Safety studies on high-pressure hydrogen vehicle refuelling stations: Releases into a simulated high-pressure dispensing area

If the general public is to use hydrogen as a vehicle fuel, customers must be able to handle hydrogen with the same degree of confidence, and with comparable risk, as conventional liquid and gaseous fuels. The hazards associated with jet releases from leaks in a vehicle-refuelling environment must be considered if hydrogen is stored and used as a high-pressure gas since a jet release in a confined or congested area can create an explosion hazard. As there was insufficient knowledge of the explosion hazards, a study was initiated to gain a better understanding of the potential explosion hazard consequences associated with high-pressure leaks from hydrogen vehicle refuelling systems. This paper describes the experiments with a dummy vehicle and dispenser units to represent refuelling station congestion. Experiments with ignition of premixed 5.4 m × 6.0 m × 2.5 m hydrogen–air clouds and hydrogen jet releases up to 40 MPa (400 bar) pressure are described. The results are discussed in terms of the conditions leading to the greatest overpressures and overall conclusions are made from these.     

Effects of congestion and confining walls on turbulent deflagrations in a hydrogen storage facility-part 1: Experimental study

If the general public is to use hydrogen as a vehicle fuel, customers must be able to handle hydrogen with the same degree of confidence, and with comparable risk, as conventional liquid and gaseous fuels. Since hydrogen is stored and used as a high-pressure gas, a jet release in a confined or congested area can create an explosion hazard. Therefore, hazards associated with jet releases from leaks in a vehicle-refuelling environment must be considered. As there was insufficient knowledge of the explosion hazards, a study was initiated to gain a better understanding of the potential explosion hazard consequences associated with high-pressure leaks from hydrogen vehicle refuelling systems. Our first paper [1] describes the release and subsequent ignition of a high-pressure hydrogen jet in a simulated dispensing area of a hydrogen vehicle refuelling station. In the present paper, an array of dummy storage cylinders with confining walls (to represent isolation from the forecourt area) was used to represent high-pressure hydrogen cylinder storage congestion. Experiments with ignition of premixed 5.4 m × 6.0 m × 2.5 m hydrogen-air clouds and hydrogen jet releases up to 40 MPa pressures were performed. The results are presented and discussed in relation to the conditions giving the highest overpressures. We concluded from the study that the ignition of a jet release gives much higher local overpressure than in the case of ignition of a homogeneous mixture inside the cylinder storage congestion area. The modelling of these results will be presented in Part 2 of this paper.     

The simulation and analysis of leakage and explosion at a renewable hydrogen refuelling station

The number of hydrogen refuelling stations (HRSs) is steadily growing worldwide. In China, the first renewable hydrogen refuelling station has been built in Dalian for nearly 3 years. FLACS software based on computational fluid dynamics approach is used in this paper for simulation and analysis on the leakage and explosion of hydrogen storage system in this renewable hydrogen refuelling station. The effects of wind speed, leakage direction and wind direction on the consequences of the accident are analyzed. The harmful area, lethal area, the farthest harmful distance and the longest lethal distance in explosion accident of different accident scenarios are calculated. Harmful areas after explosion of different equipments in hydrogen storage system are compared. The results show that leakage accident of the 90 MPa hydrogen storage tank cause the greatest harm in hydrogen explosion. The farthest harmful distance caused by explosion is 35.7 m and the farthest lethal distance is 18.8 m in case of the same direction of wind and leakage. Moreover, it is recommended that the hydrogen tube trailer should not be parked in the hydrogen refuelling station when the amount of hydrogen is sufficient.     

A study of hydrogen leak and explosion in different regions of a hydrogen refueling station

The consequences of hydrogen leaks and explosions are predicted for the sake of the safety in hydrogen refueling stations. In this paper, the effect of wind speed on hydrogen leak and diffusion is analyzed in different regions of a hydrogen refueling station, and the influence of delayed ignition time on hydrogen explosion after an accidental hydrogen leak is further studied by numerical simulation. Results show that the effect of wind speed on the probability of hydrogen fires is distinctive in different regions of hydrogen refueling station. The size of combustible clouds in the trailer front region and the outer region increases in the low wind speed case, and the front of combustible clouds is formed in a spherical shape in the outer region, which can greatly increase the probability of hydrogen explosion. However, the high wind speed may cause an increase of the risk of accidents in the near ground region. Moreover, a non-linear correlation is shown between the rate of combustible cloud dissipation and wind speed after the hydrogen stops leaking. In addition, it is found that an increase in delayed ignition time may lead to an increase in explosion intensity, which is related with the larger high temperature area and stronger explosion overpressure. Two flame fronts and the reverse propagation of the explosion overpressure can be observed, when the delayed ignition time is larger.     

Analysis of transient supersonic hydrogen release,dispersion and combustion

A hydrogen leak from a facility, which uses highly compressed hydrogen gas (714 bar, 800 K) during operation was studied. The investigated scenario involves supersonic hydrogen release from a 10 cm² leak of the pressurized reservoir, turbulent hydrogen dispersion in the facility room, followed by an accidental ignition and burn-out of the resulting H₂-air cloud. The objective is to investigate the maximum possible flame velocity and overpressure in the facility room in case of a worst-case ignition. The pressure loads are needed for the structural analysis of the building wall response. The first two phases, namely unsteady supersonic release and subsequent turbulent hydrogen dispersion are simulated with GASFLOW-MPI. This is a well validated parallel, all-speed CFD code which solves the compressible Navier-Stokes equations and can model a broad range of flow Mach numbers. Details of the shock structures are resolved for the under-expanded supersonic jet and the sonic-subsonic transition in the release. The turbulent dispersion phase is simulated by LES. The evolution of the highly transient burnable H₂-air mixture in the room in terms of burnable mass, volume, and average H₂-concentration is evaluated with special sub-routines. For five different points in time the maximum turbulent flame speed and resulting overpressures are computed, using four published turbulent burning velocity correlations. The largest turbulent flame speed and overpressure is predicted for an early ignition event resulting in 35–71 m/s, and 0.13–0.27 bar, respectively.     

Safety investigation of hydrogen charging platform package with CFD simulation

Hydrogen has been expected as one of the most promising green energy sources, especially in transportation section. Despite its great potential as a new source of energy, it is reluctant to build hydrogen charging stations for the fear of accidents such as hydrogen leakage, fire, and following explosion. To reduce those problems and promote the acceptance of hydrogen charging station, this study focuses on the hydrogen charging platform package (HCPP) which is a new type of the mobile hydrogen station. Hydrogen leakage cases are investigated using CFD (computational fluid dynamics) simulation. The simulation is performed with the whole configuration of the HCPP including main components, storage, compressor, and dispenser. Based on the risk assessment, hydrogen leak scenarios with high possibilities of accidents are simulated. The simulation results show the leak length of hydrogen gas, its dispersion, and the various ranges of volume ratios of leaked hydrogen gas. Based on the simulation results, it is clearly confirmed that the leaked hydrogen gas with high concentration stays inside the HCPP. Therefore, the effects of ventilation to reduce the possibility of the explosion are continuously considered to investigate the safety of the HCPP in the case of the leakage accident.     

Effects of congestion and confining walls on turbulent deflagrations in a hydrogen storage facility-part 2: Numerical study

Safety studies for hydrogen retail stations involve identification of possible accidental scenarios, modelling of consequences and measures to mitigate associated hazards with it. Accidental release of hydrogen during its handling and storage can lead to formation of ignitable mixture in a very short time. Ignition of such a mixture can lead to generation of overpressure affecting structure and people. Understanding of the possible overpressures generated is critical in designing the system safe from explosion hazards. In the present study, the worst-case scenario where high-pressure hydrogen storage cylinders are enveloped by a premixed hydrogen-air cloud is numerically simulated. The computational domain mimics the setup for premixed hydrogen cloud in a mock hydrogen cylinder storage congestion environment experimentally studied by Shirvill et al. [1]. Large Eddy Simulations (LES) are performed using OpenFOAM CFD toolbox solver. The Flame Surface Wrinkling Model in LES context is used for modelling deflagrations [2]. Numerical simulation results are compared against experiments. Simulations are able to predict experimental flame arrival and overpressure reasonably well. The effects of ignition location, congestion and confining walls on the turbulent deflagrations in particular on explosion overpressure are discussed. It was concluded that explosion overpressure increases with increase in confinement.     

Improved safety by crossanalyzing quantitative risk assessment of hydrogen refueling stations

With the goal of building 310 hydrogen refueling stations (HRSs) in Korea by 2022, restrictions, such as location restrictions and separation distances, are being eased, so developing ways to improve technology and safety. As HRSs contain major facilities such as compressors, storage tanks, dispenser, and priority control panels, and a leakage could result in a large fire or explosion caused by an ignition source. To perform quantitative risk assessment, programs, namely, Hy-KoRAM and Phast/Safeti were used in this study. It could determine the damage range and effect on radiant heat and flame length, as well as personal and societal risks, using these programs. The crossanalysis of the two programs also improves the facility's safety and the reliability of the results.     

Numerical modelling of release of subsonic and sonic hydrogen jets

For the general public to use hydrogen as a vehicle fuel, they must be able to handle hydrogen with the same degree of confidence as conventional liquid and gaseous fuels. For refuelling hydrogen cars, hydrogen is stored at high pressures up to 700 bar. The hazards associated with jet releases from accidental leaks of such highly pressurized storage must be considered since a jet release and dispersion can result in a fire or explosion. Therefore, it is essential to understand the dispersion characteristics of hydrogen to determine the extent of the flammable cloud when released from a high-pressure source. These parameters are very important in the establishment of the safety distances and sizes of hazardous zones. This paper describes the work done by us in modelling of dispersion of accidental releases of hydrogen, using the FRED (Fire Explosion Release Dispersion) software. The dispersion module in FRED is validated against experimental data available in the open literature for steady release and dispersion of cold and ambient hydrogen gas. The validation is performed for a wide range of hole sizes (0.5–4 mm), pressure (1.7–400 bar) and temperature (50–298 K).The model predictions of hydrogen gas jet velocity, concentration decay as a function of distance as well as radial concentration distribution are in good agreement with experiments. Overall, it is concluded that FRED can accurately model accidental release and dispersion of hydrogen in unconfined and open configurations.     

Investigating the explosion hazard of hydrogen produced by activated aluminum in a modified Hartmann tube

Metallic powders exposed to water are sources of hydrogen gas that may result in an explosion hazard in the process industries. In this paper, hydrogen production and flame propagation in a modified Hartmann tube were investigated using activated aluminum powder as fuel. A self-sustained reaction of activated aluminum with water was observed at cool water and room temperatures for all treatments. One gram of Al mixed with 5 wt% NaOH or CaO resulted in a rapid rate of hydrogen production and an almost 100% yield of hydrogen generation within 30 min. The flame structures and propagation velocity (FPV) of released hydrogen at different ignition delay times were determined using electric spark ignition. Flame structures of hydrogen were mainly dependent on hydrogen concentration and ignition delay time, likely due to different mechanisms of hydrogen generation and flame propagation. As expected, FPVs of hydrogen in the Hartmann tube increased with ignition delay time. However, the FPV of upward flame propagation was much larger than that of downward flame propagation due to the effect of spreading acceleration at the explosion vent. Once ignited, the FPV of upward flame propagation reached 31.3–162.5 m/s, a value far larger than the 7.5–30 m/s for downward flame propagation. Hydrogen explosion caused by the accumulation of wet metal dust can be far more dangerous than an ordinary hydrogen explosion.     

Vented confined explosions involving methane/hydrogen mixtures

The EC funded Naturalhy project is assessing the potential for using the existing gas infrastructure for conveying hydrogen as a mixture with natural gas (methane). The hydrogen could then be removed at a point of use or the natural gas/hydrogen mixture could be burned in gas-fired appliances thereby providing reduced carbon emissions compared to natural gas. As part of the project, the impact on the safety of the gas system resulting from the addition of hydrogen is being assessed. A release of a natural gas/hydrogen mixture within a vented enclosure (such as an industrial housing of plant and equipment) could result in a flammable mixture being formed and ignited. Due to the different properties of hydrogen, the resulting explosion may be more severe for natural gas/hydrogen mixtures compared to natural gas. Therefore, a series of large scale explosion experiments involving methane/hydrogen mixtures has been conducted in a 69.3 m³ enclosure in order to assess the effect of different hydrogen concentrations on the resulting explosion overpressures. The results showed that adding up to 20% by volume of hydrogen to the methane resulted in a small increase in explosion flame speeds and overpressures. However, a significant increase was observed when 50% hydrogen was added. For the vented confined explosions studied, it was also observed that the addition of obstacles within the enclosure, representing congestion caused by equipment and pipework, etc., increased flame speeds and overpressures above the levels measured in an empty enclosure. Predictions of the explosion overpressure and flame speed were also made using a modified version of the Shell Global Solutions model, SCOPE. The modifications included changes to the burning velocity and other physical properties of methane/hydrogen mixtures. Comparisons with the experimental data showed generally good agreement.     

Experimental study of hydrogen explosion in repeated pipe congestion – Part 1: Effects of increase in congestion

Experimental studies were conducted with the objective of gaining a better understanding of the potential explosion hazard consequences that could be associated with a high-pressure leak from a hydrogen vehicle refuelling system. The first part of the study, described in this paper, was a series of experiments designed to establish hydrogen–air explosion overpressures in a well-defined and well understood 3 m × 3 m x 2 m (high) repeated pipe congestion. The results of the experiments are discussed in terms of the conditions leading to the greatest overpressures. It is concluded from the study that stoichiometric ratio in the range of 1.2–1.3 gives highest overpressure. Moreover, it was observed that increasing the congestion from 4-gate to 9-gate congestion leads to significant increase in the overpressure. In addition, it was concluded that, explosion in a hydrogen-air mixture is significantly more severe than the explosion in an ethane-air, methane-air or propane-air mixtures. This is attributed to higher laminar flame speed of hydrogen-air mixtures.     

Mixing and warming of cryogenic hydrogen releases

Laboratory measurements were made on the concentration and temperature fields of cryogenic hydrogen jets. Images of spontaneous Raman scattering from a pulsed planar laser sheet were used to measure the concentration and temperature fields from varied releases. Jets with up to 5 bar pressure, with near-liquid temperatures at the release point, were characterized in this work. This data is relevant for characterizing unintended leaks from piping connected to cryogenic hydrogen storage tanks, such as might be encountered at a hydrogen fuel cell vehicle fueling station. The average centerline mass fraction was observed to decay at a rate similar to room temperature hydrogen jets, while the half-width of the Gaussian profiles of mass fraction were observed to spread more slowly than for room temperature hydrogen. This suggests that the mixing and models for cryogenic hydrogen may be different than for room temperature hydrogen. Results from this work were also compared to a one-dimensional (streamwise) model. Good agreement was seen in terms of temperature and mass fraction. In subsequent work, a validated version of this model will be exercised to quantitatively assess the risk at hydrogen fueling stations with cryogenic hydrogen on-site.     

Optimal design of wind-powered hydrogen refuelling station for some selected cities of South Africa

The transport sector is considered as one of the sectors producing high carbon emissions worldwide due to the use of fossil fuels. Hydrogen is a non-toxic energy carrier that could serve as a good alternative to fossil fuels. The use of hydrogen vehicles could help reduce carbon emissions thereby cutting down on greenhouse gases and environmental pollution. This could largely be achieved when hydrogen is produced from renewable energy sources and is easily accessible through a widespread network of hydrogen refuelling stations. In this study, the techno-economic assessment was performed for a wind-powered hydrogen refuelling station in seven cities of South Africa. The aim is to determine the optimum configuration of a hydrogen refuelling station powered by wind energy resources for each of the cities as well as to determine their economic viability and carbon emission reduction capability. The stations were designed to cater for 25 hydrogen vehicles every day, each with a 5 kg tank capacity. The results show that a wind-powered hydrogen refuelling station is viable in South Africa with the cost of hydrogen production ranging from 6.34 $/kg to 8.97 $/kg. These costs are competitive when compared to other costs of hydrogen production around the world. The cities located in the coastal region of South Africa are more promising for siting wind powered-hydrogen refuelling station compared to the cities located on the mainland. The hydrogen refuelling stations could reduce the CO₂ and CO emissions by 73.95 tons and 0.133 tons per annum, respectively.     

全球加氢站产业、技术及标准进展综述

以美国、欧洲、日本、中国的加氢站作为考察对象,就产业投资运营、主要设备商、相关标准进行梳理,结果表明：在加氢站投资及运营管理方面,美国、欧洲、日本具有较为成熟的经验;在氢增压、储存、加注等技术方面,德国、日本保持领先地位。在诸多氢气和液氢的技术领域,美国保持领先地位;在一些细分技术领域,英国、法国、挪威、俄罗斯具有优势;在加氢站标准方面,美国、日本具有较为完善的标准体系。中国已解决70 MPa氢气增压、加注、储存等领域的部分技术难题,但与其他国家相比,离子液式氢压缩机、液氢泵、液氢储罐、液氢加氢枪等产品的研发仍需持续推进。     

Numerical study of hydrogen explosions in a refuelling environment and in a model storage room

Numerical simulations have been carried out for large scale hydrogen explosions in a refuelling environment and in a model storage room. For the first scenario, a high pressure hydrogen jet released in a congested refuelling environment was ignited and the subsequent explosion analysed. The computational domain mimics the experimental set up for a vertical downwards release in a vehicle refuelling environment experimentally tested by Shirvill et al. [6]. For completeness of the analysis, an analytical model has also been developed to provide the transient pressure conditions at nozzle exit. The numerical study is based on the traditional computational fluid dynamics (CFD) techniques solving Reynolds averaged Navier-Stokes equations. The Pseudo diameter approach is used to bypass the shock-laden flow structure in the immediate vicinity of the nozzle. For combustion, the Turbulent Flame Closure (TFC) model is used while the shear stress transport (SST) model is used for turbulence. In the second scenario, premixed hydrogen-air clouds with different hydrogen concentrations from 15% to 60% in volume were ignited in a model storage room. Analysis was carried out to derive the dependence of overpressure on hydrogen concentrations for safety considerations.     

A study of barrier walls for mitigation of unintended releases of hydrogen

Hydrogen jet flames resulting from ignition of unintended releases can be extensive in length and pose significant radiation and impingement hazards. Depending on the leak diameter and source pressure, the resulting consequence distances can be unacceptably large. One possible mitigation strategy to reduce exposure to jet flames is to incorporate barriers around hydrogen storage and delivery equipment. An experimental and modeling program has been performed at Sandia National Laboratories to better characterize the effectiveness of barrier walls to reduce hazards. This paper describes the experimental and modeling program and presents results obtained for various barrier configurations. The experimental measurements include flame deflection using standard and infrared video and high-speed movies (500 fps) to study initial flame propagation from the ignition source. Measurements of the ignition overpressure, wall deflection, radiative heat flux, and wall and gas temperature were also made at strategic locations. The modeling effort includes three-dimensional calculations of jet flame deflection by the barriers, computations of the thermal radiation field around barriers, predicted overpressure from ignition, and the computation of the concentration field from deflected unignited hydrogen releases. The various barrier designs are evaluated in terms of their mitigation effectiveness for the associated hazards present. The results show that barrier walls are effective at deflecting jet flames in a desired direction and can help attenuate the effects of ignition overpressure and flame radiative heat flux.     

Design of a solar hydrogen refuelling station following the development of the first Croatian fuel cell powered bicycle to boost hydrogen urban mobility

Hydrogen refuelling stations are important for achieving sustainable hydrogen economy in low carbon transport and fuel cell electric vehicles. The solution presented in this paper provides us with a technology for producing carbon dioxide free hydrogen, which is an approach that goes beyond the existing large-scale hydrogen production technologies that use fossil fuel reforming. Hence, the main goal of this work was to design a hydrogen refuelling station to secure the autonomy of a hydrogen powered bicycle. The bicycle hydrogen system is equipped with a proton exchange membrane fuel cell stack of 300 W, a DC/DC converter, and a metal hydride storage tank of 350 NL of hydrogen. The hydrogen power system was made of readily available commercial components. The hydrogen station was designed as an off-grid system in which the installed proton exchange membrane electrolyzer is supplied with electric energy by direct conversion using photovoltaic cells. With the hydrogen flow rate of 2000 cc min⁻¹ the hydrogen station is expected to supply at least 5 bicycles to be used in 20 km long city tourist routes.     

Experimental study on the propagation characteristics of hydrogen/methane/air premixed flames in a narrow channel

This work is focused on the explosion characteristics of premixed gas containing different volume fractions of hydrogen in a narrow channel (1000 mm × 50 mm × 10 mm) under the circumstance of stoichiometric ratio. The ignition positions were set in the closed end and the middle of the pipeline respectively. The results showed that when the gas was ignited at the pipeline closed end, the propagating flame was tulip structure for different premixed gas. When the hydrogen volume fraction was less than 40%, the flame propagation speed increased significantly with the rise of hydrogen volume fraction, and the overpressure peak also appeared obviously in advance. However, when the volume fraction of hydrogen was more than 40%, the increase of flame propagation speed and the overpressure peak occurrence time varied slightly. Furthermore, when the ignition position was placed in the middle of the pipeline, the flame propagation speed propagating to the opening end was much faster than that propagating to the closing end, and there was no tulip shape when the flame propagates to the opening end. The flame propagating to the closed end appeared tulip shape under the influence of airflow, and high-frequency flame oscillation occurred during the propagation. This work shows that the hydrogen volume fraction and ignition position significantly affected the flame structure, flame front speed, and explosion overpressure.     

Evaluation of barrier walls for mitigation of unintended releases of hydrogen

Hydrogen jet flames resulting from ignition of unintended releases can be extensive in length and pose significant radiation and impingement hazards. Depending on the leak diameter and source pressure, the resulting consequence distances can be unacceptably large. One possible mitigation strategy to reduce exposure to jet flames is to incorporate barriers around hydrogen storage and delivery equipment. While reducing the extent of unacceptable consequences, the walls may introduce other hazards if not properly configured. An experimental and modeling program has been performed at Sandia National Laboratories to better characterize the effectiveness of barrier walls to reduce hazards. This paper describes the experimental and modeling program and presents results obtained for various barrier configurations. The experimental measurements include flame deflection using standard and infrared video and high-speed movies (500 fps) to study initial flame propagation from the ignition source. Measurements of the ignition overpressure, wall deflection, radiative heat flux, and wall and gas temperature were also made at strategic locations. The modeling effort includes three-dimensional calculations of jet flame deflection by the barriers, computations of the thermal radiation field around barriers, predicted overpressure from ignition, and the computation of the concentration field from deflected unignited hydrogen releases. The various barrier designs are evaluated in terms of their mitigation effectiveness for the associated hazards present. The results show that barrier walls are effective at deflecting jet flames in a desired direction and can help attenuate the effects of ignition overpressure and flame radiative heat flux.