共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
韩国是钢板桩主要生产国,钢板桩在韩国现代制铁公司进行安全生产和应用已有30年的历史了,主要介绍韩国现代生产钢板桩的品种、规格、性能参数以及产品应用优势。 相似文献
3.
4.
围绕津西集团(河北津西钢铁集团股份有限公司)引进阿赛乐钢板桩轧制技术,结合亚洲区域工程特点,在探讨具有津西特色的产品生产、研发之路的同时,分析国产热轧钢板桩的应用与市场前景。 相似文献
5.
6.
7.
本文主要论述异型生产线钢板桩生产过程中通过修改孔型、优化压下规程、规范调整方法、固化加热制度和轧制管理规定等工艺优化手段,优化推床开口度、完善辊道自控系统、导卫升级改造及改良轧辊冷却系统等设备改造技术,成功达到了钢板桩生产的成材率和单套轧辊轧制量大幅度提升,轧辊在线修磨时间为零的效果,取得了较大的经济效益。 相似文献
8.
主要介绍钢板桩在新光快速路雨水泵房深基坑支护中的应用.通过对钢板桩支护结构安全性、经济性的分析,论证了钢板桩支护在软土地区面积不大的深基坑中应用的合理性. 相似文献
9.
10.
热轧油能提高钢板表面质量和降低轧制力。从而节省能源并提高了产品的附加值。国内各大钢厂的相关技术人员都在探索和研制热轧油技术。在不久的将来,国内自己的热轧油技术将会广泛被应用到热轧厂中。主要讨论热轧油的金属压力加工专业问题.并对今后研究方向提出自己的看法。 相似文献
11.
The interlock of a roll formed U-section sheet steel piling under loading was analyzed by means of numerical simulation, and meanwhile the tensile failure experiment was conducted. The results indicated that under the same load, the interlock corners of roll formed steel piling are not only the regions with the lowest safety factor, but also the regions with the highest stress; there are two slippages in the tensile instability process of interlock. Each slippage can be regarded as a failure, and different types of failure mode should be used to evaluate the performance of steel pilings according to different applications. Due to the work hardening effect during the roll forming process, the hardness of the interlock material increases by 16% compared with that of the original sheet steel. It was also found that the instability strength obtained in tensile failure test is only 15.6% of the tensile strength of the original sheet steel. 相似文献
12.
13.
回顾了宝钢家电外板、彩管用钢、耐指纹钢和电工钢等产品及生产工艺技术的发展历史。介绍宝钢上述各类家电板的生产和技术现状及新产品开发情况。展望了宝钢在涂镀深加工家电板、热轧酸洗板、高强薄规格家电板、功能化家电板及“绿色”环保方面的发展前景。 相似文献
14.
15.
16.
17.
18.
八钢冷轧深冲钢以生产IF钢为目标,通过研究IF钢的机理,制定了相应的工艺制度,生产出的汽车用冷轧深冲钢产品力学性能较好,用户使用后满意。 相似文献
19.
Fiber-reinforced polymer (FRP) composites represent an alternative construction material without many of the performance disadvantages of traditional materials. The use of FRP as a pile material can eliminate deterioration problems of conventional piling materials in waterfront environments and aggressive soils. The driveability of traditional piling can be predicted using wave equation analysis of piles (WEAP). The input parameters used in WEAP are obtained by back-analyses of actual case histories. The properties of FRP piling differ from those of conventional piling, so conventional WEAP input parameters may not work as well for FRP composite piling. In this paper, WEAP input parameters for three composite pile types are calibrated using available driving records. The driveability of FRP composite piling is also compared with that of piling made of conventional materials such as timber, steel, and concrete. 相似文献
20.
为了研究与钢铁最为密切的有色金属锌在废钢中的资源蓄积量情况,以镀锌钢铁产品中产量最大的镀锌钢板为例研究了锌随钢铁的物质流循环路径,根据镀锌钢板在不同环境下使用过程中的腐蚀规律,建立起了镀锌钢板回收报废以及报废回收时携带锌的量的数学模型,并计算了不同使用寿命下中国镀锌钢板的报废回收资源蓄积量。计算结果表明,镀锌钢板报废回收的年限对中国镀锌钢板中蓄积的锌的资源量影响最大,报废回收期越长,当前锌资源蓄积量越少。到2010年中国镀锌钢板报废携带锌的累计蓄积量最大可以达到80万t。 相似文献