolol (ATL), which is an antihypertensive drug. Acrylamide was grafted onto xanthan gum (XG) by free radical polymerization using ceric ion as an initiator. Fourier transform infrared spectroscopy and differential scanning calorimetry indicated the formation of the graft copolymer. The obtained graft copolymer was loaded with ATL and films were fabricated by solution casting method for transdermal application. Various formulations were prepared by varying the grafting ratio, drug loading, and different penetration enhancers. The formulations prepared were characterized for weight, thickness uniformity, water vapor transmission rate, and uniformity in drug content of the matrix. All the thin films were slightly opaque, smooth, flexible, and permeable to water vapor, indicating their permeability characteristics suitable for transdermal studies. Fourier transform infrared spectroscopy and differential scanning calorimetry studies indicated no significant interactions between drug and polymer. Drug is distributed uniformly in the matrix but showed a slight amorphous nature. Drug-loaded films were analyzed by X-ray diffraction to understand the drug polymorphism inside the films. Scanning electron microscopic studies of the placebo and drug-loaded films demonstrated a remarkable change in their surface morphology. The skin irritation tests were performed in mice and these results suggested that both placebo and drug-loaded films produced negligible erythema and edema compared to formalin (0.8% v/v) as the standard irritant. The in vitro drug release studies were performed in phosphate buffer saline using a Keshary-Chien diffusion cell. Different formulations were prepared and variations in drug release profiles were observed. Release data were analyzed by using the Ritger and Peppas equation to understand the mechanism of drug release as well as the estimation of n values, which ranged between 0.41 and 0.53, suggesting a Fickian diffusion trend.     

Interaction of Verapamil Hydrochloride with Carbopol 934P and Its Effect on the Release Rate of the Drug and the Water Uptake of the Polymer Matrix

In the present study, investigation of the possibility of interaction of verapamil hydrochloride with Carbopol 934P using differential scanning calorimetric analysis and Fourier transform infrared analysis was performed. The effect of the drug-to-polymer ratio, the electrolyte concentration, and the pH of the medium on the extent of interaction of the drug with the polymer using 2³ factorial design was investigated. The study also investigated the effect of this interaction on the rate of water uptake of the matrix or the rate of release of verapamil hydrochloride from the swelling polymer matrix. Results revealed that the drug-to-polymer ratio had the most influential effect on both the extent of interaction between the drug and the polymer and the rate of water uptake of the polymer matrix. On the other hand, the pH of the medium had the most significant effect on the rate of drug release. Interaction of the tertiary amine nitrogen of the drug with the anionic carboxyl group on the polymer, forming an insoluble complex, reduced the rate of drug release. This interaction also led to neutralization of the carboxyl group and suppression of the electrostatic repulsion between the anionic groups, which reduced the uncoiling and chain relaxation of the polymer and consequently decreased the swelling of the matrix. The application of the designed experiment allowed the quantification of the effect of each of the studied variables on the investigated responses through the calculation of their coefficient in the response surface equation and checking of their significance.     

Optimization of Biodegradable Sponges as Controlled Release Drug Matrices. I. Effect of Moisture Level on Chitosan Sponge Mechanical Properties

Cross‐linked chitosan sponges as controlled release drug carrier systems were developed. Tramadol hydrochloride, a centrally acting analgesic, was used as a model drug. The sponges were prepared by freeze‐drying 1.25% and 2.5% (w/w) high and low M.wt. chitosan solutions, respectively, using glutaraldehyde as a cross‐linking agent. The hardness of the prepared sponges was a function of glutaraldehyde concentration and volume where the optimum concentration that offered accepted sponge consistency was 5%. Below or above 5%, very soft or very hard and brittle sponges were obtained, respectively. The determined drug content in the prepared sponges was uniform and did not deviate markedly from the calculated amount. Scanning electron microscopy (SEM) was used to characterize the internal structures of the sponges. The SEM photos revealed that cross‐linked high M.wt. chitosan sponges have larger size surface pores that form connections (channels) with the interior of the sponge than cross‐linked low M.wt. ones. Moreover, crystals of the incorporated Tramadol hydrochloride were detected on the lamellae and within pores in both chitosan sponges. Differences in pore size and dissolution medium uptake capacity were crucial factors for the more delayed drug release from cross‐linked low M.wt. chitosan sponges over high M.wt. ones at pH 7.4. Kinetic analysis of the release data using linear regression followed the Higuchi diffusion model over 12 hours. Setting storage conditions at room temperature under 80–92% relative humidity resulted in soft, elastic, and compressible sponges.     

High-Throughput Evaluation of Non-Swellable Controlled Release Matrix Tablets

Abstract

Drug release from controlled-release (CR) matrix tablets involves the permeation and diffusion of water through the system. In this study, a new methodology is proposed for the measurement of water permeation and simultaneous drug release from the inert, non-swellable CR matrix tablet of diltiazem (DLT) and a correlation is made between these two processes. Cylindrical matrices were readily prepared by direct compression of pellets obtained by extrusion-spheronization. Water transport was studied using tritiated water (HTO) as a permeant in a Franz-diffusion cell and simultaneously drug release was measured. Further, dissolution was performed on USP XXI/XXII dissolution apparatus I using demineralized water. Matrices showed a steady water-uptake up to 6 h and the steady state for HTO permeation lasting from 6-h to 24-h Flux of water permeated and flux of drug released correlated well. Thus, HTO permeation through the matrix tablet and the proposed methodology can be used as a tool and/or surrogate marker for evaluation of controlled release matrix tablets. This methodology can be coined as “high-throughput” in terms of amount of labor and resources required in comparison to that of dissolution.     

Ophthalmic Delivery of Ciprofloxacin Hydrochloride from Different Polymer Formulations: In Vitro and In Vivo Studies

Abstract

Reservoir-type ocular inserts were fabricated using sodium alginate containing ciprofloxacin hydrochloride as the core (drug reservoir) that was sandwiched between the Eudragit and/or polyvinylacetate films. Ocular inserts were packaged in aluminium foil and sterilized by gamma radiation. These were tested for sterility as per British Pharmacopoeia (BP). Ocular inserts were evaluated for in vitro release rate studies, microbial efficacy, in vivo release studies, efficacy against induced bacterial conjunctivitis in rabbit's eyes, concentration in the aqueous humor, and stability studies as per the International Conference on Harmonization (ICH) guidelines. Ocular inserts passed the test for sterility. They showed zero-order release of the drug in the in vitro and in vivo release studies over a period of 120 hr. The drug was found to be active against selected microorganisms as was proved by microbial efficacy studies. A high correlation coefficient was found between in vitro and in vivo release rate studies. Better improvement was observed in artificially induced bacterial conjunctivitis in rabbit's eyes, compared with marketed eye drops and placebo. Drug concentration in the aqueous humor was found above Minimum Inhibitory Concentration (MIC-90) against selected microorganisms. Shelf-life of the product was found to be more than 2 years.     

D-Optimal Mixture Design: Optimization of Ternary Matrix Blends for Controlled Zero-Order Drug Release From Oral Dosage Forms

ABSTRACT

The objective of the present study was to develop a tablet formulation with a zero-order drug release profile based on a balanced blend of three matrix ingredients. To accomplish this goal, a 17-run, three-factor, two-level D-Optimal mixture design was employed to evaluate the effect of Polyox? (X₁), Carbopol® (X₂), and lactose (X₃) concentrations on the release rate of theophylline from the matrices. Tablets were prepared by direct compression and were subjected to an in vitro dissolution study in phosphate buffer at pH 7.2. Polynomial models were generated for the responses Y₄ (percent released in 8 h) and Y₆ (similarity factor or f₂). Fitted models were used to predict the composition of a formulation that would have a similar dissolution profile to an ideal zero-order release at a rate of 8.33% per hour. When tested, dissolution profile of the optimized formulation was comparable to the reference profile (f₂ was 74.2, and n [release exponent] was 0.9). This study demonstrated that a balanced blend of matrix ingredients could be used to attain a zero-order release profile. Optimization was feasible by the application of response surface methodology, which proved efficient in designing controlled-release dosage forms.     

Use of a Novel Modified TSI for the Evaluation of Controlled-Release Aerosol Formulations. I

When considering the development of potential controlled-release pulmonary drug delivery systems, there is at present no standard method available for the assessment of in vitro drug release profiles necessary to understand how the drug might release following deposition in the lungs. For this purpose, the twin-stage impinger (TSI), apparatus A of the BP, has been redesigned and tested. This modified TSI was found capable of discriminating between drug release rates from conventional and different dry powder formulations consisting of model controlled-release excipients, providing information related to (a) drug diffusion properties of controlled-release dry powder blends with different excipient components and (b) the effect of varying drug concentration within a given formulation.     

Preparation and Evaluation of Eudragit® Acrylic Resin for Controlled Drug Release of Pseudoephedrine Hydrochloride

Abstract

The preparation of a sustained release dosage form for pseudoephedrine hydrochloride was evaluated. Beadlets (PS) containing pseudoephedrine hydrochloride were prepared by spraying a slurry of pseudoephedrine hydrochloride, Eudragit® S-100, dibutyl sebacate and alcohol onto non-pariel seeds via the Wurster column process. The oven-dried PS beadlets were coated with different levels of Eudragit® RS (poorly water permeable) and Eudragit® S-100 (enteric resin). In-vitro dissolution     

Formulation Development and Human In Vitro‐In Vivo Correlation for a Novel,Monolithic Controlled‐Release Matrix System of High Load and Highly Water‐Soluble Drug Niacin

Novel, controlled‐release formulations for high drug load, highly water soluble compound niacin based on polyethylene oxide (PEO) and hydroxypropylmethyl cellulose (HPMC) matrices were developed and investigated. The effect of sodium bicarbonate as a modulator of swelling, erosion, and drug release and its impact on changes in the kinetics of axial swelling and gel strength were evaluated by textural analysis during dissolution study. The drug release rate from PEO‐based matrices was faster and correlated with lower gel strength, greater water uptake, and greater matrix erosion. Slower release rate and greater release duration correlated significantly with greater matrix swelling with negligible matrix erosion for the HPMC‐based matrix system. Inclusion of sodium bicarbonate in the polymeric matrix salted out the macromolecules and increased gel strength and gel viscosity, especially in the vicinity of the swelling fronts. An in vivo study in human subjects after administration of the formulations and a commercial product exhibited similar plasma concentrations. For the formulation of interest, the mean drug fraction absorbed by the body was calculated by the Wagner‐Nelson technique, and a level A “in vitro‐in vivo correlation” was observed between the percent released in vitro and percent absorbed in vivo. The developed formulations appear to be robust and easy to manufacture with maximum flexibility with respect to drug dose, polymeric carriers, duration, and kinetics of drug release.     

复合壳层聚合物胶束的药物控制释放

通过连续原子转移自由基聚合(ATRP)合成了聚丙烯酸叔丁酯-b-聚(甲基丙烯酸二甲胺基乙酯)(PtBA-b-PDMAEMA)和聚丙烯酸叔丁酯-b-聚异丙基丙烯酰胺(PtBA-b-PNIPAM),并采用选择性溶剂自组装方法制备了具有复合壳层的核壳结构胶束(Dh=209 nm),采用动态光散射及透射电镜研究了胶束的结构和分布,进一步通过紫外光谱对胶束的药物释放性能进行了表征。研究表明,这种复合壳层的聚合物胶束会在壳层形成可控的药物通道,从而实现药物释放的精确控制。     

In Situ Ophthalmic Gel of Ciprofloxacin Hydrochloride for Once a Day Sustained Delivery

This article focuses on preparation and evaluation of a once a day ophthalmic delivery system for ciprofloxacin hydrochloride based on the concept of pH-triggered in situ gelation. The in situ gelling system involves the use of polyacrylic acid (Carbopol® 980NF) as a phase transition polymer, hydroxypropyl methylcellulose (Methocel® K100LV) as a release retardant, and ion exchange resin as a complexing agent. Ciprofloxacin hydrochloride was complexed with ion exchange resin to avoid incompatibility between drug and polyacrylic acid. The developed formulation was stable, and nonirritant to rabbit eyes and in vitro drug release was found to be around 98% over a period of 24 hours.     

Relationship Between the Swelling Process and the Release of a Water-Soluble Drug from a Compressed Swellable-Soluble Matrix of Poly(Vinyl Alcohol)

An attempt was made in this study to relate the release of a highly water-soluble model drug from tablet matrices of poly(vinyl alcohol) (PVAL) with the factors that may affect the release behavior. Swelling was evaluated using a simple projection method. The swollen layer was photographed to monitor its thickness. The polymer and drug dissolution were determined simultaneously by spectrophotometric methods. The resulting change of tablet area showed that the process of swelling occurred in three different stages that were intimately related to polymer dissolution: (a) a rapid initial swelling, resulting in an increased area; (b) a period with an approximately constant area; and (c) a decrease of the tablet area. In spite of the significant dissolution of PVAL during the release process, the thickness of the gel layer gradually increased. Thus, the delivery was governed by the drug concentration gradient along the diffusional path length. The drug release appeared to be controlled by a diffusion process according to Higuchi-type kinetics. The data analysis of drug and polymer profiles confirmed the diffusional mechanism.     

Controlled Release of a Poorly Water-Soluble Drug from Hot-Melt Extrudates Containing Acrylic Polymers

ABSTRACT

Controlled release tablets containing a poorly water-soluble drug, indomethacin (IDM), acrylic polymers (Eudragit® RD 100, Eudragit® L 100, or Eudragit® S 100), and triethyl citrate (TEC) were prepared by hot-melt extrusion. The physicochemical and IDM release properties of the controlled release hot-melt extrudates were investigated. Indomethacin (IDM) was found to be both thermally and chemically stable following hot-melt extrusion processing and displayed a plasticizing effect on Eudragit® RL PO as demonstrated by a decrease in the glass transition temperatures of the polymer. The inclusion of either Pluronic® F68, Eudragit® L 100, or Eudragit® S 100 in the powder blend containing Eudragit® RD 100 prior to processing increased the rate of release of the IDM from the extrudates. An increase in the media pH and a decrease in the granule particle size also increased the rate of release of IDM. The inclusion of TEC up to 8% in the granule formulation or compressing the granules into tablets had no significant effect on the drug release rate. Indomethacin (IDM) was transformed from a crystalline Form I into an amorphous form in the Eudragit® RD 100 granules following hot-melt extrusion. The thermal processing facilitated the formation of a solid solution with a continuous matrix structure that was shown to control drug diffusion from the extrudates.     

Evaluation of monolithic osmotic tablet system for nifedipine delivery in vitro and in vivo

The aim of this study was to evaluate the monolithic osmotic tablet system (MOTS) containing a solid dispersion with the practically water-insoluble drug nifedipine in vitro and in vivo. In the drug release study in vitro, the release profiles of this system had almost zero-order kinetics. The influences of tablet formulation variables, sizes of the delivery orifice, membrane variables, and values of pH in the dissolution medium on nifedipine release from MOTS have been investigated. The results provided evidence that the tablet core played an important role in MOTS. While orifice sizes and membrane variables affected the nifedipine release rate, MOTS was independent of the dissolution medium. The appropriate orifice size was found to be in the range of 0.5-1.0 mm. The coating membrane incorporating hydrophilic polyethylene glycol (PEG) formed a porous structure. The human pharmacokinetics and relative bioavailability of MOTS containing nifedipine were compared with a commercial Adalat® osmotic tablet system containing an equivalent dose of nifedipine following an oral single dose of 30 mg given to each of 11 healthy volunteers in an open, randomized crossover study in vivo. The relative bioavailability for MOTS was 112%. There was no statistically significant difference in the pharmacokinetic parameters between two dosage forms. It is concluded that the monolithic osmotic tablet controlled release system is feasible for a long-acting preparation as a once-daily treatment.     

Evaluation of Monolithic Osmotic Tablet System for Nifedipine Delivery In Vitro and In Vivo

Abstract

The aim of this study was to evaluate the monolithic osmotic tablet system (MOTS) containing a solid dispersion with the practically water-insoluble drug nifedipine in vitro and in vivo. In the drug release study in vitro, the release profiles of this system had almost zero-order kinetics. The influences of tablet formulation variables, sizes of the delivery orifice, membrane variables, and values of pH in the dissolution medium on nifedipine release from MOTS have been investigated. The results provided evidence that the tablet core played an important role in MOTS. While orifice sizes and membrane variables affected the nifedipine release rate, MOTS was independent of the dissolution medium. The appropriate orifice size was found to be in the range of 0.5–1.0 mm. The coating membrane incorporating hydrophilic polyethylene glycol (PEG) formed a porous structure. The human pharmacokinetics and relative bioavailability of MOTS containing nifedipine were compared with a commercial Adalat® osmotic tablet system containing an equivalent dose of nifedipine following an oral single dose of 30 mg given to each of 11 healthy volunteers in an open, randomized crossover study in vivo. The relative bioavailability for MOTS was 112%. There was no statistically significant difference in the pharmacokinetic parameters between two dosage forms. It is concluded that the monolithic osmotic tablet controlled release system is feasible for a long-acting preparation as a once-daily treatment.     

Use of a novel modified TSI for the evaluation of controlled-release aerosol formulations. I

When considering the development of potential controlled-release pulmonary drug delivery systems, there is at present no standard method available for the assessment of in vitro drug release profiles necessary to understand how the drug might release following deposition in the lungs. For this purpose, the twin-stage impinger (TSI), apparatus A of the BP, has been redesigned and tested. This modified TSI was found capable of discriminating between drug release rates from conventional and different dry powder formulations consisting of model controlled-release excipients, providing information related to (a) drug diffusion properties of controlled-release dry powder blends with different excipient components and (b) the effect of varying drug concentration within a given formulation.