A new luminescent complex constructed by oxomolybdate and 3,5-di(4H-1,2,4-triazol-4-yl)benzoic acid via Mo–N bonds

A new complex namely, [(Mo₂O₆)L]·CH₃OH·3H₂O (1), based on oxomolybdate and 3,5-di(4H-1,2,4-triazol-4-yl)benzoic acid (L) was synthesized under hydrothermal condition, which shows a new three-dimensional supramolecular framework with unreported topological structure. In addition, the luminescent and electrochemical behaviors of complex 1 were investigated.     

Synthesis and antibacterial activities of some 2-amino-4-(1,1′-biphenyl-4-yl)-6-aryl-6H-1,3-thiazines

A series of new 2-amino-4-(1,1′-biphenyl-4-yl)-6-aryl-6H-1,3-thiazines has been synthesized, characterized by IR, ¹H NMR, ¹³C NMR, mass and elemental analyses and evaluated for in vitro antibacterial activity against some Gram-positive and Gram-negative bacteria. The antibacterial data revealed that the compounds had better activity against tested organisms than the reference norfloxacin.     

A new tri-nuclear Ag(I)-MOF as potential energetic materials constructed using (1e)-N′-hydroxy-2-(1H-1,2,4-triazol-1-yl) ethanimidamide and nitrates

The reaction of silver nitrate with (1e)-N′-hydroxy-2-(1H-1,2,4-triazol-1-yl) ethanimidamide (HTE) at room temperature affords a new 3D metal-organic frameworks, {[Ag₃(HTE)₂(NO₃)₂]·NO₃}_n (1). Single crystal X-ray diffraction analysis reveals that the three silver metal centers are bridged by two HTE ligands and Ag-Ag strong interactions in 1. The bridges provided through the nitrogen atoms on triazole-ring and the nitrogen atoms of the ethanimidamide resulted in a trinuclear units {Ag₃(HTE)₂} linked metal organic framework (MOF) structure. The MOF is displaying the trinuclear units that are connected via nitrates to give a 3D network. There are free nitrates incorporated in the channels of the MOF.     

Synthesis, Characterization and Optimum Reaction Conditions of Oligo-N, N′-bis (2-hydroxy-1-naphthalidene) Thiosemicarbazone

The oxidative polycondenzation reaction conditions of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (HNTSC) using air oxygen, H₂O₂ and NaOCl were studied in an aqueous alkaline medium between 50–90°C. Oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was characterized by ¹H-NMR, FT-IR, UV-Vis, size exclusion chromatography (SEC) and elemental analysis techniques. Solubility testing of oligomer was investigated using organic solvents such as DMF, THF, DMSO, methanol, ethanol, CHCl₃, CCl₄, toluene acetonitrile, ethyl acetate, concentrated H₂SO₄ and an aqueous alkaline solution. Using NaOCl, H₂O₂ and air O₂ oxidants, conversion to oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone (OHNTSC) of N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone was found to be 85, 80 and 76%, respectively, in an aqueous alkaline medium. According to the SEC analyses, the number-average molecular weight, weight-average molecular weight and polydispersity index values of OHNTSC synthesized were found to be 1050 gmol^–1 1715 gmol^–1 and 1.63, using NaOCl, and 2137, 2957 gmol^–1 and 1.38, using air O₂ and 2155 gmol^–1 4164 gmol^–1 and 1.93, using air H₂O₂, respectively. Also, TG analysis was shown to be unstable of oligo-N, N-bis (2-hydroxy-1-naphthalidene) thiosemicarbazone against thermo-oxidative decomposition. The weight loss of OHNTSC was found to be 97.29% at 900°C.     

3-(4-(1H-1,2,3-三氮唑)苯亚甲胺基)-2-甲基-4(3H)-喹唑啉酮的合成

以2-氨基苯甲酸和4-硝基苯甲醛为原料,在三氯化铈催化下反应合成了一种新型的标题化合物,该物质具有潜在的抗菌、抗炎活性,其结构经过IR、~1HNMR、~(13)CNMR、MS以及元素分析进行表征。     

Low-dielectric-constant aromatic homopolyimide and copolyimide derived from pyromellitic dianhydride, 4,4′-oxydianiline, 2,2-bis[4-(4-aminephenoxy)phenyl]propane, 1,4-bis(4-aminophenoxy)benzene,or 1,3-bis(4-aminophenoxy)benzene

Low-dielectric-constant aromatics, homopolyimide and copolyimide, were introduced. Homopolyimides were prepared by pyromellitic dianhydride (PMDA) as an anhydride monomer and 4,4′-oxydianiline (ODA), 2,2-bis[4-(4-aminephenoxy)phenyl]propane, 1,4-bis(4-aminophenoxy)benzene, or 1,3-bis(4-aminophenoxy)benzene as an amine monomer. The copolyimides were prepared with PMDA as an anhydride monomer, ODA as an amine monomer with the addition of 2,2-bis[4-(4-aminephenoxy)phenyl]propane, 1,4-bis(4-aminophenoxy)benzene, or 1,3-bis(4-aminophenoxy)benzene as another amine monomer. The polyimides were well characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, thermomechanical analysis, dielectric measurements, and tensile testing. The homopolyimide and copolyimides showed lower dielectric constants than the homopolyimide formed by ODA and PMDA. The results also indicate that the interchain distance, the quantities of phenyl ether, and the position of the substitute are factors that not only affected the thermal performance of polyimide by improving the molecular flexibility but also reduced the dielectric constant of polyimide by increasing the free volume of the molecular chain and decreasing the polarization points per unit volume. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47405.     

Synthesis and Characterization of the Luminescent Poly[2-decyloxy-5-(2′,5′-bis(decyloxy)phenyl)-1,4-phenylenevinylene]

A new soluble luminescent poly[2-decyloxy-5-(2′,5′-bis(decyloxy)phenyl)-1,4-phenylenevinylene] (DBDP-PPV) is prepared by the dehydrohalogenation of 1,4-bis(bromomethyl)-2-decyloxy-5-(2′,5′-bis(decyloxy)phenyl) benzene (as monomer) in this study. The above monomer bearing decyloxy and 2′,5′-bis(decyloxy)phenyl substituents was prepared via such chemical reactions as alkylation, bromination, and Suzuki coupling reactions. The two asymmetric substituents on the phenylene ring make the DBDP-PPV soluble in organic solvents and eliminate the tolan-bis-benzyl (TBB) structure defects. The structure and properties of the DBDP-PPV are examined by ¹H-NMR, FT-IR, UV/Vis, TGA, photoluminescence (PL), and electroluminescence (EL) analyses. The DBDP-PPV film exhibits a PL peak at 519 nm. With the DBDP-PPV acting as a light-emitting polymer, a device is fabricated with a sequential lamination of ITO/PEDOT/DBDP-PPV/Ca/Ag. The EL spectrum of the device shows a maximum emission at 507 nm. The turn on voltage of the device is about 15.6 V. Its maximum brightness is 4.67 cd/m² at a voltage of 16.8 V.     

Hydrazone-Tethered 5-(Pyridin-4-yl)-4H-1,2,4-triazole-3-thiol Hybrids: Synthesis,Characterisation, in silico ADME Studies,and in vitro Antimycobacterial Evaluation and Cytotoxicity

Compounds containing arylpyrrole-, 1,2,4-triazole- and hydrazone structural frameworks have been widely studied and demonstrated to exhibit a wide range of pharmacological properties. Herein, an exploratory series of new 1,2,4-triazole derivatives designed by amalgamation of arylpyrrole and 1,2,4-triazole structural units via a hydrazone linkage is reported. The synthesised compounds were tested in vitro for their potential activity against Mycobacterium tuberculosis (MTB) H₃₇Rv strain. The most promising compound 13 – the derivative without the benzene ring appended to the pyrrole unit displayed acceptable activity (MIC₉₀=3.99 μM) against MTB H₃₇Rv, while other compounds from the series exhibited modest to weak antimycobacterial activity with MIC₉₀ values in the range between 7.0 and >125 μM. Furthermore, in silico results, predicated using the SwissADME web tool, show that the prepared compounds display desirable ADME profile with parameters within acceptable range.     

Studies on the Use of N,N,N´,N´-Tetra(2-ethylhexyl) Diglycolamide (TEHDGA) for Actinide Partitioning. I: Investigation on Third-Phase Formation and Extraction Behavior

Abstract

Diglycolamides have emerged as an interesting class of extractants for actinide partitioning from high-level waste (HLW). N,N,N´,N´-tetraoctyl diglycolamide (TODGA) has been extensively studied for lanthanide-actinide co-extraction behavior. The present work deals with a branched isomer of TODGA, that is, N,N,N´,N´-tetra(2-ethylhexyl) diglycolamide (TEHDGA). TEHDGA was studied for the extraction of ²⁴¹Am and third-phase formation. The effect of using different phase modifiers on the prevention of the formation of a third phase during nitric acid extraction by TEHDGA along with the acid uptake behavior by TEHDGA in the presence of the modifiers was studied. The modifiers used for this purpose were di(n-hexyl)octanamide (DHOA), isodecanol, and n-decanol. The effect of the modifiers on the uptake of ²⁴¹Am as a function of acid concentration and as a function of modifier concentration was also examined. DHOA was found to be a suitable modifier, in spite of its high acid uptake. The uptake of lanthanides Ce, La, Eu, Gd, and Nd and elements such as Fe, Ni, Mn, Mo, Ru, Sr, and Cs with DHOA-modified TEHDGA–n-dodecane solvent systems were investigated. The results obtained indicated that, while DHOA-modified TEHDGA/n-dodecane extracted lanthanides and actinides, it did not show any significant uptake of other elements. Thus, the TEHDGA-DHOA/n-dodecane solvent system can be used effectively for the partitioning of lanthanides and actinides from HLW.     

Syntheses and Characterization of Two New M(II)-5,5′-dimethyl-2,2′-bipyridine (M = Cd and Pb) Coordination Polymers and Study of Their Thermal and Electrochemical Properties

Two new cadmium(II) and lead(II)-thiocyanato coordination polymers with 5,5′-dimethyl-2,2′-bipyridine (5,5′-dm-2,2′-bpy) as chelating ligands were synthesized and characterized by elemental analysis, IR and ¹H NMR spectroscopy and by X-ray crystallography. Thermal and electrochemical properties were also studied as well. These complexes have formed formula [Cd(5,5′-dm-2,2′-bpy)(NCS)₂]_n (1) and [Pb(5,5′-dm-2,2′-bpy)(CH₃COO)(NCS)]_n (2). The coordination numbers of Cd^II in 1 and Pb^II in 2 are six (CdN₄S₂) and seven (PbN₃O₃S₂), respectively. In 2, “stereo-chemically active” electron lone pairs and the coordination spheres were hemidirected. Bridging properties of thiocyanato anions in 1 and 2 created one- and two-dimensional coordination polymers, respectively. The supramolecular features in these complexes were guided and controlled by weak directional intermolecular interactions.     

Synthesis and Thermotropic Studies of a New Series of Teraryl Liquid Crystals 2-(4′-Alkoxybiphen-4-yl)-5-Cyanopyridines

A new series of teraryl 2-(4′-alkoxybiphen-4-yl)-5-cyanopyridines (nO-PPPyCN, n = 2–8) compounds, bearing a cyanopyridine terminus, were synthesized using a short 2-step reaction with overall yields between 33% and 69%. Spectral analyses were in accord with the expected structures. Thermotropic behavior of the teraryl compounds was investigated using polarised optical microscopy and differential scanning calorimetry. All compounds exhibited both enantiotropic nematic and smectic A phases, with an additional enantiotropic smectic C phase when n = 7 and 8. Polymesomorphism appears to be a common behavior in this series of linear liquid crystal compounds.     

Entry to alkynylplatinum(IV) chemistry using hypervalent iodine(III) reagents,and the synthesis of triphenyl{4,4′-bis(tert-butyl)-2,2′-bipyridine}iodoplatinum(IV)

The reaction of phenyl(alkynyl)iodine(III) triflates with diorganoplatinum(II) complexes provides a general route for the synthesis of a new class of alkynylplatinum(IV) complexes containing Pt^IVR₂(CCR²) groups, e.g., the 4,4^′-bis(tert-butyl)-2,2^′-bipyridine complexes PtIR₂(CCSiMe₃)(Bu^t₂bpy) (R=Me, Ph); IPh₂(OTf) reacts with PtPh₂(Bu^t₂bpy) to form the first archetypal triarylplatinum(IV) complex PtIPh₃(Bu^t₂bpy).     

A 3D Cu(II) coordination polymer constructed from BIBP (BIBP = 5,5′-bis(1H-imidazol-1-yl)-2,2′-bithiophene) ligand with semiconductive property

Hydrothermal reaction of Cu(NO₃)₂·3H₂O with BIBP and H₂hfipbb at 105 °C yielded a novel 3D Cu(II) coordination polymer, {[Cu₂(BIBP)_0.5(hfipbb)₂(CH₃CN)]·5H₂O}_n (1) [BIBP = 5,5′-bis(1H-imidazol-1-yl)-2,2′-bithiophene, H₂hfipbb = 4,4′-(hexafluoroisopropylidene)bis(benzoic acid)]. Compound 1 displays a 3D 2-fold interpenetrating framework with {4⁴.6⁶} sqp topology, containing interesting ⋯LRLR⋯ double helical chains. The compound 1 was characterized by IR spectra, elemental analysis, thermal analysis and single crystal X-ray diffraction. In addition, solid-state UV–vis spectra experiment shows that compound 1 exhibits semiconductive property with a band gap of 2.46 eV.     

Synthesis and tuning of chemical properties by protonation/deprotonation of novel dinuclear ruthenium complexes containing 2,6,2′,6′-tetra(4,5-dimethylbenzimidazol-2-yl)-4, 4′-bipyridine

A novel dinuclear ruthenium complex, [(tpy)Ru(tmbimbpyH₄)Ru(tpy)](ClO₄)₄, has been synthesized to introduce a new proton-induced molecular switching system, where tpy=2,2′:6′,2″-terpyridine and tmbimbpyH₄=2,6,2′,6′-tetra(4,5-dimethylbenzimidazol-2-yl)-4,4′-bipyridine. Both fully protonated and deprotonated forms of the dinuclear Ru complex were isolated and the forms were interchangeable by the addition of acid or base. A longer wavelength shift and a negative oxidation potential shift were observed when the protonated Ru complex was fully deprotonated.     

Synthesis,Characterization, and Evaluation of Gel‐Type Poly(4‐Vinylpyridine) Resins for Plutonium Sorption

Abstract

Three different cross‐linked (4, 8, and 12%) gel‐type strong‐base poly(4‐vinylpyridine) resins (PVP) have been synthesized and characterized by elemental analysis, IR, exchange capacity, and moisture content. The uptake of plutonium and uranium was measured as a function of nitric acid concentration using all the three PVP resins. Plutonium sorption and elution kinetics experiments were also performed on all three PVP resins and compared with the benchmark, a gel‐type quarternary ammonium type anion‐exchange resin. The plutonium sorption rate decreases with the increase in cross‐linkage of the resin. All the three PVP resins exhibit better elution kinetics compared to the benchmark. The results on kinetic experiments performed on all three‐gel‐type resins indicated 8% gel‐type PVP resin with 50–100 mesh as a better candidate for plutonium processing or purification. Radiation degradation studies were carried out on the 8% PVP resin by gamma irradiation up to 200 MRad. The irradiated resins were characterized by IR, TGA, and SEM.

The exchange capacity, moisture content, and plutonium uptake were also evaluated for the irradiated PVP resins in comparison with the benchmark. The results indicated a better radiation stability for PVP resin over the benchmark.     

Synthesis and properties of aromatic polyesters and brominated polyesters derived from α,α′-bis(4-hydroxyphenyl)-1,4(or 1,3)-diisopropylbenzene

The interfacial polycondensation technique was used for the preparation of polyarylates and brominated polyarylates. Polyarylates and brominated polyarylates were prepared by mixing a solution of diacid chloride such as terephthaloyl chloride, isophthaloyl chloride, or their mixture in dichloromethane with an aqueous alkaline solution of ,-bis(4-hydroxyphenyl)-1,4(or 1,3)-diisopropylbenzene or ,-bis(4-hydroxy-3,5-dibromophenyl)-1,4(or 1,3)-diisopropylbenzene using triethylbenzylammonium chloride as the phase transfer agent. Moderate to high molecular weight polyarylates with _inh up to 1.27 dL/g were obtained, and most of them could be cast into tough and flexible films depending on the polymer composition. In general, polymers containing more 1,3-isomer or isophthaloyl chloride moieties gave transparent and flexible films and had lower glass transition temperatures and higher solubility. Although these polymers have two isopropylidene linkages in their repeating units, they still exhibit moderately high thermal stability and show no obvious weight loss before 400 °C. The introduction of bromine on the polymer backbone caused a decrease of inherent viscosity, crystallinity, and thermal stability of the polyarylates, while causing an increase in glass transition temperature and a great enhancement of fire retardancy.     

Synthesis of Extraction Resin Containing N,N,N′,N′-Tetraisobutyl Diglycolamide and its Application for Separation of Sr(II) from Rb(I)

Abstract

A novel Levextrel resin containing N,N,N′,N′-tetraisobutyl diglycolamide (TiBDGA) was synthesized by suspension polymerization of styrene and divinylbenzene and its performance for separation of Sr(II) from Rb(I) was investigated. The effects of crosslink degree, stirring speed, and the ratio of porogenic-agents on the resin synthesized were examined. The optimum TiBDGA resin with 40 wt.% divinylbenzene as cross linking agent and 20 wt.% of n-octanol as porogenic-agents provided excellent adsorption capacity of 22.5 mg/g. The distribution coefficient (K _d) of Sr(II) in HNO₃ media onto the resin depended heavily on the acidity in the aqueous solution. The maximum K _d for Sr(II) (7300 mL/g) was observed when the HNO₃ concentration in aqueous phase reached 2 mol/L. The difference in the Sr(II) and Rb(I) distribution coefficients of several orders of magnitude implied that ⁸⁹Sr may be separated from ⁸⁶Rb with a radionuclide purity greater than 99%. And the maximum static adsorption capacity of Sr(II) on the resin was 22.5 mg/g.     

4-{[3-(三甲氧基硅烷基)丙氧基]甲基}-1H-1,2,3-三氮唑的合成和表征

以氯化苄为原料,通过叠氮取代生成苄基叠氮(Ⅰ),然后利用点击化学法合成1-苄基-3-羟甲基-1H-1,2,3-三氮唑(Ⅱ),其次利用威廉森反应将(Ⅱ)接枝在γ-氯丙基三甲氧基硅烷上得到1-苄基-4-{[3-(三甲氧基硅烷基)丙氧基]甲基}-1,2,3-三氮唑(Ⅲ),最后脱除苄基得到4-{[3-(三甲氧基硅烷基)丙氧基]甲基}-1H-1,2,3-三氮唑(Ⅳ),可用于制备燃料电池质子交换膜。用FT-IR、1H-NMR以及13C-NMR对产物的结构进行了表征,结果证实了合成路线的可行性。采用单因素实验和正交试验考察了反应温度、反应时间、反应物料物质的量比和催化剂用量等,在最佳工艺条件下得到每一步反应的平均收率分别为83.89%、92.60%、90.56%、71.39%。     

New optically active poly(amide-imide)s based on N,N′-(pyromellitoyl)-bis-L-amino acid and 1,3-bis(4-aminophenoxy) propane: Synthesis and characterization

Five new poly(amide-imide)s 8a–e were synthesized through the direct polycondensation reaction of five chiral N,N′-(pyromellitoyl)-bis-L -amino acids 3a–e with 1,3-bis(4-aminophenoxy) propane 7 in a medium consisting of N-methyl-2-pyrrolidone, triphenyl phosfite, calcium chloride, and pyridine. The polycondensation reaction produced a series of novel poly(amide-imide)s containing trimethylene moiety in the main chain in high yield with inherent viscosities between 0.34 and 0.65 dL/g. The resulted polymers were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Thermal properties of these polymers were investigated by using thermal gravimetric analysis (TGA) and differential thermal gravimetric (DTG). All of the polymers were soluble at room temperature in polar solvents such as N,N-dimethyl acetamide, N,N-dimethyl formamide, dimethyl sulfoxide, and N-methyl-2-pyrrolidone. N,N′-(pyromellitoyl)-bis-L -amino acids 3a–e were prepared in quantitative yields by the condensation reaction of pyromellitic dianhydride (1,2,4,5-benzenetetracarboxylic acid 1,2,4,5-dianhydide) 1 with L -alanine 2a , L -valine 2b , L -leucine 2c , L -isoleucine 2d , and L -phenyl alanine 2e in acetic acid. Also 1,3-bis(4-aminophenoxy) propane 7 was synthesized by using a two-step reaction. At first 1,3-bis(4-nitrophenoxy) propane 6 was prepared from the reaction of 4-nitrophenol 4 with 1,3-dibromoprapane 5 in NaOH solution. Then, dinitro compound 6 was reduced by using Na₂S. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of N-(4-Aminophenylethynylbenzonitrile)-N′ -(1-naphthoyl)thiourea as single molecular chemosensor for carbon monoxide sensing

This contribution reports on the design, preparation, and characterization of a novel acetylide-thiourea presenting N-(4-Aminophenylethynylbenzonitrile)-N′-(1-naphthoyl)thiourea (AETU) obtained from continuous reaction of intermediate compound 4[(4aminophenyl)ethynyl benzonitrile] (AMEB) with 1-naphthoyl chloride prior to form an active substrate for the detection of carbon monoxide (CO). These compounds were then characterized via several spectroscopic and analytical methods, namely Fourier transform infrared spectroscopy, UV–visible spectroscopy, nuclear magnetic resonance (¹H and ¹³C NMR), carbon, hydrogen, nitrogen, and sulfur elemental analysis, and Thermogravimetric analysis. The performance of sensor response toward CO was measured using difference response in spectral features of UV–VIS spectrophotometry in thin-film studies with and without the presence of CO. The findings revealed that AETU possibly has an interaction with CO of concentrations 10, 20 and 30 ppm. In addition, quantum chemical calculations also proved that AETU exhibits potential sense interaction toward CO with stabilization energy?6.30 kJ/mol and interaction distance is about 3.14 ?. This proposed material sensor gives an ideal indication for application in the aspect of direct detection of CO in real sample and for development of single molecule gas sensor devices.