Comparative removal of two textile dyes from aqueous solution by adsorption onto marine-source waste shell: Kinetic and isotherm studies

Scallop shell was used as a low-cost adsorbent for removal of two anionic textile dyes, Reactive Blue 19 (RB19) and Acid Cyanine 5 R (AC5R), from aqueous solutions. The adsorbent was characterized using inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The dye removal efficiency of scallop shell was determined as function of contact time, solution pH, initial dye concentration and adsorbent dosage. With increasing dye concentration, the adsorption of both dyes decreased, while it increased with increasing adsorbent dosage. Optimum removal of RB19 and AC5R was achieved at pH=6. Adsorption equilibrium data were well described by the Freundlich model. The maximum dye adsorption capacity of scallop shell as estimated from the Langmuir isotherm was 12.36 and 12.47 mg/g for RB19 and AC5R, respectively. The adsorption kinetic data showed excellent correlation with the pseudosecond-order model. It was concluded that scallop shell has a remarkable potential for the sorption of RB19 and AC5R and can be used for treatment of the dye contaminated wastewater.     

Competitive adsorption of Direct Yellow 12 and Reactive Orange 12 on ZnS:Mn nanoparticles loaded on activated carbon as novel adsorbent

A novel adsorbent (ZnS:Mn nanoparticles loaded on activated carbon) was made. The competitive adsorption of Direct Yellow 12 (DY12) and Reactive Orange 12 (RO12) dyes in binary mixture onto this adsorbent was studied. DY12 and RO12 with severe spectra overlapping were chosen and analyzed simultaneously with high accuracy by first order derivative spectrophotometric method in binary solutions. The effect of multi-solute systems on the adsorption capacity was investigated. Because of the specific characteristics of ZnS:Mn-NP-AC was found to be efficient for the removal of the dyes studied. The adsorption capacities were investigated and described by the mono- and multi-component Langmuir and Freundlich isotherm models for both single and binary dye solutions. The isotherm constants for DY12 and RO12 were calculated. For single solution of DY12 and RO12 dyes, the adsorption capacities of the applied adsorbent were found to be 90.05 mg/g and 94.52 mg/g, respectively. Equilibrium uptake amounts of DY12 and RO12 in binary solution onto the applied adsorbent were found to be considerably decreasing with increasing the concentrations of the other dye. A better agreement between the adsorption equilibrium data and mono-component Langmuir isotherm model was found. However, at concentrations within moderate ranges, the extended Freundlich isotherm model satisfactorily predicted multi-component adsorption equilibrium data. An endothermic and a spontaneous nature for the adsorption of the dyes studied were shown from thermodynamic parameters.     

荔枝皮吸附水中孔雀绿的响应曲面法研究

采用Box-Behnken响应曲面优化设计对荔枝皮吸附去除水中染料孔雀绿（MG）的影响因素（如吸附时间、吸附剂用量、pH值）进行研究,建立了去除率和上述因素之间的二次多项式模型,得到荔枝皮吸附孔雀绿的最佳吸附条件为：温度25℃、吸附时间122.31min、吸附剂用量2.81g/L、pH=6.75、MG浓度为100mg/L,最优条件下荔枝皮对孔雀绿的吸附去除率可以达99.75%。用Langmuir和Freundlich方程对吸附等温线进行拟合,其中Langmuir方程拟合效果最好,其最大吸附量为142.86mg/g,且吸附过程符合假二次动力学模型。此外,热力学结果表明,荔枝皮对孔雀绿的吸附属于自发的吸热过程。结合吸附-解吸循环实验和对吸附的FT-IR表征,表明荔枝皮是一种极具潜力的高效的吸附剂,能有效去除水中的孔雀绿离子。     

Adsorption of anionic dyes on poly(epicholorohydrin dimethylamine) modified bentonite in single and mixed dye solutions

The performance of poly(epicholorohydrin dimethylamine) modified bentonite (EPIDMA/bentonite) as an adsorbent to remove anionic dyes, namely Direct Fast Scarlet, Eosin Y and Reactive Violet K-3R, was investigated in single, binary and ternary dye systems. In adsorption experiments in single dye solutions, the adsorption of the three dyes onto EPIDMA/bentonite was described by the Langmuir isotherm model and the pseudo-second-order kinetic model. At low dosage of EPIDMA/bentonite, preferential adsorption was observed for the dye with higher affinity to the adsorbent in mixed dye systems. The reduction in uptake of the dye with increasing equilibrium dye concentration in the isotherm and desorption in the kinetic curves were observed for the dye with lower affinity. The total amount of dyes adsorbed versus the total equilibrium dye concentrations were fitted well by the Langmuir isotherm model. The kinetics of the total adsorbed amount of dyes followed the pseudo-second-order kinetic model. The effect of the dosage of adsorbent on color removal efficiency, residual color distribution and adsorption kinetics was investigated.     

Removal of Selected Basic Dyes using Activated Carbon from Tannery Wastes

Activated carbon prepared from tannery leather waste (TLW-AC) has been studied for its efficiency of removal of basic dyes, namely rhodamine B (RB), methylene blue (MB), and malachite green (MG) from aqueous solutions. Factors influencing dye adsorption such as the concentration of dye, pH, contact time, and temperature were investigated. The adsorption was found to be strongly dependent on the pH and temperature. The maximum sorption capacity of RB was obtained at pH 3 and for MB and MG was obtained at pH 11. Various thermodynamic parameters such as ΔG°, ΔH°, and ΔS° were calculated. The kinetic studies reveal that the adsorption process follows the pseudo second-order kinetic model. The equilibrium data have been well-described by the Langmuir and Freundlich models, and the data fitted well in both model equations. The study revealed that wastes from leather industry is an economically viable option for dye removal.     

Efficient removal of cationic dyes from aqueous solutions using a modified poly(ethylene terephthalate) fibers adsorbent

ABSTRACT

A novel adsorbent was synthesized through functionalization of glycidyl methacrylate-g-poly(ethylene terephthalate) (GMA-g-PET) fibers with iminodiacetic acid (IDA) to give IDA-GMA-g-PET fibers. This adsorbent was then exploited for the removal of Malachite Green (MG) and Rhodamine B (RB) dyes. MG has shown faster adsorption kinetics and equilibrium was attained in 15 mins. and 90 mins. for MG and RB, respectively. IDA-GMA-g-PET fibers showed 100% removal efficiency for MG and RB dyes from the solutions having initial concentrations of 300 mg L^?1and 200 mg L^?1, respectively. Desorption conditions of dyes and reusability of the fibers were also investigated.     

Application of mesoporous magnetic carbon composite for reactive dyes removal: Process optimization using response surface methodology

Discharging the effluents of textile wastewaters into potable water resources can endanger the ecosystem, due to their reactivity, toxicity, and chemical stability. In this research, the application of powder activated carbon modified with magnetite nanoparticles (PAC-MNPs) as an adsorbent for removal of reactive dyes (Reactive black 5 (RB5) and reactive red 120 (RR120)) was studied in a batch system. The adsorption performance was evaluated as a function of temperature, contact time and different adsorbent and adsorbate concentrations. The levels of factors were statistically optimized using Box-Behnken Design (BBD) from the response surface methodology (RSM) to maximize the efficiency of the system. The adsorption process of both dyes was fit with the pseudo-second order kinetic and Langmuir isotherm models. The identified optimum conditions of adsorption were 38.7 °C, 46.3 min, 0.8 g/L and 102 mg/L for temperature, contact time, adsorbent dose, and initial dyes concentration, respectively. According to the Langmuir isotherm, the maximum sorption capacities of 175.4 and 172.4 mg/g were obtained for RB5 and RR120, respectively. Thermodynamics studies indicated that the adsorption process of the reactive dyes was spontaneous, feasible, and endothermic. After five cycles, the adsorption efficiency was around 84 and 83% for RB5 and RR120, respectively. A high value of desorption was achieved, suggesting that the PAC-MNPs have a good potential in regeneration and reusability, and also can be effectively utilized in industrial applications. PAC-MNPs also show a good anti-interference potential for removal of reactive dyes in dye-industry wastewaters.     

Adsorption of cationic dyes from aqueous solution using hydrophilic silica aerogel via ambient pressure drying

In order to remove the organic dyes of textile waste water, the silica aerogel was successfully prepared by using E-40 as a novel precursor and then dried in ambient pressure. The synthesized sample was verified by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). After calcining, the hydrophilic silica aerogel (HSA) was used as adsorbent to remove Methylene Blue (MB), Malachite Green (MG), and Gentian Violet (GV) from aqueous solution. The effects of initial concentration of dyes and adsorbent dosage on the adsorption process were examined. It was found that HSA showed excellent adsorption capacities, the maximum percentage of removal dyes could reach 98%. Herein, the Langmuir, Freundlich and de Boer-Zwikker isotherm modes were employed to discuss the adsorption behavior. The results indicated that the de Boer-Zwikker model can effectively describe the adsorption behavior. Besides, the HSA could be utilized as the recyclable adsorbent in degradation experiment, after five cycles, no obvious loss of adsorption capacity was found. As an efficient, low-cost, environmental friendly and recyclable adsorbent, silica aerogel is expected to be used for dyes removal.     

Adsorption of cationic dyes from aqueous solution using hydrophilic silica aerogel via ambient pressure drying

In order to remove the organic dyes of textile waste water, the silica aerogel was successfully prepared by using E-40 as a novel precursor and then dried in ambient pressure. The synthesized sample was verified by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR). After calcining, the hydrophilic silica aerogel (HSA) was used as adsorbent to remove Methylene Blue (MB), Malachite Green (MG), and Gentian Violet (GV) from aqueous solution. The effects of initial concentration of dyes and adsorbent dosage on the adsorption process were examined. It was found that HSA showed excellent adsorption capacities, the maximum percentage of removal dyes could reach 98%. Herein, the Langmuir, Freundlich and de Boer-Zwikker isotherm modes were employed to discuss the adsorption behavior. The results indicated that the de Boer–Zwikker model can effectively describe the adsorption behavior. Besides, the HSA could be utilized as the recyclable adsorbent in degradation experiment, after five cycles, no obvious loss of adsorption capacity was found. As an efficient, low-cost, environmental friendly and recyclable adsorbent, silica aerogel is expected to be used for dyes removal.     

Chemically modified organic/inorganic nanoporous composite particles for the adsorption of reactive black 5 from aqueous solution

In the present work, we report a chemically modified polyacrylamide/silica nanoporous composite adsorbent for the removal of reactive black 5 (RB5) azo dye from aqueous solutions. The composite adsorbent was synthesized in a packed bed and modified by ethylenediamine (EDA). The adsorbent was characterized by Fourier transformation infrared (FT-IR), thermogravimetric analysis (TGA), thermoporometry, Brunauer, Emmett and Teller (BET) method and scanning electron microscopy (SEM). Mechanical stability of the adsorbent was examined in a packed bed by following the back-pressure of the column. Pore diameter of the composite adsorbent in dry and wet states was estimated to be about 18.71 nm and 12.61 nm, respectively. Adsorption experiments were performed in batch mode and effect of various operational parameters on the adsorption capability of the adsorbent was studied systematically. The maximum adsorption capacity of the modified composites was found to be 454.5 mg RB5/g of adsorbent. The equilibrium data were analyzed by Langmuir, Freundlich, Sips, BET and Redlich–Peterson isotherm models and found to fit well to the BET isotherm. The data kinetically followed the pseudo-second-order model. High adsorption capacity, fast removal mechanism, and good mechanical stability are three advantages of the presented composite for the removal of RB5.     

The use of toxic solid waste for the adsorption of dyes from waste streams

The use of chromium‐containing toxic solid wastes from the leather industry for the removal of dyes from waste‐waters has been studied. A batch adsorption model has been employed and the role of various experimental parameters on the efficiency of the process evaluated. The extent of dye removal was studied by varying parameters such as pH, contact time, initial concentration of the dye and amount of adsorbent. The experimental equilibrium data for this system has been analyzed using the linearized forms of Langmuir and Freundlich isotherms. The Langmuir isotherm was found to provide the best theoretical correlation of the experimental data and the adsorption was found to follow pseudo‐second‐order kinetics. The dye adsorbed solid wastes were used for the preparation of pigments. In essence, this study provides a greener solution for chromium‐containing solid wastes, dye containing waste‐waters and dye‐adsorbed chromium solid wastes. Copyright © 2007 Society of Chemical Industry     

Coconut (Cocos nucifera) Shell Based Activated Carbon for the Removal of Malachite Green Dye from Aqueous Solutions

The adsorption of malachite green (MG) dye using coconut shell based activated carbon (CSAC) was investigated. Operational factors such as the effect of pH, initial dye concentration, adsorbent dosage, contact time, and solution temperature on the adsorption process were studied. Solution pH strongly affected the chemistry of both the dye molecule and CSAC in solution. Optimum dye removal was obtained at pH ≥ 8.0. Equilibrium was reached in 120 minutes contact time. The Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) isotherm models were used to evaluate the adsorption data. The adsorption data fitted the Langmuir model most with maximum adsorption monolayer coverage of 214.63 mg/g. Pseudo-first-order, pseudo second-order, and intraparticle diffusion models were also used to fit the experimental data. Kinetic parameters, rate constants, equilibrium sorption capacities, and related correlation coefficients, for each model were calculated and discussed. Thermodynamic parameters such as ΔG⁰, ΔH⁰, and ΔS⁰ were evaluated and it was found that the sorption process was feasible, spontaneous, and exothermic in nature. The mean free energy obtained from D-R isotherm suggests that the adsorption process follows physiosorption mechanism. The results showed that coconut shells could be employed as a low-cost precursor in activated carbon preparation for the removal of MG dye from wastewaters.     

Adsorption Studies of Methylene Blue and Malachite Green From Aqueous Solutions by Pretreated Lignocellulosic Materials

Lignocellullosic materials have been used as low-cost adsorbents for the removal of methylene blue (MB) and malachite green (MG) dyes from aqueous solutions. The organic compounds in the adsorbents that contribute to chemical oxygen demand (COD) have been removed through pretreatment of the adsorbents. The percentage of color removal and COD reduction of both MB and MG dyes were found relatively close in values. The adsorption process followed the Langmuir isotherm as well as the Freundlich isotherm and pseudo-second order kinetic model. The process was found to be endothermic in nature.     

Removal of basic dyes from aqueous solution by low-cost adsorbent: Wood apple shell (Feronia acidissima)

The adsorption of two basic dyes, methylene blue (MB) and crystal violet (CV) on wood apple shell (WAS) were investigated using a batch adsorption technique. A series of experiments were undertaken in an agitated batch adsorber to assess the effect of the system variables such as solution pH, dye concentration and temperature. Removal of dyes was observed to be most effective at higher pH. Freundlich and Langmuir isotherm models were applied to the equilibrium data. The results showed that Langmuir equation fits better than the Freundlich equation. It was observed that the WAS adsorbent showed higher adsorption capacity for crystal violet (130 mg/g) than methylene blue (95.2 mg/g). The FTIR studies indicate that the interaction of dye and WAS surface is via the nitrogen atoms of the adsorbate and oxygen groups of the adsorbent. The adsorption of dyes onto WAS proceeds according to a pseudo-second-order model. Thermodynamic parameters such as free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were also calculated. The studies show that WAS, a lignocellulosic inexpensive material, can be an alternative to other expensive adsorbents used for dye removal in wastewater treatment.     

乙酸膨润土对孔雀石绿的吸附去除

为提高膨润土对染料的吸附性能,制备了有机酸改性膨润土-乙酸膨润土(AAB).对AAB 进行了N₂-BET、FTIR 和XRD 表征分析,同时考察了影响乙酸膨润土(AAB)去除孔雀石绿(MG)的主要因素,并进行了吸附 动力学和吸附等温模型研究。研究结果表明,乙酸分子已成功负载在天然膨润土(RB)上,AAB 的比表面积为 45m2/g;层间距为1.721nm;在实验条件下,用0.4g/L 的吸附剂处理300mg/L 的MG,MG 的脱色率达到99%; pH 值为1～12 时,AAB 对MG 的脱色率均达到97%以上;低浓度的十二烷基苯磺酸钠(SDBS)能提高AAB 对MG 的去除率,而加入十六烷基三甲基溴化铵(CTAB)会产生很强的抑制作用;AAB 对MG 的吸附符合 Langmuir 模型,Langmuir 吸附容量高达1250mg/g;MG 在AAB 上的吸附先是一个快速吸附阶段,然后逐渐到 达吸附平衡,符合准二级动力学模型。总之,AAB 环保无毒,在MG 去除方面具有用量低、适应pH 值范围广、吸附容量大和吸附快速的优势。     

Adsorption Behavior of Organic Dyes in Biopolymers Impregnated with H3PO4: Thermodynamic and Equilibrium Studies

A lignocellulose‐based waste biopolymer was impregnated with phosphoric acid and used for the removal of two organic dyes, Direct Blue (DB) and Reactive Blue (RB), from aqueous solution. Batch adsorption kinetic studies were carried out at different initial concentrations of the dyes, at different temperatures and various initial pH values (2–10). The equilibrium data obeyed the Langmuir isotherm model with high regression coefficient. The kinetic data were also used to test three different kinetic models. The validity of the kinetic models was analyzed and the pseudo‐second‐order model may be the best fit to explain the rate‐determining step. Adsorption of both dyes follows chemisorption. The effective diffusion coefficient and the activation energy were also calculated at different temperatures to establish the mechanism. Thermodynamic studies suggest that the adsorption of DB and RB is highly endothermic in nature. Mass transfer analysis reveals that the adsorption of DB and RB occurs through a film diffusion mechanism. Based on the Langmuir isotherm equation, the single‐stage batch absorber design of the adsorption of DB and RB onto activated carbon was studied.     

Poly(methacrylic acid)‐modified chitosan for enhancement adsorption of water‐soluble cationic dyes

The preparation of poly(methacrylic acid)‐modified chitosan microspheres and its application for the removal of cationic dyes, methylene blue (MB) and malachite green (MG), in aqueous solution in a batch system were described. The modified chitosan was characterized using SEM, FTIR, and XPS analyses. The effects of the pH of the solution, contact time, and initial dye concentration were studied. The adsorption capacities of the microspheres for the two cationic dyes increased significantly after the modification because a large number of carboxyl groups were introduced. The equilibrium process was better described by the Langmuir than the Freundlich isotherm. According to the Langmuir equation, the maximum adsorption capacities were 1000.0 and 523.6 mg g^?1 for MB and MG, respectively. Kinetic studies showed better correlation coefficients for a pseudo‐second‐order kinetic model, confirming that the sorption rate was controlled by a chemisorption process. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

Facile preparation of agaraldehyde chitosan-based composite beads as effectual adsorbent especially towards amido black

Agaraldehyde and chitosan (CHI) functional beads as dye adsorbent were prepared under aqueous medium under ambient temperature and used for removing seven dyes from aqueous solutions. The resulting porous CHI-A_ald (R-A_ald-CHI) bio-beads were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscope. The dye removal efficiency was studied using seven dyes (amido black [AB], bromophenol blue, crystal violet, bismarck brown, cotton blue, methyl orange, methylene blue), but detail study was done on AB. AB adsorption was followed the Langmuir-isotherm and pseudo-second order kinetics. The effects of adsorption parameters were investigated, and maximum AB 1506 mg/g was adsorbed under the optimum conditions. The linear and nonlinear forms of Langmuir and Freundlich isotherms and two kinetic models pseudo-first-order and pseudo-second-order were studied. The results show that adsorption follow both isotherm model while for kinetics of adsorption follow pseudo-second-order. The results of this work showed that R-A_ald-CHI was encouraging adsorbent to remove dyes from wastewater, especially AB.     

Humic acid-immobilized polymer/bentonite composite as an adsorbent for the removal of copper(II) ions from aqueous solutions and electroplating industry wastewater

In this study, humic acid (HA) was immobilized onto amine-modified polyacrylamide/bentonite composite (Am-PAA-B) which was prepared by direct intercalation polymerization technique and the product (HA-Am-PAA-B) was used as an adsorbent for the removal of copper(II) ions from aqueous solutions. The surface characteristics of bentonite, Am-PAA-B and HA-Am-PAA-B were investigated. The adsorbent behaved like a cation exchanger and more than 99.0% Cu(II) ions’ removal was observed at the pH range 5.0–6.0. Kinetic and isotherm experiments showed that amount of Cu(II) ions adsorbed increases with increase of the initial concentration and temperature. The adsorption kinetic data were interpreted by pseudo-first-order and pseudo-second-order rate equations. The suitability of Langmuir, Freundlich and Dubinin–Radushkevich (D-R) adsorption models to the equilibrium data was investigated. The Langmuir isotherm was found to provide the best theoretical correlation of the experimental equilibrium data. The thermodynamic and kinetic activation parameters were derived to predict the nature of adsorption process and discussed in detail. The isosteric heat of adsorption was constant even after increase in surface loading. The removal efficiency of HA-Am-PAA-B was tested using electroplating industry wastewater. The desorption of adsorbed Cu(II) ions was achieved by 0.1 M HCl and four adsorption/desorption cycles were performed without significant decrease in the adsorption capacity.     

Preparation and application of glycidyl methacrylate and methacrylic acid monomer mixture‐grafted poly(ethylene terephthalate) fibers for removal of methylene blue from aqueous solution

A novel fibrous adsorbent that grafts glycidyl methacrylate (GMA) and methacrylic acid (MAA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers was used for removal of methylene blue (MB) in aqueous solutions by a batch equilibration technique. The operation parameters investigated included, pH of solution, removal time, graft yield, dye concentration, and reaction temperature. The adsorption rate of MB is much higher on the MAA/GMA‐grafted PET fibers than on the ungrafted PET fibers. MB was removed 99% the initial dye concentration at 10 mg L⁻¹ and 93% at 200 mg L⁻¹ by monomers mixture‐grafted PET fibers. Pseudofirst order and pseudosecond order kinetic equations were used to examine the experimental data of different graft yield. It was found that the pseudosecond order kinetic equation described the data of dye adsorption on fibrous adsorbent very well. The experimental isotherms data were analyzed using Langmuir and Freundlich isotherm models. The data was that Freundlich isotherm model fits the data very well for the dyes on the fibers adsorbent. The dye adsorbed was easily desorbed by treating with acetic acid/methanol mixture (50% V/V) at room temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010