共查询到20条相似文献,搜索用时 93 毫秒
1.
介绍了在运输部信息平台中实现油量实时显示的过程。油量传感器产生的电流模拟信号分成两路,一路传给无纸记录仪,另一路经过电压转变后送至信息平台的状态监测仪,经过状态监测仪的G2002B板处理后通过串口传给工控机,在信息平台上实现油量的实时显示,作用除了提醒司机适时加油以外,更重要的是判断机车作业的油耗情况。 相似文献
2.
辊缝润滑技术在酒钢CSP工厂已经应用了多年。它对降低电耗、稳定生产、改善轧辊表面质量和带钢质量等都起到了积极的作用,但是油量的波动问题一直制约着系统作用的充分发挥。通过对酒钢CSP辊缝润滑系统油量不稳定问题的研究,利用分流的原理提高了油泵的转速,有效解决了油泵电机因转速低而扭矩不足的问题,从而稳定了油量的控制,同时对头尾油量的控制进行了优化,取得了显著的效果,为同类企业使用辊缝润滑或小流量、精密、稳定控制提供借鉴。 相似文献
3.
卧式倾斜安装圆柱体油罐不同液面高度时贮油量的计算 总被引:3,自引:0,他引:3
用积分的方法导出了卧式倾斜安装圆柱体油罐不同液面高度时贮油量的计算公式,并举例说明其使用方法,为工矿企业对此种贮油装置进行油品盘点、成本考核及节油指标考虑提供了可靠依据。 相似文献
4.
柴油机油量控制套筒是一种结构复杂的机械零件,其外表面形状特殊,内表面分布若干台阶且具有较高的配合精度要求。本文基于粉末连续体,运用有限元Deform软件对油量控制套筒模具的不同改进方案(改进假芯棒、上浮动冲分型、设计漏粉穴、调整局部装粉系数)下的压坯密度进行模拟分析。通过数值模拟仿真数据对模具进行改进及尺寸优化,提高压坯密度分布的均匀性,实现采用粉末冶金近净成形的先进方法制造油量控制套筒,并满足其对精度、密度及性能的要求。 相似文献
5.
6.
7.
8.
由于履带车辆常运行于恶劣的环境中,采用动静液复合转向机构的某型履带车辆在转向过程中,静液系统压力存在较大的波动,严重影响了车辆的转向等性能.为了使履带车辆动、静液系统配合平稳,采用电液比例阀替代实车上采用的充油阀,并在Matlab仿真平台下建立了动静液复合转向的系统模型,对转向过程的静液系统压力变化等情况进行了仿真.为了改善系统的综合性能,设计了遗传PID控制器,控制器可根据静液系统压力渡动状况实时控制进入液力耦合器的油量.仿真结果表明,改进后的系统工作过程平稳,动态响应迅速,能够很好地抑制了转向过程中静液系统压力的波动,提高了车辆转向的综合性能. 相似文献
9.
研制了一种基于各向异性磁阻(AMR)传感器的车辆探测器.该车辆探测器由三维AMR传感器及相应的信号处理电路组成.当车辆驶过探测器上方时,车辆的存在将会引起周围磁场的变化,三维AMR传感器输出将发生相应的变化,根据AMR传感器的输出可判断周围空间内车辆的存在与否.对该探测器的特性进行了实验研究.实验结果表明:当车辆分别沿南北向、东西向通过AMR传感器上方时,传感器输出变化规律不同;该探测器可实现车辆探测. 相似文献
10.
11.
12.
论述了双旋涡发生体涡街流量计用于蒸汽流量测量遇到的难题及采用的对策。从理论和实践的结合上介绍了采用温度、压力自动补偿方法进行蒸汽流量测量的基本思想。结合实际,对温度变化引起仪表常数变化所造成的测量误差进行了分析,指出了修正方法,并就有关蒸汽测量中的一些具体问题提出了讨论。 相似文献
13.
《Baosteel Technical Research》2019,13(4)
Surface roughness considerably influences the stamping and coating performance of the automotive plates;however,the surface roughness of the automotive plates is transferred from the roll during the rolling process.Therefore,the variation and control technology regarding the roughness of the automotive plates and rolls has drawn increasing attention from researchers in China and around the globe.In this study,the research methods,analytical techniques prediction models,transfer rules,and control technologies regarding the surface roughness of the automotive plates and rolls were reviewed.Among these,an online measurement system for automotive-plate and roll surface roughness has been applied to the production lines of Germany,China,Belgium,Holland,Austria,and other countries and has achieved remarkable results.Online measurement and timely feedback regarding the auto motive-plate and roll surface roughness are needed to ensure favorable conditions for the establishment of automotive-plate roughness-control measurement. 相似文献
14.
15.
生产汽车蒙皮用铝合金板材的先进工艺 总被引:3,自引:1,他引:2
马道章 《有色金属材料与工程》2001,22(2):80-82
本文推荐了一种适于生产汽车蒙皮用铝合金板材的先进工艺-基于哈兹列特工艺的连续轧工艺。该工艺素以高产量、低成本及合金品种宽著称,唯铸板表面质量欠佳,但经过一系列工艺改进,板材的表面质量已能满足汽车蒙皮的要求,并在美国已被采用于项目建设。这是一种意义重大的突破,值得汽车制造业和铝加工业的重视。 相似文献
16.
17.
18.
Fazio Russell H.; Sanbonmatsu David M.; Powell Martha C.; Kardes Frank R. 《Canadian Metallurgical Quarterly》1986,50(2):229
Hypothesized that attitudes characterized by a strong association between the attitude object (AO) and an evaluation of that object are capable of being activated from memory automatically upon mere presentation of the AO. Three experiments, with 63 Ss, (primarily undergraduates), used a priming procedure to examine the extent to which the presentation of an AO would facilitate the latency with which Ss could indicate whether a subsequently presented target adjective had a positive or a negative connotation. Facilitation was observed on trials involving evaluatively congruent primes (AOs) and targets, provided that the AO possessed a strong evaluative association. In Exps I and II, preexperimentally strong and weak associations were identified via a measurement procedure. In Exp III, the strength of the object–evaluation association was manipulated. Results indicate that attitudes could be automatically activated and that the strength of the object–evaluation association determined the likelihood of such automatic activation. Implications for a variety of issues regarding attitudes—including their functional value, stability, effects on later behavior, and measurement—are discussed. (33 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
19.
分析了宝钢电厂1^#机组公用400 V P/C母线电源自动切换逻辑,指出了一例1^#机组公用400VP/C母线电源自动切换失败的原因,并提出了对切换逻辑的改进意见。通过改进,提高了母线自动切换的可靠性.同时对母线电源切换的一般原则进行了探讨。 相似文献