共查询到17条相似文献,搜索用时 125 毫秒
1.
粘合树脂A250在子午线轮胎带束层胶中的应用 总被引:1,自引:0,他引:1
试验研究以粘合树脂A250替代间苯二酚在子午线轮胎带束层胶中的应用效果.结果表明,在子午线轮胎带束层胶配方中,采用2.5份粘合树脂A250替代1.5份间苯二酚,并采用快速促进剂NS,减小癸酸钴用量,胶料的加工安全性提高,硫化速度降低不明显;硫化胶各项物理性能变化不大,热空气老化后的撕裂强度明显提高,老化后胶料与钢丝帘线的粘合性能保持较高水平. 相似文献
2.
3.
4.
5.
6.
研究间苯二酚、间甲树脂、酚醛树脂3种粘合促进剂在全钢子午线轮胎胎体中的应用。结果表明:间苯二酚硫化胶的邵尔A型硬度和定伸应力较大,酚醛树脂和间甲树脂硫化胶的撕裂强度和拉断伸长率较大;酚醛树脂硫化胶与钢丝帘线的初始抽出力较高,老化后,间苯二酚和间甲树脂硫化胶与钢丝帘线的抽出力和抽出力保持率较高;酚醛树脂硫化胶压缩生热和60℃时的损耗因子明显高于间苯二酚和间甲树脂硫化胶。在实际生产中,应根据原料特性与应用性能调整配方与优化工艺,以获得最佳的综合性能。 相似文献
7.
研究了三种酚醛树脂替代间苯二酚后全钢子午线轮胎胎体胶的硫化性能、力学性能、动态力学性能以及老化前后与钢丝的粘合性能。结果表明,使用酚醛树脂替代间苯二酚后,胶料的门尼黏度增加,焦烧时间延长;除树脂TYC-0219使硫化时间明显延长外,其余相差不大;硫化胶的拉伸强度、定伸应力稍有降低,其他力学性能变化不大;贮能模量、损耗因子都有所下降;胶料与镀铜钢丝间的抽出力明显增大,相对于使用间苯二酚,树脂A250、TYC-0219和B-20-S使抽出力分别增加32%、24%和22%。热空气老化后,三种替代树脂的增粘效果仍然明显高于间苯二酚;经盐水介质老化后,树脂A250的增粘效果下降较大。 相似文献
8.
9.
研究国产间苯二酚-甲醛树脂HT1005在全钢载重子午线轮胎钢丝粘合胶中的应用,并与普通间苯二酚和进口同类产品B-20-S进行对比。结果表明:以HT1005树脂替代间苯二酚用于钢丝粘合胶中,胶料的门尼焦烧时间和t90延长,硫化胶的物理性能和粘合性能提高,可有效解决胶料在加工过程中的冒烟问题,减少环境污染;加入HT1005树脂的胶料综合性能与加入B-20-S树脂的胶料基本相当。 相似文献
10.
11.
12.
Investigation of the effects of adhesion promoters on the adhesion properties of rubber/steel cord by a new testing technique 下载免费PDF全文
The effects of adhesion promoters, cobalt decanoate and PN759 (modified resorcinol) on the static and dynamic adhesion properties of rubber/steel cord in a carcass recipe are examined. A new testing method with special rubber/steel cord specimens was developed. It was found that cobalt decanoate could improve the static adhesion and favored the dynamic adhesion of rubber/steel cord so that adhesive failure mainly occurred in rubber phase. A resorcinol‐formaldehyde‐silica promoting system was deleterious to adhesion stability, but improved initial adhesion strength. PN759 improved the dynamic mechanical properties compared with resorcinol for the carcass vulcanizates at strains less than 10%. PN759 instead of resorcinol slightly improved the static and dynamic adhesion and the probability that adhesion failure occurred in the interphase was similar to that occurring in the rubber phase. The dynamic “pull‐out forces” for samples with 1.0 phr cobalt decanoate first increased and then decreased with the increase in the number of fatigue cycles and reached a maximum at 100,000 fatigue cycles. The covered rubber on the “pulled‐out” cord after fatigue appeared to form a screw thread form and the greater pull‐out force corresponded to more uniform and narrower screw threads. SEM images indicated that un‐dispersed filler agglomerates could be the initiating factor for adhesive failure. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39460. 相似文献
13.
14.
研究了大比表面积活性氧化锌在轮胎肩垫胶中的应用效果。试验结果表明 ,用 5份大比表面积活性氧化锌替代 8份普通氧化锌 ,胶料的门尼粘度略有下降 ,焦烧时间和t10 稍有延长 ,t90 缩短 ;硫化胶的邵尔A型硬度、拉伸强度、30 0 %定伸应力和撕裂强度均有所提高 ,而扯断伸长率和固特里奇生热有所降低 ;采用试验配方生产的轮胎成品性能明显提高 ,且配方成本下降 相似文献
15.
16.
以反式聚异戊二烯(TPI)为基质,研究了纳米碳化硅用量对碳化硅/TPI形状记忆复合材料硫化特性、物理机械性能、热性能及形状记忆性能的影响。结果表明,随着碳化硅用量的增加,复合材料的焦烧时间和正硫化时间都逐渐缩短;拉伸强度呈现先增大后减小的趋势,硬度逐渐增大;结晶度逐渐降低,从纯TPI的16.5%下降至碳化硅用量20份(质量,下同)时的13.9%;碳化硅用量为10份时复合材料的单向形状记忆性能最好,而其双向形状记忆行为在应力为250 kPa时的形状回复率达到了最大值79.1%。 相似文献