High‐performance biobased epoxy derived from rosin

Great achievements have been made in the research of biobased thermoplastic polymers, but the progress concerning thermosetting resins has been minor. In particular, research on high‐performance thermosetting polymers from renewable feedstock has not been reported elsewhere. A novel biobased epoxy was synthesized from a rosin acid. Its chemical structure was confirmed using ¹H NMR, ¹³C NMR and Fourier transform infrared spectroscopy. The results indicated that the rosin‐based epoxy possessed high glass transition temperature (T_g = 153.8 °C), high storage modulus at room temperature (G′ = 2.4 GPa) and good thermal stability. A rosin‐based epoxy with excellent properties was achieved. The results suggest it is possible to develop high‐performance thermosetting resins from renewable resources. Copyright © 2010 Society of Chemical Industry     

Prospective materials for biodegradable and/or biobased pressure-sensitive adhesives: a review

A pressure-sensitive adhesive (PSA) is an adhesive system that is permanently tacky and adheres to a variety of surfaces with light pressure without phase changes. These adhesives are most commonly found in adhesive tapes such as the Scotch® tape or Post-it® notes. The majority of PSAs are petroleum-based products and usually not biodegradable. The amount of waste generated from these products is quite large as these products are considered disposable. The present review focuses on biodegradable elastomers and how they can be useful in PSAs. This review also covers some novel PSA systems that are biobased or biodegradable.     

Multifunctional epoxy resins: Synthesis and characterization

The tetrafunctional epoxy resins were prepared starting from diaminodiphenylmethane, diaminodiphenylether, and diaminobibenzyl. The obtained resins were characterized by IR and ¹H‐NMR spectroscopy, rheological and thermal techniques. The polymerization reaction was investigated by viscosimetry. The flow activation energy and the polymerization activation energy were evaluated from the rheological data and from the critical parameters (critical time and critical viscosity at gel point). The viscosity measurements and gel time determination showed slight differences between the synthesized resins. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2430–2436, 2000     

生物质环氧树脂固化剂的研究进展

综述了近年来生物质环氧树脂固化剂(BEPCA)的研究进展,主要包括以腰果酚、香兰素、松香、木质素和植物油等作为原料制备的生物质胺类固化剂、生物质酸酐类固化剂和多元酚、羧酸及酯类生物质固化剂等;详细介绍了上述BEPCA的结构、制备方法、合成路线以及其固化产物的性能;最后,总结并展望了BEPCA未来的发展趋势.     

Synthesis,characterization, and properties of multifunctional naphthalene-containing epoxy resins cured with cyanate ester

Multifunctional naphthalene-containing epoxy resins derived from 2,7-dihydroxylnaphthalene were synthesized and the intermediates were characterized by Fourier transform infrared spectroscopy, elemental analysis, and mass spectrometry. The cured products from naphthalene-containing epoxy resin and the dicyanate ester of bisphenol A (DCBA) exhibited a better T_g and a lower coefficient of thermal expansion than those of the commercial epoxy system. The glass transition temperature, thermal stability, and moisture absorption were found to increase with the epoxy functionality when naphthalene-containing epoxy resins were cured with DCBA. Thermogravimetric analyses revealed that the DCBA-cured system had a better thermal stability than that of the 4,4′-diaminodiphenylsulfone (DDS)-cured system. The addition of a metallic catalyst into the epoxy resin/cyanate ester system not only facilitated the cyclotrimerization of the cyanate ester but also the polyetherification of the epoxy resin. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 1611–1622, 1999     

环氧树脂改性超支化聚酯的合成及性能

以偏苯三酸酐、环氧氯丙烷及甲基丙烯酸缩水甘油酯为原料合成了超支化聚酯(HBP),再通过超支化聚合物的羧基与环氧树脂环氧基的反应得到环氧改性超支化聚合物;用GPC1、H-NMR、DSC、TGA表征了环氧改性超支化聚合物的结构和热性能;比较了不同环氧树脂用量改性前后树脂的光反应活性以及光固化涂层的耐擦洗性和硬度,测定了凝胶率-曝光时间曲线;以环氧改性超支化聚合物配制了光刻胶,在混合光源以及接触曝光的条件下,分辨率达到2~3μm,且图像十分清晰,断面整齐。环氧树脂用量为HBP羧基物质量的70%左右时,改性的超支化聚酯的光固化活性有明显提高,力学性能得到明显改进。     

笼型倍半硅氧烷环氧树脂的合成与表征

以3-缩水甘油丙氧基三甲氧基硅烷(GTMS)为原料在异丙醇(IPAP)中水解缩合制成笼型倍半硅氧烷环氧树脂(POSSEP),用红外光谱(FTIR)、~1H-NMR、热重分析(TGA)和液相色谱-质谱联用仪(LC/MS)对其结构进行了表征。LC/MS分析结果表明,合成的笼型倍半硅氧烷环氧树脂以T_(10)为主,另外还含有一定量的T_8以及少量的T_9。热重分析结果表明,笼型倍半硅环氧树脂具有良好的耐热性。在失重5%时的温度为364．5℃,在444．7℃时降解速率最快,800℃以后笼型硅环氧树脂质量基本不变,900℃时的剩余质量为40%。     

脂环族环氧树脂／双酚A环氧树脂共混改性研究

采用脂环族环氧树脂（EPL-4221）与双酚A型环氧树脂E-51共混,用酸酐固化剂和促进剂使其固化,研究脂环族环氧树脂的用量对共混树脂性能的影响及其规律性,包括冲击强度、弯曲强度、拉伸强度、维卡软化点温度、漆膜的粘附力、铅笔硬度、耐磨性以及拉伸剪切强度。结果表明,随脂环族环氧树脂用量的增加,共混树脂的综合性能先增加后降低,脂环族环氧树脂的质量分数为15％-20％时,具有最大值。     

石油树脂在热熔压敏胶中的应用

综述了石油树脂在热熔压敏胶中的应用,特别是在以SIS、SBS型HMPSA中的应用,最后指出了石油树脂今后在热熔压敏胶中应用的研究方向。     

Synthesis,characterization, and properties of silicone–epoxy resins

Silicone–epoxy (SiE) resins were synthesized through the hydrolytic condensation of 2‐(3,4‐epoxycyclohexylethyl) methyldiethoxysilane (EMDS) and the cohydrolytic condensation of EMDS with dimethyldiethoxysilane. Structural characterization was carried out by ¹H‐NMR, ²⁹Si‐NMR, and mass spectrometry analysis; the resins were linear oligomers bearing different numbers of pendant epoxy groups, and the average number of repeat Si O units ranged from 6 to 11. Methyhexahydrophthalic anhydride was used to cure the SiE resins to give glassy materials with high optical clarity. The cured SiE resins showed better thermal stability and higher thermal and UV resistances than a commercial light‐emitting diode package material (an epoxy resin named CEL‐2021P). The effect of the epoxy value on the thermal and mechanical properties and the thermal and UV aging performances of the cured SiE resins were investigated. The SiE resins became more flexible with decreasing epoxy value, and the resin with the moderate epoxy value had the highest thermal and UV resistances. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of reactive soybean oils for use as a biobased thermoset resins in structural natural fiber composites

Biobased thermosets resins were synthesized by functionalizing the triglycerides of epoxidized soybean oil with methacrylic acid, acetyl anhydride, and methacrylic anhydride. The obtained resins were characterized with FTIR, ¹H‐NMR, and ¹³C‐NMR spectroscopy to confirm the functionalization reactions and the extent of epoxy conversion. The viscosities of the methacrylated soybean oil resins were also measured for the purpose of being used as a matrix in composite applications. The cross‐linking capability was estimated by UV and thermally initiated curing experiments, and by DSC analysis regarding the degree of crosslinking. The modifications were successful because up to 97% conversion of epoxy group were achieved leaving only 2.2% of unreacted epoxy groups, which was confirmed by ¹H‐NMR. The ¹³C‐NMR confirms the ratio of acetate to methacrylate methyl group to be 1 : 1. The viscosities of the methacrylated soybean oil (MSO) and methacrylic anhydride modified soybean oil (MMSO) were 0.2 and 0.48 Pas, respectively, which indicates that they can be used in resin transfer molding process. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polymeric reagents: Part 1. Synthesis of polymer-anchored amines useful for curing epoxy resins

A range of polymers carrying amino-functions [NHEt, NHBuⁿ, NEt₂, NPr, N(CH₂CH₂CH₂NH₂)₂, NMeCH₂CH₂CH₂NH₂ or NEtCH₂CH₂CH₂ NH₂] has been synthesised via amination of styrene-vinylbenzyl chloride copolymers, poly(epichlorohydrin) and poly(2-chloroethyl vinyl ether), and via homopolymerisation and copolymerisation (with styrene) of (n-butyl)(vinylbenzyl)-ammonium chloride. Some of the polymers showed promise as curing agents for epoxy resins.     

Synthesis and thermal properties of combined liquid crystalline epoxy resins

Liquid crystalline epoxy resins were prepared by the curing reaction of epoxy and amine compounds with a mesogenic group in the mesomorphic temperature range. Some epoxy resins exhibited a typical liquid crystalline phase. Curing reaction of a mesogenic epoxy compound with an aliphatic amine compound containing cyano biphenyl group was faster than that of another epoxy resins confirmed by thermally controlled Fourier transform infrared measurements. The glass transition temperature of the liquid crystalline epoxy resin containing cyano biphenyl group increased with increasing curing reaction time. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1979–1990, 1998     

Synthesis,characterization, and antimicrobial studies of newly developed metal‐chelated epoxy resins

A series of novel metal‐chelated epoxy resins have been synthesized by the condensation of epichlorohydrin (1‐chloro‐2, 3 epoxy propane) with bisphenolic metal chelates in alkaline medium. The bisphenolic chelates were initially prepared by the reaction of 3‐formyl‐4, 4′‐dihydroxy diphenyl methane and diamine (ethylenediamine/o‐phenylenediamine) in 1:2 molar ratio and then with Cu(II), Ni(II), and Co(II) acetate. The metal‐chelated epoxy resins were characterized by various instrumental techniques, such as elemental analysis, DSC and TGA, electronic, FTIR, ¹H‐NMR, and ¹³C‐NMR spectra. The physicochemical properties, viz., epoxide equivalent weight (eq/100 g), hydroxyl value (eq/100 g), refractive index, specific gravity, and specific viscosity were measured by standard procedures. The antimicrobial activities of these chelated resins were screened against Escherichia coli, Staphylococcus aureus, Bacillius subtilis (bacteria), and Candida albicans, Mucor species (yeast) by using agar well diffusion method. All the polymeric chelates show promising antimicrobial activities. Among these polymeric chelates (ERPD)‐Cu(II) shows better antimicrobial activities, which can be attributed to higher stability constant of Cu(II) chelate than others. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1347–1355, 2006     

Tetrafunctional aliphatic epoxy I. Synthesis and characterization

A low viscosity tetrafunctional epoxy resin was synthesized by reacting amino-terminated polydimethylsiloxane with epichlorohydrin followed by dehydrohalogenation. The synthesized tetrafunctional aliphatic epoxy resin had an epoxy equivalent weight of 382, M_n of 1492, M_w of 2296, and a viscosity of 4.2 poise at 25°C. The chemical structure of the tetrafunctional aliphatic epoxy resin was studied by gel permeation chromatography (GPC), Fourier transform infrared spectra (FTIR), and ¹H-NMR spectra. Results showed the tetrafunctional aliphatic epoxy-blended aromatic epoxy resin possessed high impact strength and flexural strength. SEM photographs were investigated to study the compatibility of the blended epoxy system. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 51–58, 1998     

新型含磷环氧树脂的研究进展

有机和无机磷化物是新一代无卤、环保和绿色新型阻燃改性单体,可合成具有优异热稳定性、阻燃特性和物理机械性能的新型含磷环氧树脂。综述了DOPO的结构性能和化学反应性,以及以DOPO和氧氯化磷为原料合成新型含磷中间体和环氧树脂的结构、合成方法及性能等。     

Synthesis and characterization of epoxy based nanocomposites

Epoxy‐clay nanocomposites were synthesized to examine the effects of the content and type of different clays on the structure and mechanical properties of the nanocomposites. Diglycidyl ether of bisphenol‐A (epoxy) was reinforced by 0.5–11 wt % natural (Cloisite Na⁺) and organically modified (Cloisite 30B) types of montmorillonite. SEM results showed that as the clay content increased, larger agglomerates of clay were present. Nanocomposites with Cloisite 30B exhibited better dispersion and a lower degree of agglomeration than nanocomposites with Cloisite Na⁺. X‐ray results indicated that in nanocomposites with 3 wt % Cloisite 30B, d‐spacing expanded from 18.4 Å (the initial value of the pure clay) to 38.2 Å. The glass transition temperature increased from 73°C, in the unfilled epoxy resin, to 83.5°C in the nanocomposite with 9 wt % Cloisite 30B. The tensile strength exhibited a maximum at 1 wt % modified clay loading. Addition of 0.5 wt % organically modified clay improved the impact strength of the epoxy resin by 137%; in contrast, addition of 0.5 wt % unmodified clay improved the impact strength by 72%. Tensile modulus increased with increasing clay loading in both types of nanocomposites. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1081–1086, 2005     

潜伏性环氧树脂固化促进剂M-Cd的合成及其应用

采用间苯二胺和溴化镉合成了一种具有潜伏性的环氧树脂固化促进剂M－Cd它是一种络合物，将它应用于二氰二胺／环氧树脂脂固化体系的高温结构粘剂中，能够显著地降低粘剂的固化温度，缩短固化时间，本文还讨论了合成该促进剂主要成分的投料比，应用于二氰二胺／环氧树脂固化体系的高温结构胶粘剂中该促进剂的使用量以及固化条件对粘剂力学性能的影响，同时还考核了应用该促进剂M的高温结构胶粘剂的综合性能。     

Toughening of epoxy resins with aromatic polyesters

Polyesters, prepared by direct polycondensation from bisphenol A and aliphatic dicarboxylic acids [adipic acid (AD), suberic acid, sebacic acid (SE), and dodecanedioic acid], were used to improve the toughness of the diglycidyl ether of the bisphenol A/diaminodiphenyl methane epoxy system. Polyesters had the number average molecular weight (M_n) ranging from 4300 to 19,200 g/mole. The epoxy systems modified with the AD system (M_n = 6400 g/mole) and the SE system (M_n = 10,200 g/mole) showed phase separated structures with discrete domains of 0.2 μm, but other systems showed smooth fracture surfaces when observed by scanning electron microscopy. The modified epoxy systems except for the AD system and SE system showed two tan δ peaks corresponding to the α and β transitions of the epoxy resin. The modified epoxy systems showed maximum values of K_1c at around 10 wt % of polyester and maximum flexural properties at 5 wt % of polyester. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2464–2473, 2000