Quantification of cell adhesion force with AFM: distribution of vitronectin receptors on a living MC3T3-E1 cell

Distribution of vitronectin (VN) receptors on a living murine osteoblastic cell was successfully measured by atomic force microscopy (AFM). First, the distribution of the integrin beta(5) subunit which constitutes a part of the VN receptor on the cell was confirmed by conventional immunohistochemistry after fixing the cell. To visualize the distribution of the receptor on a living cell by an independent and potentially a more quantitative method, the AFM was used with a microbead attached to the cantilever tip to increase the area of contact and VN was immobilized on the microbead. Force measurements were then performed over a large area of a living murine osteoblastic cell using the microbead covered with VN.     

Mechanical properties of plasma membrane and nuclear envelope measured by scanning probe microscope

Atomic force microscopy has been used to visualize nano‐scale structures of various cellular components and to characterize mechanical properties of biomolecules. In spite of its ability to measure non‐fixed samples in liquid, the application of AFM for living cell manipulation has been hampered by the lack of knowledge of the mechanical properties of living cells. In this study, we successfully combine AFM imaging and force measurement to characterize the mechanical properties of the plasma membrane and the nuclear envelope of living HeLa cells in a culture medium. We examine cantilevers with different physical properties (spring constant, tip angle and length) to find out the one suitable for living cell imaging and manipulation. Our results of elasticity measurement revealed that both the plasma membrane and the nuclear envelope are soft enough to absorb a large deformation by the AFM probe. The penetrations of the plasma membrane and the nuclear envelope were possible when the probe indents the cell membranes far down close to a hard glass surface. These results provide useful information to the development of single‐cell manipulation techniques.     

Immobilisation of living bacteria for AFM imaging under physiological conditions

Atomic force microscopy (AFM) holds great potential for studying the nanoscale surface structures of living cells, and to measure their interactions with abiotic surfaces, other cells, or specific biomolecules. However, the application of AFM in microbiology is challenging due to the difficulty of immobilising bacterial cells to a flat surface without changing the cell surface properties or cell viability. We have performed an extensive and thorough study of how to functionalise surfaces in order to immobilise living bacteria for AFM studies in liquid environments. Our aim was to develop a scheme which allows bacterial cells to be immobilised to a flat surface with sufficient strength to avoid detachment during the AFM scanning, and without affecting cell surface chemistry, structure, and viability. We compare and evaluate published methods, and present a new, reproducible, and generally applicable scheme for immobilising bacteria cells for an AFM imaging.     

Imaging of RNA in situ hybridization by atomic force microscopy

In this study we investigated the possibility of imaging internal cellular molecules after cytochemical detection with atomic force microscopy (AFM). To this end, rat 9G and HeLa cells were hybridized with haptenized probes for 28S ribosomal RNA, human elongation factor mRNA and cytomegalovirus immediate early antigen mRNA. The haptenized hybrids were subsequently detected with a peroxidase-labelled antibody and visualized with 3,3'-diaminobenzidine (DAB). The influence of various scanning conditions on cell morphology and visibility of the signal was investigated. In order to determine the influence of ethanol dehydration on cellular structure and visibility of the DAB precipitate, cells were kept in phosphate-buffered saline (PBS) and scanned under fluid after DAB development or dehydrated and subsequently scanned dry or submerged in PBS. Direct information on the increase in height of cellular structures because of internally precipitated DAB and the height of mock-hybridized cells was available. Results show that internal DAB precipitate can be detected by AFM, with the highest sensitivity in the case of dry cells. Although a relatively large amount of DAB had to be precipitated inside the cell before it was visible by AFM, the resolution of AFM for imaging of RNA– in situ hybridization signals was slightly better than that of conventional optical microscopy. Furthermore, it is concluded that dehydration of the cells has irreversible effects on cellular structure. Therefore, scanning under fluid of previously dehydrated samples cannot be considered as a good representation of the situation before dehydration.     

Differential mRNA expression in peripheral blood is associated with oral squamous cell carcinoma: Recent advances and future challenges

Oral squamous cell carcinoma (OSCC) is a malignant tumor triggered by the accumulation of multiple gene mutations in oral epithelial cells. Different OSCC-related biomarkers have been reported in circulation in the peripheral blood that support the occurrence and development of OSCC. Recent advances in high-throughput and highly sensitive detection methods have overcome the limitation of the low concentration of most peripheral blood biomarkers. Hence, blood biomarker detection has become an efficient screening tool for the early diagnosis of OSCC. The growing data available in public cancer and gene databases have provided new foundations for OSCC research. In particular, the identification of OSCC biomarkers using bioinformatic tools has shed new light on the underlying mechanisms as well as on the genetic landscape of OSCC. More recently, mRNA targeting therapies have emerged as valuable anticancer treatment strategies, as they allow for the regulation of the expression of certain functional proteins to reverse genetic abnormalities or induce tissue repair. Thus, mRNA-targeting therapies can be used to regulate the expression of antigens, antibodies, or cellular receptors by immune cells. Particularly, anti-cancer cellular immunotherapy carrying specific mRNAs has attracted significant attention in OSCC treatment. Here, we review the present knowledge on the role of peripheral blood mRNAs in the diagnosis, treatment, development, and prognosis of OSCC. Moreover, we address future research prospects of mRNAs in the peripheral blood in OSCC and the opportunities and challenges that may arise in future clinical therapeutic applications.     

Combination of AFM with an objective-type total internal reflection fluorescence microscope (TIRFM) for nanomanipulation of single cells

A new instrument was constructed by combining an objective-type total internal reflection fluorescence microscope with an atomic force microscope (AFM). Our purpose of constructing such an instrument is to detect and confirm the result of cellular level manipulations made with the AFM part through the detection system of the highly sensitive fluorescence microscope part. In this combination, manipulations are now possible from the nanometer to the micrometer scales and the fluorescence detection system is sensitive enough even for localizing single molecules. In this paper, we applied the system as a precise intracellular injector (nanoplanter). Fluorescent beads were first chemically immobilized onto a ZnO whisker that was glued to an AFM tip and were injected into a living BALB/3T3 cell together with the whisker. It was demonstrated that the system could clearly show the result of injection, that is, the presence of a small number of fluorescent beads in the cell.     

Using the atomic force microscope to observe and study the ultrastructure of the living BIU-87 cells of the human bladder cancer

In this study, the ultrastructure of living BIU-87 cells of human bladder cancer was mapped using atomic force microscopy to reveal the dynamic change of single cancerous cell division. Simultaneously, the feasibility and functional reliability of the atomic force microscope (AFM) were established and a laboratory model using AFM to study living cancerous cells was created. In this experiment, BIU-87 cells of human bladder cancer were cultured by conventional methods and grown in gelatin-treated dishes. A thermostat was used for preserving the cell's living temperature. Scanning of these cells using AFM was carried out in physiologic condition. The AFM images of the ultrastructure of living BIU-87 cells as well as those of the cell's membrane and cytoskeleton were very clear. The dynamic phenomenon of single cell division was observed. It was concluded that the AFM was able to observe and depict the ultrastructure of living cells of human bladder cancer directly and in real time. This experimental model is expected to play an important role in elucidating the cancerous mechanism of bladder normal cells at the atomic or nanometer level.     

Mapping of the receptor-associated protein (RAP) binding proteins on living fibroblast cells using an atomic force microscope

The distribution of the receptor-associated protein (RAP) binding protein and the adhesion forces between RAP and its binding protein on living fibroblast cells were examined using an atomic force microscope (AFM). The distribution of RAP binding protein was obtained on 256 (16x16) locations in 2x2 micro m sections over the surface of living cells. The adhesion forces between RAP and the binding protein were measured with an AFM tip functionalized with RAP. In the presence of RAP in the scanning solution, the number of force curves with large adhesion force decreased. These results indicate that the adhesive forces observed here represent specific binding between RAP and the binding protein. This method will be a useful application of AFM to examine receptors on cell surfaces in high resolution.     

Vacuolar structures can be identified by AFM elasticity mapping

Fluid-filled organelles like vesicles, endosomes and pinosomes are inevitable parts of cellular signalling and transport. Endothelial cells, building a barrier between blood and tissue, can form vacuolar organelles. These structures are implicated in upregulated fluid transport across the endothelium under inflammatory conditions. Vacuolar organelles have been described by transmission electron microscopy so far. Here, we present a method that images and mechanically characterizes intracellular structures in whole cells by atomic force microscopy (AFM). After crosslinking the cellular proteins with the fixative glutaraldehyde, plasma membrane depressions become observable, which are scattered around the cell nucleus. Nanomechanical analysis identifies them as spots of reduced stiffness. Scanning electron microscopy confirms their pit-like appearance. In addition, fluorescence microscopy detects an analogous pattern of protein-poor spots, thereby confirming mechanical rigidity to arise from crosslinked proteins. This AFM application opens up a mechanical dimension for the investigation of intracellular organelles.     

High resolution imaging of surface patterns of single bacterial cells

We systematically studied the origin of surface patterns observed on single Sinorhizobium meliloti bacterial cells by comparing the complementary techniques atomic force microscopy (AFM) and scanning electron microscopy (SEM). Conditions ranged from living bacteria in liquid to fixed bacteria in high vacuum. Stepwise, we applied different sample modifications (fixation, drying, metal coating, etc.) and characterized the observed surface patterns. A detailed analysis revealed that the surface structure with wrinkled protrusions in SEM images were not generated de novo but most likely evolved from similar and naturally present structures on the surface of living bacteria. The influence of osmotic stress to the surface structure of living cells was evaluated and also the contribution of exopolysaccharide and lipopolysaccharide (LPS) by imaging two mutant strains of the bacterium under native conditions. AFM images of living bacteria in culture medium exhibited surface structures of the size of single proteins emphasizing the usefulness of AFM for high resolution cell imaging.     

Carbon nanotubes: a promising standard for quantitative evaluation of AFM tip apex geometry

The direct contact between tip and sample in atomic force microscopy (AFM) leads to demand for a quantitative knowledge of the AFM tip apex geometry in high-resolution AFM imaging and many other types of AFM applications like force measurements and surface roughness measurements. Given, the AFM tip apex may change continuously during measurements due to wear or during storage due to oxidation, it is very desirable to develop an easy and quick way for quantitative evaluation of AFM tip radius when necessary. In this study, we present an efficient method based on Zenhausern model (Scanning 14 (1992) 212) by measuring single-wall carbon nanotubes deposited on a flat substrate to reach this goal. Experimental results show the method can be used for routine quantitative evaluation of AFM tip apex geometry for tips with effective radii down to the nanometer scale.     

Correlated fluorescence lifetime and spectral measurements in living cells

Studies of proteins' interaction in cells by FRET can take benefit from two important photo-physical properties describing fluorescent proteins: fluorescence emission spectrum and fluorescence lifetime. These properties provide specific and complementary information about the tagged proteins and their environment. However, none of them taken individually can completely quantify the involved fluorophore characteristics due to their multiparametric dependency with molecular environment, experimental conditions, and interpretation complexity. A solution to get a better understanding of the biological process implied at the cellular level is to combine the spectral and temporal fluorescence data acquired simultaneously at every cell region under investigation. We present the SLiM-SPRC160, an original temporal/spectral acquisition system for simultaneous lifetime measurements in 16 spectral channels directly attached to the descanned port of a confocal microscope with two-photon excitation. It features improved light throughput, enabling low-level excitation and minimum invasivity in living cells studies. To guarantee a fairly good level of accuracy and reproducibility in the measurements of fluorescence lifetime and spectra on living cells, we propose a rigorous protocol for running experiments with this new equipment that preserves cell viability. The usefulness of SLiM approach for the precise determination of overlapping fluorophores is illustrated with the study of known solutions of rhodamine. Then, we describe reliable FRET experiments in imaging mode realized in living cells using this protocol. We also demonstrate the benefit of localized fluorescence spectrum-lifetime acquisitions for the dynamic study of fluorescent proteins. proteins.     

High-sensitivity detection of proteins using gel electrophoresis and atomic force microscopy

We have developed a method to detect specific proteins with a high sensitivity using a gel electrophoresis method and force measurement of atomic force microscopy (AFM). Biotinylated proteins were separated by electrophoresis and fixed with cross-linking chemicals on the gel, followed by direct force measurement between the biotinylated proteins on the gel and a streptavidin-modified tip of an AFM cantilever. We were able to achieve a high enough sensitivity to detect the picogram order of the biotinylated proteins by evaluating the frequency of the interaction force larger than 100 pN in the force profile, which corresponds to the rupture force of interaction between streptavidin and biotin.     

Planar patch-clamp force microscopy on living cells

Here we report a new combination of the patch-clamp technique with the atomic force microscope (AFM). A planar patch-clamp chip microstructured from borosilicate glass was used as a support for mechanical probing of living cells. The setup not only allows for immobilizing even a non-adherent cell for measurements of its mechanical properties, but also for simultaneously measuring the electrophysiological properties of a single cell. As a proof of principle experiment we measured the voltage-induced membrane movement of HEK293 and Jurkat cells in the whole-cell voltage clamp configuration. The results of these measurements are in good agreement with previous studies. By using the planar patch-clamp chip for immobilization, the AFM not only can image non-adhering cells, but also gets easily access to an electrophysiologically controlled cellular probe at low vibrational noise.     

Atomic force microscopy can be used to mechanically stimulate osteoblasts and evaluate cellular strain distributions

In this study, atomic force microscopy (AFM) was used to mechanically stimulate primary osteoblasts. In response to mechanical force applied by the AFM, the indented cell increased its intracellular calcium concentration. The material properties of the cell could be estimated and the membrane strains calculated. We proceeded to validate this technique experimentally and a 20% error was found between the predicted and the measured diameter of indentation. We also determined the strain distributions within the cell that result from AFM indentation using a simple finite element model. This enabled us to formulate hypotheses as to the mechanism through which cells may sense the applied mechanical strains. Finally, we report the effect of the Poisson ratio and the cell thickness on the strain distributions. Varying the Poisson ratio did not change the order of magnitude of the strains; whereas the cellular thickness dramatically changed the order of magnitude of the cellular strains. We conclude that AFM can be used for controlled mechanical stimulation of osteoblasts and that cellular strain distributions can be computed with a good accuracy when the cell is indented in its highest part.     

Imaging surface and submembranous structures with the atomic force microscope: a study on living cancer cells, fibroblasts and macrophages

Atomic force microscopy (AFM) has been used to image a wide variety of cells. Fixed and dried-coated, wet-fixed or living cells were investigated. The major advantage of AFM over SEM is the avoidance of vacuum and electrons, whereas imaging can be done at environmental pressure and in aqueous conditions. Evidence of the successful application of AFM in biological imaging is provided by comparing results of AFM with SEM and/or TEM. In this study, we investigated surface and submembranous structures of living and glutaraldehyde-fixed colon carcinoma cells, skin fibroblasts and liver macrophages by AFM. Special attention was paid to the correct conditions for the acquisition of images of the surface of these cells, because quality SEM examinations have already been abundantly presented.
AFM imaging of living cells revealed specific structures, such as the cytoskeleton, which were not observed by SEM. Membrane structures, such as ruffles, lamellipodia, microspikes and microvilli, could only clearly be observed after fixing the cells with 0.1% glutaraldehyde. AFM images of living cells were comparable to SEM images of fixed, dried and coated cells, but contained a number of artefacts due to tip–sample interaction. In addition, AFM imaging allowed the visualization of cytoplasmic submembranous structures without the necessity for further preparative steps, allowing us: (i) to follow cytoskeletal changes in fibroblasts under the influence of the microfilament disrupting agent latrunculin A; (ii) to study particle phagocytosis in macrophages. Therefore, in spite of the slow image acquisition of the AFM, the instrument can be used for high-resolution real-time studies of dynamic changes in submembranous structures.     

AFM/CLSM data visualization and comparison using an open-source toolkit

There is a vast difference in the traditional presentation of AFM data and confocal data. AFM data are presented as surface contours while confocal data are usually visualized using either surface- or volume-rendering techniques. Finding a common meaningful visualization platform is not an easy task. AFM and CLSM technologies are complementary and are more frequently being used to image common biological systems. In order to provide a presentation method that would assist us in evaluating cellular morphology, we propose a simple visualization strategy that is comparative, intuitive, and operates within an open-source environment of ImageJ, SurfaceJ, and VolumeJ applications. In order to find some common ground for AFM-CLSM image comparison, we have developed a plug-in for ImageJ, which allows us to import proprietary image data sets into this application. We propose to represent both AFM and CLSM image data sets as shaded elevation maps with color-coded height. This simple technique utilizes the open source VolumeJ and SurfaceJ plug-ins. To provide an example of this visualization technique, we evaluated the three-dimensional architecture of living chick dorsal root ganglia and sympathetic ganglia measured independently with AFM and CLSM.     

Visualization of single proteins from stripped native cell membranes: A protocol for high‐resolution atomic force microscopy

Atomic force microscopy (AFM) proved to be able to obtain high‐resolution three‐dimensional images of single‐membrane proteins, isolated, crystallized, or included in reconstructed model membranes. The extension of this technique to native systems, such as the protein immersed in a cell membrane, needs a careful manipulation of the biological sample to meet the experimental constraints for high‐resolution AFM imaging. In this article, a general protocol for sample preparation is presented, based on the mechanical stretch of the cell membrane. The effectiveness for AFM imaging has been tested on the basis of an integrated optical and AFM approach and the proposed method has been applied to cells expressing cystic fibrosis transmembrane conductance regulator, a channel involved in cystic fibrosis, showing the possibility to identify and analyze single proteins in the plasma membrane. Microsc. Res. Tech. 76:723–732, 2013. © 2013 Wiley Periodicals, Inc.     

Contactless determination of nuclear compressibility using 3D image- and model-based analysis of drug-induced cellular deformation

Mechanical properties of the chromatin-bearing nucleus in normal and pathological cells are of general interest for epigenetics and medicine. Conventional techniques for quantitative measurements of material properties of cellular matter are based on application of controlled forces onto the cellular or nuclear boundary and do not allow probing intracellular structures that are not directly accessible for physical contact inside the living cell. In this work, we present a novel approach for contactless determination of the nuclear compressibility (i.e. the Poisson's ratio ν) in living cells by means of image- and model-based analysis of drug-induced cell deformation. The Poisson's ratio of the HeLa cell nucleus is determined from time-series of 3D images as a parameter of constitutive model that minimizes the dissimilarity between the numerically predicted and experimentally observed images.