共查询到20条相似文献,搜索用时 140 毫秒
1.
半埋式热管散热双层预装式变电站 总被引:1,自引:1,他引:0
介绍了重力热管的工作原理和半埋式热管散热双层预装式变电站的结构,并对热管散热效果进行了试验研究,给出了热管变压器样机的试验结果. 相似文献
2.
为提高功率模块的散热效率,此处将烧结铜粉式热管、沟槽式热管分别与3种不同结构的散热器组合,形成9种中央处理器(CPU)散热模块,探究热管放置方式、热管类型及不同热流密度下各散热模块热性能的分布规律及传热系数的变化趋势,以期获得最高效的散热方式。实验结果显示:在该实验工况下,L3-3号CPU散热模块散热性能最优,该模块热阻降低了46%;对比沟槽式热管,烧结铜粉式热管的热阻降低了34%;旋转180°条件下烧结铜粉式热管热阻较沟槽式降低了48.9%,具有更快的启动速率与更高的毛细压力,更适合与散热器结合组成高散热模块;正交实验热管极差较散热器极差降低了3.6℃,证明平板热管对高散热模块影响更大。 相似文献
3.
介绍了分离型热管式低压省煤器在长春热电二厂670t/h锅炉上的应用,并将其同普通式低压省煤器进行了经济、技术比较,简述了热管式低压省煤器相对于普通式低压省煤器的若干优势,并展示了热管式低压省煤器在降低锅炉排烟温度、充分利用烟气余热方面的广泛前景。 相似文献
4.
介绍了分离型热管式低压省煤器在长春热电二厂670t/h锅炉上的应用,并将其同普通式低压省煤器进行了经济,技术比较,简述了热管式低压省煤器相对普通式低压省煤器的若干优势,并展示了热管式低压省煤器的降低锅炉排烟温度,充分利用烟气余热方面的广泛前景。 相似文献
5.
6.
根据数台电厂锅炉热管式空气预热器设计和运行实践,对热管空气预热器的性能进行了分析和评价,提出了热管空气预热器设计的一些建议。 相似文献
7.
8.
热管是一种利用密闭管内工质相变来传递热量的高效传热元件,由它组成的换热器具有换热能力强、管壁温度便于调节等特点。近些年,由于热管技术的不断完善,热管式空气预热器在电站锅炉上得到了较多的应用,取得了一定的设计经验和实践经验。本文试图对电站锅炉热管式空气预热器的特点、现状和应用前景作一些分析。 相似文献
9.
采用热管冷却技术的太阳能光伏电–热一体化系统性能分析 总被引:2,自引:0,他引:2
太阳能光伏电–热(photovoltaic-thermal,PV-T)一体化系统将光伏组件与太阳能热利用系统组合在一起,具有较高的太阳能综合利用效率。针对热管具有高效传热和均温性能的特点,提出一种采用热管冷却技术的太阳能光伏电-热一体化系统;基于光伏电池板传热过程特点及换热器的传热有效度——传热单元数(ε-NTU)法,对热管式PV-T系统的电池板温度、冷却流体出口温度以及系统电效率和热效率等热电转换性能进行了理论分析和计算。结果表明,热管式PV-T系统的电池温度变化幅度在2.5℃以内,系统电效率和热效率分别达到6.99%~7.46%和51.0%~63.2%。该文提出的理论方法为研究热管式PV-T系统热电转换性能提供了一种新的途径,可用来分析和讨论相关参数对热管式PV-T系统性能的影响。 相似文献
10.
电站锅炉热管式空气预热器的发展和应用 总被引:1,自引:0,他引:1
本文介绍了电站锅炉管式,回转式空气预热器存在的问题,热管技术及热管换热器的发展,国外热管空气预热器在电站锅炉上的应用,实用于工业换热器使用的钢水重力热管相容性问题,国内热管空气预热器在电站锅炉上的应用情况,热管空气预热器性能评价和设计的若干经验。 相似文献
11.
12.
本文介绍了复配型稳定剂ND-01等筛选试验结果,针对南定热电厂循环水处理工艺的改进工作进行了探讨,并对水处理工况的调整提出了意见。试验证明复配型稳定剂ND-01等用于南定热电厂循环水处理是有效可行的。 相似文献
13.
Wiechmann Eduardo P. Ziogas Phoivas D. Stefanovic Victor R. 《Industry Applications, IEEE Transactions on》1985,(5):1226-1233
PWM voltage source inverters (VSI's) supplied from diode rectifiers are employed with most of today's static power supplies for variable frequency ac type loads. This method generates nonsinusoidal input and output voltage/current waveforms and yields poor system reliability. An upgraded method of power conversion is presented that eliminates both problems. In addition, it allows bidirectional power flow which improves efficiency and simplifies cooling requirements. The subject method requires a PWM rectifier and a PWM current source inverter. Advanced PWM techniques employed with both static Converters allow the minimization of all associated passive components. 相似文献
14.
Campbell J.B. Tolbert L.M. Ayers C.W. Ozpineci B. Lowe K.T. 《Industry Applications, IEEE Transactions on》2007,43(3):648-656
This paper presents a two-phase cooling method using the R134a refrigerant to dissipate the heat energy (loss) generated by power electronics (PEs), such as those associated with rectifiers, converters, and inverters for a specific application in hybrid-electric vehicles. The cooling method involves submerging PE devices in an R134a bath, which limits the junction temperature of PE devices while conserving weight and volume of the heat sink without sacrificing equipment reliability. First, experimental tests that included an extended soak for more than 850 days were performed on a submerged insulated gate bipolar transistor (IGBT) and gate-controller card to study dielectric characteristics, deterioration effects, and heat-flux capabilities of R134a. Results from these tests illustrate that R134a has high dielectric characteristics and no deterioration of electrical components. Second, experimental tests that included a simultaneous operation with a mock automotive air-conditioner (A/C) system were performed on the same IGBT and gate-controller card. Data extrapolation from these tests determined that a typical automotive A/C system has more than sufficient cooling capacity to cool a typical 30-kW traction inverter. Last, a discussion and simulation of active cooling of the IGBT junction layer with the R134a refrigerant is given. This technique will drastically increase the forward current ratings and reliability of the PE device 相似文献
15.
16.
本文简略讨论了双端小功率金属卤化物灯外玻壳的封口工艺,介绍了其半自动封口机的工作原理、结构布置及关键技术。在此设计的基础上稍加改进,便可完成中功率以上金属卤化物灯电弧管的夹封。 相似文献
17.
蒸发冷却技术面对的几个重要问题 总被引:10,自引:4,他引:6
蒸发冷却技术在经过四十年的研究和应用之后,已经在理论研究和工业实践方面取得了很大成就。蒸发冷却技术已经得到了我国电力部门和电机行业的认可,并正在逐步推广应用。在这种情况下,有必要在工业实践所获取的第一手资料的基础上,对蒸发冷却技术所诉理论物技术问题进行新一轮的研究,从而为蒸发冷却技术的继续发展提供动力。 相似文献
18.
针对以往配网可靠性指标计算依赖于故障率和故障持续时间而很难在实际中应用的问题,提出基于事故负荷损失指标(CLLI)的配电网多目标规划方法,证明了CLLI指标与系统平均停电持续时间(SAIDI)、用户平均停电持续时间(CAIDI)等可靠性评价指标具有很强的相关性;在计算指标值时考虑了不同负荷类型的可靠性需求,有效表示不同网架的可靠性程度;在配电网规划包含了分段开关、自动重合闸(RA)等设备的规划以增强配电网可靠性。使用改进的快速非支配遗传算法(NSGA-Ⅱ)对经济性和可靠性目标函数进行同时寻优,得到可行的非支配解;以一个21节点系统进行验证,表明所提模型和算法具有较强的可行性和高效性。 相似文献
19.
In power stations and substations of electric power companies, power semiconductor devices such as diodes and thyristors have been used in control power supplies and emergency power supplies since the 1970s. Such equipment is designed on the assumption that power semiconductor devices are semipermanent, since their service life is much longer than that of capacitors and resistors. Therefore, it is hard to find studies that have systematically examined the long‐term reliability of semiconductor devices. Such studies are very important from the viewpoint of ensuring reliability and improving the renewal period by proper equipment maintenance. This paper discusses the long‐term reliability of power semiconductor devices used in power station rectifiers and substation rectifiers. © 2001 Scripta Technica, Electr Eng Jpn, 136(3): 67–75, 2001 相似文献
20.
气温较高的华东、华南地区某些电厂的汽水分析取样装置尚存在减温性能不良的问题 ,导致样水温度超标 ,严重影响化学仪表的在线分析。文中通过计算和分析亚临界机组水汽取样分析装置减温热负荷及换热效率 ,指出一次冷却系统除盐冷却水量过大是引起这一问题的直接原因 ,并进而探讨亚临界机组最佳冷却水量及冷却方式 ,提出设备设计方面的建议 相似文献