Long‐range‐ordered,hexagonally packed nanoporous membranes from degradable‐block‐containing diblock copolymer film templates

Polystyrene (PS)‐b‐polylactide (PLA) diblock copolymers with different molecular weights and fractions were synthesized through a combination of living anionic polymerization and controlled ring‐opening polymerization. Then, the PS–PLA films were guided to phase‐separate by self‐assembly into different morphologies through casting solvent selection, solvent evaporation, and thermal and solvent‐field regulation. Finally, perpendicularly oriented PS–PLA films were used as precursors for PS membranes with an ordered periodic nanoporous structure; this was achieved by the selective etching of the segregated PLA domains dispersed in a continuous matrix of PS. Testing techniques, including IR, ¹H‐NMR, gel permeation chromatography, scanning electron microscopy (SEM), and atomic force microscopy (AFM), were used to determine the chemical structure of the PS–PLA copolymer and its film morphology. AFM images of the self‐assembled PS‐PLA films indicate that vertical tapers of the PLA domains were generated among PS continuum when either toluene or tetrahydrofuran was used as the annealing solvent. The SEM images certified that the chemical etching of the PLA component from the self‐assembled PS–PLA films led to a long‐range‐ordered array of hexagonally packed nanoporous membranes with a diameter about 500 nm and a center‐to‐center distance of 1700 nm. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39638.     

Synthesis and characterization of polystyrene/poly(4‐vinylpyridine) triblock copolymers by reversible addition–fragmentation chain transfer polymerization and their self‐assembled aggregates in water

Reversible addition–fragmentation chain transfer polymerization (RAFT) was developed for the controlled preparation of polystyrene (PS)/poly(4‐vinylpyridine) (P4VP) triblock copolymers. First, PS and P4VP homopolymers were prepared using dibenzyl trithiocarbonate as the chain transfer agent (CTA). Then, PS‐b‐P4VP‐b‐PS and P4VP‐b‐PS‐b‐P4VP triblock copolymers were synthesized using as macro‐CTA the obtained homopolymers PS and P4VP, respectively. The synthesized polymers had relatively narrower molecular weight distributions (M_w/M_n < 1.25), and the polymerization was controlled/living. Furthermore, the polymerization rate appeared to be lower when styrene was polymerized using P4VP as the macro‐CTA, compared with polymerizing 4‐vinylpyridine using PS as the macro‐CTA. This was attributed to the different transfer constants of the P4VP and PS macro‐CTAs to the styrene and the 4‐vinylpyridine, respectively. The aggregates of the triblock copolymers with different compositions and chain architectures in water also were investigated, and the results are presented. Reducing the P4VP block length and keeping the PS block constant favored the formation of rod aggregates. Moreover, the chain architecture in which the P4VP block was in the middle of the copolymer chain was rather favorable to the rod assembly because of the entropic penalty associated with the looping of the middle‐block P4VP to form the aggregate corona and tailing of the end‐block PS into the core of the aggregates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1017–1025, 2003     

Synthesis and microphase separation of polystyrene‐b‐polylactide block copolymers aimed at preparation of ordered nanoparticle/block copolymer hybrid materials

A new nanoparticle/block copolymer (NP/BCP) hybrid material combining the unique properties of BCP poly(styrene)‐b‐poly(d ‐lactide) (PS‐b‐PDLA) and inorganic NP quantum dots CdSe was developed. A systematic study on the microphase separation of a series of PS‐b‐PDLAs by small‐angle X‐ray scattering showed that the degree of order of the separated microdomains depended on the initial state of the BCP and the measurement temperature and can be improved through isothermal crystallization of PDLA, thermal annealing and shear field etc. Incorporating a small amount of NPs into the BCP matrix can improve the mobility of the polymer chains and thus promote self‐assembly of the BCP, which leads to hierarchically ordered structures. Excess NPs, however, cannot be completely incorporated into the PDLA domains, resulting in the phase transformation of the BCP, destruction of the ordered structure and even macroscopic phase separation due to the aggregation of NPs. An important observation is that stereocomplexation between PDLA and poly(l ‐lactide) could provide a driving force to promote microphase separation of the BCP. The strategy presented in the current work has potential applications for developing highly ordered NP/BCP hybrid materials. © 2014 Society of Chemical Industry     

Preparation and morphology of amphiphilic polystyrene–poly (2‐vinylpyridine) heteroarm star copolymers prepared by ATRP

BACKGROUND: The self‐assembly of amphiphilic copolymers has been demonstrated to be a powerful route towards supramolecular objects with novel architectures, functions and physical properties. In this study, the synthesis and morphology of amphiphilic linear polystyrene (PS)‐block‐poly(2‐vinylpyridine) (P2VP) and heteroarm star PS‐star‐P2VP copolymers are studied. The dispersion of silver nanoparticles with the prepared PS‐block‐P2VP and PS‐star‐P2VP copolymers is also discussed. RESULTS: Amphiphilic copolymers with different P2VP chain lengths were successfully synthesized using atom transfer radical polymerization (ATRP). The copolymers prepared had low polydispersity indices. Various aggregate morphologies, including spheres, vesicles, rods, large compound micelles, two‐dimensional ring‐like and three‐dimensional hollow structures, were formed by varying the hydrophilic coil length and the selective solvent content. Silver nanoparticles showed good dispersion behavior in both types of copolymers. CONCLUSION: Based on this study, it will be possible to prepare metal/copolymer nanocomposites by direct mixing. Further, the PS‐block‐P2VP and PS‐star‐P2VP copolymers prepared can be used in the preparation of nanoporous films as templates and nanoparticles as nanoreactors. They can also be applied in terms of oil recovery, paints and cosmetics formulations, as well as in pharmaceutical and medical applications as rheological agents. Copyright © 2008 Society of Chemical Industry     

Amphiphilic block copolymer poly(lactic acid)‐block‐(glycidylazide polymer)‐block‐polystyrene: synthesis and self‐assembly

The triblock energetic copolymer poly(lactic acid)‐block‐(glycidylazide polymer)‐block‐polystyrene (PLA‐b‐GAP‐b‐PS) was synthesized successfully through atom‐transfer radical polymerization (ATRP) of styrene and ring‐opening polymerization of d,l ‐lactide. The energetic macroinitiator GAP‐Br, which was made from reacting equimolar GAP with α‐bromoisobutyryl bromide, firstly triggered the ATRP of styrene with its bromide group, and then the hydroxyl group on the GAP end of the resulting diblock copolymer participated in the polymerization of lactide in the presence of stannous octoate. The triblock copolymer PLA‐b‐GAP‐b‐PS had a narrow distribution of molecular weight. In the copolymer, the PS block was solvophilic in toluene and improved the stability of the structure, the PLA block was solvophobic in toluene and served as the sacrificial component for the preparation of porous materials, and GAP was the basic and energetic material. The three blocks of the copolymer were fundamentally thermodynamically immiscible, which led to the self‐assembly of the block copolymer in solution. Further studies showed that the concentration and solubility of the copolymer and the polarity of the solvent affected the morphology and size of the micelles generated from the self‐assembly of PLA‐b‐GAP‐b‐PS. The micelles generated in organic solvents at 10 mg mL^?1 copolymer concentration were spherical but became irregular when water was used as a co‐solvent. The spherical micelles self‐assembled in toluene had three distinct layers, with the diameter of the micelles increasing from 60 to 250 nm as the concentration of the copolymer increased from 5 to 15 mg L^?1. © 2017 Society of Chemical Industry     

Preparation,characterization, and thermal properties of polystyrene‐block‐quaternized poly(4‐vinylpyridine)/Montmorillonite nanocomposites

Polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) was synthesized by two steps of reversible addition‐fragmentation transfer (RAFT) polymerization of styrene (St) and 4‐vinylpyridine (4VP) successively. After P4VP block was quaternized with CH₃I, PS‐b‐quaternized P4VP/montmorillonite (PS‐b‐QP4VP/MMT) nanocomposites were prepared by cationic exchange reactions of quaternary ammonium ion in the PS‐b‐QP4VP with ions in MMT. The results obtained from X‐ray diffraction (XRD) and transmission electron microscopy (TEM) images demonstrate that the block copolymer/MMT nanocomposites are of intercalated and exfoliated structures, and also a small amount of silicates' layers remained in the original structure; differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) results show that the nanocomposites displayed higher glass transition temperature (T_g) and higher thermal stability than that of the corresponding copolymers. The blending of PS‐b‐QP4VP/MMT with commercial PS makes MMT to be further separated, and the MMT was homogeneously dispersed in the polymer matrix. The enhancement of thermal stability of PS/PS‐b‐QP4VP/MMT is about 20°C in comparison with commercial PS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1950–1958, 2006     

Nanophase morphology and crystallization in poly(vinylidene fluoride)/polydimethylsiloxane‐block‐poly(methyl methacrylate)‐block‐polystyrene blends

An approach to achieve confined crystallization of ferroelectric semicrystalline poly(vinylidene fluoride) (PVDF) was investigated. A novel polydimethylsiloxane‐block‐poly(methyl methacrylate)‐block‐polystyrene (PDMS‐b‐PMMA‐b‐PS) triblock copolymer was synthesized by the atom‐transfer radical polymerization method and blended with PVDF. Miscibility, crystallization and morphology of the PVDF/PDMS‐b‐PMMA‐b‐PS blends were studied within the whole range of concentration. In this A‐b‐B‐b‐C/D type of triblock copolymer/homopolymer system, crystallizable PVDF (D) and PMMA (B) middle block are miscible because of specific intermolecular interactions while A block (PDMS) and C block (PS) are immiscible with PVDF. Nanostructured morphology is formed via self‐assembly, displaying a variety of phase structures and semicrystalline morphologies. Crystallization at 145 °C reveals that both α and β crystalline phases of PVDF are present in PVDF/PDMS‐b‐PMMA‐b‐PS blends. Incorporation of the triblock copolymer decreases the degree of crystallization and enhances the proportion of β to α phase of semicrystalline PVDF. Introduction of PDMS‐b‐PMMA‐b‐PS triblock copolymer to PVDF makes the crystalline structures compact and confines the crystal size. Moreover, small‐angle X‐ray scattering results indicate that the immiscible PDMS as a soft block and PS as a hard block are localized in PVDF crystalline structures. © 2019 Society of Chemical Industry     

Flexible conductive poly(styrene‐butadiene‐styrene)/carbon nanotubes nanocomposites: Self‐assembly and broadband electrical behavior

Flexible conductive nanocomposites with the ability of self‐assembly into well‐ordered structures are promising multifunctional materials for energy conversion and storage devices. In this work, flexible nanocomposites based on multi‐walled carbon nanotubes (MWCNTs) and poly(styrene‐butadiene‐styrene) (SBS) were obtained by solution casting, followed by a post‐annealing treatment, during 7 days at 110 °C, to enable the self‐organization of the SBS. The impact of the MWCNTs on the self‐assembly was studied by atomic force microscopy and Small angle X‐rays scattering, and the conductivity of these nanocomposites was analyzed over the broadband frequency range, that is, 10^?1–10⁶ Hz. The results revealed that the lower MWCNTs loadings (～0.2 v %) were the most suitable to achieve a conductive network through the SBS, maintaining self‐assembled domains. These domains include hexagonally packed cylinders and alternating lamellae. Furthermore, at loadings above 1 v %, the impact of further MWCNTs addition on the conductivity was marginal over the whole frequency range and the self‐assembly tendency was progressively reduced. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46650.     

Synthesis of new ionic crosslinked polymer hydrogel combining polystyrene and poly(4‐vinyl pyridine) and its self‐healing through a reshuffling reaction of the trithiocarbonate moiety under irradiation of ultraviolet light

A new ionic crosslinked polymer hydrogel was achieved by the strategy of ionically crosslinking α,ω‐dibromide terminated polystyrene (Br‐PS‐Br) with poly(4‐vinyl pyridine) (P4VP) which was synthesized by reversible addition‐fragmentation chain transfer polymerization using a chain transfer agent containing a trithiocarbonate moiety. The moiety of trithiocarbonate was introduced into the crosslinked network to show the self‐healing characteristics. The chain structure and components of Br‐PS‐Br and P4VP were characterized through ¹H NMR, gel permeation chromatography, Fourier transform IR spectroscopy and elemental analysis. The P4VP (M_n = 25 300 g mol^?1) chains were crosslinked with Br‐PS‐Br (M_n = 2000 g mol^?1) through the quaternization reaction to form a polymer network which was further crosslinked in acetonitrile by irradiation of UV light to fabricate a hydrogel. Such a hydrogel of P4VP/Br‐PS‐Br cut by a razor blade can be rapidly (1 h) and repeatedly (three times) healed through a reshuffling reaction of the trithiocarbonate moiety under irradiation by UV light. © 2018 Society of Chemical Industry     

Tunable morphology and photoluminescence of poly(styrene‐block‐4‐vinylpyridine)–cadmium sulfide nanocomposites

Poly(styrene‐block‐4‐vinylpyridine) (PS4VP)–CdS nanocomposites containing different concentrations of CdS were synthesized by an in situ method. Scanning electron microscopy and transmission electron microscopy results indicate that the morphologies of PS4VP–Cd(II) and PS4VP–CdS were controlled by the Cd(II) concentration and the solvent, respectively. The effects of the CdS concentration on the crystal style of CdS in PS4VP–CdS and the photoluminescence (PL) properties of the PS4VP–CdS were also examined. By a comparison of the PL spectra of PS4VP–CdS in solutions, films, and powders, the PL mechanism of PS4VP–CdS was also delivered. The PS4VP–CdS nanocomposite shows potential for application in water‐soluble fluorescence probes. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Efficiency above 6% in poly(3‐hexylthiophene):phenyl‐C‐butyric acid methyl ester photovoltaics via simultaneous addition of poly(3‐hexylthiophene) based grafted graphene nanosheets and hydrophobic block copolymers

A combination of reduced graphene oxide (rGO) nanosheets grafted with regioregular poly(3‐hexylthiophene) (P3HT) (rGO‐g‐P3HT) and P3HT‐b‐polystyrene (PS) block copolymers was utilized to modify the morphology of P3HT:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) active layers in photovoltaic devices. Efficiencies greater than 6% were acquired after a mild thermal annealing. To this end, the assembling of P3HT homopolymers and P3HT‐b‐PS block copolymers onto rGO‐g‐P3HT nanosheets was investigated, showing that the copolymers were assembled from the P3HT side onto the rGO‐g‐P3HT nanosheets. Assembling of P3HT‐b‐PS block copolymers onto the rGO‐g‐P3HT nanosheets developed the net hole and electron highways for charge transport, thereby in addition to photoluminescence quenching the charge mobility (μ_h and μ_e) values increased considerably. The best charge mobilities were acquired for the P3HT₅₀₀₀₀:PC71BM:rGO‐g‐P3HT₅₀₀₀₀:P3HT₇₀₀₀‐b‐PS₁₀₀₀ system (μ_h = 1.9 × 10^?5 cm² V^–1 s^–1 and μ_e = 0.8 × 10^?4 cm² V^–1 s^–1). Thermal annealing conducted at 120 °C also further increased the hole and electron mobilities to 9.8 × 10^?4 and 2.7 × 10^?3 cm² V^–1 s^–1, respectively. The thermal annealing acted as a driving force for better assembly of the P3HT‐b‐PS copolymers onto the rGO‐g‐P3HT nanosheets. This phenomenon improved the short circuit current density, fill factor, open circuit voltage and power conversion efficiency parameters from 11.13 mA cm^?2, 0.63 V, 62% and 4.35% to 12.98 mA cm^?2, 0.69 V, 68% and 6.09%, respectively. © 2019 Society of Chemical Industry     

Two‐dimensional regular nanopatterning on block copolymer substrate having lamellar morphology using star‐hyperbranched nanospheres by electrostatic interaction

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate as an inimer under UV irradiation. The star‐hyperbranched copolymers were derived by grafting from surface N,N‐diethyldithiocarbamate groups of hyperbranched macroinitiator with t‐butyl methacrylate in the presence of N,N‐tetraethylthiuram disulfide. We obtained poly(methacrylic acid) star‐hyperbranched PS nanospheres by hydrolysis of poly(t‐butyl methacrylate)‐grafted chains. We established two‐dimensional (2D) regular nanopatterning by aligning continuously such nanospheres on poly(2‐vinylpyridine) (P2VP) lamellar layers of PS‐block‐P2VP diblock copolymer film. Electrostatic interaction between nanosphere surface having negative charges (? COOCs) and P2VP lamellar layer acted effectively for the 2D nanopattern formation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4206–4210, 2006     

Acid‐induced morphological transition of block copolymer brush adsorbed on mica surface

The morphology and morphological transformation of polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) brushes on mica surfaces have been investigated. PS‐b‐P4VP brushes were adsorbed onto mica surfaces when dip‐coated from dilute solutions because of the strong polar adhesive interaction between the mica surface and the 4VP segments. Porous, bicontinuous layers and isolated clusters were obtained, depending on the concentration of the copolymer solution. These brushes can respond to the acid treatment, adopting elongated conformation. As a result, the relative height of the brushes increased and the lateral dimension decreased. Copyright © 2005 Society of Chemical Industry     

Preparation and self‐assembly of poly(diglycidyl maleate‐co‐stearyl methacrylate)

Poly(diglycidyl maleate‐co‐stearyl methacrylate) (P(DGMA‐co‐SMA)) with reactive epoxy groups was synthesized by reaction of poly(maleic anhydride‐co‐stearyl methacrylate) (P(MA‐co‐SMA)) and epichlorohydrin. The effect of precipitant on self‐assembly behaviors of the resultant copolymer was investigated. It was found that vesicles and nanotubule liked aggregates can be obtained through self‐assembly of P(DGMA‐co‐SMA) in THF solution using CH₃CH₂OH (EtOH) as precipitant while spheral aggregates can be obtained using H₂O as precipitant. The mechanism of the self‐assembly behavior was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Highly efficient adsorbent for organic dyes based on a temperature‐ and pH‐responsive multiblock polymer

The self‐assembly behavior of amphiphilic block copolymers in selective solutions has many applications in environmentally responsive polymer materials. In this article, we report on a new amphiphilic, temperature and pH dual‐responsive poly[2‐dimethylaminoethyl methacrylate‐co‐(methyl methacrylate)]‐b‐poly[poly(ethylene glycol) methacrylate] [P(DMAEMA‐co‐MMA)‐b‐PPEGMA], which was synthesized via reversible addition–fragmentation chain‐transfer polymerization. The structure, self‐assembly behaviors, and process of organic dye adsorption were characterized by ¹H‐NMR, ultraviolet–visible absorbance spectroscopy, and DLS measurements. P(DMAEMA‐co‐MMA)‐b‐PPEGMA was proven to be an outstanding adsorbent with excellent reversibility. Methyl red was released from the micelles as the pH value of the solution was adjusted to 4, and it could also be encapsulated again when the pH value was adjusted to 7.4 because of the sensitive pH‐responsive ability. It is promising that the triblock polymer had a positive effect on dye adsorption for environmental protection. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46626.     

Polystyrene‐block‐polylactide obtained by the combination of atom transfer radical polymerization and ring‐opening polymerization with a commercial dual initiator

A polystyrene (PS)‐b‐polylactide (PLA) block copolymer was prepared from the combination of atom transfer radical polymerization and ring‐opening polymerization with commercially available 2,2,2‐tribromoethanol as a dual initiator in a sequential two‐step procedure. Hydroxyl‐terminated polystyrene (PS‐OH)s with various molecular weights were first prepared with polydispersity indices lower than 1.3; these provided valuable macroinitiators for the polymerization of D,L ‐lactide. A block copolymer with a composition allowing the formation of hexagonally packed PLA cylinders in a PS matrix was then obtained. The PS‐b‐PLA thin films revealed, after vapor solvent annealing, a hexagonally packed organization of the PLA cylinders, which was oriented perpendicularly to the surface of the film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Triblock copolymers of methyl methacrylate/N‐vinyl pyrrolidone and their hydrophilication effects on poly(vinylidene fluoride) porous membranes

The new amphiphilic triblock copolymers of poly(N‐vinyl pyrrolidone‐b‐methyl methacrylate‐b‐N‐vinyl pyrrolidone) (P(VP‐b‐MMA‐b‐VP)) were synthesized via a reversible addition fragmentation chain transfer polymerization route. Using these copolymers as additives in casting solutions, the porous blend membranes of poly (vinylidene fluoride) and P(VP‐b‐MMA‐b‐VP) were prepared following a typical nonsolvent induced phase separation process. The influences of P(VP‐b‐MMA‐b‐VP) on the morphologies of the blend membranes were observed by scanning electron microscopy. The chemical compositions in membrane surface layers were measured by X‐ray photoelectron measurement. Water contact angle and water flux experiments were used to evaluate the hydrophilicity and permeation properties of the blend membranes. It was found that the P(VP‐b‐MMA‐b‐VP) copolymers could be retained in membrane stably in membrane formation and application process. The copolymers could enrich in surface layer and endowed the blend membrane with efficient hydrophilicity and higher water permeation flux. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of double‐hydrophilic poly(methylacrylic acid)–poly(ethylene glycol)–poly(methylacrylic acid) triblock copolymers and their micelle formation

The aim of the work reported was to synthesize a series of double‐hydrophilic poly(methacrylic acid)‐block‐poly(ethylene glycol)‐block‐poly(methacrylic acid) (PMAA‐b‐PEG‐b‐PMAA) triblock copolymers and to study their self‐assembly behavior. These copolymeric self‐assembly systems are expected to be potential candidates for applications as carriers of hydrophilic drugs. Bromo‐terminated difunctional PEG macroinitiators were used to synthesize well‐defined triblock copolymers of poly(tert‐butyl methacrylate)‐block‐poly(ethylene glycol)‐block‐poly(tert‐butyl methacrylate) via reversible‐deactivation radical polymerization. After the removal of the tert‐butyl group by hydrolysis, double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers were obtained. pH‐sensitive spherical micelles with a core–corona structure were fabricated by self‐assembly of the double‐hydrophilic PMAA‐b‐PEG‐b‐PMAA triblock copolymers at lower solution pH. Transmission electron microscopy and laser light scattering studies showed the micelles were of nanometric scale with narrow size distribution. Solution pH and micelle concentration strongly influenced the hydrodynamic radius of the spherical micelles (48–310 nm). A possible reason for the formation of the micelles is proposed. Copyright © 2010 Society of Chemical Industry     

Morphology of poly(styrene‐block‐dimethylsiloxane) copolymer films

The morphologies of poly(styrene‐block‐di‐methylsiloxane) (PS‐b‐PDMS) copolymer thin films were analyzed via atomic force microscopy and transition electron microscopy (TEM). The asymmetric copolymer thin films spin‐cast from toluene onto mica presented meshlike structures, which were different from the spherical structures from TEM measurements. The annealing temperature affected the surface morphology of the PS‐b‐PDMS copolymer thin films; the polydimethylsiloxane (PDMS) phases at the surface were increased when the annealing temperature was higher than the PDMS glass‐transition temperature. The morphologies of the PS‐b‐PDMS copolymer thin films were different from solvent to solvent; for thin films spin‐cast from toluene, the polystyrene (PS) phase appeared as pits in the PDMS matrix, whereas the thin films spin‐cast from cyclohexane solutions exhibited an islandlike structure and small, separated PS phases as protrusions over the macroscopically flat surface. The microphase structure of the PS‐b‐PDMS copolymer thin films was also strongly influenced by the different substrates; for an asymmetric block copolymer thin film, the PDMS and PS phases on a silicon substrate presented a lamellar structure parallel to the surface at intervals. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1010–1018, 2007     

Synthesis of polydimethylsiloxane‐block‐polystyrene‐block‐polydimethylsiloxane via polysiloxane‐based macroinitiator in supercritical CO2

Polydimethylsiloxane‐block‐polystyrene‐block‐polydimethylsiloxane (PDMS‐b‐PS‐b‐PDMS) was synthesized by the radical polymerization of styrene using a polydimethylsiloxane‐based macroazoinitiator (PDMS MAI) in supercritical CO₂. PDMS MAI was synthesized by reacting hydroxy‐terminated PDMS and 4,4′‐azobis(4‐cyanopentanoyl chloride) (ACPC) having a thermodegradable azo‐linkage at room temperature. The polymerization of styrene initiated by PDMS MAI was investigated in a batch system using supercritical CO₂ as the reaction medium. PDMS MAI was found to behave as a polyazoinitiator for radical block copolymerization of styrene, but not as a surfactant. The response surface methodology was used to design the experiments. The parameters used were pressure, temperature, PDMS MAI concentration and reaction time. These parameters were investigated at three levels (?1, 0 and 1). The dependent variable was taken as the polymerization yield of styrene. PDMS MAI and PDMS‐b‐PS‐b‐PDMS copolymers obtained were characterized by proton nuclear magnetic resonance and infrared spectroscopy. The number‐ and weight‐average molecular weights of block copolymers were determined by gel permeation chromatography. Copyright © 2004 Society of Chemical Industry