改性剂种类对蒙脱土结构和性能的影响

为增加蒙脱土(montmorillonite,MMT)和有机物的相容性和研究插层剂种类对MMT结构和性能的影响,采用Cu,Co和Ni无机金属阳离子,十二烷基磺酸钠、十二烷基硫酸钠、α-烯烃磺酸盐和十二烷基苯磺酸钠等有机阴离子表面活性剂及十六烷基氯化吡啶、十六烷基三甲基溴化铵、十二烷基三甲基溴化铵等有机阳离子表面活性剂作为改性剂,对蒙脱土进行一次改性和二次改性,制备出一系列改性蒙脱土.研究了改性剂种类、插层方式、插层次序对插层效果的影响.X射线衍射分析表明:一次改性时,插层剂均能进入蒙脱土的层间,改性土的层间距由1.04nm增加到1.7～3.52nm;二次改性时,先阳离子后阴离子的插层顺序有利于层间距增大(4.14nm),还可利用配位作用将二次改性剂引入金属离子一次改性MMT中,使层间距增大.改性机理研究认为:阳离子改性机理为层间离子交换,而阴离子改性机理是改性剂和MMT表面形成了氢键.沉降实验表明一次改性土和二次改性土在有机溶剂中分散能力有所增强.     

固相法改性蒙脱土及其在天然橡胶中的应用

用丙烯酰胺作改性剂,采用固相法对蒙脱土进行有机改性,用改性的蒙脱土通过机械共混制备了橡胶/蒙脱土纳米复合材料,并将混炼胶在硫化前进行了适当的热处理以提高插层效果.抽提后蒙脱土的红外图谱显示改性剂和蒙脱土之间形成了牢固的化学键合.X射线分析表明改性剂使蒙脱土的层间距由1.52 nm增大到1.88nm,热处理前后硫化胶中蒙脱土的层间距分别达到了4.19nm和4.41 m.     

Nanocomposites prepared with NR and solid-state organic modified montmorillonite

固相法改性蒙脱土及其在天然橡胶中的应用孙玉海,罗远芳,贾德民,傅伟文(华南理工大学材料科学与工程学院,广东广州510640)用丙烯酰胺作改性剂,采用固相法对蒙脱土进行有机改性,用改性的蒙脱土通过机械共混制备了橡胶/蒙脱土纳米复合材料,并将混炼胶在硫化前进行了适当的热处理以提高插层效果。抽提后蒙脱土的红外图谱显示改性剂和蒙脱土之间形成了牢固的化学键合。X射线分析表明改性剂使蒙脱土的层间距由1.52 nm增大到1.88 nm,热处理前后硫化胶中蒙脱土的层间距分别达到了4.19 nm和4.41 nm。     

天然钙蒙脱土的钠化改型和有机化改性

用碳酸钠作为钠化剂对天然钙蒙脱土进行了钠化改型,用CTAC、CTAB、C18三种插层剂分别对钠蒙脱土进行了有机插层改性。对钠化改型前后的蒙脱土进行了XRD、FTIR分析,对有机改性前后的蒙脱土用XRD、SEM、FTIR和TG-DTA等进行了表征和分析。结果表明:钙蒙脱土经钠化改型后,层间距增大,结晶度变差,活性增强;CTAC、CTAB、C18三种改性剂都能使蒙脱土的晶层间距有较大提高,其中,尤以C18改性剂的有机化效果最为显著;蒙脱土有机改性前后外观变化十分显著;有机改性蒙脱土的结构水无明显变化,层间吸附水显著减少,疏水的有机插层剂主要进入蒙脱土层间,大量脱去层间吸附的水分子,对晶体结构本身并无影响。有机改性后,蒙脱土的吸附水与层间水的脱水温度与脱水量均显著降低,有机插层剂的大量插入,改变了原土的亲水性使之变为疏水,并提高了其热稳定性。     

功能化聚乙烯蜡／有机蒙脱土插层复合母粒的研制

用两种不同改性剂与蒙脱土进行离子交换制得了两种有机蒙脱土，用功能化聚乙烯与有机蒙脱土进行熔融插层复合制备了功能化聚乙烯蜡/有机蒙脱土插层复合母粒，用X-射线衍射，傅立叶红外光谱，热重分析，差示扫描量热和抽提实验等对所得有机蒙脱土和功能化聚乙烯蜡/有机蒙脱土插层复合母粒的结构与性能进行表征。结果表明，有机蒙脱土层间距的增大和功能化聚乙烯蜡的极性活性官能团使得功能化聚乙烯蜡可以被插入到有机蒙脱土的夹层之间，甚至与层间的有机改性剂形成共价键而不被有机溶剂抽提出来。     

新型有机蒙脱土的制备、结构表征及其分散性

采用十二烷基磺酸钠及十六烷基三甲基溴化铵对蒙脱土进行了一次、二次插层改性,红外光谱和X射线衍射表明,两种有机插层剂均已进入蒙脱土的层间,有机蒙脱土的层间距由1.22 nm增加到3.64nm;沉降实验结果表明这种改性蒙脱土在有机介质中表现出很好的分散性.     

纳米蒙脱土有机改性及其在水性聚氨酯中的应用

介绍了纳米蒙脱土的结构、有机化改性剂的种类和有机改性纳米蒙脱土的制备方法;简述水性聚氨酯-蒙脱土纳米复合材料的制备,综述了有机化蒙脱土在改性水性聚氨酯中的应用,并对该类水性聚氨酯涂料的发展趋势和应用前景进行了展望。     

纳米蒙脱土的结构表征与应用研究

采用插层聚合的方法对蒙脱土进行了层间改性,通过X射线衍射仪、转矩流变仪、红外光谱仪等对改性蒙脱土的层间结构进行了表征,比较了改性蒙脱土对顺丁橡胶/聚苯乙烯、丁苯橡胶/聚酰胺、聚乙烯/聚苯乙烯共混物流变性能的影响。结果表明,苯乙烯是良好的插层剂,能使蒙脱土完全分层,可降低共混纳料材米的熔融黏度。     

蒙脱土改性研究进展

概括了蒙脱土(MMT)的结构与基本性质,综述了近几年国内外复合材料中MMT改性的研究进展。主要讨论了有机改性剂分子结构和改性工艺对MMT层间距的影响,并探讨了不同有机改性剂对MMT热稳定性的影响,展望了MMT改性研究前景。     

有机蒙脱土的制备及性能表征

以天然蒙脱土(MMT)为原料,用季铵盐和氨基酸作为有机插层剂与蒙脱土层间的阳离子进行交换,优化反应条件(改性时间、温度和搅拌速率),制备出层间距不同的有机蒙脱土,用FT-IR、XRD、TEM及TG对产物进行表征.结果表明,4种有机插层剂都已进入蒙脱土的层间,蒙脱土的层间距由1.25 nm增加到1.82～4.05 nm,其中,以1631-Cl为插层剂,改性时间为4 h,改性温度为80 ℃,搅拌速率为300 r/min时,制得的有机蒙脱土层间距大且晶形良好.     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。