A chromotropic acid modified SBA-15 as a highly sensitive fluorescent probe for determination of Fe<Superscript>3+</Superscript> and I<Superscript>−</Superscript> ions in water

A novel organic–inorganic hybrid nanomaterial (SBA-15-CA) was prepared by covalent immobilization of chromotropic acid onto the surface of mesoporous silica material SBA-15. Different techniques such as XRD, TEM, FT-IR, N₂ adsorption–desorption and TGA analyses were employed to characterize the grafting process. The data showed that the organic moiety (0.41 mmol g^?1) was successfully grafted to the SBA-15 and the primary hexagonally ordered mesoporous structure of SBA-15 was preserved after the grafting procedure. SBA-15-CA has been realized as a highly sensitive and selective fluorescent probe towards Fe³⁺ and I^? ions in aqueous media. SBA-15-CA exhibited a remarkable fluorescent quenching in the presence of Fe³⁺ ion over other competitive cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ as well as I^? ion among a series of anions including F^?, Cl^?, Br^?, CO₃^2?, HCO₃^?, CN^?, NO₃^?, NO₂^?, SCN^?, SO₄^2?, H₂PO₄^?, HPO₄^2?, and CH₃COO^?. A good linear response was observed between the concentration of the quenchers (Fe³⁺ and I^? ions) and fluorescence intensity of SBA-15-CA with detection limits of 1.5?×?10^?7 M for Fe³⁺ and 0.2?×?10^?7 M for I^?. Moreover, the effects of various pH values on the sensing ability of SBA-15-CA were investigated. Finally, the proposed method was successfully utilized for the determination of Fe³⁺ and I^? ions in river water, well water and tap water samples.     

Synthesis and properties of a new green water‐soluble polymer for proton and metal‐cation sensing

A novel water‐soluble colored polymer, based on 1,8‐naphthalimide, was synthesized through a series of easy reactions with high yields. It emitted green fluorescence both in an aqueous solution and in a solid state. Fluorescence characteristics of the polymer as a function of pH were investigated in aqueous solutions. The polymer solution showed weaker fluorescence in a more acidic medium. When the pH of the solution was higher than 5, stronger fluorescence could be seen with a pK_a value of 3.5. The presence of metal cations (Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) could quench the fluorescence intensity of an aqueous solution of this polymer to different levels. It was highly sensitive to Cu²⁺ and Fe³⁺ present in the studied system. The results suggest that this newly synthesized compound could work as a polymeric sensor responding to water polluted by Cu²⁺, Fe³⁺, and protons. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A Resumable Fluorescent Probe BHN-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@SiO<Subscript>2</Subscript> Hybrid Nanostructure for Fe<Superscript>3+</Superscript> and its Application in Bioimaging

A multifunctional fluorescent probe BHN-Fe₃O₄@SiO₂ nanostructure for Fe³⁺ was designed and developed. It has a good selective response to Fe³⁺ with fluorescence quenching and can be recycled using an external magnetic field. With adding EDTA (2.5?×?10^?5 M) to the consequent product Fe³⁺-BHN-Fe₃O₄@SiO₂, Fe³⁺ can be removed from the complex, and its fluorescence probing ability recovers, which means that this constituted on-off type fluorescence probe could be reversed and reused. At the same time, the probe has been successfully applied for quantitatively detecting Fe³⁺ in a linear mode with a low limit of detection 1.25?×?10^?8 M. Furthermore, the BHN-Fe₃O₄@SiO₂ nanostructure probe is successfully used to detect Fe³⁺ in living HeLa cells, which shows its great potential in bioimaging detection.     

Enhancing performance of optical sensor through the introduction of polystyrene and porous structures

Simple and promising approaches for developing high‐performance Fe³⁺ sensors were proposed. Polyvinyl chloride (PVC) membrane containing pyrene as a fluorescent indicator was prepared via solvent‐cast method. Upon immersion into 1.0 mM Fe³⁺ solution, the fluorescence emission of the membrane decreased with the ratio of fluorescence intensities before and after (F₀/F) immersion of 1.25. The sensitivity enhancement was achieved through the introduction of polystyrene (PS) onto PVC and the introduction of porous structures. Polyvinyl chloride‐graft‐polystyrene copolymers (PVC‐g‐PS) were synthesized via Atom Transfer Radical Polymerization using PVC as macroinitiator. The grafting percentages of PS on PVC calculated from Nuclear Magnetic Resonance Spectroscopy were 17 and 41. The membrane prepared from low molecular weight copolymer showed higher sensing ability than that from PVC with the F₀/F value of 1.39. The increase in PS chain length did not significantly affect the fluorescence quenching. A Stern–Volmer quenching relationship was found with K_sv of 3.96 × 10² M^?1. The effect of porous structures on fluorescence quenching was studied by introducing Triton X‐100 as a porogen to PVC/pyrene solution. Attenuated total reflection Fourier transform infrared spectroscopy and Scanning Electron Microscopy analyses confirmed a complete removal of Triton X‐100 after 3 days of immersion in water. The porous membrane demonstrated an enhanced sensing performance with the F₀/F value of 1.46. PVC‐g‐PS/pyrene membrane exhibited highly sensitive and selective responses toward Fe³⁺ over Cu²⁺, Mg²⁺, Co²⁺, Zn²⁺, Ni²⁺, and Ag⁺. In addition, a good reversibility after five cycles of quenching and regeneration was obtained. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41759.     

Combined experimental and ab initio based determination of the thermal expansion of La0.5Sr0.5Co0.25Fe0.75O3

The thermal expansion of La_0.5Sr_0.5Co_0.25Fe_0.75O₃ (LSCF55) is investigated both by first principles phonon calculations combined with the quasi‐harmonic approximation (QHA) and by experimental approaches. Within the framework of the QHA, the volumetric thermal expansion coefficient of rhombohedral LSCF55 is calculated as α_V,GGA = 50.34 × 10^?6 K^?1. For comparison, the lattice expansion and the volume expansion of LSCF55 grain are measured by in situ high‐temperature X‐ray diffractometer (HT‐XRD). An anisotropic thermal expansion of rhombohedral LSCF55 with α_a,hex = 10.89 × 10^?6 K^?1 and α_c,hex = 21.18 × 10^?6 K^?1 is obtained. The volumetric thermal expansion coefficient is measured as α_V,HT‐XRD = 43.17 × 10^?6 K^?1. In addition, the effectively isotropic expansion coefficients of a polycrystalline LSCF55 bar specimen are measured using a vertical high‐performance thermo‐mechanical analyzer and yield α_{l,bar specimen} = 17.37 × 10^?6 K^?1 and α_{V,bar specimen} = 52.11 × 10^?6 K^?1.     

Synthesis and photophysical behavior of a water-soluble fluorescein-bearing polymer for Fe<Superscript>3+</Superscript> ion sensing

An acrylic monomer bearing xanthene group, acryloylfluorescein (Ac-Flu) was synthesized from fluorescein and acryloyl chloride in the presence of triethylamine in dry dichloromethane (CH₂Cl₂) at room temperature. The synthesized Ac-Flu was identified by IR, MS and ¹HNMR spectra. Copolymer of Ac-Flu and acrylamide (AM) was synthesized with thermal initiator and it was characterized by the method of IR, UV–Vis and DSC. The photophysical behaviors of Ac-Flu and its copolymer were explored by recording the fluorescence spectra in solution, solid state and film in detail. In addition, the ability of the copolymer to detect different metal cations (Mn²⁺, Fe³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺) in aqueous solution was investigated. The results showed that poly(Ac-Flu-co-AM) had a good linear response between the logarithm of concentration of Fe³⁺ (lg[Fe³⁺]) against the relative fluorescence intensity for Fe³⁺ concentration. The results suggest that this copolymer may offer potential as a reusable polymer sensor for Fe³⁺ ion in aqueous solution.     

Effect of amino acids containing sulfur on the corrosion of mild steel in phosphoric acid solutions polluted with Cl−, F− and Fe3+ ions–behaviour near and at the corrosion potential

Research on non‐toxic inhibitors is of considerable interest in investigations into the replacement of hazardous classical molecules. This paper reports the action of four amino acids containing sulfur on the corrosion of mild steel in phosphoric acid solution with and without Cl^?, F^? and Fe³⁺ ions near and at the corrosion potential (E_corr) using both the polarization resistance method and electrochemical impedance spectroscopy (EIS). Both cysteine and N‐acetylcysteine (ACC) showed higher inhibition efficiency than methionine and cystine. Adsorption of methionine onto a mild steel surface obeys the Frumkin adsorption isotherm and has a free energy of adsorption value (ΔG °_ads) lower than those obtained in the presence of cystine, cysteine and ACC whose adsorption isotherms follow that of Langmuir. Both F^? and Fe³⁺ ions stimulate mild steel corrosion while Cl^? ions inhibit it. The binary mixtures of methionine, cysteine or ACC with Cl^? or F^? ions are effective inhibitors (synergism) while the combinations of the amino acid with Fe³⁺ or the ternary Cl^?/F^?/Fe³⁺ mixture have low inhibitive action (antagonism). EIS measurements revealed that the charge transfer process mainly controls the mechanism of mild steel corrosion in phosphoric acid solution in the absence and presence of the investigated additives. The mechanism of corrosion inhibition or acceleration is discussed. © 2002 Society of Chemical Industry     

A study on the sorption of NO3− and F− on the carboxymethylated starch‐based hydrogels loaded with Fe2+ ions

Using the principle of geochemistry of fluoride, green and cost effective anion adsorbents were developed for the removal of F^? from water systems. The scheme was further applied for the removal of NO₃^? also. Carboxymethylated starch functionalized through network formation with acrylamide was used as adsorbent, and the resultant hydrogels were loaded with Fe²⁺ ions to generate anchorage for the anions. Sorption of Fe²⁺ was studied as a function of different factors such as time, temperature, pH, and ion strength. The network having the highest Fe²⁺ uptake was loaded with the Fe²⁺ ions under optimum conditions and used for the sorption of F^? and NO₃^?. High efficiency has been observed for F^?, as even up to 100% uptake has been observed within just 10 minutes. The support shows high selectivity for NO₃^?, which was used as anion reference. Thermodynamics of sorption confirms low order and low energy processes. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Non‐dispersive absorption of CO2 in parallel and cross‐flow membrane modules using EMISE

BACKGROUND: This paper reports an analysis of the mass transfer behaviour of CO₂ absorption in hollow fibre membrane modules in parallel and cross‐flow dispositions. The ionic liquid EMISE, 1‐ethyl‐3‐methylimidazolium ethylsulfate, is used to achieve a zero solvent emission process and the experimental results are compared with CO₂ permeation through the membrane, without solvent in the lumenside. RESULTS: Overall mass transfer coefficients K_{overall, CF} = (0.74 ± 0.02) × 10^?6 m s^?1 and K_{overall, PF} = (0.37 ± 0.018) × 10^?6 m s^?1 were obtained for cross‐flow and parallel flow, respectively. These values are one order of magnitude lower than the coefficient obtained in permeability experiments, K_{overall, PERM} = (6.16 ± 0.1) × 10^?6 m s^?1, indicating the influence of the absorption in the process. Including the specific surface and gas volume of each contactor in the analysis, a similar value of a first‐order kinetic rate constant, K_R = 2.7 × 10^?3 s^?1 is obtained, showing that the interfacial chemical reaction CO₂‐ionic liquid is the slow step in the absorption process. CONCLUSION: An interfacial chemical reaction rate constant K_R = 2.7 × 10^?3 s^?1, describes the behaviour of the CO₂ absorption in the ionic liquid EMISE using membrane contactors in parallel and cross‐flow dispositions. Copyright © 2012 Society of Chemical Industry     

Synthesis and photophysical behavior of a water‐soluble coumarin‐bearing polymer for proton and Ni2+ ion sensing

BACKGROUND: In recent years, many fluorescent chemosensors with various macromolecular structures have been prepared for the detection of protons or metal cations in the environment. Most of this research is focused on polymer sensors with fluorescent recognition sites in the main chain. In this case, the fluorescent recognition sites are covalently bonded to the polymer chain, and thus the polymer shows photophysical properties as a chemosensor for protons and metal ions. RESULTS: An acrylic monomer bearing coumarin moieties, 7‐hydroxy‐4‐methyl‐8‐(4′‐acryloylpiperazin‐1′‐yl)methylcoumarin, was synthesized. This was then copolymerized with N‐vinylpyrrolidone to obtain a blue fluorescent material. The fluorescent copolymer has good solubility in aqueous solution. Its main photophysical properties were determined in relation to its use as a sensor for protons and metal cations. It is an efficient ‘off‐on’ switcher for pH between 3.02 and 12.08. Additionally, the polymer sensor is selective to Ni²⁺ ions, with the increase in the fluorescence intensity depending on Ni²⁺ ion concentrations in the range 0.33 × 10^?5–7.67 × 10^?5 mol L^?1. CONCLUSION: The results suggest that this copolymer may offer potential as a reusable polymer sensor for protons and Ni²⁺ ions in aqueous solution. Copyright © 2009 Society of Chemical Industry     

A new insight into the mechanism of influence of different inorganic salts on optical properties of water‐soluble cationic conjugated polymers

The water‐soluble conjugated polyelectrolyte poly{2,5‐bis[3‐(N,N,N‐triethylammoniumbromide)‐1‐oxapropyl]‐1,4‐phenylenevinylene} (P2) was synthesized and the influences of different inorganic salts on the optical properties of the polyelectrolyte were studied. New absorption and emission peaks at longer wavelength can be observed in the case of P2 with addition of different concentrations of Cl^? or NO₃^?, whereas addition of I^? or ClO₄^? only induces a red shift. Interestingly, addition of SO₄^2? or F^? does not result in considerable changes in optical spectra. Through UV‐visible spectrometry, photoluminescence, ¹H NMR and cyclic voltammetry, we showed that the nature of the inorganic salts brings these different changes. The special structure of the bond of NO₃^? and the large electronegativity of chlorine lead to an electron transfer between the conjugated polymer and the negative ions. The large radius of I^? and the weak electron withdrawing ability of ClO₄^? only bring a red shift of optical spectra. In addition, SO₄^2? and F^? do not affect the spectra significantly, except that the fluorescence intensity falls slightly indicating that P2 is not sensitive to these ions. Copyright © 2011 Society of Chemical Industry     

Photo-fenton and UV photo degradation of naphthalene with zero- and two-valent iron in the presence of persulfate

An initial set of 12 kinetic experiments was carried out to remove naphthalene from an aqueous effluent by photo-Fenton involving Fe⁰ and Fe²⁺ at two different concentrations of H₂O₂ (150 and 300?mg?L^?1) and three different pHs (3, 5, and 7) (2²×3¹ experiments). The rate constants (k) for the reaction of naphthalene degradation by involving Fe²⁺ as reactant were in general higher than those with Fe⁰, but the use of Fe²⁺ increased the concentration of naphthalene at equilibrium (C_e) when compared with the same response obtained with Fe⁰ at analogous conditions. A second set of twelve kinetic experiments of photo-Fenton degradation was also performed with persulfate as additive at the conditions already reported, but at a constant concentration of H₂O₂ of 150?mg?L^?1 (2¹×3¹ experiments with NaCl +2¹×3¹ experiments without NaCl). In almost all the runs in which only the source of iron was varied, k from the kinetic data involving Fe²⁺ was higher than that involving Fe⁰, but no difference was observed in terms of C_e that was always zero. The addition of persulfate to treat the effluent either containing or not containing salt enhanced the chemical kinetics, and shifted the equilibrium toward the full removal of naphthalene. A final set of nine experiments of UV photo degradation of naphthalene by involving persulfate without iron, with Fe⁰ and Fe²⁺ in the pH range from 3 to 7 (3² experiments) mainly showed that the use of H₂O₂ may be avoided to remove rapidly and completely naphthalene from wastewater.     

Microbiocidal activity of chitosan‐N‐2‐hydroxypropyl trimethyl ammonium chloride

Chitosan‐N‐2‐hydroxypropyl trimethyl ammonium chloride (QTS) was prepared by reaction of chitosan with glycidyl trimethylammonium chloride, which was characterized by FTIR. QTS with different molecular weights (M_w 41.55 × 10⁴, 9.02 × 10⁴, 3.57 × 10⁴, and 0.17 × 10⁴) showed biocidal activity on Staphylococcua aureus, Bacillus subtilis, Staphylococcua epidermidis, and Candida albicans. QTS with high molecular weight had high biocidal activity on the gram‐positive bacteria, and the biocidal effect of QTS decreased with decreasing molecular weight from 9.02 × 10⁴ to 0.17 × 10⁴. QTS with M_w 41.55 × 10⁴ exhibits slightly lower biocidal activity on Candida albicans than other QTS samples. However, no remarkable biocidal activity of QTS was found on gram‐negative bacteria Escherichia coli and Pseudomonas aeruginosa at the concentration up to 10 g L^?1. Existence of cationic surfactant, amphoteric surfactant, nonionic surfactant, Ca²⁺ and Mg²⁺ had no remarkable effect on microbiocidal activity of these QTS samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3851–3856, 2007     

Enhanced pyroelectric properties in (Bi0.5Na0.5)TiO3–BiAlO3–NaNbO3 ternary system lead‐free ceramics

High pyroelectric performance and good thermal stability of pyroelectric materials are desirable for the application of infrared thermal detectors. In this work, enhanced pyroelectric properties were achieved in a new ternary (1?x)(0.98(Bi_0.5Na_0.5)(Ti_0.995Mn_0.005)O₃–0.02BiAlO₃)–xNaNbO₃ (BNT–BA–xNN) lead‐free ceramics. The effect of NN addition on the microstructure, phase transition, ferroelectric, and pyroelectric properties of BNT–BA–xNN ceramics were investigated. It was found that the average grain size decreased as x increased to 0.03, whereas increased with further NN addition. The pyroelectric coefficient p at room temperature (RT) was significantly increased from 3.87 × 10^?8Ccm^?2K^?1 at x = 0 to 8.45 × 10^?8Ccm^?2K^?1 at x = 0.03. The figures of merit (FOMs), F_i, F_v and F_d, were also enhanced with addition of NN. Because of high p (7.48 × 10^?8Ccm^?2K^?1) as well as relatively low dielectric permittivity (~370) and low dielectric loss (~0.011), the optimal FOMs at RT were obtained at x = 0.02 with F_i = 2.66 × 10^?10 m/V, F_v = 8.07 × 10^?2 m²/C, and F_d = 4.22 × 10^?5 Pa^?1/2, which are superior to other reported lead‐free ceramics. Furthermore, the compositions with x ≤ 0.03 exhibited excellent temperature stability in a wide temperature range from 20 to 80°C because of high depolarization temperature (≥110°C). Those results unveil the potential of BNT–BA–xNN ceramics for infrared detector applications.     

Inactivation of rice bran lipase with metal ions

The inactivation of rice bran lipase was studied in vitro and in vivo using metal ions in methanol or HCl. Lipase was extracted from rice bran in 0.1 M potassium phosphate buffer, pH 7.0 and purified by ammonium sulphate fractionation. The 25–55% ammonium sulphate fraction was subjected to DEAE-cellulose ion exchange chromatography and the fraction (F6) eluted at V_e/V_o of 14.37 was purified about 333-fold. In-vitro studies on F6 lipase showed that Fe³⁺ and Ni²⁺ completely inhibited the lipase activity at 5 × 10^?5 M concentration, while Zn²⁺ and Cu²⁺ did so at 2.5 × 10^?4 M. The results on in-vivo inactivation of rice bran lipase showed that Fe³⁺ and Ni²⁺ at 200 μg g^?1 significantly checked the release of free fatty acids (FFA) from rice bran for 6 days of storage when compared with using concentrated HCl (2%, v/w) only. The triglyceride content of oil was also maximum with Fe³⁺ and Ni²⁺ treatment at 200 μg g^?1. The present results suggest that Fe³⁺ and Ni²⁺ could be effectively used to arrest the release of FFA in rice bran and thus contribute to improving the edible quality of rice bran oil.     

Potentiality of Bi and Mn co-doped lead-free NaNbO3 ceramics as a pyroelectric material for uncooled infrared thermal detectors

The pyroelectric materials have immense applications in the uncooled infrared thermal detectors. However, owing to increasing environmental concerns due to Pb element, it is required to explore novel, high-performance, environmental-friendly pyroelectric materials. This is the first study to report about the pyroelectric properties of lead-free NaNbO₃ ceramics, which displayed a high pyroelectric coefficient of 1.85 × 10^?8 C cm^-2 K^?1 and figures of merit as F_i = 0.67 × 10^?10 m V^?1, F_v = 3.33 × 10^?2 m² C^?1, and F_d = 5.32 × 10^-5 Pa^?1/2 at room temperature. Also, highly temperature-stable pyroelectric characteristics were also observed in NaNbO₃ ceramics due to the high depolarization temperature of 280 ℃. The high pyroelectric properties and temperature stability were a result of the electric field induced irreversible phase transition from antiferroelectric to ferroelectric. Hence, we can conclude that lead-free NaNbO₃ ceramics are a novel and promising candidate for pyroelectric detectors in a wide temperature range, especially for large area detectors and pyroelectric point detector.     

Preparation and Characterization of PAn-HPC/Fe3O4 and PAn-HPC/Fe2O3 Nanocomposite Using Hydroxypropylcellulose as a Steric Stabilizer

Nanocomposite of polyaniline containing Fe₃O₄ and Fe₂O₃ was synthesized by a chemical method using hydroxypropylcellulose as a steric stabilizer. The characteristics of product such as, morphology, conductivity, and particle size were studied. The results indicate that, these properties were dependent on the surfactant, amount and type of metallic oxide. When the concentration of Fe₂O₃ and Fe₃O₄ increased from 1 to 5 g/L, in PAn/Fe₂O₃ and PAn/Fe₃O₄ composites the conductivity decreased from 1.2 × 10^?6 to 1.1 × 10^?8 and 2.8 × 10^?6 to 1.1 × 10^?8S/cm, respectively, while the particle size of nanocomposite increased from 96 to 110, and 97 to 115 nm, respectively.     

Kinetics of leaching of tunisian phosphate ore particles in dilute phosphoric acid solutions

Van der Sluis et al.'s model was used to determine the rate of the partial dissolution of a Tunisian phosphate rock with dilute phosphoric acid (1.5 mass% P₂O₅). When the temperature rises from 25 to 90°C, for a given particle size, the mass-transfer coefficients, k_L°, vary from 3 × 10^?3 to 8 × 10^?3 m ·s^?1. The corresponding diffusion coefficients, D, lies between 6 × 10^?7 and 27 × 10^?7 m²·s^?1. Activation energy is equal to 14 kJ·mol^?1 and values of k_L°, at 25°C, are in the range of 0.28 × 10^?3 and 4 × 10^?3 m·s^?1 when the agitation speed goes from 220 to 1030 rpm, showing that the leaching process is controlled by diffusion rather than by chemical reaction.     

Synthesis and characterization of polyaniline/NiO nanocomposite

Spherical nickel oxide (NiO) nanoparticles were prepared by using nickel chloride as precursor in the ethylene glycol as solvent and urea as precipitant. The X‐ray diffraction study showed that NiO has single‐phase cubic structure with average crystallite size of 35 nm. The prepared NiO nanoparticles were incorporated into polyaniline (PANI) matrix during in situ chemical oxidative polymerization of aniline with different molar ratios of aniline: NiO (12 : 1, 6 : 1, and 3 : 1) at 5°C using (NH₄)₂S₂O₈ as oxidant in aqueous solution of sodium dodecylbenzene sulfonic acid, as surfactant and dopant under N₂ atmosphere. The synthesized composites have been characterized by means of X‐ray diffraction (XRD), thermogravimetric analysis, Fourier transform infrared (FTIR), scanning electron microscopy, TEM, and vibrating sample magnetometer for its structural, thermal, morphological, and magnetic investigation. The XRD and FTIR studies show that the NiO particles are in the composite. The room temperature conductivities of the synthesized PANI, PANI/NiO (12 : 1), (6 : 1), and (3 : 1) composites were found to be 3.26 × 10^?4, 1.88 × 10^?4, 1.5 × 10^?4, and 4.61 × 10^?4 S/cm, respectively. The coercivity (H_c) and remnant magnetization (M_r) of NiO, PANI/NiO NCs (12 : 1), (6 : 1), and (3 : 1) at 5 K was found to be 8.22 × 10^?2, 6.31 × 10^?2, 6.42 × 10^?2, 6.27 × 10^?2 T, and 6.64 × 10^?3, 1.83 × 10^?4, 3.07 × 10^?4, and 3.98 × 10^?4 emu/g, respectively. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Design and synthesis of novel fluorescence sensing perylene diimides based on photoinduced electron transfer

Two novel tetraester- and PAMAM-branched perylene diimides were synthesized and configured as “fluorophore-spacer-receptor” systems based on photoinduced electron transfer. Due to their long alkylester and alkylamine terminal groups the examined compounds were well soluble in organic solvents. Photophysical characteristics of the dyes were investigated in DMF and water/DMF (1:1, v/v) solution. The ability of the synthesized perylene diimides to detect cations was evaluated by the changes in their fluorescence intensity in the presence of metal ions (Zn²⁺, Co²⁺, Cu²⁺, Fe³⁺, Pb²⁺, Hg²⁺, Ag⁺ and Ni²⁺) and protons. The dyes under study displayed “off-on” switching in its fluorescence as a function of pH, which is attributed to disallowing photoinduced electron transfer from the receptor moiety to the fluorophore. PAMAM-branched dye displayed a good pH sensor activity (FE = 6.4), however the pH sensing ability of tetraester was substantially higher (FE = 184). In the presence of Cu²⁺ and Pb²⁺ ions tetraester quenched its fluorescence intensity (FQ = 22 and 12 respectively), while PAMAM-branched dye enhanced its fluorescence intensity with pronounced selectivity to Cu²⁺ and Fe³⁺ (FE = 3.2 and 4.9, respectively). The results obtained indicate the potential of the novel compounds as fluorescent detectors for metal ions with pronounced selectivity towards Cu²⁺, Pb²⁺ and Fe³⁺ ions and highly efficient “off-on” pH switches, especially a tetraester-branched perylene diimide.