共查询到19条相似文献,搜索用时 93 毫秒
1.
注塑件/注塑模报价及成本评估方法综述 总被引:3,自引:0,他引:3
介绍了注塑模的报价特点、报价方法,并对国内外注塑件/注塑模成本评估的主要研究方法进行了分析,利用CBR方法给出了自己的研究思路。 相似文献
2.
3.
从硬质合金烧前橡胶工艺的增塑性毛坯的特性研究与分析出发,对提高整体异型硬质合金毛坯的质量、降低生产成本、提高生产效率进行了初步探讨,列举了通过长期实践总结出的增速性合金毛坯机加工中夹持方法与刀具几何参数,比较了增塑工艺与一般工艺制造六刃铰刀的制造成本。 相似文献
4.
5.
6.
飞行模拟器作为良好的地面模拟仿真设备,具有许多优良的特性。借助飞行模拟器可以有效地进行飞行特性研究和飞行训练。在设计制造时,需要对模拟器进行评估以满足研究和训练要求,评估方法的研究已成为重点内容。综述了逼真度评估方法的研究现状,重点概述了结构模型方法和控制论2种方法。阐明了由于存在多种评估方法和标准,评估效果很难比较。分析了客观评估方法所面临的困难,展望了未来的研究方向。 相似文献
7.
8.
9.
10.
11.
模具报价与成本估算研究动态浅析 总被引:2,自引:1,他引:1
模具报价的核心是成本的核算,它是一个集技术、经验和市场信息的综合性的技术问题.针对这一问题说明了模具价格的基本组成,介绍了模具制造企业中常用的模具成本估算方法、模具报价的特点及报价策略,并对目前模具成本报价领域中的一些主要研究方法和技术手段进行了分析讨论. 相似文献
12.
13.
14.
注塑模具成本估算系统的设计及实现 总被引:1,自引:0,他引:1
采用工时法、BP神经网络法和CBR方法开发了一个注塑模具的成本估算系统,为快速准确地进行模具报价提供了一套有效可行的方法.介绍了系统总体设计和系统CBR方法实现中所用到的一些关键技术,并通过一个实例验证了此系统的有效性. 相似文献
15.
Although the product life cycle cost (LCC) is mainly committed by early design stages, designers do not consider the costs caused in subsequent phases of life cycle. The estimating method for the product life cycle cost in early design processes has been required because of both the lack of detailed information and time for a detailed LCC for a various range of design concepts. This paper suggests an approximate LCC method that allows the designer to make comparative LCC estimation between the different product concepts. The product attributes at the conceptual design phase and LCC factors are introduced and the significant product attributes are determined by statistical analysis. Neural network algorithms are applied to estimate LCC by considering the identified product attributes as inputs and the LCC as output. Trained learning algorithms for the known characteristics of existing products will quickly give the estimation of LCC for new product concepts. The estimation for maintenance and energy costs of electronic appliances is shown as an example. The proposed method provides the good estimation for the LCC and gives the guidelines leading to cost-effective design decision-making at the early design stage. 相似文献
16.
17.
18.
19.
介绍了一种便携式逆变交流方波氩弧焊机的设计方案。这种焊机既能用于AC/DC氩弧焊(TIG),又可用于直流焊条电弧焊(MMA),是一种多功能焊机。着重阐述了焊机的主要电路及其工作原理,包括输入和EMI滤波电路、一次逆变主电路、PWM脉宽调制电路和驱动电路、过电压保护和上电缓冲电路、交直流输出控制电路以及高频控制电路。介绍了焊机抗电磁干扰的一些方法。试验结果表明:这些电路和方法能够降低焊机成本,提高工作可靠性。 相似文献