A distributed adaptive block matching algorithm: Dis-ABMA

In the context of motion estimation for video sequences processing, variable block size algorithms, like the Adaptive Block Matching Algorithm (ABMA), have been proposed to match better “objects in motion” compared to the classical BMA. However, the variable block size grid derivation and the related motion estimation relies on a regularization process which implies heavy iterative and inter-dependent computations. Though the parallelization of the BMA is straightforward, the ABMA needs a deeper analysis before its implementation in a distributed environment: this is the goal of this paper. We first designed a modelization of the motion estimation of ABMA. This model can lead to several different distributed versions. A specific distributed model, with one master and several slaves, is then described. An implementation of this model has been realized and experimentations demonstrate a linear speedup with respect to the number of processors.     

非高斯有色噪声中基于四阶累积量噪声建模的谐波恢复方法

本文提出一种在非高斯ＡＲＭＡ噪声中谐波恢复的高阶累积量方法，该方法首先通过Ｈｉｂｌｅｒｔ变换构造复数观测值，然后使用它的一种特殊的四阶累积量建立噪声过程ＡＲ参数，由此对观测值滤波，最后通过ＳＶＤ－ＴＬＳ方法估计谐波信号参数，本文方法克服了以往对非高斯噪声分布的非对称性假设，成功地解决了对称分布非高斯有色噪声中的谐波恢复问题，并且适用于于谐波信号存在二次相应耦合情形，仿真实验验证了文中结论。     

基于SEP3203微处理器的FPGA验证平台

为了最大程度上提高ASIC设计的仿真效果，以制作实物的方式对ASIC设计的FPGA验证方法进行了研究，提出了一种基于SEP3203微处理器的FPGA验证平台系统解决方案。在方案描述中，首先给出了验证平台的总体框架，然后逐一介绍了平台的CPU——SEP3203微处理器、核心板硬件设计、FPGA板硬件设计、系统总线设计和电源系统设计，最后给出了平台的实物图。为了达到验证后代码不做任何改动就可直接用于流片的目的，对SRAM接口与ABMAAHB接口进行了研究，提出了在FPGA的SRAM接口后面增加ABMA AHB与SRAM接口转换电路的方法。实验证明，本平台可以提高SOC外围设备功能仿真的效果，达到了平台的设计目的。     

Maximum likelihood estimation of parameters of several continuous and discrete failure distributions

A comprehensive quantitative treatment is presented for maximum-likelihood estimation of parameters of the following continuous and discrete failure distributions: (1) Exponential, (2) Gamma, (3) Weibull, (4) Normal, (5) Lognormal, (6) Extreme value, (7) Poisson, (8) Binomial and (9) Geometric.     

CIGS薄膜(InGa)2Se3-富Cu-富In(Ga)的演变

采用三步共蒸发工艺顺序沉积铜铟镓硒(CuInGaSe2,CIGS)薄膜.薄膜的厚度、组份、晶相结构分别由台阶仪、X射线荧光光谱仪(XRF)和X射线衍射仪(XRD)来表征.在(In,Ga)2Se3预制层-富Cu相的演变过程中,依次发生以下相变:Cu(In,Ga)5Se8、Cu(In,Ga)3Se5、Cu2(In,Ga)4Se7(或Cu(In,Ga)2Se3.5)、Cu(In,Ga)Se2(液相CuxSe).在富Cu相-富In(Ga)相的演变过程中,依次发生以下相变:Cu(In,Ga)Se2(液相CuxSe)、Cu2(In,Ga)4Se7(或Cu(In,Ga)2Se3.5)、Cu(In,Ga)3Se5、Cu(In,Ga)5Se8.对这两个演变过程中薄膜的生长机理和结构特性进行了讨论.     

On the structure of linear codes with covering radius two and three

We obtain new bounds on l(m,r), the minimum length of a linear code with codimension m and covering radius r. All bounds are derived in a uniform way. We employ results from coding theory, some earlier results on covering codes, and combinatorial arguments. We prove the following bounds: l(6, 2)=13, l(7,2)=19, l(8,2)⩾25, l(9,2)⩾34, l(2m-l,2)⩾2^m+1 for m⩾3, l(14,2)⩾182, l(16,2)⩾363, l(18,2)⩾725, l(20,2)⩾1449, l(22,2)⩾2897, l(24,2)⩾5794, l(9,3)⩾17, l(10,3)⩾21, l(12,3)⩾31, l(13,3)⩾38     

Surface active buffered hydrogen fluoride having excellentwettability for ULSI processing

By incorporating selected hydrocarbon surfactants, a surface-active BHF (buffered hydrogen fluoride) has been tailored to achieve the following requirements: (1) the same etch rate as that of conventional BHF; (2) low contact angle; (3) nonsegregation; (4) nonfoaming; (5) low particulate count; (6) few impurities (possibility of purification); (7) low particulate adhesion on the wafer surface; (8) no surface residues; (9) excellent surface smoothness; and (10) high SiO ₂/Si etching selectivity. In order to satisfy these requirements, surfactants must satisfy the following characteristics: (1) good solubility in BHF; (2) hydrophilic property at the wafer surface, (3) nondecomposition in BHF; (4) nonreaction with BHF; and (5) sufficient lowering of contact angle at the critical micelle concentration (CMC). Aliphatic amines satisfy these requirements but have foaming problems. The requirements have been achieved using a binary surfactant system consisting of a combination of aliphatic amine and aliphatic alcohol or aliphatic acid     

Ca3(BO3)2的振动光谱分析

分别利用因子群对称分析法和位置群对称分析法对Ca₃(BO₃)₂晶体的振动模式进行了理论分析。Ca₃(BO₃)₂的晶格振动模式分为外振动和内振动模式,外振动模式为:3A_1g+4A_2g+7E_g+3A_1u+3A_2u+6E_u,内振动模式为：2A_1g+2A_2g+4E_g+2A_1u+2A_2u+4E_u。Ca₃(BO₃)₂晶体在布里渊区中心Γ点晶格振动的对称性分类为：5A_1g+6A_2g+11E_g+5A_1u+6A_2u+11E_u,其中声学模为：A_2u+E_u,拉曼活性光学模为5A_1g+11E_g,红外活性光学模为：5A_2u+10E_u,其余为非拉曼、非红外活性光学振动模。用高温固相法成功合成了Ca₃(BO₃)₂粉末,测量了它的室温Raman光谱,并利用群论分析的结果对谱图进行了讨论,指认了BO₃^3-基团的特征振动频率。     

Narrow-band systems and Gaussianity

The approach to Gaussianity of the outputy(t)of a narrow-band systemh(t)is investigated. It is assumed that the inputx(t)is ana-dependent process, in the sense that the random variablesx(t)andx(t + u)are independent foru > a. WithF(y)andG(y)the distribution functions ofy(t)and of a suitable normal process, a realistic boundBon the differenceF(y) -- G(y)is determined, and it is shown thatB rightarrow 0as the bandwidthomega_oof the system tends to zero. In the special case of the shot noise process begin{equation} y(t) = sum_i h(t - t_i) end{equation} it is shown that begin{equation} mid F(y) - G(y) mid < (omega_o/lambda) frac{1}{2} end{equation} wherelambda_iis the average density of the Poisson pointst_i.     

非对称多模量子叠加态光场的等幂高次和压缩

根据量子力学中的态叠加原理,构造了由多模复共轭相干态|{zj(a)*}>q和多模复共轭相干态|{zj(b)*}>q的相反态|{-zj(b)*}>q的线性叠加所组成的非对称两态叠加多模量子叠加态光场|ψ(2)>q,利用多模压缩态理论研究了态|ψ1f(2)>q的等幂高次和压缩特性,结果表明: 1)当Rj(a)=Rj(b)和ψj(a)-ψj(b)=±(2k 1)π(k=0,1,2,3……),态|ψ1f(2)>q的两个正交相位分量均处于N-H最小测不准态的结果;2)当Rj(a)=Rj(b)=Rj和ψj(a)=ψj(b)=ψj,ψ态|1f(2)>q的等幂高次和压缩与文献3的结果相似; 3)当Rj(a)≠Rj(b)=Rj和ψj(a)=ψj(b)=ψj,且和满足一定条件时,无论qN为奇数还是偶数,态|ψ1f(2)>q的两个正交相位分量均可分别呈现周期性变化的等幂高次和压缩效应,但qN为奇数时的压缩深度大于qN为偶数时的压缩深度。