线性时变对象的鲁棒自适应控制

本文用鲁棒自适应律解决了线性慢时变对象的模型参考自适应控制问题。我们引入文献[1]的鲁棒自适应律来调节被控对象的控制器参数,并对任意有界初始条件,证明了自适应环中所有信号的有界性。与文献[2]相比,这种方案的优点是保证了对象参数关于时间已知时,跟踪误差趋于零。     

周期时变时滞非线性参数化系统的自适应学习控制

针对一阶未知非线性参数化周期时变时滞系统, 设计了一种自适应学习控制方案. 假设未知时变参数, 时变时滞和参考信号的共同周期是已知的, 通过重构系统方程, 将包含时变时滞在内的所有未知时变项合并成为一个周期时变向量, 采用周期自适应律估计该向量. 通过构造一个Lyapunov-Krasovskii型复合能量函数证明了所有信号有界并且跟踪误差收敛. 结果被推广到一类含有混合参数的高阶非线性系统. 通过两个仿真例子说明本文所提出的控制算法的有效性.     

含有参数化和非参数化不确定性系统重复学习控制

针对含有参数化和非参数化的高阶非线性系统,设计了一种重复学习控制方案.假设未知时变参数和参考信号的共同周期是已知的,通过参数重组技巧,将所有未知时变项合并为一个周期时变向量.将改进Backstepping方法与分段积分机制相结合,构造了微分-差分参数自适应律和重复学习控制律,使跟踪误差在误差平方范数意义下渐近收敛于零.利用Lyapunov泛函,给出了闭环系统收敛的充分条件.仿真结果验证了该方法的有效性.     

一种新的时变系统极点配置自适应控制方法*

本文针对连续快时变系统，提出不要求系统参数未知部分上界的先验信息的自适应算法，得到间接自适应控制方案并且证明闭环系统稳定，仿真结果说明本文的方法有效．     

一类MIMO非线性时滞系统的鲁棒自适应控制

针对一类具有非线性输入的MIMO时变时滞系统,基于变结构控制原理,提出了一种稳定自适应控制器设计的新方案.该方案通过使用Lyapunov-Krasovskii(L-K)泛函抵消了因未知时变时滞带来的系统不确定性;进一步,利用Young's不等式和参数自适应估计取消了非线性死区输入模犁和不确定项假设中各种参数均为已知的要求.通过理论分析,证明了闭环控制系统半全局一致终结有界,跟踪误差收敛到零的一个邻域内.     

基于单神经元的自适应逆控制仿真研究

针对火电厂热工对象的变结构、变参数和时变等特点,不采用一般的单神经元自适应PID 控制,而是在此基础上加以改进,采用基于单神经元的自适应逆控制方案。通过大量的在各种环境变化和对象参数变化中的仿真研究表明,这种方法取得了很满意的控制效果,且控制算法简单,易于工程实现,有一定的实用价值。     

一种新的时变系统极点为配置自适应控制方法

本文针对连续快时变系统，提出不要求系统参数未知部分的先验信息的自适应算法，得到间接自适应控制方案并且证明闭环系统稳定，仿真结果说明本文的方法有效。     

时变系统的自适应跟踪控制*

本文将基于滑模变结构控制的模型偏差补偿控制方案，应用于一类线性时变系统的自适应控制，实现了高精度的连续轨迹跟踪，并且通过对典型时变对象－飞机的俯仰控制系统的仿真，证明了该方案在实际应用中的可行性。     

一种基于过程神经元网络辨识的PID控制模型及方法

针对非线性动态系统PID过程控制问题,提出了一种基于过程神经元网络辨识的PID参数自适应整定的控制模型和方法。利用过程神经元网络对于动态系统时变输入/输出信号的学习机制,在某种最优控制律下通过对被控对象进行辨识来追踪被控对象的输出对控制输入变化的灵敏度信息,实现参数自适应匹配的PID控制。给出了基于过程神经元网络辨识的PID控制系统结构以及相应的实现机制,实验结果验证了模型和算法的有效性。     

基于联合滤波算法的复杂时变系统在线自适应逆控制

针对一类结构和参数均具备时变特性的复杂时变系统,提出一种新的基于联合滤波算法的在线自适应逆控制方法.该方法在处理参数时变问题的同时可兼顾系统的结构时变特性,实现复杂动态系统的在线跟踪控制.同时提出新的联合Volterra核函数滤波算法,该算法克服了原Volterra滤波器计算复杂运算速度慢的缺点,实现了动态非线性系统的在线跟踪控制.通过仿真分析可以得出,对于此类线性、非线性复杂时变系统,基于新的联合滤波器的自适应逆控制方法可以快速有效的实现动态对象在线建模与控制.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。