Teaching Building Information Modeling as an Integral Part of Freshman Year Civil Engineering Education

Lack of personnel with Building Information Modeling (BIM) skills is a significant constraint retarding use of the technology in the architecture, engineering, and construction industry. Unless BIM is introduced into undergraduate civil engineering curricula in a fundamental way, graduate civil engineers will lack the skills needed to serve a construction industry in which three-dimensional models are the main medium for expression and communication of design intent and the basis for engineering analysis. A mandatory freshman year course titled “Communicating Engineering Information,” which teaches both theoretical and practical aspects of BIM, has been developed to replace the traditional engineering graphics course at the Technion. The main lesson learned through four semesters of teaching the class is that students find BIM tools intuitive and therefore relatively easy to learn; the majority of lecture hours are now devoted to the conceptual aspects of BIM and the principles for preparing models that can be analyzed in multiple ways. BIM can and should be taught in its own right, and not as an extension to computer-aided drawing. The skills students have been able to bring to bear in design courses later in their university education indicate that the approach is sound and will enable graduates to meet the needs of the civil engineering profession in the “BIM age.”     

Educational Partnership to Establish Engineering/Construction Management Graduate Programs in Algeria

This paper describes a partnership between the University of Missouri–Rolla and the Université Abou-Bekr Belka?d de Tlemcen in Algeria in order to support the development of programs of instruction and faculty training in Algeria in the areas of engineering and construction management in order to create a self-sustaining educational infrastructure in Algeria. Specifically, the partnership aims to provide educational and technical assistance to Algeria in order for them to develop: (1) new graduate programs in engineering and construction management and (2) modern teaching methodologies including Internet and distance learning. Objectives of the partnership were to provide engineering and construction management skills and expertise in order to achieve international standards in the management area. The desired impact is summarized in terms of the ability to identify operations problems and implement solutions for improved strategic competitiveness, make sound decisions, plan, and control the key resources of an organization—money and people, critically analyze, evaluate, improve, or adapt existing technical and managerial systems, design and develop new technical and managerial systems, and coordinate different projects with a better harmony and cost effectiveness. The long-term expected outcomes of the partnership are Algerian faculty with strong backgrounds in engineering and construction management, a self-sustained learning environment for Algerian institutions, including engineering management and construction management graduate programs, continuing education, and short courses, and Internet-based multimedia teaching material for collaboration between the Algerian institutions and local industry.     

Validity of students' evaluations of college teaching: A multitrait–multimethod analysis.

College instructors in 329 classes evaluated their own teaching effectiveness with the same 35-item rating form used by their students. There was student–instructor agreement in courses taught by teaching assistants (r?=?.46), undergraduate courses taught by faculty (r?=?.41), and graduate level courses (r?=?.39). Separate factor analyses of the student and instructor ratings demonstrated that the same 9 evaluation factors (e.g., work load, organization, interaction) underlay both sets of ratings. A multitrait–multimethod analysis supported convergent and divergent validity of these rating factors. Not only were correlations between student and instructor ratings on the same factors statistically significant for each of 9 factors, but correlations between their ratings on different factors were low. Findings demonstrate student–instructor agreement on evaluation of teaching effectiveness, support the validity of student ratings for both graduate and undergraduate courses, and emphasize the importance of using multifactor rating scales derived through the application of factor analysis. (28 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Group Dynamics in Projects: Don't Forget the Social Aspects

As faculty members, we have the opportunity to serve as references for our students. One of the questions potential employers invariably ask is, “How well does the student work with others?” The practicing engineer must have the knowledge required to function as a member of a team, combining each individual's expertise with the skills of others on the team. Numerous organizations, most notably the National Science Foundation (NSF) and the Accreditation Board for Engineering and Technology (ABET), have put an emphasis on the need to prepare engineers to work in such an environment. To address this need, we have instituted a series of projects, joining graduate industrial and systems engineers and undergraduate civil engineers, focusing on statistical applications in civil engineering. The courses chosen to pilot this program allow us to explore the hierarchical issues in project management and give us a multidisciplinary setting for potential projects. This paper discusses the issues of teamwork, leadership, and the difficulties of simultaneously creating a group identity and producing a quality product.     

Construction Management Program

The typical limitations of the existing construction management programs are the lack of an integrated approach to managerial decisions in real life construction environment, not enough emphasis on engineering design, construction methods and communication skills, and poor coordination between the undergraduate and the graduate studies. An effective construction management program should. integrate teaching on undergraduate and graduate levels and research. On the undergraduate level it should provide the students with a good insight into all managerial tasks in civil engineering projects. On the graduate level it should allow specialization in the various areas of interest both to the practicing engineers and also to students who wish to pursue an academic career. The program should strongly interact with research and engineering practice.     

Model for Faculty, Student, and Practitioner Development in Sustainability Engineering through an Integrated Design Experience

Sustainable development and the green building movement have been adopted faster than any recent movement in the engineering field. With over 40% of the total U.S. energy usage servicing the operation of commercial and residential buildings, this trend is well founded. Recent surveys of the industry indicate that within 4 to 5?years, a vast majority of engineering firms expect their business will be significantly dedicated to green building designs. In contrast, current academic institutions are not well positioned to prepare young engineers for this challenge, and current faculty are not well trained in the tenets of sustainability or the roles of engineers in this movement. Change must occur if the engineering and design professions are to remain relevant and responsive to societal needs. To accommodate this challenge, the writers have designed and implemented the Integrated Design Experience (IDeX), a capstone course in which undergraduate and graduate students interact with faculty and practitioners on real projects with challenging needs in sustainability. The course is designed to provide an actual and virtual space for the multitude of disciplines to interact on real designs to foster both improved research and outreach efforts. Expected outcomes from the course include both student and faculty learning on the methods and value of sustainable design as well as the development of an interdisciplinary network of faculty and practitioners involved in sustainable design. Learning is being evaluated using a continuous authentic assessment of design products. First-year results indicate that students learned interdisciplinary teamwork and communication skills, and they see substantial value in the authentic design experience. In future years, the development of the interdisciplinary network will be tracked by using social networking tools and by assessing faculty attitudes toward involvement in IDeX. Both metrics will be investigated using the diffusions of innovation framework. The combined evaluation will lead to an in-depth understanding of how the IDeX model can be scaled and replicated at other institutions.     

Using Senior Design Capstone as Model for Graduate Education

The Civil Engineering Department at Rose-Hulman recently modified its M.S. program in environmental engineering to replace the thesis with a structured design course. Our efforts are based on the hypothesis that engineers at the graduate level also need to be taught “how to design.” Recent pedagogical efforts emphasize the need for the baccalaureate-level engineer to learn how to design a standard product that meets the needs of a client within a determined budget. This level of design involves the integration of several technical tools as well as client preferences and other constraints such as codes, regulations, economics, etc. Senior design efforts, such as the one at Rose-Hulman, help the student to start this preparation. We argue that the master's-level student not only needs a higher level of technical skill, but also increased sophistication with design focusing on nonstandard problems. These problems have a higher level of technical requirements that require creative and often unique solutions. Rose-Hulman is attempting to prepare master's-level engineers with a client-sponsored investigative design project. “How to design” is taught to both graduate and undergraduate students via integrated capstone courses that are the subject of this paper.     

Toward a Broader Technical Education for Engineers

Engineers are educated with significant technical depth in their chosen engineering discipline. Yet almost exclusively engineers work in teams made up of those educated in many different disciplines. And the design tasks that engineers face are becoming much more complex requiring engineers with a broader technical education to develop innovative solutions. Due to the increasing complexity of modern engineering projects, successful engineering leaders must have some degree of competence in more than one engineering field. Educators should recognize that modern engineers require this diversity in technical skills, and should identify in engineering courses the “connections” in topics that are common to more than a single discipline. In addition, engineering students should be required to work in multidisciplinary teams before they graduate.     

Psychiatry clerkship success: skills and styles

In recent years, medical students and psychiatry have been a provocative mix, causing much concern among students and faculty. Disagreement has been frequently offered regarding clerkship content, degree of learning, and even the basic importance of the topic of psychiatry itself. To help overcome these problems, 10 suggestions are offered for a curriculum learning skill foundation and 13 suggestions for clerkship teaching staff approach. These truism ingredients have been the major formula of a successful psychiatry teaching program as consistently reported by almost a decade of students and faculty. It is believed these principles might have wider applicability for enhancement of student recruitment to psychiatry residencies and for general stimulation of interest and learning in clerkship programs of various medical disciplines. Relevant literature is cited which addresses some of these individual issues.     

Educating Students via Distance Learning for Civil Engineering Design

Two structural engineering courses were taught using distance-learning technology. One course was a graduate level, steel design course and the other was an undergraduate, elective, timber design course. Two-way live video and audio connections linked classrooms at San Jose State University and San Francisco State University. The interaction between student and teacher is discussed. These courses were the first time the California State University system offered students academic credit at either of two universities for a course taught via distance education from a single location. The challenges of teaching engineering design concepts via distance learning are discussed. Assessment of the teaching method was performed using student surveys and review of student grades. The assessment survey revealed that the students’ overall impression was positive. Grades received by the students at the Remote Site were lower than those at the Home Site, but this discrepancy may not have been a result of the distance-learning environment.     

Validity and generalizability of student ratings from between-classes and within-class data.

Examined the generalizability and validity of student (N?=?485) ratings by studying within-class and between-classes correlations of ratings with other variables for regular faculty teaching lecture courses as well as for graduate assistants teaching recitation sections. Results indicate that most ratings were highly generalizable but only some were related to learning and that certain aspects of both generalizability and validity varied with instructor's role and with level of data. The implications of these findings for the evaluation of teaching are discussed with reference to 2 alternative paradigms: construct validity and criterion development. (22 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Campus Construction as a Research Laboratory: Model for Intracampus Collaboration

Capital construction projects on university campuses produce experience opportunities and archived data. Meanwhile, construction engineering faculty seeks research projects and funding for graduate students who, in turn, seek additional practical experience. In response, symbiotic relationships, between an academic department with construction engineering proficiency and the administrative office that oversees campus construction, have formed at both The University of Alabama (UA) and The Pennsylvania State University (Penn State). At each institution, the intracampus collaboration provides funded opportunities and access to projects, which enable graduate students to successfully complete thesis research (M.S. and Ph.D.). Further, campus construction offices at both institutions are also realizing benefits from the collaboration, including a connection to academia, and have committed to continuing the relationship indefinitely. Aimed at helping other institutions establish and benefit from similar collaboration, this paper describes a model for research partnerships made possible by campus construction. The development of a model for intracampus construction collaboration is explained using separate experiences from UA and Penn State. Both positive results and lessons learned are shared.     

The graduate student viewpoint on internship preparedness: A 2008 council of university directors of clinical psychology student survey.

To better understand the graduate student viewpoint on quality of preparation provided by graduate programs in terms of the internship application process, the current study surveyed students enrolled in member programs of the Council of University Directors of Clinical Psychology (CUDCP). Six hundred seventy-four students completed a questionnaire designed to assess perceptions regarding preparation for the internship application process, relative prioritization of individual application components, and faculty behaviors that contribute to student anxiety related to the application process. Results demonstrated that student subgroups based on internship status (i.e., those who have not yet applied, current applicants, and current interns) significantly differed on many issues related to internship preparation. The findings suggest that graduate programs are not placing enough emphasis on the conveying of internship-related information early in a student's training. Furthermore, the findings highlight training techniques and faculty behaviors that can be adopted by programs to increase preparedness and reduce anxiety among applicants. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Predicting the Academic Performance of Construction Engineering Students by Teaching and Learning Approaches: Case Study

There are various teaching approaches that instructors may adopt in their quest to teach effectively, and students can choose from a range of learning approaches to help them achieve good grades. This study investigates the effectiveness of personal learning approaches adopted by undergraduates and the teaching approaches employed by instructors in the context of construction engineering courses. The research questions are as follows. (1)?What are the students’ learning approaches that lead to better academic achievement? (2)?What are the instructors’ teaching approaches that give rise to better academic achievement? The study also aims to construct a model to predict a student’s likely academic performance in a construction engineering course. The research design is a self-administered survey. Using a structured questionnaire consisting of questions relating to learning strategies and teaching approaches, data were collected from undergraduates who majored in construction engineering. Statistical analyses undertaken include Pearson correlation and multiple linear regression modeling. Pearson correlation analysis shows that both the Growing Teaching approach and the students’ Achieving Motive learning approach are significantly correlated with academic performance. A robust grade prediction model was developed, whereby a student’s grade in a construction engineering course may be predicted using one teaching approach (Growing Teaching) and three learning approaches (Achieving Motive, Achieving Strategy, and Deep Motive). To help students obtain higher grades in a construction engineering course, instructors should adopt the Growing Teaching approach, and students should adopt the Achieving Motive learning approach. Because students who adopt the Deep Motive learning approach are penalized with lower grades, it is recommended that instructors modify their teaching methods and approaches so that students do not take shortcuts in their learning without deeper regard for higher-order learning outcomes.     

Educating Engineers to Create a Sustainable Future

This paper was presented as the Simon W. Freese Lecture at the 2000 ASCE Annual Meeting in Kansas City, Kansas, July 24, 2000. It is obvious that an increasing global population with aspirations for a higher standard of living is significantly altering our natural systems. This affects the quality and quantity of life on earth. Technology is both partially the cause and a critical component of a future solution. Have engineering schools incorporated the topic of sustainability in meaningful ways? This paper attempts to answer this question. Findings are based on published literature and two questionnaires. The first survey went to environmental engineering faculty via the 724 Members of the Association of Environmental Engineering and Science Professors. Twenty two responses were received. The second questionnaire was sent to 600 U.S. based environmental professionals employed by Environmental Resources Management (ERM) as representatives of recent graduates. The paper concludes that the faculty believes that teaching principles of sustainability is important, even though many are generally ill informed, and that graduates should have a basic understanding, but they don’t. Although many colleges offer courses, only a few appear to be seriously incorporating sustainability concepts.     

The graduate record examination and selection of graduate students.

The sample was comprised of 50 students who entered the graduate program of the University of Florida between 1955 and 1959. The GRE Verbal and Quantitative aptitude scores were available on all of these students, and a complete undergraduate record on 38 of the 50 students… . Nine of the 11 full-time faculty were asked to rate each student." Only the GPA in math-science courses correlated significantly (.37) with the staff ratings. The "combination of X̄ GRE and GPA (math-science) yielded a multiple correlation of .46 with faculty ratings. Thus, combining these two predictors would be a definite improvement over selection based on either one alone." From Psyc Abstracts 36:04:4KJ48R. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Implementing an Inclusive Curriculum for Women in Engineering Education

Engineering faculty are urged to be “inclusive” when teaching classes of diverse students. Research has shown that an inclusive approach not only assists the progress of socially and culturally underrepresented students, but it will also broaden the perspectives of all students, and thus improve the overall quality of an engineering program. The writers of this paper have collaborated over a number of years at the University of South Australia to make engineering education more inclusive. This process commenced with an institutionwide project to develop inclusive curricula by improving the understanding and practice of faculty, and developing guidelines to assist them in restructuring their courses to become more inclusive. In the engineering departments, the process was further developed through staff workshops to assist faculty with the redevelopment of course curricula using the university guidelines, as well as the collection and dissemination of material and examples appropriate for engineering programs. This paper describes some of these methods in more detail, as well as the obstacles the writers have encountered and the devices they have used to overcome objections and impediments. Specific examples from civil engineering are included.     

Course design: an integration of didactic and experiential approaches to graduate training of group therapy

Graduate training programs attempt to teach group therapy courses using experiential learning methods and theoretical concepts. Presently, however, these courses often maintain a rather unstructured format for fostering an experiential group process. The literature suggests that without standardized course objectives, students are vulnerable to harm and inadequately prepared for professional demands, and faculty are insufficiently prepared with guidelines for instruction. This article reviews the historical evolution of experiential courses, raises questions about the ethical integrity of such courses in their current form, and proposes a new course design that integrates essential components of learning theory. Standards for integrating a developmental approach to learning, beginning with didactic tasks and advancing to more experiential tasks, more effectively uphold ethical principles, provide an outline for comprehensive instruction, and enhance student learning.     

Integrated Management Curriculum for Civil Engineers and Architects

While it is commonly thought worldwide that the education and training of architects and civil engineers require different patterns of learning, the writers of this paper opine that the teaching and learning of management subjects for both groups should be combined. Architecture and civil engineering faculties have many aspects in common, but, even when residing in the same faculty, the two disciplines rarely integrate successfully. This paper examines integration issues at the University of Auckland in New Zealand, where, over a period of 4 years, partial integration of architects and civil engineers in management subjects has been tested. The paper discusses the problems of devising a curriculum designed to satisfy both architecture and civil engineering undergraduate degree courses. Within the paper, discussion focuses on the outline for an integrated curriculum, the problems of timing, and logistics, and will report on some student experiences. Comment is also included on administrative issues, class size, relative merits of saving resources versus consequential inconvenience, the problems of making assumptions about relative prior knowledge, and expectations of students. Discussion of the various system changes that need to be put in place before such a liaison can be totally successful is presented. The paper provides valuable insight into the workings of two university faculties at the University of Auckland, which will allow parallels with other universities worldwide to be made.