Preparation and evaluation of a novel gastric mucoadhesive sustained-release acyclovir microsphere

Objective: The objective of this study was to prepare a novel gastric mucoadhesive sustained-release acyclovir (AV)-resinate microsphere. Methods: First, AV absorption ratio was quantified in a rat gastrointestinal (GI) tract model. AV-resinate was prepared by bath method and used as cores to prepare microspheres by an emulsion solvent diffusion technique with carbopol 934 as coating material. GI transit test of the prepared microspheres was carried out in rats and beagle dogs, followed by the in vivo bioavailability evaluation of the microspheres in beagle dogs. Results: The AV absorption ratio in different segments of rat's GI track for 3 hours was as following: stomach 9.46 ± 0.62%, duodenum 20.22 ± 1.50%, jejunum 15.7 ± 1.33%, ileum 9.15 ± 1.01%, and colon 4.59 ± 0.48%. These results showed that AV was mainly absorbed in the stomach and upper intestine. The average diameter of the microspheres was 115.3 μm. The microspheres had a drug content of 33.3 ± 0.7% (w/w) and a sustained-release profile for 12 hours in vitro. The mucoadhesive test in rats and beagle dogs showed that most of the microspheres were retained in the stomach 6 hours after oral administration. The in vivo pharmacokinetics test revealed that the microsphere and reference (AV tablets) preparations have no significant difference for C_max. The t_max has increased from 2.33 hours (reference) to 5 hours (test). Meanwhile, the relative bioavailability of AV microspheres was 145%. Conclusion: A novel AV-resinate microsphere was prepared. The microspheres were proved to be gastric mucoadhesive and sustained-release with higher bioavailability.     

Formulation and in vitro evaluation of a thermoreversible mucoadhesive nasal gel of itopride hydrochloride

Itopride hydrochloride (ITO HCl) is a prokinetic agent, used in the treatment of gastrointestinal motility disorders. The aim of the study was to develop stable mucoadhesive thermoreversible nasal gel to avoid first pass effect. ITO HCl was incorporated into the blends of thermoreversible polymers like poloxamer 407 and various mucoadhesive polymers in different concentrations to increase the contact of the formulations with nasal mucosa. The compatibility between the drug and the suggested polymers was studied by Fourier transform infrared and differential scanning calorimetry (DSC). The formulations were evaluated for clarity, pH, gelation temperature, mucoadhesive strength, gel strength, viscosity, and drug content. In addition, the in vitro drug release and the dissolution efficiency (DE)% were measured. The optimized formulations that showed the highest dissolution efficiency% (DE%) in saline phosphate buffer of pH 6.4 at 35?±?0.5?°C were chosen for stability testing at temperatures of 4?±?2 and 25?±?2?°C/60?±?5% RH. It was found that F1 and F17 that contain 18% w/v poloxamer 407 and 0.5% w/v of hydroxypropylmethyl cellulose K4M or methyl cellulose (MC), respectively, showed higher stability results as indicated by their higher t₉₀ values (days).     

Design,characterization and ex vivo evaluation of chitosan film integrating of insulin nanoparticles composed of thiolated chitosan derivative for buccal delivery of insulin

The purpose of this study is to optimize and characterize of chitosan buccal film for delivery of insulin nanoparticles that were prepared from thiolated dimethyl ethyl chitosan (DMEC-Cys). Insulin nanoparticles composed of chitosan and dimethyl ethyl chitosan (DMEC) were also prepared as control groups. The release of insulin from nanoparticles was studied in vitro in phosphate buffer solution (PBS) pH 7.4. Optimization of chitosan buccal films has been carried out by central composite design (CCD) response surface methodology. Independent variables were different amounts of chitosan and glycerol as mucoadhesive polymer and plasticizer, respectively. Tensile strength and bioadhesion force were considered as dependent variables. Ex vivo study was performed on excised rabbit buccal mucosa. Optimized insulin nanoparticles were obtained with acceptable physicochemical properties. In vitro release profile of insulin nanoparticles revealed that the highest solubility of nanoparticles in aqueous media is related to DMEC-Cys nanoparticles. CCD showed that optimized buccal film containing 4% chitosan and 10% glycerol has 5.81?kg/mm² tensile strength and 2.47?N bioadhesion forces. Results of ex vivo study demonstrated that permeation of insulin nanoparticles through rabbit buccal mucosa is 17.1, 67.89 and 97.18% for chitosan, DMEC and DMEC-Cys nanoparticles, respectively. Thus, this study suggests that DMEC-Cys can act as a potential enhancer for buccal delivery of insulin.     

Development and evaluation of hollow mesoporous silica microspheres bearing on enhanced oral delivery of curcumin

The aim of this work is to develop curcumin-loaded hollow mesoporous silica microspheres (HMSMs@curcumin) to improve the poor oral bioavailability of curcumin. Hollow mesoporous silica microspheres (HMSMs) were synthesized in facile route using a hard template. HMSMs and HMSMs@curcumin were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption/desorption measurements, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and X-ray diffraction (XRD). In addition, to demonstrate the potential application of the HMSMs@curcumin, cytotoxicity, in vitro release behavior and in vivo pharmacokinetics of curcumin loaded in these HMSMs were investigated by using of Caco-2 cells and Sprague-Dawley (SD) rats, respectively. These mono-dispersed HMSMs exhibited high drug loading ratio and encapsulation efficiency due to the mesoporous shell and hollow core. The excellent characteristics of HMSMs such as mono-dispersed morphology, smooth surface, uniform, ordered and size-narrowing mesopores resulted in a good in vitro release profile of curcumin from HMSMs@curcumin. Moreover, an impressive improvement in the oral absorption of curcumin and prolonged systemic circulation time were achieved in the in vivo animal studies. In addition, the good biocompatibility of developed HMSMs with Caco-2 cells was confirmed based on the in vitro cytotoxicity assay. In conclusion, this system demonstrated a great potential for efficient delivery of curcumin in vitro and in vivo, suggesting a good prospect for its application in clinic for therapeutic drug delivery in future.     

Preparation and characterization of fast dissolving pullulan films containing BCS class II drug nanoparticles for bioavailability enhancement

The aim of this study is to assess pullulan as a novel steric stabilizer during the wet-stirred media milling (WSMM) of griseofulvin, a model poorly water-soluble drug, and as a film-former in the preparation of strip films via casting–drying the wet-milled drug suspensions for dissolution and bioavailability enhancement. To this end, pullulan films, with xanthan gum (XG) as thickening agent and glycerin as plasticizer, were loaded with griseofulvin nanoparticles prepared by WSMM using pullulan in combination with sodium dodecyl sulfate (SDS) as an ionic stabilizer. The effects of drug loading and milling time on the particle size and suspension stability were investigated, as well as XG concentration and casting thickness on film properties and dissolution rate. The nanosuspensions prepared with pullulan–SDS combination were relatively stable over 7 days; hence, this combination was used for the film preparation. All pullulan-based strip films exhibited excellent content uniformity (most?<3% RSD) despite containing only 0.3–1.3?mg drug, which was ensured by the use of precursor suspensions with?>5000 cP viscosity. USP IV dissolution tests revealed fast/immediate drug release (t₈₀?相似文献   

Preparation and evaluation of Baicalin-loaded cationic solid lipid nanoparticles conjugated with OX26 for improved delivery across the BBB

Purpose: A novel brain targeting drug delivery system based on OX26 antibody conjugation on PEGylated cationic solid lipid nanoparticles (OX26-PEG-CSLN) was prepared.

Methods: The Baicalin-loaded PEGylated cationic solid lipid nanoparticles modified by OX26 antibody (OX26-PEG-CSLN) were prepared by emulsion evaporation–solidification at low temperature method. The immune-gold labeled OX26-PEG-CSLN was visualized by transmission electron microscopy. The mean diameter and zeta potential of OX26-PEG-CSLN, PEG-CSLN and CSLN were determined using a Zetasizer. The entrapment efficiency of OX26-PEG-CSLN, PEG-CSLN and CSLN was determined by ultrafiltration centrifugation method. And the solid-state characterization of OX26-PEG-CSLN and CSLN were analyzed by X-ray. Pharmacokinetics studies were conducted by in vivo microdialysis in rat cerebrospinal fluid.

Results: The results showed that the OX26-PEG-CSLN, PEG-CSLN and CSLN had average diameters of 47.68?±?1.65, 27.20?±?1.70 and 33.89?±?5.74?nm, Zeta potentials of ?0.533?±?0.115?mV, 11.200?±?0.500?mV and 11.080?±?1.170?mV and entrapment efficiencies of 83.03?±?0.01%, 92.90?±?3.50% and 97.83?±?0.19%, respectively. In the pharmacokinetics studies, the AUC value of OX26-PEG-CSLN was11.08-fold higher than that of the Baicalin solution (SOL) (p?p?>?0.05); the C_max value of OX26-PEG-CSLN was 7.88-fold higher than that of SOL (p?p?Conclusion: These results demonstrated OX26-PEG-CSLN could be a promising carrier to deliver drugs across the BBB for the treatment of brain diseases.