氟碳铝型材保护膜用压敏胶的制备与性能

以丙烯酸丁酯(BA)和丙烯酸异辛酯(2-EHA)为软单体、甲基丙烯酸甲酯(MMA)为硬单体、丙烯酸(AA)和丙烯酸羟丙酯(HPA)为功能单体,采用降低PSA(压敏胶)的Tg(玻璃化转变温度)和预乳化半连续乳液聚合法合成了丙烯酸酯PSA乳液。研究结果表明:当m(软单体)∶m(硬单体)∶m(功能单体)=90∶5∶5、m(BA)∶m(2-EHA)=1∶2、w(AA)=1.0%、w(HPA)=5%、w(缓冲剂)=0.25%、w(引发剂)=w(复合乳化剂)=0.6%且m(阴离子型乳化剂)∶m(非离子型乳化剂)=1∶1时,PSA乳液的综合性能相对最好,用该PSA制成的保护膜对氟碳铝型材具有良好的附着力,并且其耐湿热老化性能和耐热老化性能俱佳。     

一种高光泽聚丙烯酸酯乳液的制备及性能研究

以St(苯乙烯)为硬单体、BMA(甲基丙烯酸丁酯)为软单体、HEMA(甲基丙烯酸羟乙酯)为功能单体、自制A-35(水溶性丙烯酸酯树脂)为乳化剂、DAAM(双丙酮丙烯酰胺)和ADH(己二酸二酰肼)为交联单体,采用种子乳液聚合法制备了一种新型水性上光涂料用聚丙烯酸酯乳液。研究结果表明:当m(St)∶m(BMA)=50∶42~45∶52、w(A-35)=20%~30%(相对于乳液总固含量而言)、w(HEMA)=2%和w(DAAM)=2.5%(均相对于单体总质量而言)时,该乳液的硬度、附着力和储存稳定性相对最佳,并且涂膜可室温固化,而且其光泽度、耐水性、耐溶剂性及耐磨性均满足水性上光涂料的使用要求。     

PET膜用UV固化涂料的配制及涂层性能研究

以聚氨酯甲基丙烯酸酯(PUA)为主体,进行了PET膜用UV固化涂料配制及涂层性能研究。对PUA低聚物进行了筛选,探讨了低聚物结构对涂层附着力、硬度、柔韧性等性能的影响,以及活性稀释剂、光引发剂的种类、配比、用量等因素对涂层性能的影响。获得了较适宜的PET膜用UV固化涂料配方:低聚物采用5#树脂,其用量为总量的48.0%;活性稀释剂组成为m(TMPTA)∶m(TPGDA)=1∶1,其用量为总量的48.0%;光引发剂组成为m(Darocur1173)∶m(Irgacure 184)=2∶1,其用量为总量的3.2%。经测试,制得的涂膜附着力达100%,硬度3H,柔韧性2 mm,耐酒精擦拭大于150次,可满足PET保护膜硬化处理应用要求。     

丙烯酸酯接枝改性环氧树脂乳液的合成与性能研究

以BA(丙烯酸丁酯)为软单体、St(苯乙烯)为硬单体、EP(环氧树脂)为基体、APS(过硫酸铵)为引发剂和三乙烯四胺为固化剂,采用乳液聚合法合成了丙烯酸酯接枝改性EP乳液。研究结果表明:当反应温度为80℃、m(BA)∶m(St)=1∶1、n(环氧基)∶n(氨基)=1∶1、w(引发剂)=0.8%、w(乳化剂)=4%和w(EP)=25%(均相对于单体总质量而言)时,合成的丙烯酸酯改性EP乳液具有良好的综合性能,其稳定性及涂膜强度均满足应用要求。     

自交联型涂料印花黏合剂的制备与性能研究

以甲基丙烯酸甲酯(MMA)为硬单体、丙烯酸丁酯(BA)为软单体、丙烯酸(AA)为功能单体、N-羟甲基丙烯酰胺(NMA)为交联单体、过硫酸铵(APS)为引发剂、十二烷基硫酸钠(SDS)和壬基酚聚氧乙烯醚(NP-40)为复合乳化剂,采用预乳化半连续乳液聚合法合成了自交联型丙烯酸酯涂料印花黏合剂。研究结果表明:当m(MMA)∶m(BA)=0.38∶1、w(NMA)=3%、w(AA)=2.5%～3.0%、w(复合乳化剂)=3.0%且m(SDS)∶m(NP-40)=1∶(1.5~2.0)、w(APS)=0.8%、75~80℃聚合3 h和85℃保温1 h时,相应乳液的综合性能相对最好。     

环氧树脂改性丙烯酸酯乳液的制备与性能研究

以甲基丙烯酸甲酯(MMA)、丙烯酸(AA)、丙烯酸丁酯(BA)和苯乙烯(St)为共聚单体,自制的环氧树脂(EP)乳液为改性剂,SDBS(十二烷基苯磺酸钠)/OP-10(烷基酚聚氧乙烯醚)为阴/非离子型复合乳化剂,过硫酸铵(APS)为引发剂,采用预乳化法制得EP改性丙烯酸酯乳液。研究结果表明:当m(SDBS)∶m(OP-10)=1.0∶1、m(软单体)∶m(硬单体)=5∶5、w(OP-10/SDBS)=4%、w(APS)=0.6%、w(改性剂)=10%(均相对于混合单体总质量而言)和反应温度为70~80℃时,制得的EP改性丙烯酸酯乳液具有良好的综合性能(如单体转化率大于95%、乳液的Ca~(2+)稳定性良好、胶膜吸水率小于5.0%和附着力为1级)。     

聚丙烯酸酯涂料印花黏合剂的合成

以BA(丙烯酸丁酯)为软单体、MMA(甲基丙烯酸甲酯)为硬单体、AA(丙烯酸)为功能单体、APS(过硫酸铵)为引发剂、SDS(十二烷基硫酸钠)/NP-40(壬基酚聚氧乙烯醚)为阴/非离子型复合乳化剂,采用预乳化半连续乳液聚合法合成了聚丙烯酸酯类涂料印花黏合剂。研究结果表明:当75~80℃聚合3 h、85℃保温1 h、m(MMA)∶m(BA)=25∶72、w(APS)=0.8%、w(复合乳化剂)=3%(均相对于单体总质量而言)且m(SDS)∶m(NP-40)=1∶(1.5~2.0)时,涂料印花黏合剂乳液的综合性能相对最好。     

乳液型纸塑复膜胶的研制

以丙烯酸丁酯(BA)和丙烯酸异辛酯(2-EHA)为软单体、醋酸乙烯(VAc)为硬单体和丙烯酸(AA)为功能单体,采用预乳化种子乳液聚合法成功合成了性能优良的醋丙乳液纸塑复膜胶。着重讨论了单体的选择、软硬单体配比、引发剂、乳化剂以及功能单体的用量等因素对乳液性能的影响。研究结果表明:当m(软单体):m(硬单体)=45:50～50:45、w(引发剂)≈0.6%、w(乳化剂)=3.0%和w(功能单体)=6%时,乳液具有较好的纸塑粘接性能。     

VAc/VoeVa/DAAM三元共聚乳液的制备与性能研究

以VAE[醋酸乙烯酯(VAc)-乙烯共聚物]为种子乳液、聚乙烯醇(PVA)为保护胶体、叔碳酸乙烯酯(VoeVa10)为VAc的共聚单体、OP-10为乳化剂、己二酰肼(ADH)/双丙酮丙烯酰胺(DAAM)为交联体系和叔丁基过氧化氢/甲醛次硫酸钠为氧化还原型引发剂,采用种子乳液聚合法制备了VAc/VoeVa10/DAAM共聚乳液;然后在反应后期加入后交联剂(ADH),得到改性聚醋酸乙烯酯(PVAc)乳液。结果表明:当w(PVA1788+PVA1799)=3%、m(PVA1788)∶m(PVA1799)=1∶1、m(VoeVa10)∶m(VAc)=(10～15)∶100、w(氧化剂)=0.3%、w(VAE)=10%、w(OP-10)=2%、m(ADH)∶m(DAAM)=(0.5～1.5)∶1.0且w(DAAM)=2%时,相应乳液具有优异的耐水性和稳定性,并且其涂膜柔韧性和粘接性能俱佳。     

PET膜用UV固化涂料的研制

以复配低聚物(聚氨酯丙烯酸酯、环氧丙烯酸酯和聚酯丙烯酸酯)、活性稀释剂和复配光引发剂(Irgacure 184、BP)为主要原料,PET(聚对苯二甲酸乙二醇酯)薄膜为基材,制备了高透光率、高耐候性和高性能的UV(紫外光)固化涂料。研究结果表明:当w(环氧丙烯酸酯)=40%、w(聚氨酯丙烯酸酯)=20%、w(活性稀释剂)30%、w[复合光引发剂(Irgacure 184+BP)]=6%、m(Irgacure 184)∶m(BP)=2∶1、w(其他助剂)=4%(相对于涂料质量而言)和UV固化时间为55 s时,固化涂层具有相对最好的综合性能,其邵D硬度为65、附着力为95%,并且PET膜可见光透光率为98%,而且固化涂层具有良好的柔韧性、耐化学药品性和耐黄变性(经150℃处理6 h后颜色无变化)。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。