Evaluation of a NOx Reduction System on an Engine Rig Under Stationary Operation

The NO _x storage and reduction approach was applied on a full-scale engine rig under stationary operation. NO _x reduction experiments were performed and a catalyst model developed and tested. The exhaust system was equipped with a bypass system. A NO _x reduction of 25–53% was achieved. At low temperature, higher values were reached when the exhaust gas bypass was longer than the injection period.     

Reduction of NOx Stored at Low Temperatures on a NOx Adsorbing Catalyst

Isothermal storage and reduction of NO₂ with CO, C₃H₆ and H₂ as reducing agents on a lean NO _x adsorber was investigated by temperature programmed desorption (TPD) and temperature programmed reduction (TPR) studies. The reduction of NO _x was clearly favoured with H₂ as reducing agent. Carbon monoxide and C₃H₆ showed fairly low reduction of NO _x . The NO _x reduction at low temperatures with H₂ as reducing agent was found to be effective, clearly much more effective than for CO.     

Dynamics and selectivity of NOx reduction in NOx storage catalytic monolith

Several nitrogen compounds can be produced during the regeneration phase in periodically operated NO_x storage and reduction catalyst (NSRC) for conversion of automobile exhaust gases. Besides the main product N₂, also NO, N₂O, and NH₃ can be formed, depending on the regeneration phase length, temperature, and gas composition. This contribution focuses on experimental evaluation of the NO_x reduction dynamics and selectivity towards the main products (NO, N₂ and NH₃) within the short rich phase, and consequent development of the corresponding global reaction-kinetic model. An industrial NSRC monolith sample of PtRh/Ba/CeO₂/ -Al₂O₃ type is employed in nearly isothermal laboratory micro-reactor. The oxygen and NO_x storage/reduction experiments are performed in the temperature range 100–500 °C in the presence of CO₂ and H₂O, using H₂, CO and C₃H₆ as the reducing agents.The spatially distributed NSRC model developed earlier is extended by the following reactions: NH₃ is formed by the reaction of H₂ with NO_x and it can further react with oxygen and NO_x deposited on the catalyst surface, producing N₂. Considering this scheme with ammonia as an active intermediate of the NO_x reduction, a good agreement with experiments is obtained in terms of the NO_x reduction dynamics and selectivity. A reduction front travelling in the flow direction along the reactor is predicted, with the NH₃ maximum on the moving boundary. When the front reaches the reactor outlet, the NH₃ peak is observed in the exhaust gas. It is assumed that the ammonia formation during the NO_x reduction by CO and HCs at higher temperatures proceed via the water gas shift and steam reforming reactions producing hydrogen. It is further demonstrated that oxygen storage effects influence the dynamics of the stored NO_x reduction. The temperature dependences of the outlet ammonia peak delay and the selectivity towards NH₃ are correlated with the effective oxygen and NO_x storage capacity.     

Supported Heteropolyacids for NOx Storage and Reduction

TiO₂ and SnO₂ were studied as possible supports for HPW in order to produce a new type of sorbent for NO _x trap applications. SnO₂ was synthesised by various inorganic methods while TiO₂ was purchased commercially. The sorption capacities and efficiencies depend upon the BET surfaces. Best performances were obtained with support with large pores where the crystalline structure of HPW is maintained. The optimal loading of HPW is ca. 50% with BET surface in the range 20–80 m²g^–1.     

Influence of the Storage Material on the Storage of NOx at Low Temperatures

The NO _x storage performance at low temperature (100–200 °C) has been studied for model NO _x storage catalysts. The catalysts were prepared by sequentially depositing support, metal oxide and platinum on ceramic monoliths. The support material consisted of acidic aluminium silicate, alumina or basic aluminium magnesium oxide, and the added metal oxide was either ceria or barium oxide. The NO _x conversion was evaluated under net-oxidising conditions with transients between lean and rich gas composition and the NO _x storage performance was studied by isothermal adsorption of NO₂ followed by temperature programmed desorption of adsorbed species. The maximum in NO _x storage capacity was observed at 100 °C for all samples studied. The Pt/BaO/Al₂O₃ catalyst stored about twice the amount of NO _x compared with the Pt/Al₂O₃ and Pt/CeO₂/Al₂O₃ samples. The storage capacity increased with increasing basicity of the support material, i.e. Pt/Al₂O₃·SiO₂ < Pt/Al₂O₃ < Pt/Al₂O₃ · MgO. Water did not significantly affect the NO _x storage performance for Pt/Al₂O₃ or Pt/BaO/Al₂O₃.     

Non-Isothermal NOx Storage/Release over Manganese Based Traps: Mechanistic Considerations

The NO storage properties of MnO _x /support materials (5–50 wt% MnO _x loading) was experimentally investigated in the presence of O₂ and H₂O between 50 and 700 °C applying a non-isothermal temperature-programmed method. In dependence on MnO _x loading and NO supply, the materials show an intermediate decrease of NO storage capacity between 200 and 300 °C. This effect is caused by decomposition of surface nitrites with release of NO into the gas phase as proved by in situ DRIFT measurement. The interpretation is corroborated by modelling of the underlying adsorption/desorption reaction steps, considering the different thermal stability of nitrite/nitrate surface species.     

Selective Catalytic Reduction of NOx over H-ZSM-5 Under Lean Conditions Using Transient NH3 Supply

The selective catalytic reduction (SCR) of NO _x over zeolite H-ZSM-5 with ammonia was investigated using in situ FTIR spectroscopy and flow reactor measurements. The adsorption of ammonia and the reaction between NO _x , O₂ and either pre-adsorbed ammonia or transiently supplied ammonia were investigated for either NO or equimolar amounts of NO and NO₂. With transient ammonia supply the total NO reduction increased and the selectivity to N₂O formation decreased compared to continuous supply. The FTIR experiments revealed that NO _x reacts with ammonia adsorbed on Brønsted acid sites as NH₄ ⁺ ions. These experiments further indicated that adsorbed -NO₂ ^– is formed during the SCR reaction over H-ZSM-5.     

A New Simulation Model for NOx Storage Catalyst Dynamics

The NO _x storage concept has been studied experimentally and by two differently detailed numerical simulation models. The first detailed model simulates the concentration fronts of the solid components in the barium particles. It shows the slow, diffusion-hindered formation of dense nitrate layers around barium nanoparticles during NO _x storage and their rapid break-up during regeneration. Based upon this knowledge a new simplified model was developed which is able to describe well the storage and regeneration and to explain the main chemical and physical processes in the NO _x storage catalyst.     

An Optimal Usage of NOx in a Combined Pt/Ceramic Foam and a Wall-Flow Monolith Filter for an Effective NOx-Assisted Soot Oxidation

An NO₂-assisted soot oxidation based filter candidate consists of Pt-coated ceramic foam in combination with a wall-flow monolith is proposed to acquire for an optimal usage of exhaust NO _x . The configuration is designed to operate as deep bed filtration on Pt/ceramic foam and surface filtration on the wall-flow monolith. The oxidation of soot by NO₂ takes place by multi-cycle reaction in Pt/ceramic foam and by the normal CRT on the wall-flow monolith. The filter performs with a higher oxidation rate and a lower NO₂-slip.     

Characterisation by TPR, XRD and NOx Storage Capacity Measurements of the Ageing by Thermal Treatment and SO2 Poisoning of a Pt/Ba/Al NOx-Trap Model Catalyst

The deactivation of a Pt/Ba/Al₂O₃ NO _x -trap model catalyst submitted to SO₂ treatment and/or thermal ageing at 800 °C was studied by H₂ temperature programmed reduction (TPR), X-ray diffraction (XRD) and NO _x storage capacity measurements.The X-ray diffractogram of the fresh sample exhibits peaks characteristic for barium carbonate. Thermal ageing leads to the decomposition of barium carbonate and to the formation of BaAl₂O₄. The TPR profile of the sulphated sample shows the presence of (i) surface aluminium sulphates, (ii) surface barium sulphates, (iii) bulk barium sulphates. The exposure to SO₂ after ageing leads to a small decrease of the surface barium-based sulphates, expected mainly as aluminate barium sulphates. This evolution can be attributed to a sintering of the storage material. TPR experiments also show that thermal treatment at 800 °C after the exposure to SO₂ involves the decomposition of aluminium surface sulphates to give mainly bulk barium sulphates, also pointed out by XRD. Thus, the thermal treatment at 800 °C leads to a stabilization of the sulphates.These results are in accordance with the NO _x storage capacity measurements. On non-sulphated catalysts, the treatment at 800 °C induces to a decrease of the NO _x storage capacity, showing that barium aluminate presents a lower NO _x storage capacity than barium carbonate. Sulphation strongly decreases the NO _x storage capacity of catalysts, whatever the initial thermal treatment, showing that barium sulphates inhibit the NO₂ adsorption. Moreover, the platinum activity for the NO to NO₂ oxidation is lowered by thermal treatments.     

Influence of Catalyst Support Geometry and Wall Thickness on NOx Trap Desulfation: Rich/Lean Wobbling Strategies and Hexagonal Cell Supports for High SO2 Selectivity During Desulfation

This Synthetic Gas Bench (SGB) study focuses on the effect of cell geometry and wall thickness on the gasoline NO _x trap functionality. The data show that besides a NO _x trap efficiency improvement, hexagonal cells increase the sulfur resistance of the NO _x trap. This feature is explained by the different wash-coat distributions in the hexagonal channels compared to square ones. The effect of lean/rich fast switching (wobbling) during desulfation was investigated and the SO₂/H₂S selectivity was studied: the combination of hexagonal cells and a wobbling desulfation strategy improves the H₂S/SO₂ selectivity by reducing the amount of H₂S formed.     

Soot combustion activity of NOx-sorbing Cs–MnOx–CeO2 catalysts

Activities of Cs-loaded MnO_x–CeO₂ for combustion of model diesel soot (carbon black) and sorptive NO uptake have been studied. MnO_x–CeO₂ is a pseudo-solid solution having redox properties favorable for soot oxidation. The addition of Cs not only lowered the temperature of soot ignition (T_i), but also increased oxidative NO_x adsorption to form nitrate on the surface. Soot ignition over Cs–MnO_x–CeO₂ was further promoted in a stream of NO/O₂, presumably because nitrate on the surface plays a role of an oxidizing agent. Soot ignition started just before sharp desorption of NO_x, suggesting that adsorbed nitrate species would directly interact with soot.     

Silver supported mesoporous SBA-15 as potential catalysts for SCR NOx by ethanol

Reduction of nitrogen oxides (NO_x) in a lean exhaust gases has become one of the most important environmental concerns. This study compared the performances of DeNO_x and the properties of silver/mesoporous aluminosilica synthesized by different methods. Silver nanoparticles were obtained after calcination of the materials prepared by incipient wetness or by the excess solvent impregnation of Al-SBA-15 support by silver nitrate. On the other hand, the silver nitrate was introduced on the synthesis gel of SBA-15. The solid product was used as support to deposit aluminium. The effect of synthesis method on silver incorporation and the porous structure of the resulting solids has been examined. Some techniques had been applied, such as: elemental analysis, X-ray diffraction (XRD), N₂ sorption measurements and Transmission Electron Microscopy (TEM). The nature of silver species in these catalysts was investigated by XPS measurements, high angle XRD, high resolution TEM and TPR/H₂ (temperature-programmed reduction). The resulting materials were tested in the selective catalytic reduction of NO_x by ethanol in the presence of oxygen. Finally, the effect of H₂ on the DeNO_x activity was also investigated.The impregnation method of Al-SBA-15 by silver nitrate influences the size, the location of the particles and the catalytic activity. To maintain a higher DeNO_x activity, the percentage of aluminium loading and the feed of H₂ gases should be increased.     

NOx storage/reduction catalysts based in cobalt/copper hydrotalcites

The use of materials based on hydrotalcites as NO_x storage/reduction (NSR) catalysts has been investigated, examining their activity at low temperature and their resistance to poisons such as H₂O and SO₂. The results obtained show that catalysts derived from Mg/Al hydrotalcites containing copper or cobalt is active at low temperatures, specially the samples containing 10 or 15% of Co. The addition of 1 wt% of transition metals with redox properties such as Pt, Pd, V and Ru to the hydrotalcite increases its activity because the combination of the redox properties of these metals and the acid-base properties of the hydrotalcite. The best results were obtained with the catalyst derived from a hydrotalcite with a molar ratio Co/Mg/Al = 15/60/25 and containing 1 wt% V. This material shows a higher activity, at low temperatures and in the presence of H₂O and SO₂, than a Pt–Ba/Al₂O₃ reference catalyst.     

Steam resistant CoLa-mordenite catalysts for the SCR of NOx with CH4

The stabilization of Co-mordenite catalysts through lanthanum exchange is reported here. The effect of exchange order and calcination conditions upon the reduction of NO_x to N₂ at 500 °C was tracked during 400 h on a stream containing NO_x, CH₄, O₂ and 10% H₂O. Both the fresh and used catalysts were characterized through TPR, Raman spectroscopy, FTIR spectroscopy using CO as probe molecule, and XPS. These techniques revealed that the CoLa-mordenite catalysts which were not affected by the severe hydrothermal treatment showed no sign of Co or La migration out of the exchange positions. Instead, those that rapidly deactivated showed the formation of cobalt oxides and, in some cases, the migration of the cations to other exchange positions. The presence of exchanged lanthanum seems to preserve the integrity of the zeolite structure preventing the migration of cobalt ions with the subsequent formation of cobalt oxides which favors the reaction of methane with O₂, thus decreasing N₂ production.     

Platinum Oxidation and Sulphur Deactivation in NOx Storage Catalysts

Flow reactor experiments and X-ray photoelectron spectroscopy (XPS) measurements were used to investigate the importance of platinum oxide formation on Pt/BaO/Al₂O₃ NO _x storage catalysts during reactions conditions. The reaction studied was NO(g) + 1/2 O₂(g) NO₂(g). During NO₂ exposure of the catalyst the NO₂ dissociation rate decreased during the reaction. This activity decrease with time was also studied with XPS and it was found to be due to platinum oxide formation. The influence of sulphur exposure conditions on the performance of the NO _x storage catalysts was studied by exposing the samples to lean and/or rich gas mixtures, simulating the conditions in a mixed lean application, containing SO₂. The main results show that all samples are sensitive to sulphur and that the deactivation proceeds faster when SO₂ is present in the feed under rich conditions than under lean or continuous SO₂ exposure. Additionally, the influence of the noble metals present in the catalysts was investigated regarding sulphur sensitivity and it was found that a combination of platinum and rhodium seems to be preferable to retain high performance of the catalyst under SO₂ exposure and subsequent regeneration. Finally, the behaviour of micro-fabricated model NO _x storage catalysts was studied as a function of temperature and gas composition with area-resolved XPS. These model catalysts consisted of a thin film of Pt deposited on one-half of a BaCO₃ pellet. It was found that the combination of SO₂ and O₂ resulted in migration of Pt on the BaCO₃ support up to one mm away from the Pt/BaCO₃ interface.     

Excellent sulfur resistance of Pt/BaO/CeO2 lean NOx trap catalysts

In this work, we investigated the NO_x storage behavior of Pt/BaO/CeO₂ catalysts, especially in the presence of SO₂. High surface area CeO₂ (110 m²/g) with a rod like morphology was synthesized and used as a support. The Pt/BaO/CeO₂ sample demonstrated slightly higher NO_x uptake in the entire temperature range studied compared with Pt/BaO/γ-Al₂O₃. More importantly, this ceria-based catalyst showed higher sulfur tolerance than the alumina-based one. The time of complete NO_x uptake was maintained even after exposing the sample to 3 g/L of SO₂. The same sulfur exposure, on the other hand, eliminated the complete NO_x uptake time on the alumina-based NO_x storage catalysts. TEM images show no evidence of either Pt sintering or BaS phase formation during reductive de-sulfation up to 600 °C on the ceria-based catalyst, while the same process over the alumina-based catalyst resulted in both a significant increase in the average Pt cluster size and the agglomeration of a newly formed BaS phase into large crystallites. XPS results revealed the presence of about five times more residual sulfur after reductive de-sulfation at 600 °C on the alumina-based catalysts in comparison with the ceria-based ones. All of these results strongly support that, besides their superior intrinsic NO_x uptake properties, ceria-based catalysts have (a) much higher sulfur tolerance and (b) excellent resistance against Pt sintering when they are compared to the widely used alumina-based catalysts.     

Fundamental Investigations of Thermal Aging Phenomena of Model NOx Storage Systems

Investigations of the aging behavior induced by high temperatures coupled with oxidizing atmosphere of model NO _x storage systems Ba/Al₂O₃ and Ba/CeO₂ are reported in this paper. The samples were prepared, calcined and exposed to temperatures between 500 and 1000 °C in air for 12 h for thermal aging. Samples were characterized with XRD, HRSEM, DSC-TGA-MS and BET analyses. In XRD investigations of all model systems calcined at 500 °C for 2 h, the NO _x storage component was present in form of BaCO₃. The release of CO₂ as a result of the decarbonization of the NO _x storage component at increased temperatures was verified by thermogravimetric investigations. In the case of Ba/Al₂O₃, already during calcination a partial reaction of the NO _x storage component with Al₂O₃ resulting in the formation of barium aluminate was observed. In the model system Ba/CeO₂ the decomposition of the barium carbonate started above 780 °C and the formation of a barium cerium mixed oxide was observed. The presence of the barium containing NO _x storage component has a strong influence on the specific surface area of the model NO _x storage systems. The morphology and crystallite size of CeO₂ modified with the barium containing NO _x storage component exhibited distinct changes compared to the unmodified oxide. The NO _x storage efficiency determined by model gas tests of freshly prepared and engine aged model NO _x storage catalysts correlates well with the above described observations.