An efficient visible light photocatalyst prepared from TiO<Subscript>2</Subscript> and polyvinyl chloride

An efficient visible light photocatalyst has been prepared from TiO₂ nanoparticles and a partly conjugated polymer derived from polyvinyl chloride (PVC). It was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The visible light photocatalytic activity of the as-prepared photocatalyst was evaluated by the photocatalytic degradation of Rhodamine B (RhB) under visible light irradiation. The XPS, FT-IR, and Raman spectra show that the partly conjugated polymer derived from PVC exists on the surface of the TiO₂ nanoparticles. The UV–Vis DRS, XRD, and TEM results reveal that the modification of the partly conjugated polymer can obviously improve the absorbance of the TiO₂ nanoparticles in the range of visible light and hardly affect their size and crystallinity. The visible light photocatalytic activity of the as-prepared TiO₂ nanocomposites is higher than that of commercial TiO₂ (Degussa P25) and comparable with those of visible light photocatalysts reported in the literature. Their visible light photocatalytic stability is also good. The reasons for their excellent visible light photocatalytic activity and the major factors affecting their photocatalytic activity are discussed.     

Growth of Cu2O nanoparticle on reduced graphene sheets with high photocatalytic activity for degradation of Rhodamine B

Cu₂O–reduced graphene oxide (RGO) nanocomposite was synthesized by a simple one-pot solvothermal method. The morphology and properties of Cu₂O/RGO nanocomposites were characterized by scanning electron microscope, Raman spectroscopy, X-ray diffraction, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy. The photocatalytic activities of the as-prepared nanocomposites were investigated by photodegrading Rhodamine B under visible light. Results show that Cu₂O/RGO nanocomposites exhibited a remarkably enhanced photocatalytic efficiency compared with pure Cu₂O nanoparticles and commercial P25. Moreover, we found that the content of graphene oxide introduced into composite material was a crucial factor for its improved photocatalytic performance.     

High efficient ultraviolet photocatalytic activity of BiFeO<Subscript>3</Subscript> nanoparticles synthesized by a chemical coprecipitation process

Single-crystalline BiFeO₃ nanoparticles have been synthesized through a simple chemical coprecipitation process using bismuth and iron nitrates. By employing both X-ray diffraction and electron diffraction, the nanoparticles were unambiguously identified to have a rhombohedrally distorted perovskite structure. X-ray photoelectron spectroscopy investigation shows that Fe element exists as the Fe³⁺ valence state in the BiFeO₃ nanoparticles. UV–Vis absorption spectrum indicates that the absorption cut-off wavelength of the nanoparticles is about 580 nm, corresponding to the energy bandgap of 2.10 eV. The BiFeO₃ nanoparticles exhibited an efficient ultraviolet photocatalytic activity, more than 92% of methyl orange was decolorized after 260 min UV irradiation. Unexpectedly, the BiFeO₃ nanoparticles do not show any efficient visible light photocatalytic activity, although the nanoparticles absorb visible light in the wavelength range of 400–580 nm.     

Visible-light activities of Gd<Subscript>2</Subscript>O<Subscript>3</Subscript>/BiVO<Subscript>4</Subscript> composite photocatalysts

Gd₂O₃/BiVO₄ composite photocatalysts were hydrothermal synthesized and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, and UV–vis diffusion reflectance spectra; all the composite photocatalysts exhibited enhanced photocatalytic activities than the pure BiVO₄ for degradation of methyl orange under visible-light irradiation. The improved activity of composites was discussed and ascribed to the electron-scavenging effect of dopants.     

Photocatalytic activity of polypyrrole/TiO<Subscript>2</Subscript> nanocomposites under visible and UV light

A series of polypyrrole (PPy)/titanium dioxide (TiO₂) nanocomposites were prepared in different polymerization conditions by ‘in situ’ chemical oxidative polymerization. The nanocomposites were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy spectra (XPS), and UV–Vis diffuse reflectance spectra. The photocatalytic degradation of methyl orange (MO) was chosen as a model reaction to evaluate the photocatalytic activities of TiO₂/PPy catalysts. The results show that a strong interaction exists at the interface between TiO₂ and PPy, the deposition of PPy on TiO₂ nanoparticles can alleviate their agglomeration, PPy/TiO₂ nanocomposites show stronger absorbance than neat TiO₂ under the whole range of visible light. The obtained PPy/TiO₂ nanocomposites exhibit significantly higher photocatalytic activity than the neat TiO₂ on the degradation of MO aqueous solution under visible and UV light illumination. The reasons for improving the photocatalytic activity were also discussed.     

Thermal and electrical conductivity of Al(OH)<Subscript>3</Subscript> covered graphene oxide nanosheet/epoxy composites

Al(OH)₃ functionalized graphene composites (Al–GO) were prepared using a simple sol–gel method. In this protocol, graphene oxide (GO) was prepared according to the Hummers method and functionalized to enhance its reactivity with aluminum isopropoxide by a LiAlH₄ treatment. The functionalized graphene sheets were characterized by X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. These analyses confirmed that GO had been fabricated and the Al(OH)₃ layer could have a homogeneous distribution with large and dense coverage onto GO sheets. In addition, the thermal and electrical conductivity of the epoxy composites with GO and Al–GO fillers were measured. The thermal conductivities of the composites with graphene-based fillers were enhanced by the addition of fillers. In particular, the thermal conductivity of GO/epoxy composite containing 3 wt% was approximately two times higher than that of pure epoxy resin. In addition, the electrical conductivity of Al–GO embedded composites degenerated compared to GO composites.     

A study of S-doped TiO<Subscript>2</Subscript> for photoelectrochemical hydrogen generation from water

Sulfur-doped titanium dioxide (TiO₂) was investigated as a potential catalyst for photoelectrochemical hydrogen generation. Three preparation techniques were used: first ballmilling sulfur powder with Degussa P25 powder (P25), second, ball milling thiourea with P25, and third a sol–gel technique involving titanium (IV) butoxide and thiourea. The resulting powders were heat-treated and thin-film electrodes were prepared. In all three cases, the heat-treated powders contained small amounts of S (1–3%). However, Rietveld analysis on X-ray diffraction (XRD) measurements revealed no significant changes in lattice parameters. For the samples prepared using thiourea, X-ray photoelectron spectroscopy (XPS) measurements indicated the presence of N and C in the heat-treated powders in addition to S. In all cases, visible-ultraviolet spectroscopy performed on bulk powders confirmed the extension of absorption into the visible region. However, the same spectroscopic technique performed on thin-film electrodes (∼0.5 μm) suggests that the absorption coefficients were very small in the visible region (≤10⁴ m⁻¹). The first and third methods yielded powders with substantially smaller photocatalytic activity relative to P25 powder in the UV region. The electrodes prepared from powders obtained using the second method yielded photocurrents comparable to those prepared from P25 powder.     

Synthesis and photocatalytic performance of TiO<Subscript>2</Subscript> nanospheres–graphene nanocomposite under visible and UV light irradiation

In this article, we present a fast and simple method to produce TiO₂ nanospheres–graphene nanocomposite with high photocatalytic activity under visible and UV light irradiation. TiO₂ nanospheres were adsorbed on graphene in sol–gel process. First, titanium (IV) butoxide underwent hydrolysis in graphene oxide (GO) ethanol solution resulting in TiO₂ nanospheres deposition on GO. Next, the material was calcinated to generate the phase transition of TiO₂ into anatase and reduce GO to graphene. The detailed characterization of the material was performed via transmission electron microscopy, energy dispersive X-rays spectrometer, Fourier-transformed infrared spectroscopy, X-ray diffraction, and Raman spectroscopy. Interestingly, the band-gap energy of the prepared photocatalyst was drastically decreased in comparison with the commercial photocatalyst P25 from 3.05 to 2.36 eV. This influenced in the activation of the material under visible light and resulted in high photocatalytic activity in the process of phenol decomposition in visible and UV irradiation.     

Titania-reduced graphene oxide nanocomposite as a promising visible light-active photocatalyst for continuous degradation of VVOC in air purification process

Titania-reduced graphene oxide nanocomposites have been prepared through facile hydrothermal method by a reaction between P25 as TiO₂ source and graphene oxide. Reduction of graphene oxide and its reaction with P25 nanoparticles were achieved simultaneously at high temperature and pressure during the hydrothermal process with the minimum organic solvents. Chemical bonds, crystalline structure, morphology, porosity and light absorption of composites along with their photocatalytic activity under UV and visible light irradiation were investigated. Transmission electron microscopy images showed that P25 nanoparticles, with diameters about 25 nm, were dispersed on the sheets of reduced graphene oxide (RGO) homogeneously. A stronger interaction between P25 and RGO provided a red shift about 20 nm in the absorption edge of the composites. To set up a continuous tubular reactor made from thin layer of the prepared material, composite films were coated on the external surface of a steel tube to make an annular reactor. The reactor was equipped with UV or visible light sources to investigate the photocatalytic activity of the prepared composites in a continuous air flow contaminated with specified amount of acetaldehyde as a VVOC (very volatile organic compound) model molecule. Degradation efficiency of P25–RGO with 0.5 wt% RGO was significantly high under visible light irradiation, and about 70% conversion was observed using an air flow at normal conditions with specific flow rate of 17 ml min^?1 and 500 ppm acetaldehyde, by 30 mg of the coated composite in the reactor. Composites with low amount of RGO would be an appropriate photosensitizer and electron acceptor to suppress the recombination of photogenerated electron–hole pairs to enhance the photocatalytic performance.     

Construction of hierarchical TiO<Subscript>2</Subscript> nanorod array/graphene/ZnO nanocomposites for high-performance photocatalysis

The photocatalytic performance of heterostructure photocatalysts is limited in practical use due to the charge accumulation at the interface and its low efficiency in utilizing solar energy during photocatalytic process. In this work, a ternary hierarchical TiO₂ nanorod arrays/graphene/ZnO nanocomposite is prepared by using graphene sheets as bridge between TiO₂ nanorod arrays (NRAs) and ZnO nanoparticles (NPs) via a facile combination of spin-coating and chemical vapor deposition techniques. The experimental study reveals that the graphene sheets provide a barrier-free access to transport photo-excited electrons from rutile TiO₂ NRAs and ZnO NPs. In addition, there generates an interface scattering effect of visible light as the graphene sheets provide appreciable nucleation sites for ZnO NPs. This synergistic effect in the ternary nanocomposite gives rise to a largely enhanced photocurrent density and visible light-driven photocatalytic activity, which is 2.6 times higher than that of regular TiO₂ NRAs/ZnO NPs heterostructure. It is expected that this hierarchical nanocomposite will be a promising candidate for applications in environmental remediation and energy fields.     

Functionalization of electrospun magnetically separable TiO<Subscript>2</Subscript>-coated SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript> nanofibers: strongly effective photocatalyst and magnetic separation

Magnetically separable TiO₂-coated SrFe₁₂O₁₉ electrospun nanofibers were obtained successfully by means of sol–gel, electrospinning, and coating technology, followed by heat treatment at 550–650 °C for 3 h. The average diameter of the electrospun fibers was 500–600 nm. The fibers were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), and vibrating sample magnetometer (VSM). The optimized calcining temperature was determined by XRD and the analysis of decolorizing efficiency of methylene blue (MB) under UV–vis irradiation. The photocatalytic activity of the TiO₂-coated SrFe₁₂O₁₉ fibers was investigated using ultraviolet–visible absorbance by following the photooxidative decomposition of a model pollutant dye solution, MB in a photochemical reactor. In contrast to pure TiO₂ fibers, the TiO₂-coated SrFe₁₂O₁₉ fibers have higher absorption in 250–750 nm wavelength regions. The presence of SrFe₁₂O₁₉ not only broadened the response region of visible-light, but also enhanced the absorbance for UV light. The decolorizing efficiency of MB under UV–vis irradiation was up to 98.19%, which was a little higher than that of Degussa P25 (97.68%). Furthermore, these fibers could be recollected easily with a magnet in a photocatalytic process and had effectively avoided secondary pollution of treated water.     

Effects of samarium dopant on photocatalytic activity of TiO<Subscript>2</Subscript> nanocrystallite for methylene blue degradation

Sm³⁺-doped TiO₂ nanocrystalline was synthesized by a sol–gel auto-combustion method and characterized by X-ray diffraction, Brunauer-Emmett-Teller method (BET), UV–vis diffuse reflectance spectroscopy (DRS), and also photoluminescence (PL) emission spectroscopy. The photocatalytic activity of Sm³⁺–TiO₂ catalyst was evaluated by measuring degradation rates of methylene blue (MB) under either UV or visible light. The results showed that doping with the samarium ions significantly enhanced the photocatalytic activity for MB degradation under UV or visible light irradiation. This was ascribed to the fact that a small amount of samarium dopant simultaneously increased MB adsorption capacity and separation efficiency of electron-hole pairs. The results of DRS showed that Sm³⁺-doped TiO₂ had significant absorption between 400 nm and 500 nm, which increased with the increase of samarium ion content. The adsorption experimental demonstrated that Sm³⁺–TiO₂ had a higher MB adsorption capacity than undoped TiO₂ and adsorption capacity of MB increased with the increase of samarium ion content. It is found that the stronger the PL intensity, the higher the photocatalytic activity. This could be explained by the points that PL spectra mainly resulted from surface oxygen vacancies and defects during the process of PL, while surface oxygen vacancies and defects could be favorable in capturing the photoinduced electrons during the process of photocatalytic reactions, so that the recombination of photoinduced electrons and holes could be effectively inhibited.     

Synthesis and characterization of pure anatase TiO<Subscript>2</Subscript> nanoparticles

Pure anatase TiO₂ nanoparticles were synthesized by microwave assisted sol–gel method and further characterized by powder X-ray diffraction (XRD), energy dispersive x-ray analysis (EDAX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–Visible spectrophotometer, SEM images showed that TiO₂ nanoparticles were porous structure. The XRD patterns indicated that TiO₂ after annealed at 300 °C for 3 h was mainly pure anatase phase. The crystallite size was in the range of 20–25 nm, which is consistent with the results obtained from TEM images. Microwave heating offers several potential advantages over conventional heating for inducing or enhancing chemical reactions.     

Synthesis of nano-MoS<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> composite and its catalytic degradation effect on methyl orange

A nano-MoS₂/TiO₂ composite was synthesized in H₂ atmosphere by calcining a MoS₃/TiO₂ precursor, which was obtained via a quick deposition of MoS₃ on anatase nano-TiO₂ under a strong acidic condition. The obtained nano-MoS₂/TiO₂ composite was characterized by X-ray diffraction spectroscopy, Brunauer–Emmett–Teller (BET) surface area, scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive spectrometry, ultraviolet–visible spectroscopy, and Fourier transform infrared spectroscopy. The results show that the composite had a high BET surface area because of its small size and irregularly layered structure. MoS₂ in the composite was composed of typical layered structures with thicknesses of 2–8 nm and lengths of 10–40 nm. The composite contained a wide and intensive absorption at 400–700 nm, which is in the visible light region, and presented a positive catalytic effect on removing methyl orange from the aqueous solution. The catalytic activity of the composite was influenced by the initial concentration of methyl orange, the amount of the catalyst, the pH value, and the degradation temperature. In addition, the composite catalyst could be regenerated and repeatedly used via filtration three times. The deactivating catalyst could be reactivated after catalytic reaction by heating at 450 °C for 30 min in H₂.     

An investigation on synthesis and photocatalytic activity of polyaniline sensitized nanocrystalline TiO<Subscript>2</Subscript> composites

Polyaniline (PAn) sensitized nanocrystalline TiO₂ composite photocatalyst (PAn/TiO₂) with high activity and easy separation was facilely prepared by in situ chemical oxidation of aniline from the surfaces of the TiO₂ nanoparticles. The morphology, structure, and light absorption properties of composite photocatalyst were examined in term of its application to photocatalysis. The photocatalytic activity of PAn/TiO₂ nanocomposites for the degradation of methylene blue (MB) aqueous solution was investigated and compared with pure TiO₂. The spectra analyses illustrated that, when PAn deposited on the surface of TiO₂, the crystalline behavior of PAn was hampered and the degree of crystallinity decreased, and the characteristic peaks of the PAn were shifted indicating that there was a strong interaction between PAn and TiO₂ nanoparticles. PAn was able to sensitize TiO₂ efficiently and the composite photocatalyst could be activated by absorbing both the ultraviolet and visible light (λ = 190–800 nm), whereas pure TiO₂ absorbed ultraviolet light only (λ < 400 nm). Photocatalytic experiments showed that under natural light irradiation, MB could be degraded more efficiently on the PAn/TiO₂ than on the pure TiO₂, due to the charge transfer from PAn to TiO₂ and efficient separation of e⁻-h⁺ pairs on the interface of PAn and TiO₂ in the excited state. More significantly, the PAn/TiO₂ composite photocatalyst exhibited easy separation and less deactivation after several runs. The advantages of the obtained PAn/TiO₂ composite photocatalyst revealed its great practical potential in wastewater treatment.     

Photocatalytic degradation of pendimethalin over Cu2O/SnO2/graphene and SnO2/graphene nanocomposite photocatalysts under visible light irradiation

The Cu₂O/SnO₂/graphene (CSG) and SnO₂/graphene (SG) nanocomposite photocatalysts were prepared by simple sol-gel growth method, and characterized by Fourier transform infrared spectra (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET) measurements, respectively. The photocatalytic efficiency of catalysts were evaluated by degradation of pendimethalin under visible light irradiation (λ > 420 nm), which conformed that CSG and SG exhibited better photocatalytic activity than SnO₂ or graphene alone. An effort has been made to correlate the photoelectro-chemical behavior of these samples to the rate of photocatalytic degradation of pendimethalin.     

Effects of sodium oleate on synthesis and photocatalytic activity of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>@RGO

In this study, the effects of sodium oleate on synthesis of Bi₂WO₆/Bi₂O₃ loaded reduced graphene oxide photocatalyst was studied. The as-prepared composites were characterized by X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, UV–visible diffuse reflectance and photoluminescence spectroscopy. The results suggested that addition of sodium oleate not only promoted synthesis of Bi₂O₃, but also enhanced the reduction of GO to graphene. When the amount of sodium oleate was 4 mol (Bi:SO?=?1:1), Bi₂WO₆/Bi₂O₃@RGO to the best visible-light photocatalytic activity can be synthesized by a facile one-step solvothermal process without further reduction reaction. Hence, it indicated that sodium oleate could affect the synthesis of the as-prepared composites and the photocatalytic activity for degradation of RhB. This study did provide not only a facile method to synthesize Bi₂WO₆/Bi₂O₃@RGO, but also a method to reduce graphene oxide to graphene.     

TiO<Subscript>2</Subscript> nanocrystals grown on graphene as advanced photocatalytic hybrid materials

A graphene/TiO₂ nanocrystals hybrid has been successfully prepared by directly growing TiO₂ nanocrystals on graphene oxide (GO) sheets. The direct growth of the nanocrystals on GO sheets was achieved by a two-step method, in which TiO₂ was first coated on GO sheets by hydrolysis and crystallized into anatase nanocrystals by hydrothermal treatment in the second step. Slow hydrolysis induced by the use of EtOH/H₂O mixed solvent and addition of H₂SO₄ facilitates the selective growth of TiO₂ on GO and suppresses growth of free TiO₂ in solution. The method offers easy access to the GO/TiO₂ nanocrystals hybrid with a uniform coating and strong interactions between TiO₂ and the underlying GO sheets. The strong coupling gives advanced hybrid materials with various applications including photocatalysis. The prepared graphene/TiO₂ nanocrystals hybrid has superior photocatalytic activity to other TiO₂ materials in the degradation of rhodamine B, showing an impressive three-fold photocatalytic enhancement over P25. It is expected that the hybrid material could also be promising for various other applications including lithium ion batteries, where strong electrical coupling to TiO₂ nanoparticles is essential.     

Synthesis and characterization of BiFeO3/LaFeO3/graphene composites as persulfate activator for removal of 4-nitrophenol

4-Nitrophenol (4-NP) is used to manufacture drugs, fungicides, insecticides, and dyes. Discharge of industrial effluent containing 4-NP into the receiving water could result harmful effects on the environment and human beings. Therefore, in this study advanced oxidation process (AOP) using BiFeO₃/LaFeO₃/graphene (BFO/LFO/G) composites as catalysts is applied to evaluate the degradation of 4-NP in aqueous solution. LFO/BFO/G was synthesized and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, UV–Vis-diffuse reflectance spectroscopy (DRS), Photoluminesence (PL), Brunauer-Emmett-Teller (BET) surface area analysis, vibrating sample magnetometry (VSM), cyclic voltammetry, thermogravimetric (TGA) analysis and was further used to degrade 4-NP assists with peroxydisulfate (PS) and hydrogen peroxide (H₂O₂) under UV and visible light irradiation. Each experimental parameter was evaluated, including the initial NP concentration, pH, PS concentrations, and catalyst dosage. Compared to pure BiFeO₃, LaFeO₃ nanoparticles, and a BiFeO₃/LaFeO₃ composite, the BiFeO₃/LaFeO₃/graphene composites significantly increased the degradation of 4-NP. Optimal degradation was achieved with a BiFeO₃/LaFeO₃/graphene composite containing 5 wt% graphene and could degrade ～90.2 % of 4-NP within 2 h, with assisted of PS. The degradation of 4-NP in the presence of PS was more efficient under irradiation with visible light than UV light. The dominant mechanism of the degradation process was discussed. Additionally, the LC-MS results proposed the degradation path of 4-NP. Based on the results, the synthesized composites showed their ability to degrade 4-NP in aqueous solutions.     

Magnetic and photocatalytic properties of nanocrystalline ZnMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

The present study describes the synthesis of ZnMn₂O₄ nanoparticles with the spinel structure. These oxide nanoparticles are obtained from the decomposition of metal oxalate precursors synthesized by (a) the reverse micellar and (b) the coprecipitation methods. Our studies reveal that the shape, size and morphology of precursors and oxides vary significantly with the method of synthesis. The oxalate precursors prepared from the reverse micellar synthesis method were in the form of rods (micron size), whereas the coprecipitation method led to spherical nanoparticles of size, 40–50 nm. Decomposition of oxalate precursors at low temperature (∼ 450°C) yielded phase pure ZnMn₂O₄ nanoparticles. The size of the nanoparticles of ZnMn₂O₄ obtained from reverse micellar method is relatively much smaller (20–30 nm) as compared to those made by the co-precipitation (40–50 nm) method. Magnetic studies of nanocrystalline ZnMn₂O₄ confirm antiferro-magnetic ordering in the broad range of ∼ 150 K. The photocatalytic activity of ZnMn₂O₄ nanoparticles was evaluated using photo-oxidation of methyl orange dye under UV illumination and compared with nanocrystalline TiO₂. Dedicated to Prof. C N R Rao on his 75th birthday