High-<Emphasis Type="Italic">T</Emphasis><Subscript>C</Subscript> phase transition in K<Subscript>2</Subscript>Ti<Subscript>6</Subscript>O<Subscript>13</Subscript> lead-free ceramic synthesised using solid-state reaction

Solid-state reaction synthesised K₂Ti₆O₁₃ lead-free ceramic was characterized using XRD, SEM, and X-band EPR, at room temperature. EPR-spectra showed the presence of ( \textFe_\textTi^￠ - V_\textO ^·· ) \left( {{\text{Fe}}_{\text{Ti}}^{\prime } - V_{\text{O}}^{ \bullet \bullet } } \right) defect associate dipoles, in orthorhombic phase, responsible for the broadening of the dielectric anomaly identified in the ε _r (T) plots at T _C  ~ 300 °C. This anomaly resembled a ferroelectric–paraelectric type phase transition following Curie–Weiss type trend. Besides, dielectric loss mechanism jointly represented electrical conduction, dipole orientation, and space charge polarization.     

Microstructure,electrical properties of CeO<Subscript>2</Subscript>-doped (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoelectric ceramics

CeO₂-doped K_0.5Na_0.5NbO₃ lead-free piezoelectric ceramics have been fabricated by a conventional ceramic fabrication technique. The ceramics retain the orthorhombic perovskite structure at low doping levels (<1 mol.%). Our results also demonstrate that the Ce-doping can suppress the grain growth, promote the densification, decrease the ferroelectric–paraelectric phase transition temperature (T _C), and improve the dielectric and piezoelectric properties. For the ceramic doped with 0.75 mol.% CeO₂, the dielectric and piezoelectric properties become optimum: piezoelectric coefficient d ₃₃ = 130 pC/N, planar electromechanical coupling coefficient k _p = 0.38, relative permittivity ε_r = 820, and loss tangent tanδ = 3%.     

Effect of low level substitution of Sr–Ba on transport and magnetic behaviour of La<Subscript>0·67</Subscript>Ca<Subscript>0·33</Subscript>MnO<Subscript>3</Subscript>

In this paper we report the investigation of transition metal oxide compound, La_0·67Ca_0·25Sr_0·04Ba_0·04MnO₃ (LCSBMO), along with La_0·67Ca_0·33MnO₃ (LCMO), synthesized by sol–gel route under identical conditions. The effect of simultaneous low level substitution of large size ions such as Sr²⁺ and Ba^2 + for Ca^2 + ions on the electronic transport and magnetic susceptibility properties are analysed and compared apart from microstructure and lattice parameters. The temperature dependent electrical transport of the polycrystalline pellets of LCSBMO and LCMO when obeying the well studied law, r = r₀ + r₂   T²\rho = \rho_{0} + \rho_{2} \;T^{2} for T < T _MI , is observed to differ by more than 50% from the values of ρ ₀ and ρ ₂, with the former compound showing enhanced electrical conductivity than the latter. Similarly in fitting the adiabatic small polaron model for resistivity data of both the samples for T > T _MI , the polaron activation energy is found to differ by about 11%. In addition, the temperature dependent a.c. magnetic susceptibility study of the compounds shows a shift of about 6% in the paramagnetic to ferromagnetic transition temperature (285 K for LCSBMO and 270 K for LCMO).     

Electrical and oxygen sensing properties of Nd<Subscript>1−x</Subscript>Ba<Subscript>x</Subscript>CoO<Subscript>3</Subscript> ceramics

Nd_1?xBa_xCoO₃ (0?≤?x?≤?0.2) ceramics was synthesized by solid state reaction. All the samples have an orthorhombic perovskite structure (Space group P n m a). The electrical transport property indicates that Ba doped NdCoO₃ ceramics goes through semiconductor–metal phase transition. The electrical resistivity of Nd_1?xBa_xCoO₃ (0?≤?x?≤?0.15) ceramics decreases, while the electrical resistivity of Nd_0.8Ba_0.2CoO₃ ceramics increases with the increase of temperature. The chemical-sensing property shows that Nd_1?xBa_xCoO₃ ceramics is very sensitive to oxygen. Also, increasing Ba²⁺ doping concentration can reduce the oxygen desorption rate and increase the sensitivity of resistivity. These results indicate that Ba²⁺ doped NdCoO₃ ceramics is not only the good candidate of the cathode materials of solid fuel cells but also the good materials of gas sensor devices.     

Dielectric properties of (1 − <Emphasis Type="Italic">x</Emphasis>)KNbO3 · <Emphasis Type="Italic">x</Emphasis>BiMg<Subscript>2/3</Subscript>Nb<Subscript>1/3</Subscript>O<Subscript>3</Subscript> perovskite solid solutions

(1 − x) KNbO₃ · xBiMg_2/3Nb_1/3O₃ ceramic materials have been prepared by solid-state reactions. The materials with x < 0.3 have been shown to be perovskite solid solutions. Their average lattice parameter increases linearly with x. Like undoped KNbO₃, the solid solutions undergo a low-temperature (rhombohedral → orthorhombic) ferroelectric phase transition. The transition temperature increases almost linearly with x. The dc electrical conductivity of the ceramics exhibits Arrhenius behavior. The activation energy for conduction rises sharply near the phase transition temperature.     

Crystal structure and electrical properties of CaNaBi<Subscript>2</Subscript>Nb<Subscript>3</Subscript>O<Subscript>12</Subscript> ceramics

Monophasic CaNaBi₂Nb₃O₁₂ powders were synthesized via the conventional solid-state reaction route. Rietveld refinement of the X-ray powder diffraction (XRD) data and selected area electron diffraction (SAED) studies confirmed the phase to be a three-layer Aurivillius oxide associated with an orthorhombic B2cb space group. The dielectric properties of the ceramics have been studied in the 300–800 K temperature range at various frequencies (1 kHz to 1 MHz). A dielectric anomaly was observed at 676 K for all the frequencies corresponding to the ferroelectric to paraelectric phase transition as it was also corroborated by the high temperature X-ray diffraction studies. The incidence of the polarization–electric field (P vs. E) hysteresis loop demonstrated CaNaBi₂Nb₃O₁₂ to be ferroelectric.     

Magnetic and Superconducting Properties of Doped and Undoped Double Perovskite Sr<Subscript>2</Subscript>YRuO<Subscript>6</Subscript>

We report here SQUID (magnetization) measurements, along with supporting specific heat, Raman, SEM (scanning electron microscope), EDX (energy dispersive X-ray) and XRD (X-ray diffraction) measurements, on Cu-doped and undoped double perovskite Sr₂²⁺Y³⁺Ru⁵⁺O₆^2-\mathrm{Sr}_{2}^{2+}\mathrm{Y}^{3+}\mathrm{Ru}^{5+}\mathrm{O}_{6}^{2-} (abbreviated as SrY2116) system grown as single crystal using high-temperature solution growth technique. These measurements show the undoped system to be a nonmetallic (insulating) spin glass (SG) and the ∼5–30% Cu-doped (i.e. Cu-concentration/(Cu + Ru-concentration) ∼5–30%) system to be a spin glass superconductor (SGSC) with T _c (critical temperature) ∼28–31 K and superconducting volume fraction, f _sc∼2.2–9%. To mention, similar measurements done on undoped and Cu-doped BaY2116 and BaPr2116 systems show for them the same (SG, SGSC) behaviors. However they show a decrease in T _c and f _sc when diamagnetic Y³⁺ ions are replaced by Pr³⁺ spins, presumably due to enhanced internal pair breaking, and also decreased Cu–O–Cu overlap, owing to Pr³⁺ presence; these phenomena are known to exist in the Pr123 compound, PrBa₂Cu₃O_7−δ (δ∼0), due to ∼10% of Pr³⁺ ions having tendency to occupy Ba²⁺ sites. Measurements done on undoped and Cu-doped SrHo2116 show similar SG and SGSC properties. Further, the undoped and Cu-doped SrY2116 crystals grown by hydrothermal growth technique (i.e., grown using lower temperature and high pressure) show same behaviors. From these investigations it can be said that the undoped Ru-double perovskites (A₂BB′O₆, B′=Ru) are SG systems and that Cu-doped Ru-double perovskites (A₂BB′O _δ , δ∼6, B′=Ru_1−x Cu _x , 0<x≲0.3) are SG superconductors (SGSCs). Results are discussed.     

Phase transition and electrical properties of LiNbO<Subscript>3</Subscript>-modified K<Subscript>0.49</Subscript>Na<Subscript>0.51</Subscript>NbO<Subscript>3</Subscript> lead-free piezoceramics

Lead-free (1-x)K_0.49Na_0.51NbO₃-xLiNbO₃ (KNN-LN, x = 0 ~ 0.08) piezoelectric ceramics were prepared by the conventional solid-state sintering method. The effects of LiNbO₃ doping amount x on the phase transition behavior and the electrical properties of KNN-LN ceramics were investigated. By increasing LiNbO₃ doping amount x, the orthorhombic-tetragonal polymorphic phase transition (PPT) temperature (T _o–t) of KNN-LN ceramics shifted downwards, however, the Curie temperature (T _c) slightly moved upwards. The room temperature phase structure thus changed from orthorhombic to tetragonal across the compositions with 0.05 ≤ x ≤ 0.06, named as PPT region. The composition with x = 0.06 in the tetragonal side of PPT region exhibited optimized electrical properties of d ₃₃ = 246pC/N, k _p = 41.6%, ε _r = 679, tgδ = 0.028, and Q _m = 52. In addition to its very high T _c = 467 °C, this ceramic can be an excellent candidate for replacing the lead-based piezoceramics in high temperature applications.     

Superprotonic CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript>-CsHSO<Subscript>4</Subscript> solid solutions

We have performed partial HSO₄⁻ substitution in CsH₂PO₄ and studied the associated structural changes and the proton conductivity of the resultant (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions in the range x = 0.01–0.3. The results indicate that, at room temperature, the solid solutions are disordered. In the range x = 0.01–0.1, they are isostructural with the low-temperature phase of CsH₂PO₄ (sp. gr. P2₁/m), and their unit-cell parameters increase with x, whereas in the range x = 0.15–0.3 the solid solutions are isostructural with the high-temperature, cubic phase of CsH₂PO₄ (Pm3m), and their unit-cell parameter decreases. The conductivity of the (CsH₂PO₄)_{1 − x} (CsHSO₄) _x solid solutions with x ≤ 0.3 depends significantly on their composition and increases at low temperatures by up to four orders of magnitude, approaching that of the superionic phase of CsH₂PO₄ in the range x = 0.15–0.3 because of the hydrogen bond weakening and increased proton mobility. The conductivity of the superionic phase decreases with increasing x by no more than a factor of 1.5–2, and the superionic phase transition, which occurs at 231°C in CsH₂PO₄, shifts to lower temperatures and disappears for x ≥ 0.15. The activation energy for low-temperature conduction decreases with increasing x: from 0.9 eV in CsH₂PO₄ to 0.48 eV at x = 0.1.     

Synthesis and sintering of nano-sized BaSnO<Subscript>3</Subscript> powders containing BaGeO<Subscript>3</Subscript>

The formation of solid solutions of the type [Ba(HOC₂H₄OH)₄][Sn_1−x Ge _x (OC₂H₄O)₃] as BaSn_1−x /Ge _x O₃ precursor and the phase evolution during its thermal decomposition are described in this paper. The 1,2-ethanediolato complexes can be decomposed to nano-sized BaSn_1−x /Ge _x O₃ preceramic powders. Samples with x = 0.05 consist of only a Ba(Sn,Ge)O₃ phase, whereas powders with x = 0.15 and 0.25 show diffraction patterns of both the Ba(Sn,Ge)O₃ and BaGeO₃ phase. The sintering behaviour was investigated on powders with a BaGeO₃ content of 5 and 15 mol%. These powders show a specific surface area of 15.4–15.9 m²/g and were obtained from calcination above 800 °C. The addition of BaGeO₃ reduced the sintering temperature of the ceramics drastically. BaSn_0.95Ge_0.05O₃ ceramics with a relative density of at least 90% can be obtained by sintering at 1150 °C for 1 h. The ceramic bodies reveal a fine microstructure with cubical-shaped grains between 0.25 and 0.6 μm. For dense ceramics, the sintering temperature could be reduced down to 1090 °C, when the soaking time was extended up to 10 h.     

Large strain response in acceptor- and donor-doped Bi<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-based lead-free ceramics

Effects of Fe and La addition on the dielectric, ferroelectric, and piezoelectric properties of Bi_0.5Na_0.5TiO₃–Bi_0.5Li_0.5TiO₃–BaTiO₃–Mn ceramics were investigated. Similar to the doping effect in lead-based piezoelectric materials, here the Fe-doped ceramic created a hard effect with an improved mechanical quality factor (Q _m) ~ 160, coercive field (E _c) ~ 2.9 kV/mm, decreased dielectric constant ( e₃₃^T /e₀ ) ~ 80 3, \left( {\varepsilon_{33}^{T} /\varepsilon_{0} } \right)\sim 80 3, and loss (tanδ) ~ 0.024 while the La-doped one indicated a soft feature with improved piezoelectric constant (d ₃₃) ~ 184 pC/N, e₃₃^T /e₀   ~ 983, \varepsilon_{33}^{T} /\varepsilon_{0} \,\sim { 983}, tanδ ~ 0.033, and decreased E _c ~ 2.46 kV/mm. In addition, the temperature dependence of the ferroelectric hysteresis loops and strain response under unipolar electric field was also studied. Around the depolarization temperature T _d, large strain value was obtained with the normalized d₃₃^* d_{33}^{*} up to ~1,000 pC/N, which was suggested originated from the development of the short-range order or non-polar phases in the ferroelectric matrix. All these would provide a new way to realize high piezoelectric response for practical application in different temperature scale.     

Effects of addition of BiFeO<Subscript>3</Subscript> on phase transition and dielectric properties of BaTiO<Subscript>3</Subscript> ceramics

Samples of xBiFeO₃–(1 − x)BaTiO₃ (x = 0, 0.02, 0.04, 0.06, 0.07 and 0.08) were synthesized by solid state reaction technique and sintered in air in the temperature range 1,220–1,280 °C for 4 h. X-ray diffraction data showed that 2–8 mol% BiFeO₃ can dissolve into the lattice of BaTiO₃ and form single perovskite phase. The crystal structure changes from tetragonal to cubic phase at room temperature when 8 mol% of BiFeO₃ was added into BaTiO₃. Scanning electron microscope images indicated that the ceramics have compact and uniform microstructures, and the grain size of the ceramics decreases with the increase of BiFeO₃ content. Dielectric constants were measured as functions of temperatures (25–200 °C). With rising addition of BiFeO₃, the Curie temperature decreases. For the sample with x = 0.08, the phase transition occurred below room temperature. The boundary between tetragonal and cubic phase of the BiFeO₃–BaTiO₃ system at room temperature locates at a composition between 7 and 8 mol% of BiFeO₃. The diffusivity parameter γ for compositions x = 0.02 and x = 0.07 is 1.21 and 1.29, respectively. The relaxor-like behaviour is enhanced by the BiFeO₃ addition.     

Diffusion phase transition and impedance spectroscopy of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>/CuO co-doped BCZT lead-free ceramics

Perovskite type (Ba_0.85Ca_0.15?2x Bi_2x )(Zr_0.1Ti_0.9?x Cu _x )O₃ lead-free ceramics were prepared via a conventional solid-state reaction method. The phase structure, dielectric, ferroelectric properties and complex impedance were investigated in detail. XRD and dielectric measurements determined that single orthorhombic phase displayed in (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ at room temperature. With the introduction of Bi₂O₃/CuO, the phase structure exhibited the mixture of orthorhombic and tetragonal phases, and then turned to single tetragonal phase. In contrast to the sharp dielectric transition of (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ ceramics, a broad dielectric peak coupled with a slight decrease in Curie temperature was observed in (Ba_0.85Ca_0.15?2x Bi_2x )(Zr_0.1Ti_0.9?x Cu _x )O₃ ceramics with increasing x. The observed diffuse phase transition behavior was further confirmed by a couple of measurements with polarization loops and polarization current density curves. The structural and the composition fluctuations induced by ions doping should be responsible for the diffuse phase transition behavior. Furthermore, physical mechanisms of the conduction and relaxation processes were revealed by using impedance spectroscopy analyses. It was concluded that the conduction and relaxation processes were thermally activated, which was closely linked with the singly and doubly ionized oxygen vacancies.     

Influence of Sm substitution on the phase,microstructure and microwave dielectric properties of SrLa<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>17</Subscript>

New dielectric ceramics in the SrLa_4−xSm_xTi₅O₁₇ (0 ≤ x ≤ 4) composition series were prepared through a solid state mixed oxide route to investigate the effect of Sm⁺³ substitution for La⁺³ on the phase, microstructure and microwave dielectric properties. At x = 0–3, all the compositions formed single phase ceramics within the detection limit of in-house X-ray diffraction when sintered in the temperature range 1500–1580 °C. At x = 4, a mixture of Sm₂Ti₂O₇ and SrTiO₃ formed. The maximum Sm⁺³-containing single phase ceramics, SrLaSm₃Ti₅O₁₇, exhibited relative permittivity (ε_r) = 42.6, temperature coefficient of resonant frequency (τ _f ) = −96 ppm/^oC and quality factor (Q _u f _o ) = 7332 GHz. An analysis of results presented here indicates that SrLa_4−xSm_xTi₅O₁₇ ceramics, exhibiting τ _f  ~ 0 and ε_r ~ 53 could be achieved at x ~ 1.4 but at the cost of decrease in Q _u f _o .     

Synthesis and Superconductivity in Ba-doped (Ru,Cu)(Sr,Nd)<Subscript>2</Subscript>(Nd,Ce)<Subscript>2</Subscript>Cu<Subscript>2</Subscript>O<Subscript><Emphasis Type="Italic">z</Emphasis></Subscript> Compounds

We prepared various (Ru_0.5Cu_0.5)(Sr_1.67−x Ba _x Nd_0.33)(Nd_1.34Ce_0.66)Cu₂O _z samples with varying Ba contents by x=0, 0.1, 0.2, 0.33, 0.5 and 0.835. X-ray diffraction revealed that the phase purity of the samples increases as the Ba-doping content increases and single- phase compounds could be obtained for samples with 0.1≤x≤0.33. Contrary to the Ba-free sample, superconductivity could be induced by partially substituting Ba for Sr and superconductivity with onset T _c of about 15 K is observed for the sample with x=0.2. The superconducting behavior of the Ba-doped samples is discussed in conjunction with thermoelectric power measurements.     

Microwave dielectric properties of Ba<Subscript>5</Subscript>Nb<Subscript>4</Subscript>O<Subscript>15</Subscript> ceramic by molten salt method

Ba₅Nb₄O₁₅ powders were synthesized by molten-salt method in NaCl–KCl flux at a low temperature of 650–900 °C for 2 h, which is lower than that of the conventional solid-state reaction. This simple process involved mixing of the raw materials and salts in a certain proportion. Subsequent calcination of the mixtures led to Ba₅Nb₄O₁₅ powders at 650–900 °C. XRD and SEM techniques were used to characterize the phase and morphology of the fabricated Ba₅Nb₄O₁₅ powders, respectively. After sintering at 1,300 °C for 2 h, the densified Ba₅Nb₄O₁₅ ceramics with good microwave dielectric properties of ε_r = 39.2, Q × f approximated as 27,200 GHz and τ _f  = 72 ppm/°C have been obtained.     

Microstructure,phase transition and electrical properties of LiSbO<Subscript>3</Subscript>-doped (K<Subscript>0.49</Subscript>Na<Subscript>0.51</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoelectric ceramics

Microstructure, phase transition and electrical properties of (1 − x)K_0.49Na_0.51NbO₃ − xLiSbO₃ (x = 0–0.08) lead-free piezoceramics prepared by the conventional solid-state sintering method were investigated with an emphasis on the effects of LiSbO₃ doping amount x. SEM results showed that the ceramic became denser by increasing LiSbO₃ doping amount x. Being indexed by XRD profiles, the ceramics changed from an orthorhombic perovskite structure to a tetragonal one across a composition region of 0.04 ≤ x≤0.05. The sample of LiSbO₃ doping amount x = 0.05 in tetragonal side of the region had the maximum values of piezoelectric constant (d ₃₃ = 256 pC/N) and planar electromechanical coupling coefficient (k _p = 42.7%). Meanwhile, this ceramic sample showed other good properties such as ε _r = 1,463, tgδ = 0.036, Q _m = 48, P _r = 19.8 μC/cm², E _c = 1.9 kV/mm and T _c = 340 °C, which indicated it was a promising lead-free piezoelectric material for ultrasonic transducer applications.     

Effects of manganese additive on piezoelectric properties of (Bi<Subscript>1/2</Subscript>Na<Subscript>1/2</Subscript>)TiO<Subscript>3</Subscript>–BaTiO<Subscript>3</Subscript> ferroelectric ceramics

The microstructure, piezoelectric and dielectric properties of piezoelectric ceramics (Bi_1/2Na_1/2)_0.94Ba_0.06TiO₃+xwt%MnCO₃ (BNBT6–xMn) with x ranging from 0 to 1.5 were studied. X-ray diffraction patterns showed the samples exhibited perovskite structure and Mn additive turned the structure from tetragonal phase to rhombohedral phase. The results of SEM indicated the Mn additive promoted the sintering which was beneficial to the synthesis of the perovskite. With the amount of Mn additive up to 0.1 wt.%, the value of d ₃₃, k _p ,and ε were improved; While Q _m also was increased until 0.8 wt%. The Mn additive acted on the “soft” and “hard” function simultaneously; When the amount of Mn additive more than 0.8 wt%, the performance drops.     

Low-temperature synthesis of Sr<Subscript>0.3</Subscript>Ba<Subscript>0.7</Subscript>Nb<Subscript>2</Subscript>O<Subscript>6</Subscript> ultrafine powder and its characteristics

Ultrafine strontium barium niobate (Sr_0.3Ba_0.7Nb₂O₆, SBN30) powders were prepared by urea method starting from a precursor solution constituting of Sr (NO₃)₂, Ba (NO₃)₂, NbF₅, urea and polyvinyl alcohol (PVA) as surfactant. Their structural behavior and morphology were examined by means of X-ray diffractometry (XRD) and Scanning electron microscopy (SEM). The results showed that the SBN30 powders crystallized to a pure tetragonal phase at annealing temperatures as low as 750 °C. The average particle size of SBN powders subjected to 750 °C was of the order of 150–300 nm. With increasing calcination temperature,however, the average particle size of the calcined powders increased. The SBN30 ceramic prepared from urea method can be sintered at temperature as low as 1,225 °C. The transition temperature from the ferroelectric phase to the paraelectric phase and the relative dielectric permittivity of the SBN30 powder were less than the corresponding values of the bulk ceramic. The permittivity and loss tangent (tan δ) at room temperature (1 kHz) was found to be 930 and below 0.025.     

Synthesis,dielectric, and hysteresis behaviour of Ba(Nb<Subscript>0.2</Subscript>Ti<Subscript>0.8</Subscript>)O<Subscript>3</Subscript> ceramics and their solid solutions with BaZrO<Subscript>3</Subscript>

Solid state reaction technique was employed to synthesize Ba(Nb_0.2Ti_0.8)O₃ [BNT], and 0.9Ba(Nb_0.2Ti_0.8)O₃ + 0.1BaZrO₃ [BNT + BZ] samples. Sintered pellets were investigated for its dielectric (ε_r and tanδ) properties in the temperature range 100 K–380 K and in the frequency range of 100 Hz–1 MHz. The variation of ε_r and tan δ may be attributed to hopping of trapped charge carriers, which resulted in an extra dielectric response in addition to the dipole response. Hysteresis loop measurements were studied in the temperature regime 295 K–423 K. Loop area shrunk with the increase of temperature that may be due to phase transition from ferroelectric to paraelectric state.